Repairing of Engine piston ring, Silencer, front and rear Leaf spring, main Chassis and Cross member of Service Van reg. no. JH10AC6960 at Block-IV OCP of Govindpur Area-III, BCCL.

Amount

Item Description/ Heading

A) 1. Engine Piston Ring New Changing & Fitting. a. Fitter – 02 nos., 02 shifts each. b. Helper – 02 nos., 02 shifts each. 2. Engine Cylinder Liner New Changing & Honing 06 nos., Engine Connecting bush, pin new changing and reaming for machining job. a. Machinist – 02 nos., 02 shifts each. b. Fitter – 02 nos., 02 shifts each. c. Helper – 02 nos., 02 shifts each. 3. Engine Piston Ring Parts. a. Engine Piston Ring – 01 Set. b. Engine Head Gasket Kit – 01 Set. c. Main Bearing Oil Seal – 01 Pc. d. Timing Oil Seal – 01 Pc. e. Chamber Pkg – 01 Pc. f. Piston Pin Lock – 01 Set. g. Connecting Bush – 01 Set. h. Piston Pin – 01 Set. i. Engine Cylinder Liner – Full Set. B) 1. Complete Silencer Opening , fitting dimes portion repairing welding. a. Fitter – 01 no. ,01 shift. b. Helper – 01 no. ,01 shift. 2. Silencer Spares Parts. a. Welding Rod – 01 Kg. b. Carbet – 01 Kg. c. Silencer Tail Pipe – 01 Set. d. Silencer Clamp & Bolt – 02 Pcs. C) 1.Front & Rear Both Side Spring Recambering Pin Bush Fitting. a. Fitter – 02 nos., 02 shifts each. b. Helper – 02 nos., 02 shifts each. 2. Front & Rear Both Side Spring Leaf Welding, Cutting, hanger drilling etc. a. Machinist – 02 nos., 02 shifts each. b. Fitter – 02 nos., 02 shifts each. c. Helper – 02 nos., 02 shifts each. 3. Spring Spares Parts. 1. Spring Hanger –04 Pcs. 2. Spring Pin – 12 Pcs. 3. Spring Bush – 12 Pcs. 4. Hanger Bolt – 15 Pcs. 5. Centre Bolt – 04 Pcs. 6. Spring (U) Bolt –02 Pcs. 7. Spring Clamp 8” – 06 Pcs. 8. Quarter Pin – 10 Pcs. 9. Spring (U) Bolt Washer – 16 Pcs. 10. Grease – 02 Kg. 11. Spring Jhulla Assy – 04 Pcs. D) 1. Main Chassis Dimes Portion Repairing, arc Welding & doubling M/S sheet plate fitting. a. Welder – 02 nos., 03 shifts each. b. Fitter – 02 nos., 03 shifts each. c. Helper – 02 nos., 03 shifts each 2. Main Chassis Spares Parts. 1. Welding Rod – 03 Kg. 2. Cutting Electrode – 05 Kg. E) 1. Chassis Cross Member Repairing, Aligning, welding and fitting. a. Welder – 02 nos., 02 shifts each. b. Fitter – 02 nos., 02 shifts each. c. Helper – 02 nos., 02 shifts each. 2. Chassis Cross Member Spares Parts. a. Crossmember Bracket – 06 Pcs. b. Crossmember Bracket Bolt & Washer – 36 Pcs.

Total impact of GST for the purpose of CTC

SONU MOTORS (BID ID -1144109)

S K AUTOMOBILE (BID ID -1144115)