Repair Renovation works for IFCI Bhawan, Ahmedabad

Name of work:- Repair/Renovation works for IFCI bhawan ,Ahmedabad

/2023(Civil). DSR(E & M) NDSR

SL No. DSR-2023 DESCRIPTION AMOUNT 2025 AMOUNT

A CIVIL, INTERIOR AND EXTERNAL DEVELOPMENT

1 SUB 8.0 CLADDING WORK 994789.60 2477420.04

4 SUB 11.0 FLOORING WORK 2835986.47 0.00

5 SUB 12.0 ROOFING WORK 2279026.23 0.00

6 SUB 13.0 FINISHING WORK 2388923.53 0.00

7 SUB 15.0 DISMANTLING & DEMOLISHIONG 48938.87 0.00

8 SUB 21.0 ALUMINIUM WORK 579176.48 240515.54

9 SUB 22.0 WATERPROOFING WORK 1639533.69 1063364.06

10 SUB 25.0 STRUCTURAL GLAZING & ALUMINIUM WORKS 4666990.90

14 4 FIRE ALARM &FIRE FIGHTING 962368 78879.00

Add 6.33 % GST factor on DSR at SI no.11 and SI

17 no.14 (electrical +Mechanical) items for GST 1,90,864.50

18 Total DSR items (SI no. 16+ SI no. 17) 225,29,605.58

Total DSR items After Correction Factor @ .973 on SI

20 TOTAL OF DSR ITEMS 221,66,668.23

21 TOTAL AMOUNT of DSR & NDSR ITEMS 312,39,544.43

21 TOTAL AMOUNT of DSR & NDSR ITEMS 312,39,544.43

Digitally signed by ARTI

Repair/Renovation works for IFCI bhawan Ahmedabad

Ref DSR- DSR Amount NDSR Amount

Sl. No. Description of Item Unit Qty DSR Rate NDSR Rate DSR 2025 Location / Dwg ref

CLADDING WORK/ Wall f PT-CT-AR-PL-02-R5

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for wall lining (veneer work) including dado, skirting, risers of steps etc., in required

design and pattem wherever required, stones of different finished surface texture, on 12 mm

(average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement

slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of

matching shade, including rubbing, curing, polishing etc. all complete as per Architectural

25 M.R drawings, and as directed by the Engineer-in-Charge.

Granite stone slab colour black, Cherry/Ruby red Sqm 567.110 4368.50 2477420.04 Lift area wall cladding

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished,

machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy

touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc.

26 8.2 completeat all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red Sqm 187.956 5136.30 965398.40 Toilet Counter

8.2.2.2 Area of slab over 0.50 sqm 0.00

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine

polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-

8.3.2 Granite work R.M 8.200 510.95 4189.79 Toilet Counter

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and

28 8.4 drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. R.M 8.200 568.55 4662.11 Toilet Counter

Extra for providing opening of required size & shape for wash basins / kitchens sink in kitchen

platform, vanity counters and similar location in marble / Granite /stone work including necessary

29 8.5 holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. nos 14.000 978.70 13701.80 Toilet Counter

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm

deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of

30 8.10 Engineer-in-charge and finished smooth. 0.00 Urinal partition

8.10.2 Granite Stone of approved shade Sqm 1.6875 4051.85 6837.50

Total Carried over to summary 994789.60 2477420.04

WOOD & PVC WORK Dwg Ref PT-CT-AR-PL-01-R5

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (

31 9.1 hold fast lugs or dash fastener shall be paid for separately).

Toilet and lobby at all

9.1.1 Second class teak wood Cum 0.693 142949.70 99108.35 floor Frame.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard wood and well matched teak 3

32 9.2 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 0.00

Toilet and lobby at all

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 59.422 3473.85 206422.70 floor Frame.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges Toilet and lobby at all

33 9.23 of flush door shutters (over all area of door shutter to be measured). sqm 60.422 462.35 27936.06 floor Frame.

Digitally signed by ARTI

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs

34 9.40.1 and priming coat on unexposed surface etc. complete. 0.00

Toilet and lobby at all

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter

bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 Toilet and lobby at all

35 9.53 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Each 145 228.85 33229.02 floor Frame.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

36 9.100 screws etc. complete : 0.00

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less

than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts

37 9.96 and screws etc. complete : 0.00

Toilet and lobby at all

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary

38 9.97 screws etc. complete : 0.00

Toilet and lobby at all

39 M.R Providing and fixing a SS Buffer wall, ISI marked, with necessary screws etc. complete. Each 22 127.15 0.00 2797.30

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating

not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade,

40 9.101 with necessary screws etc. complete. 0.00

9.101.2 Twin rubber stopper Each 25.000 72.35 1808.75 Toilet at G/F and F/F

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly

reinforced with galvanized mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of

minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve

for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and

necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred

cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes

for fixing hardware and drainage of water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of

approved size and quality, all complete as per approved drawing conforming to CPWD

specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections

41 9.147 of uPVC profiles to be as per design approved by Engineer-in-Charge. 0.00

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high

performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall

be paid separately. 0.00

Note:- Structural design proof checked from a Government Engineering Institute, to be provided

by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii)

Sites with structure height more than 20m for all wind speeds 0.00

42 9.147.C1 Fixed window / ventilator without mullion / transom. 0.00

9.147.C1.3 Using R3 series with frame (55mm & above ) x (45mm & above). (Height upto 2.5 metre) Sqm 40.700 7080.05 288158.04

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC

43 9.149 casement window with necessary screws etc. complete. Nos 38 231.05 8779.90 Toilet Ventilator

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with

44 9.15 necessary screws etc. complete. Nos 38 204.00 7752.00 Toilet Ventilator

Digitally signed by ARTI

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60

mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not

less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The

frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame

will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal

style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS

ball bearinghinges of size 100x89x3 mm for fixing of fire rated glazed shutter. Theframe shall be

finished with an approved fire resistant primer or powdercoating of not less than 30 micron in

desired shade as per the directionsof Engineer - in- Charge. (Cost of SS ball bearinghinges is

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating

conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved

by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, op rail

& side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6 mm thick

G.I. sheet (zinc coating not less than 120 gm/ sqm) duly filled mineral wool insulation having

density minimum 96 kg/ cum and fixing with necessary stainless steel ball bearing hinges of ize

100x89x3 mm of approved make, including applying a coat of approved fire resistant primer or

powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge

46 9.162 (panelling to be paid for seperately). sqm 15.84 12017.90 190363.54

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I.

beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x

33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c

, including applying a coat of approved fire resistant primer/ powder coating of not less than 30

micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as

per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass of

required thickness having 120 minutes of fire resistance both integrity & radiation control

(EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the stamp showing the value of E, EW

& EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation

body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC

17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock

on back side of the Panic Latch of reputed brand and manufacture to be approved by the

48 9.139 Engineer- in- charge, all complete. Each 4 8366.15 33464.60

Total Carried over to summary 1026172.84 2797.30

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

10.2 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer Kg

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 780.00 172.60 134628.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with

10.28 necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Digitally signed by ARTI

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer

coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with

G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats

of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or

curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size

and shape wherever required.

12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² Sqm 57.60 1087.65 62648.64

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron

12.7 brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections

with rain water pipes complete.

12.7.2 0.63 mm thick with zinc coating not less than 275 gm/m² M 8.40 944.05 7930.02

Total Carried over to summary 1162580.02 0.00

FLOORING WORK DWG Reff PT-CT-AR- PL 01 Floor-1

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement

slurry mixed with pigment to match the shade of the slab, including rubbing and polishing

49 11.26 complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

11.26.1 25 mm thick. sqm 21 1948.25 40913.25 PUMP ROOM

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry

50 11.27 mixed with pigment to match the shade of the slabs, including rubbing and polishing complete sqm 3.24 2354.70 7629.23 PUMP ROOM

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as

well as curvilinear portions of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified

51 11.56 and as directed by the Engineer-in-Charge. 0.00

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 380.790 4481.30 1706434.23 Lobby

52 11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. R.M 789.533 719.90 568385.05 S/C

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

53 11.41A required thickness, leveling system and rubber mallet for placing the tiles gently and easily 0.00

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size 0.00

11.41A.3.1 Size of Tile 600 x 600 mm sqm 100.000 1464.85 146485.00 Toilet Area

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and

dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

54 8.31 matching shade complete. sqm 136.356 1267.95 172892.59 Toilet Area

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix of 0.70

kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

55 11.48 including filling /grouting and finishing complete as per direction of Engineer-in-charge. 0.00

11.48.2 Size of Tile 600x600 mm sqm 259.616 309.05 80234.32 Total Tile Area

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished

with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of

56 11.3 steps etc. complete. 0.00

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 184.000 614.20 113012.80 Basement area

Total Carried over to summary 2835986.47

ROOFING WORK DWG Reff PT-CT-AR-PL 01-R2 &R3

Digitally signed by ARTI

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1

m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a

57 12.22 coat of neat cement, rounding the edges and making and finishing the outlet complete Nos 10.00 298.25 2982.50

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine

58 12.21 sand) as per standard design : Sqm 180.00 305.15 54927.00

12.21.1 In 75x75 mm deep chase 0.00

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement :

4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,

including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting

59 12.55 upto 150 mm height along the parapet walls in the same manne sqm 784.80 1703.95 1337251.44 Terrace

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing compound ,

jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides

of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and direction of the

60 12.45 Engineer in Charge but excluding the cost of painting with : 0.00

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 %

perforated area with perforation size and pattern as approved by the Engineerin-charge and as

per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with

12.45.4 NRC value not less than 0.60 sqm 481.65 1744.15 840069.85 Lobby

Digitally signed by ARTI

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized

@ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints

to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced

at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of

1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm

thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved

texture in the grid including, required cutting/making, opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using

GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-

sections shall be pre-painted with polyester paint, all complete for all heights as per

61 12.52 specifications, drawings and as directed by Engineer-in-charge. 0.00

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and

0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction

Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum),

including factory painted after bending and perforation, and backed with a black Glass fiber

62 12.52.2 acoustical fleece. sqm 21.170 2068.75 43795.44 Toilet areas

Total Carried over to summary 2279026.23 0.00

SH-13 FINISHING WORK

15 13.4 12 mm cement plaster of mix

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare

16 13.26 the surface even and smooth complete. Sqm 1998.30 262.70 524953.14 Lobby and Toilet area

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel Quantity taken in

17 13.50.3 galvanised iron/ steel works Sqm 304.73 67.40 20538.65 lumpsum

Painting with synthetic enamel paint of approved brand and manufacture of required colour to

18 13.99 give an even shade 0.00

13.99.1 One or more coats on old work Sqm 300.00 102.80 30840.00

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

19 13.83 applying additional coats wherever required to achieve even shade and colour. 0.00

Paint on wall Lobby and

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden

20 13.116 shade texture with following process in the sequence as detailed below: Sqm 26.54 1,360.45 36107.69

The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of

Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and

2 2nd coat is allowed to dry for 8 to 12 hrs 0.00

On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to

remove excess sealer layer and make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the small and big holes/grooves

etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this

3 surface is further allowed to dry for 12 hrs 0.00

On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.

4 (Final coat to be done in 1 or 2 layers without gap of time.) 0.00

Digitally signed by ARTI

21 13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of

13.45.1 exterior primer applied @ 2.20kg/10 sqm Sqm 2638.50 223.60 589968.60

Total Carried over to summary 2388923.53

SH-15 DISMANTLING & DEMOLISHIONG

Door Lintel and other

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and work Qty taken on

1 15.3 disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cum 2.29 3551.25 8135.20 lumpsum basis

Demolishing cement concrete manually/ by mechanical means including disposal of material

2 15.2 within 50 metres lead as per direction of Engineer - in - charge. 0.00

15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum 2.00 2434.25 4868.50 Tantative

Demolishing brick work manually/ by mechanical means including stacking of serviceable Qty taken Tentative in

material and disposal of unserviceable material within 50 metres lead as per direction of existing Toilet and

3 15.7 Engineer-in-charge. Cum 16.91 2060.2 34827.68 Elec Room

15.7.4 In cement mortar 0.00

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking

4 15.13 within 50 metres lead : 0.00

Qty for Door in Toilet

5 15.13.1 Area 3 sq. metres and below Nos 28.29 143.5 4059.04 at G/F and F/F

35 % of Total area

Taken as Qty for

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material Floor dismantling

6 15.25 and disposal of unserviceable material within 50 metres lead. Sqm 179.80 266.45 47907.71 Tentative

Dismantling steel work manually/ by mechanical means in built up sections without dismembering

7 15.19 and stacking within 50 metres lead as per direction of Engineer-in-charge Kg 147.96 3.85 569.65 Tentative

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within

8 15.23 50 metres lead. 0.00

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 350.00 73.4 25690.00 Tentative

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including Quantity taken in

9 15.56 disposal of rubbish to the dumping ground within 50 metres lead Sqm 1161.02 54.65 63449.74 lumpsum

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling 65% quantity taken

including disposal of unserviceable material and stacking of serviceable material with in 50 for five floor for false

10 15.57 meters lead as directed by Engineer-in-charge. Sqm 300 56.35 16905.00 ceiling & Glazing

11 15.27 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Cum 10.15 914.3 9280.15 Terrace

Demolishing brick tile covering in terracing including stacking of serviceable material and

12 15.26 disposal of unserviceable material within 50 metres lead. Sqm 657 105.35 69214.95 Terrace

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting, unloading to approved municipal dumping

ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all Quantity taken in

13 15.6 lifts involved. Cum 85 263.95 22435.75 Lumpsum

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling

including disposal of unserviceable material and stacking of serviceable material with in 50

14 15.57 meters lead as directed by Engineer- in-charge. Sqm 330.00 56.35 18595.50 S/C

15 MR Credit for Dismantling Steel of lift etc. Kg 6000.00 -32.00 -192000.00

15 MR Credit for Dismantling Aluminium Kg 500.00 -170.00 -85000.00

Total Carried over to summary 48938.87 0.00

SH-21 ALUMINIUM & GLASS WORK

Digitally signed by ARTI

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing

/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

21.1.1 For fixed portion

64 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 351.05 530.90 186372.82

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever required including the cost of EPDM rubber /

21.1.2 neoprene gasket required (Fittings shall be paid for separately) 0.00

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 333.65 634.45 211684.12

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

65 21.3 directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00

21.3.3 With float glass panes of 8 mm thickness (weight not less than 12.50 kg/sqm) Sqm 66.56 1685.40 112173.31

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing

weather silicon sealant over backer rod of approved quality as per architectural drawings and

66 21.8 direction of Engineer-in-charge complete. 0.00

21.8.1 Upto 5mm depth and 5 mm width Rmtr 191.35 96.75 18513.11

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make

67 21.13 of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Each 6.54 528.85 3458.68

Providing & Fixing premium quality Manually operated Roller blinds with Solar protection fabric of

high tenacity Polyester Yarn with PVC Coating & Grey Backing, & offer 100% blackout / heat

radiance. Fabric shall have Indoor Air Quality & Children & School Certified. Weight: 300 to 350

g/m2 (+/-5%), Thickness: 0.47 to 0.55 mm (+/-5%), Fabric Openness Factor: 0%, Tensile

Strength (Warp/Weft): 160/170 daN / 5cm, Tearing Strength (Warp/Weft): 11/13 daN, Solar

Transmission- 0%, Solar Reflectance 25-69%, Solar Absorption 28-31%, Fungistatic Treatment:

68 NDSR Degree 0, Excellent (EN ISO 846-A). including the all fittings and fixtures Complete Sqm 73.21 3216.04 0.00 235451.08

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor

spring type fixing arrangement and making necessary holes etc. for fixing required door fittings,

all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid

Providing & fixing set of Stainless Steel door handle of 25mm dia 600mm length, including all

70 NDSR accessories Complete Each 2 1734.32 0.00 3468.64

Providing & fixing set of Stainless Steel Glass door Lock Size 7.6x5.1x3.8 cm round type with

71 NDSR Authenticity Card Glass to Glass Door Lock (Set of 1) including all accessories Each 1 1595.82 0.00 1595.82

Total Carried over to summary 579176.48 240515.54

WATERPROOFING WORK

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying : (a)

First layer of slurry of cement @ 0.488 kg/sqm mixed with

water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4

hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, Toilet at all floor

21 22.5 corners, junctions of pipes and masonry with polymer mixed slurry.) Sqm 15.72 617.05 9698.92 sunken area

Digitally signed by ARTI

22 22.14 Grading roof for water proofing treatment with 0.00

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

Surface preparation: a suitable surface free dirt, depression etc laid in slope requisite for

these kinds of waterproofing treatments. Before starting the waterproofing treatment,ensure

that the substrate is free from dust, laitance, debris, etc, if any cracks and

cervices,honeycombs etc shall be properly and making fillets(wattas/gola) 50mm x 50mm in

a concaveprofile by using SBR Latex polymer modified mortar in a ratio 1:3 (cement: sand)

First Step: Primer

Apply primer coat of solvent based epoxy primer by roller/ airless spray consumption @0.20-

0.25 kg/sqm depending on porosity of concrete, consumption can increase, to the entire

surface and up to 300mm to the vertical into the chased cut groove of 25x25mm. Allow to

cure for max 5-6 hours and allow to come to touch dry condition.

Over the cured primer, applying high performance, pure polyurethane, free from tar &

23 M.R bitumen, cold applied, single component elastomeric moisture cure polyurethane solvent Sqm 960.2175 1107.42 0.00 1063364.06

based waterproof coating of approved make, in two to three coats minimum consumption

@1.8-2.25kg/sqm to achieve minimum DFT of 1.5mm thickness to the Polyurethane coating

shall meet the requirement of ASTM/EN Standard and coating shall have following properties

i) Solid % :>90(as per ASTM D 6511/EN3251), ii) Tensile Strength: >4 Mpa(as per ASTM

D412EN 12311-2), iii) Elongation > 450% (as per ASTM D412/EN 12311-2), iv) Hardness

Shore A: 70 (as per ASTM D2240).v) Adhesion to concrete - > 2 N/mm2 (ASTM D4541/ EN

1542) and crack bridging >2mm (as per ASTM C 836/EN 1062-7), over the entire sprayed

polyurethane foam insulation and reinforcing the entire waterproofing with 40GSM spun bond

scrim cloth between the two cloth , while the first coat is wet. Apply the second coating when

first coat is dried but not later than 48hrs of the first coat and terminating it into the chased

cut groove with the help of aluminum strip and sealing the groove with polysulphide sealant

or polymerized cement etc all complete as per specs or engineer in charge. All complete shall

be done by the authorised and experienced applicator of manufacturer.

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of

thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the

24 14.92 membrane by Butane Torch as per manufactures recommendation. Sqm 960.2175 88.9 85363.34

Total Carried over to summary 1639533.69 1063364.06

Structural Glazing and Aluminium

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5

or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to

AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item

includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of

extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of

72 25.1 aluminium extruded section shall be taken for purpose of payment. Kg 3971 414.3 1645185.3

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

system of structural glazing (with open joints) for linear as well as curvilinear portions of the

73 25.2 building for all heights and all levels, including: Sqm 418 3510.5 1467389

(a) Structural analysis & design and preparation of shop drawings for the specified design loads

conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind

pressure without any failure), including functional design of the aluminum sections for fixing

glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets,

screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire

stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure

equalisation & drainage and protection against fire hazard including:

Digitally signed by ARTI

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5

brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement

for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/

masonry/structural steel framework of building structure using stainless steel anchor fasteners/

bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel

grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather

silicone sealant compatible with the structural silicone sealant of required bite size in a clean and

controlled factory / work shop environment, including double sided spacer tape, setting blocks

and backer rod, all of approved grade, brand and manufacture, as per the approved sealant

design, within and all around the perimeter for holding glass

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes,

shapes and profiles, as required as per the site conditions, to seal the gap between the building

structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to

make it watertight, by incorporating principles of pressure equalization, providing suitable gutter

profiles at bottom (if required), making necessary holes of required sizes and of required numbers

etc. complete. This item includes cost of all inputs of designing, labour for fabricating and

installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental

charges including wastages etc., enabling temporary structures and services, cranes or cradles

etc. as described above and as specified.

The item includes the cost of getting all the structural and functional design including shop

drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also

includes the cost of all mock ups at site, cost of all samples of the individual components for

testing in an approved laboratory, field tests on the assembled working structural glazing as

specified, cleaning and protection till the handing over of the building for occupation. In the end,

the Contractor shall provide a water tight structural glazing having all the performance

characteristics etc. all complete as required, as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as directed by the Engineer- in-

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium

section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel

wire mesh shall be paid for separately under relevant items under this sub- head. However, for

the purpose of payment, only the actual area of structural glazing (including width of grooves) on

the external face shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing system if area

of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by

NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of

Science & Technologies, India. Cost of testing is payable separately.

The NIT approving authority will decide the necessity of testing on the basis of cost of the work,

cost of the test and importance of the work. Performance Testing of Structural glazing system

Tests to be conducted in the NABL accredited lab or any other accreditation body which operates

in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as

per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a

range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a

range upto 2000 ml

Digitally signed by ARTI

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design

wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative

test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-

sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as

required and specified, comprising of an outer heat strengthened float glass 6mm thick,

ofapproved colour and shade with reflective soft coating on surface # 2 of approved colour and

shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm

wide,dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all

complete for the required performances, as per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be

73 25.3 assembled in the factory/ workshop of the glass processor.

(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2,+ 12mm

Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible

Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light

reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2

degree K etc. The properties of performance glass shall be decided by technical sanctioning

74 (i) authority as per the site requirement. Sqm 418 3718.7 1554416.6

Electrical works

Ref DSR- DSR Rate

2022/MR Description of Item Unit Qty 2022/2025/MR NDSR Rate

DSR Amount (In Rs.) NDSR Amount (In Rs.)

A Distribuition Boards

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,

240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without

2.3 MCB/RCCB/Isolator)

1 2.3.3 12 way, Double door Each 13 2315 30095

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

2.4 without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit

breaker suitable for inductive load of following poles in the existing MCB DB complete with

2.10 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB

2.12 complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB

2.14 DB complete with connections, testing and commissioning etc. as required.

Providing and fixing following rating and breaking capacity and pole MCB with thermomagnetic

release and terminal spreaders in

existing cubicle panel board including drilling holes in cubicle panel,

making connections, etc. as requred.

Digitally signed by ARTI

Total of Distribuition Boards 284298 16908

B Wiring System

Wiring for light point/ fan poinV exhaust fan point,' call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface I recessed medium class PVC conduit,

with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell pent (Wthout

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated Single core Cable in surface/

recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

1.55 conductor single cycle cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed PVC conduit alongwith I NO. 4 sq. mm FRLS PVC insulated copper

9 1.12 conductor single core cable for loop earthing as required, Meter 1120 334 374080

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

10 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 1280 275 352000

11 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 800 334 267200

12 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 240 439 105360

Total of Wiring/submain wiring 1546339 0

C Power Receptacles

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

15 1.24.4 3 pin 5/6 amp socket outlet Each 88 122 10736

16 1.24.5 6 pin 15/16 amp socket outlet Each 60 197 11820

Supplying and fixing following sizes/ modules,GI Box along with modular base & cover plate for

1.27 modular switches in recess etc. as required.

Total of Power Receptacles 91812 0

D SITC of Lighting & Fans

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120

Digitally signed by ARTI

Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter

(Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic

diffuser and construction as per IS :10322 with driver as per the requirement with Driver efficiency

>85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to

40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD <

10% , P. F.≥0.95, IP20, CRI>80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be

below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with

70% of initial Lumen maintained till life ends ,

CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation

Color Matching) <3, Maximum power consumption should not more than the specified rating and

Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in

all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core

cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy

≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required

for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by

Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing

such that LED junction temperature shall not rise above 90°C)

SITC of pre-wired minimum 450mm, 10Watt LED Light fitting (Application as Mirror Light)

complete with all accessories, housing made of Extruded Aluminium, System Efficacy ->100

LPW or above and a minimum system lumen output of >1000 lumens with CRI >80, 6500K ANSI

21 MR-2 BIN. suitable for 220 V Each 14 824 11536

Supply, Installation, Testing & Commissioning of 10W surface mounted Bulkhead light with

5700K ANSI BIN, made of PDC aluminium housing having powder coating with high efficiency

PC diffuser for homogeneous light distribution. Fixture should have minimum efficacy at System

22 MR-3 level (Not Chip Level) ≥85 lumens/watt and a minimum system lumen output of >850 lumens. Each 24 534 12816

SITC of exhaust fan of 1440 RPM of 250mm (9") size with bracket blades complete for Heavy

23 MR-4 duty suitable for operate on 230V 50Hz, AC Supply . Each 14 1655 23170

Total of Lighting & Fans 245362 47522

E Earthing Protection

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of

25 5.4 2.7 metre long etc. with charcoal/ coke and salt as required.(For Panel & Lift) set 6 7472 44832

26 5.15 Providing and fixing 25mmx 5mm G.I.Strip on surface or in recess for connection etc as required. RM 180 244 43920

Total of Earthing Protection 88752 0

Supply of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100

volts grade, cross-sectional area as follows

Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV

grade of following size on wall surface as required.

29 7.7.1 up to 35 sqmm.(clamped with 1 mm thick saddle) Mtr 300 55 16500

30 7.7.3 Above 95 sq.mm and upto 185 sq.mm(Clamped with 25/40x3 mm MS flat clamp) Mtr 100 153 15300

Supplying and making end termination with brass compression gland and aluminium lugs for

following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Digitally signed by ARTI

TOTAL CARRIED TO SUMMERY 41668 154800

33 MR-7 Floor Panel

1 nos. 300 amps, 4 Pole MCCB with microprocessor based release for complete LSIG

protections and suitable for 415V, 50 Hz, A.C Supply and having Ics = Icu= 50 KA. The MCCB

i. shall be complete as per technical specifications and single line diagram.

0-500 volts digital electronic volt meter with selector switch and protected by 2 amps TP

ii. MCB's. - 1 set

0- 300 Amps digital electronic ammeter with selector switch and 3 nos. 200/5 amps, Bar

iii. Primary, 15 VA Burden, CL 1 accuracy CTs . - 1 set

iv. 3 nos. Phase indicating light protected by 2 amps SP MCB's.- 1 set

v. Breaker ON / OFF / TRIP indicating lights with control MCB’s.- 1 set.

Electronic Digital Load Manager with ready RS485 communication port and MODBUS

vi protocol. - 1 set

300 Amps uniformly rated, continuous duty, 415 V AC, 3 Phase and Neutral electrolytic grade

99.95% purity Tinned Copper (Throughout the length) busbars with colour coded heat shrink

i. sleeves supported on SMC type grip supports, 50 KA for 1 sec.

2 no. 125 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA included

Energy meter with RS 485 port. The MCCB shall be complete as per technical specifications,

i. single line diagram

2 no. 100 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 36 KA included

Energy meter with RS 485 port. The MCCB shall be complete as per technical

ii. specifications, single line diagram(For Laboratory 11 ).

10 no. 63 amps Four pole MCCB with thermal magnetic based release for overload and short

circuit protections and suitable for 415V, 50 Hz, A.C supply and having Ics=Icu= 25 KA with

Energy meter with RS 485 port. The MCCB shall be complete as per technical specifications,

iii. single line diagram (For Power DB-CA_2F, DB-Staff room & DB-office area).

Floor panel(FF) Set 2 187085 374170

34 MR-8 LIFT PANEL

Design, manufacture, supply, installation testing and commissioning of 2 mm thick MS sheet steel

fabricated cubicle type sub-distribution board, main frame fabricated out of 14 gauge CRCA sheet steel

and partition fabricated out of 16 gauge in cubical formation, dust and vermin proof, complete with hinged

detachable and lockable doors. Main distribution board shall be outdoor type floor mounting and of dead

front contruction, complete with interconnections by copper tapes/wires and painting. Cable entry from

top/bottom shall be provided in all the panels.

LIFT PANEL (in Lift Machine Room)

1 No. 100 amp 4 Pole Auto Transfer Switch (ATS)

1 No. 100 amp TP MCCB 25 KA service breaking capacity with heavy duty solid neutral link.

1 No. Ammeter with ASS

1 No.Voltmeter with VSS

3 Nos. phase indication lamps. (R, Y, B)

1 No.Digital KWH meter with required CT’s.

Digitally signed by ARTI

1 No. 150 amp TPN Aluminium Bus bar of suitable length.

5 Nos. 63 amps TPN MCCB's of 25 KA service breaking capacity.

2 Nos. 40 amps DP MCB of 10 KA service breaking capacity.

Lift Panel described as above

Lift panel set 2 1,24,806.00 249612

TOTAL CARRIED TO SUMMERY 623782

TOTAL COST OF Electrical 2052869 843012

Ref DSR- DSR Amount NDSR Amount

Sl. No. 2023/MR Description of Item Unit Qty DSR Rate NDSR Rate (In Rs.) (In Rs.)

Design, Fabrication, Supply, Installation, Testing & Commissioning of Electric Traction Type fully

automatic Machine room less (MRL) Passenger Elevator having SS Enclosure (Grade 304) with

AC variable voltage & variable frequency drive unit suitable for operation on 415 +/- 10 % V, 3

Phase, 50 Hz. AC supply, having speed of 1.00 MPS, power operated SS center opening

type car & landing doors, electro-magnetic brake system, operating panel with luminous buttons,

overload warning indicator, battery operated alarm bell, emergency light, intercom suitable for

hook up to Facility's EPABX, infrared red sensing door protection for full height (min 2100mm

height) & mechanical safety by pressure sensor, reverse phase relay on controller, fire man's

switch at ground floor, digital car positions indicator in car with up / down direction indications,

light fixtures, ventilation fan, landing sill, main beam in shaft for machine, pit ladder, provision of Each 2 18,96,200.00 3792400

lighting in elevator shaft etc. complete with all accessories serving different floors in the lift shaft

alongwith Automatic Rescue Device (ARD) with dry maintenance free sealed batteries

and Manual Emergency Rescue Device with or without lever operated (independent of any

battery system) complete as required and as per enclosed specifications for each MRL elevator

with following characteristics i) Elevator Type - Passenger ii) Capacity- minimum 8 Passenger ,

544 Kg iii) Stops and Openings- 8 No iv) Aproximate Travel- 30 meters approx v) Travel Speed-

Dismantling the existing 8 Passenger lift of all types travelling G+B+6 floors (8 Landings/8 Stops) having

with auto/manual operated doors for lift car & all landings with door frames, guide rails, controller, wiring

buffers, Lift Machine, ropes complete with all allied accessories of Lift and making the site clear in all

respect complete with refilling the holes with cement mortar & making the site as original this job includes

transportation of the dismantled material up to division/section store and handing over to the Client.

Total of Lift 3970574.00

A Sanitary Fixtures

Providing and fixing white vitreous china extended wall mounting water closet of size

780x370x690 mm of approved including providing & fixing white vitreous china cistem with dual

flush fifing, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover,

2 and cistern fittings, nuts, bolts and gasket etc complete. Each

17.7A Providing and fixing Wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer 0

5 of approved quality and make, including painting itings and brackets, the reuired

6 (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CPBrass single hole basin mixer Each 12 3960.55 47526.6

Providing and fixing wash basin with Cl- brackets, 15 mm CP brass pil PS, 32 mm C.P. brass

17.7 waste of standard pattem, including painting fittings and brackets, cutting and making goad the 0

walls wherever requ

White Vitreous China Angle back wash basin size 600 x 480

mm with single 15 mm C.P. brass pillar tap Each

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the

back for the rec tion of i and fittings. Each

Digitally signed by ARTI

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and 0

8 making good the walls wherever re uired

9 17.10.1 Kitchen sink with drain board 0

splying and fixing of Waste coupling'-full thread 32MM,Range:Allied,Material:Brass,Descriptio

12 :Waste Coupling --Full Thread 32MM Each

Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the

13 direction of Engineer-in-charge. Each

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings com

17.16A Providing and fixing 8 mm dia C.R 1' S.S. Jet with flexible tube upto 1 metre long with S.S- 20 349.15 6983

16 triangular plate to Eureopean W.C- of quality and make as approved by Engineer - in - charge. Each

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS

standards and weighing not less than 810 gms..

17 18.50.1 15 mm nominal bore Each 20 820.7 16414

18 17.34 Providing and fixing toilet paper holder : 0

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

17.31 complete with 6 mm thick hard board ground fixed to cleats with C.P. brass screws and washers 19 1607.95 30551.05

21 complete.. Each

MR-2 Providing and fixing of C.P Towel rail with all accessories as per approved specifications, with 19 1,020 0 19378.48

23 600 mm length, S 304, and making good the walls wherever required. Each

MR-3 Providing and fixing of Soap Dish with all accessories as per approved specifications of material 19 667 0 12676.99

24 304 stainless steel with chrome plating and making good the walls wherever required. Each

Providing and fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw

25 complete as required. Each

Providing and fixing C.P. brass angle valve for basin mixer of approved quality conforming to

Providing of FLOOR DRAIN WITH HOLE AND COCKROACH TRAP, Dimensions - 5X5 INCH, Material: Stainless

28 steel 304, Finish: Steel, Warranty : 1 Year

Supplying and installation of ULTRA THIN STAINLESS STEEL HAND DRYER (HEAVY DUTY)

MR-6 Construction : 304 Stainless Steel, Mounting : Wall Mounted, Operation : Infrared Automatic, 1 20011.98 0 20011.98

Switch: Hot & Cold Option, Hand Dry Time : 7 to 12 Sec, Auto Cutoff : 60 Seconds, Motor : Brush

30 AC Type. Each

Providing and Fixing of basin pillar cock HoseRange: Florida Series, Material : Brass Size(mm):

135(L) x 40(W) x 120(D) Each

Providing and Fixing of Single Lever sink Mixer Without Pop-Up Waste With Braided

HoseRange: Riviera Series, Material : Brass

Size(mm): 165(L) x 45(W) x 290(D)

Total Amount 553043.45 161911.95

Total Amount 553043.45 161911.95

Digitally signed by ARTI

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pig— having thermal stability for hot

18.7 & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

32 cement and testing of joints complete as direction of Engineer in Charge-I

Internal work - Exposed on wall

33 18.7.2 20 mm nominal dia Pipes Metre 96 335.00 32160

34 18.7.3 25 mm nominal dia Pipes Metre 121 401.55 48587.55

35 18.7.4 32 mm nominal dia Pipes Metre 83 518.75 43056.25

36 18.7.5 40 mm nominal dia Pipes Metre 52 702.95 36553.4

36.1 18.7.6 50 mm nominal dia Pipes Metre 50 934.15 46707.5

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipæ, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with

18.8 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent 0

cement and the cost of cutting chases and making good the same including testing of joints

complete as direction of Engineer in Charge. Concealed work, including cutting chases and

making gocxd the walls etc.

Concealed work, including cutting chases and making good the walls etc. 0

18.8.1 15 mm nominal dia Pipes Metre 30 497.8 14934

18.8.2 20 mm nominal dia Pipes Metre 40 537.6 21504

18.8.3 25 mm nominal dia Pipes Metre 78 627.25 48925.5

18.8.4 32 mm nominal dia Pipes Metre 72 739.30 53229.6

37 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0

18.19.2.1 Horizontal Each 4 791.9 3167.6

18.19.3.1 Horizontal Each 4 952.6 3810.4

Providing and fixing gun metal gate valve with C.I. wheel of approved

40 quality screwed end

41 18.17.1 25 mm nominal bore Each 12 622.40 7468.8

43 18.17.2 32 mm nominal bore. Each 4 689.60 2758.4

44 18.17.3 40 mm nominal bore. Each 4 826.10 3304.4

Providing and fixing ball valve (brass) of approved quality, High or Low pressure with Plastic

floats complete

18.18.2 15mm mm nominal bore Each 9 462.50 4162.5

18.18.3 20 mm nominal bore. Each 9.00 464.05 4176.45

45 RO SYSTEM 0

Supply and fixing the water cooler 40/80 PSS-80 Litrewith normal-cold- hot tap.inbuilt water

purifier.water cooler capacity

storage capacity 80 L,

cooling capacity 60 litre /hr

Refrigrant R134a

Body material Stainless Steel

Number of faucet:- 1W+1C Faucets Cold & Warm Water cooler

storage tank:- yes

Dimension : 461x621x1311 mm

46 Gross weight:-45.6 Kg Each

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by

Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will 0 0

49 be paid separately) :

18.14 Fixing Water meter and stop cock in G.I. pipe line including cutting and threading the pipe and 3 812.30 2436.9 0

51 making long screws etc. complete (cost of water meter and stop cock to be paid separately). Each

Digitally signed by ARTI

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar I :4 (1 cement : 4

coarse sand) for sluice valve, With C.I. surface box 100 mm top diameter, 160 mm bottom diameter and

180 mm deep ( inside) with chained lid and RCC top slab mix (I cement : 1.5 coarse sand : 3 graded stone

aggregate 20 mm nominal size ), including necessary excavation, foundation concrete 1 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (I

cement : 3 coarse sand) 12 mm thick, finished with a floating coat Of neat cement complete as per

standard desi n :

113 18.35.1 With common burnt cla F.P.S.(non modular bricks of class designation 7.5 Each 1 26163.4 26163.4

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,

18.48 with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow 20000 11 220000

pipes but without fittings and the base support for tank. per liter

Providing IoTfiers AquaAunty Water Level Indicator with Tank Full Musical Alarm, 1 Year

54 Warranty, 4 Level Indication, Easy Videos Installation, (5 SS Sensors Included) Each

Total of water supply 641929.4 43279

SEWERAGE & DRAINAGE NETWORK

Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system and rainwater conforming

to IS : 13592 (Type-B) and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-

tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for

connections to other materials, plugs, reducers, cowls, offset and other specials. Jointing shall be

done with push fit EPDM ring jointing technique in general. Solvent cement joints may be

provided for fittings and specials which are not manufactured with push fit rubber joints. Fixing at

wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection

and also pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in

sunken floor shall be encased with not less than 75 mm thick cement concrete (1:2:4) all around.

The installation shall be complete in all respects including cutting chases / holes in walls, slabs

and making good the same as per specifications. (All major MS structure to hold the stack is

included in this item).The Pipes will be supported with threaded G I rods & clamps on 50x50x5

55 mm slotted angle. The cost will include all support arrangements.

56 MR-11 40 mm diametre metre 71 274.56 19494

57 MR-12 110 mm diameter metre 78 538.34 41991

58 MR-13 160 mm diameter metre 130 997.22 129639

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1

19.27 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame

59 complete as per standard design ::

60 19.27.1. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 6 5957.9 35747.40

Providing and fixing square-mouth S.W. gully fap class SP-I completewith C.I. grating brick

masonry chamber with water tight C.I. cover with frame of 450 x 450 mm size (inside) the weight

61 of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

62 19.4.3 180x150 mm size P type 0.00

63 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class desi nation 7.5 each 8 2802.15 22417.20

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-

III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

64 nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm

19.7.1 internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 0.00

65 kg and weight of frame 15 kg) :

Digitally signed by ARTI

66 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4 12770.55 51082.20

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm

19.7.2 internal diameter, total weight of cover and frame to be not less than 116 kg (weightof cover 58 0.00

67 kg and weight of frame 58 kg)

68 19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4.00 26405.50 105622.00

Making connection of drain or sewer line with existing manhole including breaking into and

making good the walls, floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand : 4 graded

stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3

(1cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary

69 channels for the drain etc. complete for pipes 100 to 250mm dia.

70 19.21.1 For pipes 100 to 250 mm diameter each 4 810.45 3241.80

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G. S. sheet gutter with iron

12 brackets 40x3 mm size, bolts, nuts and washers etc., includin makin necessa connections with 0.00

71 rain water i com lete.

72 12.7.1 0.80 mm thick with zinc coating not less than 275 gm/m7 metre 280.00 1029.65 288302.00

Total Amount 506412.60 191122.88

Total Amount 506412.60 191122.88

TOTAL AMOUNT 1701385.45 396314.27

TOTAL AMOUNT 1701385.45 396314.27

FIRE ALARM AND FIRE FIGHTING

Reff / DSR AMOUNT NDSR AMOUNT

Unit QTY DSR-RATE NDSR-RATE

SN DSR-2022 Description (INR) (INR)

Supply Installation, testing & commissioning of 4 loop microprocessor based intelligent and electronically

addressable, modular, with networking card & printer port- loops panel (expandable) with each loop

capacity of 159 detectors. Fire alarm control panel with 5.7 inch touch screen LCD display, multiple access

levels 10,000 event history logs in the nonvolatile memory (EEPROM). The panel should be modular

microprocessor based in nature and should be expandable from single loop to up to 32 loops. The panel

shall have 240V AC power supply, automatic battery charger, 24 V, ceiled lead acid maintenance free

batteries sufficient for 24 hours back up Provision for integration to BMS back net software. The panel

shall be EN 54/UL certification

2 17.2.1.2 Two Loop Panel. Each 1 239225 239225

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector

4 complete with mounting base complete as required. Each

Supplying, installation, testing & commissioning response indicator on

17.2.5 surface/recess MS box having two LEDs metallic cover complete with all 8 276 2208

5 connections etc. as required. Each

7 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Each 8 3270 26160

17.2.9 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of 8 2726 21808

8 rise cum fixed tempreature thermistor complete with base as required. Each

9 Supplying, installation, testing & commissioning of addressable fire control module complete as required. Each

11 Supplying, installation, testing & commissioning of addressable manual call point complete as required. Each

12 17.2.15 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. Each 8 3506 28048

17.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper 72 173 12456

19 conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Mtr

24 FIRE FIGTING

18.4 Terrace Pump

Supplying, installation, testing and cnmmissioning of electric driven

(A) terrace pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Pump)

Horizontal type, multistage, æntrifugal, split casing pump of cast

(B) iron body & bronze impeller with stainless steel shaft, mechanical

Digitally signed by ARTI

Suitable HP squirell cage induction motor TEFC type suitable for

(C) operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of

protection for enclosure, horiziontal foot mounted type with Class-'F'

M.S. fabricated comrnon base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads.

Providing, laying, testing & oommissioning of 'C' class heavy duty MS pipe conforming to IS 3589/1S 1239

18.7 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on 0

the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic

46 enamel paint of required shade complete as required

Supplying and fixing Single headed internal hydrant valve With instantaneous Gunmetal/StainIess Steel

18.9 coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) With blank 0

65 Gunmetal/StainIess Steel cap and chain as required ::

66 18.9.1 Single headed Gun metal Each 8 7646 61168

18.11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required

Supplying and fixing orifice plate made out Of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange & landing valve of external and

77 internal hydrants to reduce pressure at the outlet tothe level of 3.5 kg/cm2 complete as required. Each

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:

5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly

85 bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required

87 /16.8 Providing and fixing in position the industrial type pressure gauges with gun metal/ brass valves complete as required Each

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming

88 to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585

90 (b) 20 mm nominal internal dia gun metal globe valve & nozzle.

91 (c) Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe

92 and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe With 20 mm nominal internal diameter size

18.18 nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as 0

Digitally signed by ARTI

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet

18.19 couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 0

96 as required:

97 18.19.1 2 way-100 mm diaM.S. Pipe Each 1 6742 6742

103 18.22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each 10 1546 15460

Providing & fixing flow switch in following sizes M.S. pipe including

104 connection etc as required.

111 VALVE CHAMBERS 0

Providing and fixing resilient rubber neoprene lined single vibration elimination connection with unit 0

119 control suitable for raw water upto 45 deg.C. temperature working pressure 20 kg/Sq.Cm.

122 Providing and fixing standard firemans axe with heavy insulated rubber handle tested for 20000 watts Nos

131 FIRE DOOR ,Supply,installation and packaging 0

Supply of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade,

133 cross-sectional area as follows

135 Supply, installation, testing and commissioning of following cables: 0

136 MR-5 2 Core 2.5 Sqmm, unarmoured ATC copper conductor multistranded, cable. Mtr 32 237.00 7584

4 buckets set with sand, self-supported M.S. stand i/c shed duly painted with red colour as per IS.

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body,

squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long

high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished 0

externally with re enamel paint and fixed to wall with brackets complete with internal charge.

155 MR-7 Capacity 6 Kg. Nos. 1 7,483.00 7483

Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body,

squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long

high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished 0

externally with re enamel paint and fixed to wall with brackets complete with inernal charge.

Total Amount 962368 78879.00

Total Amount 962368 78879.00

Digitally signed by ARTI