REPAIR RESURFACING TO INTERNAL ROADS INCLUDING SIDE BERM KERB STONES ROAD FURNITURE ETC IN ZONE A AND B AREA OF AGE B R NAVY UNDER GE I NAVY JAMNAGAR

Amount

M&L moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified. (Measurements shall be taken after compaction).

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally clean the surface with air compressor to remove loose dirts etc. all as specified.

M&L applying evenly a priming/ tack coat with bituminous primer using paving bitumen @ 5 Kg per 10 Sq.m using paving bitumen VG-30.

M&L for premix bituminous, macadam using paving bitumen VG-30 any penetration content @ 4% by weight of total mix laid using mechanical paver, rolled and compacted to required gradient and camber with 8-12 tonne power vibrator roller and rolled to a uniform smooth surface (any consolidated thickness) complete all as specified and directed. Note: For design purpose minimum binder content shall be as described i.e. 4% for VG-30 grade bitumen and it shall not be less than the binder content as described under any circumstances. During design stage if binder content exceeds 4% in that case no extra payment shall be entertained to contractor for excess use of binder.

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area not exc 400 sqm and not exc 50 mm deep for repairing road cuts & broken edges of road complete all as specified & directed

ML for 7.5 cm thick (compact thickness) WBM with granite, basalt coarse aggregates of grading 3 ( 63 to 40mm size) spread, rolled and consolidated to required gradient materials and camber required for reparing roads cuts and broken edges of roads complete all as specified and as directed

M&L preparation of unsurfaced WBM surfaces by brooming with wire brushes for removing any caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or by air compressor to remove all loose dust/ dirt and applying evenly a tack coat with paving bitumen of grade VG-10 @ 10kg per 10Sqm complete all as specified & directed

M&L bituminous premixed semi-dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content using paving bitumen of grade VG 30 penetration by weight of total mix laid using mechanical paver, rolled and compacted by using power vibrator roller 8 to 12 tonne capacity to required camber and gradient complete all as specified.

M & L for repair to pot holes of any depth, not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 30mm in depth(depth of potholes exc 30mm ) , making good by applying tack coat using paving bitumen VG-30 @ 5 Kg per 10 Sqm putting in premix bituminous macadam carpet well rammed and sealed with binder 9.8Kg per 10 Sqm , binded with 0.09 cum of stone chippings , 6.3 mm size & , again well rammed complete all as directed.

M&L 2.00 mm thick and 100 mm width road markings like centre lines, stop lines, dashes, arrows, brackets and similar works on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temperature 160 Degree celsius with a special applicator machine complete all as per manufacturer's instructions and traffic diversion arrangement. Make: CMS, Mumbai / Shivalik Prime, Chandigarh / Ritacto, Meerut / SN Industries, Delhi

S&F road safety convex mirror (CM 40) material ABS body lens unbreakable polycarbonate with hood (size 40 inch/ 100 cm/ 1000 mm) and weight 13 kg per piece alongwith 75 mm outer dia MS pole length 6 feet high prepainted of white colour stand for 40 inch convex mirror (As per Technical specification of NHAI clause). Make: OEM road safety product from vision security solution / 3M / Mr Illumination (Note: Quoted rate is deemed to be inclusive of complete excavation / disposal including providing PCC (1:2:4) block of size 45cm x 45cm x 45cm for fixing in ground).

S&F Solar delenator (1000X47mm) made of polycarbonate and toughened aluminium alloy body height 145 mm dia and 80 mm, delinator height 80 mm comprises of 4 super bright LEDs which give 360 degree viewing Solar panel -2.5 V, 120 mm (approx) 1.25 V rechargeable battery - 1No. Delinator also have high intensity retro reflective brand of 1" width for extra visibility complete all as directed. Make: OEM road safety product from vision security solution / 3M / Mr Illumination / H2 Safety India Private Limited (Note: Quoted rate is deemed to be inclusive of complete excavation / disposal including providing PCC (1:2:4) block of size 30cm x 30cm x 30cm for fixing in ground).

S&F 110 mm square or circular shaped high capacity LED solar power reflective road stud all as specified. Make : 3M / Mr Illumination

S&F 100x100 mm uni-directional reflective pavement marker (RPM) or road studs bonded to or anchored within the road surface for lane marking and delineation for night time visibility, with metallic and plastic body of RPM/ road studs moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High Impact Polystyrene). The marker shall support a lead 13635 kg, tested in accordance with ASTM D 4280. Reflective panel shall consist of number of lenses containing single or duel prismatic cube capable of providing total internal reflection of the light entering confirming to ASTM D 788 or equivalent etc. complete. (As per Technical specification of NHAI clause A-8). Make: 3M / Mr Illumination

Raj brothers

SIBS CONTRACTOR

Honest builders

Jyoti Refrigeration

M/s Jagdish Machinery Stores