PROVISION OF HOT CRANE OF THREE TONNE CAPACITY IN GUNWHARF STORE ROOM AT AR AND M UNIT NAVAL BASE KOCHI

Amount

Design, fabrication, supply, erection, test and commissioning hand operated overhead crane (HOT) for not exceeding 8.50 mtr Approx. span of capacity 3 ton including crane rail , Clear lift not exceeding 4.5m, chain and pulley block and travelling trolley suitable square bar for long travel movement of the bay length not exceeding 12.5m both side class II with LT wheel dia suitable double flanged straight thread, dia as per relevant IS complete with mini and micro movement facility all as specified and as directed. Make:- M/s Safex Energy Pvt ltd / M/s Pioneer cranes & Elevators Pvt Ltd /M/s Anupam Industries Ltd / M/s Dinesh Enterprises / Mukund Ltd / Tata robin fraser / Bombay power lift / Mcnally Bharath Engg Co Ltd / M/s Tractors India Ltd / M/s Tyojam.

Demolition of unreinforced cement concrete of any description in any position not otherwise specifically provided for including removal of all demolished material to outside MD land complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of column and similar work; vertical or to batter complete all as specified and directed.

S&F Rolled steel sections conforming to Fe 410 -W (Gde E- 250) quality 'A' as in main and cross beams, hip and jack rafters; stanchions, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

M & L for Reinforced cement concrete RMC (design mix) M-30 grade( 20 mmgraded aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs of main mast etc complete all as specified and directed

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise Superficial Area N exc 100 sqcm complete all as specified and directed.

Running welding in repairs Exc 6 mm but n exc 9mm complete all as specified and directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long Diameter of neck exc 12mm but nexc 20mm complete all as specified and directed.

M&L Plain Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L 40mm thick Plain Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor finished the concrete surface even and smooth using extra cement complete all as specified and directed.

M&L for preparing of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

PS James

Aarjay Tech Engineering

ANIE JOHN CONTRACTORS