Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹15.8 Cr
EMD Value
₹25.8 L
Closing Date
1 Apr 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Construction of New Intra City Bus Terminus along with Commercial Space Development at Puducherry including Civil Electrical Plumbing Fire Fighting HVAC Works PA System CCTV surveillance IT enabled services Rainwater Harvesting Horticulture and Landscaping Provision of solar systems Other External Development work STP Septic Tank and other allied services etc and Incorporation of smart city features
NBCC/SBG/South/SmartCity/Pudchry/Works/2023/29dated18/03/2022~EW1caaf6071464c8d162f831a8
NBCC/SBG/South/SmartCity/Pudchry/Works/2023/29dated18/03/2022
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹11,800
₹25.8 L
1 Apr 2023
18 Mar 2023
1 Apr 2023
18 Mar 2023
1 Apr 2023
ABSTRACT OF COST
Estimate Cost Including
SI No. Description
1 Civil Works 13,88,85,795.00
2 Water Supply Plumbing & Sanitary Works 17,55,492.40
3 Fire Fighting System 62,99,080.40
5 Electrical Works 1,03,95,808.00
Total Amount including GST 15,77,22,035.80
Total Amount including GST 15,77,22,035.80
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan), including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50 m for all
As per Item 1 with Extra for every additional lift of 1.5 m or part thereof in
excavation / banking excavated or stacked materials. All Kinds Of Soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides
of foundations etc. in layers not exceeding 20cm in depth, consolidating
Each deposited layer by ramming and watering, lead up to 50 m and lift upto
Clearing jungle including uprooting of rank vegetation, grass, brush wood,
trees andsaplings of girth upto 30cm measured at a height of 1m above
ground level and removal of rubbish upto a distance of 50 m outside the
periphery of the area cleared.
Supplying chemical emulsion in sealed containers including delivery as
specified . Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-
termite treatment (excluding the cost of chemical emulsion) - tratment of
soil under existing flooors using chemical emulsion @ one litre per hole,
300mm apart including drilling 12mm diametre holes and plugging with
cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor -
with Chlorpyriphos / lindane E.C. 20% with 1% concentration
Supplying , filling , spreading & leveling Brick aggregate (single size):40mm
7 145(0287) nominal size ,inrecharge pit, in the required thickness, for all leads & lifts , Cum 12.00 449.58 5,395.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
1 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying , filling , spreading & leveling Stone aggregate (single size):20mm
8 152(0295) nominal size ,inrecharge pit, in the required thickness, for all leads & lifts , Cum 1.00 1,056.10 1,057.00
Supplying and filling with gravel (excluding rock) in trenches, plinth, sides
of foundations etc. In layers not exceeding 20 cm in depth consolidating
each deposited layers by ramming and watering etc. complete including all
Supplying and filling with gravel (excluding rock) in layers not exceeding
20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne
10 2.27C.1 roller , or wooden or steel rammers and rolling every 3rd and top-most Cum 13,746.00 753.89 1,03,62,975.00
layer with power roller of minimum 8 tonnes capacity including all leads
and lift (Payment will be made based on level measurement)
Boring , providing and installation bored cast-in-situ reinforced cement
concrete piles of grade M-25 of specified diameter and length below pile
cap,to carry a safe working load not less than specified , excluding the cost
of steel reinforcement but including the cost of boring with bentonite
solution and temporary casing of appropriate length for setting out and
11 20.2A.1A removal of same and the of the pile to be embedded in the pile cap etc. by Rmt 2,739.00 4,104.26 1,12,41,580.00
Crawler mounted , telescopic boom hydraulic pilling Rig all complete,
including removal of excavated earth with all its lifts and leads (length of
pile for payment shall be measured up to bottom of pile cap). - 600 mm dia
piles Note: Truck Mounted rotary / TMR / Tube well boaring machine shall
Vertical load testing of piles in accordance with IS 2911 (Part IV) including
installation of loading platform and preparation of pile head or construction
12 20.6.2.1 of test cap and dismantling of test cap after test etc. complete as per Per Test 3.00 37,098.59 1,11,296.00
specification - Single pile above 50 tonne and upto 100 tonne capacity -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
2 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Vertical load testing of piles in accordance with IS 2911 (Part IV) including
installation of loading platform and preparation of pile head or construction
13 20.6.2.2 of test cap and dismantling of test cap after test etc. complete as per Per Test 5.00 26,712.37 1,33,562.00
specification - Single pile above 50 tonne and upto 100 tonne capacity -
Supplying and filling in plinth with M-sand under floors, including watering,
ramming, consolidating and dressing complete.
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4
graded stone aggregate 20 mm nominal size derived from natural sources
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - for road works : 1:4:8 (1
Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal
Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness
using 0.68cum of sand & 0.62cum of gravel for 1cum finished to a soaked
CBR value of minimum 20 including cost and conveyance of sand and gravel
to the work site and stacking to the standard departmental gauge for
18 4.2D.MO premeaurement, mixing the required quantities of sand and gravel, Cum 1,731.00 2,133.09 36,92,372.00
spreading watering and consolidation the mix by power roller rolling to
achive the required proctor density including the labour charges for mixing,
spreading, hire and fuel charges for power roller and all other tools and
plants employed etc., complete. As per clause no 401 of MOT specification
Centering and shuttering including strutting , propping etc and removal of
form for - foundations, footings, bases of columns etc for mass concrete
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
3 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Centering and shuttering including strutting , propping etc and removal of
form for -Lintels, beams, plinth beams, girders, bressumers and catilevers
Centering and shuttering including strutting, propping etc and removal of
form for - Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc and removal of
form for - Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting , propping etc and removal of
form for - Stairs , (excluding landings) except spiral -staircases
Centering and shuttering including strutting , propping etc and removal of
24 5.9.2 form for - Walls (any thickness ) including attached pilasters , butteresses , Sqm 1,513.00 553.62 8,37,628.00
plinth and string courses etc.
Extra for additional height in centering , shuttering where ever required
width adequate bracing, propping etc. including cost of de-shuttering and
25 5.11.1 decentering at all levels, over a height of 3.5m, for every additional height of Sqm 2,045.00 233.63 4,77,770.00
1metre or part thereof (plan area to be measured) - Suspended floors,
roofs, landing, beams and balconies (Plan area to be measured)
Providing , hoisting and fixing upto floor five level precast reinforced
cement concrete in lintels, beams, and bressumers including setting in
26 5.15 cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centering cum 53.00 9,740.61 5,16,253.00
and shuttering but excluding the cost of reinforcement with 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - all work upto plith level -
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
4 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement concrete
work , using cement content as per approved design mix , including
pumping of concrete to site of laying but excluding the cost of centering ,
shuttering , finishing and reinforcement , including admixtures in
recommended proportions as per IS : 9103 to accelerate, retard setting of
concrete , improve workability without impairing strength and durability .
Note:- Cement content considered in this item is @ 330 kg / cum. Excess or
less cement used as per design mix is payable or recoverable separately. -
All work upto plinth level
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement concrete
work , using cement content as per approved design mix , including
pumping of concrete to site of laying but excluding the cost of centering ,
shuttering , finishing and reinforcement , including admixtures in
recommended proportions as per IS : 9103 to accelerate, retard setting of
concrete , improve workability without impairing strength and durability .
Note:- Cement content considered in this item is @ 330 kg / cum. Excess or
less cement used as per design mix is payable or recoverable separately. -
All work above plinth level upto floor V level
Extra for providing richer mixes at all floor levels - Note:- Excess / less
cement over the specified cement content used is payable / recoverable
separately - Providing M-30 grade concrete instead of M-25 grade BMC /
RMC . (Note:- cement content considered in M-30 is @ 340 kg / cum)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
5 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and applying integral crystalline slurry of hydrophilic in nature
for waterproofing treatment to the RCC structures like retaining walls of the
basement, water tanks , roof slabs, podiums , reservior , sewage & water
treatment plant , tunnels / subway and bridge deck etc., prepared by mixing
in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for
vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water)
for horizontal surfaces and applying the same from negative (internal) side
31 22.23.1 with the help of synthetic fiber brush. The material shall meet the Sqm 118.00 535.09 63,142.00
requirements as specified in ACI-212-3R-2010 i.e by reducing permeability
of concrete by more than 90% compared with control concrete as per DIN
1048 and resistant to 16 bar hydrostatic pressure on negative side. The
crystalline slurry shall be capable of self-healing of cracks up to a width of
0.50 mm. The work shall be carried out all complete as per specification .
The product performance shall carry guarantee for 10 years against any
leakage - For Vertical surfcae two coats @ 0.70 kg per sqm
Providing and laying pitching on slopes laid over prepared filter media
including boulder apron laid dry in front of toe of embankment complete
as per drawing and technical specifications - Cement concrete blocks of size
0.3 x 0.3 x 0.3 m cast in cement concrete of grade M15 (add 2 percent of
cost to account for excavation for preparation of bed,nominal surface
reinforcement and filling of granular material in recesses between blocks)
Providing and laying 60mm thick factory made cement concrete
interlocking paver block of M-30 grade made by block making machine with
33 16.68 strong vibratory compaction and of approved size and design / shape laid in Sqm 1,745.00 724.10 12,63,547.00
required colour and pattern over and including 50mm thick compacted bed
of course sand , filling the joints with coarse sand etc. all complte
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
6 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Steel reinforcement for R.C.C.work including straightening , cutting ,
bending , placing in position and binding all complete upto plinth level -
Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW)
Fe - 415 or more
Steel reinforcement for R.C.C.work including straightening , cutting ,
bending , placing in position and binding all complete above plinth level -
Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW)
Fe - 415 or more
Providing anticorrosive treatment to HYSD reinforcement with fusion
bonded epoxy coating the rate includes cost of anticorrosive coating
including cost of powder , sand blasting, cleaning , induction , heating ,
36 5.22.8 depreciation of machinery etc, wastage in cut length of bars , provision of Tonne 236.00 15,397.14 36,33,725.00
wooden battens between rows of coated bars , cover to work bush pins / bar
bending machines etc - for bars of 20mm to 32 mm diametre - conforming to
Providing anticorrosive treatment to HYSD reinforcement with fusion
bonded epoxy coating the rate includes cost of anticorrosive coating
including cost of powder , sand blasting, cleaning , induction , heating ,
37 5.22.9 depreciation of machinery etc, wastage in cut length of bars , provision of Tonne 130.00 20,447.41 26,58,163.00
wooden battens between rows of coated bars , cover to work bush pins / bar
bending machines etc - for bars of 8mm to 16 mm diametre - conforming to
Providing and fixing in position 12mm thick bitumen impregnated fiber
38 5.28 board conforming to IS: 1838, including cost of primer, sealing compound Sqm 459.00 530.45 2,43,475.00
Grade-A in expansion joints.
Brick work with common burnt clay F.P.S (non modular ) bricks of class
39 6.1.1 designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : Cum 96.00 7,679.46 7,37,229.00
Brick work 7 cm thick common burnt clay F.P.S. (non modular) brick of
40 6.8 class designation 3.5 in cement mortar 1:3 (1cement : 3 coarse sand ) in Sqm 36.00 785.15 28,266.00
superstructure above plinth level and upto floor five level Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
7 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying damp-proof course 50mm thick with cement concrete
41 4.11 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal Sqm 251.00 385.57 96,777.00
Supplying and fixing C.I. cover without frame for manholes :455x610 mm
42 19.18.1 rectangular C.I. cover (light duty) the weight of the cover to be not less than No 17.00 1,071.43 18,215.00
Providing and fixing ISI marked flush door shutters conforming to IS :
2202 (Part I) decorative type, core of block board construction with frame
43 9.20.1 of 1st class hard wood and well matched teak 3 ply veneering with vertical Sqm 3.00 2,683.56 8,051.00
grains or cross bands and face veneers on both faces of shutters 35 mm
thick including ISI marked Stainless Steel butt hinges with necessary screws
Supplying and applying bituminous solution primer on roof and / or wall
surface at 0.24 litre per sqm.
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300mm thick AAC blocks in super structure above plinth
45 6.47 level up to floor V level with RCC band at sill level and lintel level with Cum 544.00 8,208.01 44,65,158.00
approved block laying polymer modified adhesive mortar all complete .(The
payment of RCC band and reinforcement shall be made for seperately).
Provding and laying autoclaved aerated cement blocks masonry with
100mm thick AAC blocks in superstructure above plinth level upto floor five
46 6.38 level in cement mortar 1:4 (1 cement : 4 coarse sand) . The rate includes Sqm 22.00 9,231.27 2,03,088.00
providing and placing in position 2 nos 6 mm dia M.S.bars at every third
course of masonry work.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
8 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Fencing with angle iron post placed at required distance embedded in
cement concrete blocks, every 15th post, last but one end post and corner
post shall be strutted on both sides and end post on one side only and
provided with horizontal lines and two diagonals interwoven with
47 16.18.1 horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), Rm 2,916.00 16.31 47,553.00
between the two posts fitted and fixed with G.I. staples, turn buckles etc.
complete. (Cost of posts, struts, earth work and concrete work to be paid for
separately). Payment to be made per metre cost of total length of barbed
wire used With G.I. barbed wire
Supplying at site Angle iron post & strut of required size including bottom to
48 16.19 be split and bent at right angle in opposite direction for 10 cm length and kg 1,906.00 87.56 1,66,882.00
drilling holes upto 10 mm dia. etc. complete.
Providing and fixing M.S. grills of required pattern in frames of windows
49 9.48.1 etc. with M.S. flats, square or round bars etc. including priming coat with kg 200.00 153.72 30,744.00
approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing double glazed hermetically sealed glazing in aluminium
windows, ventilators and partition etc. with 6 mm thick clear float glass
both side, having 12 mm air gap, including providing EPDM gasket,
perforated aluminium spacers, desiccants, sealant (Both primary and
secondary sealant) etc. as per specifications, drawings and direction of
Engineer-in-charge complete.
51 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand) sqm 3,998.00 180.67 7,22,318.00
12mm cement plaster finished with a floating coat of neat cement of mix -
1:3 (1 cement :3 fine sand)
53 13.8.3 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 6,283.00 218.45 13,72,543.00
15 mm cement plaster on rough side of single or halfbrick wall finished
with a floating coat of neat cement of mix - 1:4 (1 cement : 4 fine sand)
15mm cement plaster on the rough side of single or half brick wall of mix -
1:4 (1cement : 4 fine sand)
56 13.37.1 White washing with lime to give an even shade for New work Sqm 2,270.00 21.54 48,885.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
9 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface : Water thinnable cement primer
Wall painting with plastic emulsion paint Royal of approved brand and
manufacture to give an even shade - two or more coats on new work
Finishing walls with textured exterior paint of required shade - New work
60 13.45.1 (Two or more coats applied @ 3.28 ltr / 10 sqm ) over and including Sqm 6,283.00 190.83 11,98,983.00
priming coat of exterior primer applied @ 2.20 kg / 10 sqm
Providing wood work in frames of doors , windows, clerestory windows and
other frames , wrought framed and fixed in position with hold fast lugs or
with dash fasteners of required dia & length (hold fast lugs or dash fastener
shall be paid for separately) -vengai wood
Providing and fixing panelled or panelled and glazed shutters for doors,
windows, and clerestory windows, including ISI marked M.S.pressed butt
62 9.5.2.1V hinges bright finished of required size with necessary screws, excluding Sqm 68.00 5,235.68 3,56,027.00
panelling which will be paid for separately , all complete - Kiln seasoned and
chemically treated Vengai wood - 35 mm thick shutters
Providing and fixing bright finished brass butt hinges with necessary screws
etc complete - 125 X 85 X 5.5 mm (heavy type)
Providing and fixing bright finished brass butt hinges with necessary
screws etc complete - 100 X 85 X 5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc complete - 200 x 10 mm
Providing and fixing bright finished brass door latch with necessary screws
etc complete - 300 x 16 x 5 mm
Providing and fixing bright finished brass 100 mm mortice latch and lock
67 9.76 with 6 levers and a pair of lever handles of approved quality with necessary Each 23.00 1,305.53 30,028.00
screws etc. complete.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
10 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing aluminium extruded section body tubular type
universal hydraulic door closer (having brand logo with ISi, IS : 3564,
69 9.84 embossed on the body, door weight upto 36 kg to 80 kg and door width Each 23.00 1,094.52 25,174.00
from 701 mm to 1000 mm), with double speed adjustment with necessary
accessories and screws etc. complete.
Providing and fixing bright finished brass handles with screws etc complete -
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
11 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing factory made uPVC white colour casement /casement
cum fixed glazed windows comprising of uPVC multi-chambered frame ,
sash and mullion (where ever required) extruded profiles duly reinforced
with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll
forming process of required length (shape & size according to uPVC profile),
uPVC extruded glazing beads of appropriate dimension , EPDM gasket ,
stainless steel (SS 304 grade) friction hinges , zinc alloy (white powder
coated) casement handles, G.I fasteners 100 x8 mm size for fixing frame to
finished wall , plastic packers , plastic caps and necessary stainless steel
screws etc. Profile of frame & sash shall be mitred cut and fusion welded at
71 9.147A.6 all corners, mullion (if required) shall be also fusion welded including Sqm 8.00 7,677.09 61,417.00
drilling of holes for fixing hardware's and drainage of water etc. After fixing
frame the gap between frame and adjacent finished wall shall be filled with
weather proof silicon sealent over backer rod of required size and of
approved quality , all complete as per approved drawing.(Single / double
glass panes and silicon sealent shall be paid separately) - Casement cum
fixed panel window having both end single casement panel , middle fixed
panels and at top completely fixed ventilator with S.S friction hinges (350 x
19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm , &
mullion 67 x 80 mm all having wall thickness of 2.3 + or -0.2mm and single
glazing bead / double glazing bead of appropriate dimension.
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with
awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,
mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15
mm M.S. square tube, the vertical door frame profiles to be reinforced with
19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal
to be provided through out the frame. The door frame to be fixed to the wall
using M.S. screws of 65/100 mm size, complete as per manufacturer’s
specification. Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
12 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing factory made panel PVC door shutter consisting of
frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19
mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a
coat of steel primers of approved make and manufacture. M.S. frame
covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm
thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be
tapered in 45 degree angle on both side forming styles and 5 mm thick, 95
mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be
tapered in 45 degree on the inner side to form top and bottom rail and 115
73 9.120.1 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be Sqm 40.00 2,943.33 1,17,734.00
tapered on both sides to form lock rail. Top, bottom and lock rails shall be
provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross
PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5
mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed
to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet
beadingon inner side, and joined together with solvent cement adhesive. An
additional 5 mm thick PVC strip of 20 mm width is to be stuck on the
interior side of the 'C' Channel using PVC solvent adhesive etc. complete as
manufacturer's specification & drawing. 30 mm thick plain PVC door
Supplying and fixing rolling shutters of approved make, made of required
size M.S.laths, interlocked together through their entire length and jointed
together at the end by end locks , mounted on specially designed pipe shaft
with brackets, side guides and arrangements for inside and outside locking
74 10.6.2 with push and pull operation complete, including the cost of providing and Sqm 116.00 3,253.54 3,77,412.00
fixing necessary 27.5 cm long wire springs manufactured from high tensile
steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top
cover of required thickness for rolling shutters - 80 x 1.20mm M.S.laths with
1.25 mm thick top cover
75 10.7 Providing and fixing ball bearing for rolling shutters. each 32.00 397.54 12,722.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
13 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and laying ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer), of commercial quality
conforming to IS : 15622, of approved make in colours such as white, Ivory,
Grey, Fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand), including pointing the joints with white cement and matching
pigment etc., complete
Providing and laying water proofing treatment in sunken portion of WCs,
bathroom etc., by applying cement slurry mixed with water proofing cement
compound consisting of applying : (a) First layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/
sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of
slurry of cement @ 0.242 kg/sqm mixed with water proofing cement
compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.The rate includes
preparation of surface, treatment and sealing of all joints, corners, junctions
of pipes and masonry with polymer mixed slurry.
Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS: 15622 of approved make , in all colours and shades,
laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) ,
including grouting the joints with white cement and matching pigments etc.,
complete - size of tile600x600mm
Providing and laying flamed finish granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18mm thick stone slab over
20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid and jointed with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing, curing and
polishing etc. all complete as specified and as - flamed finish granite stone
slab Jet black , Cherry red, Elite brown, Cat eye or equivalent
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
14 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
80 11.24 Extra for pre finished nosing to treads of steps of granite slabs. RM 144.00 452.42 65,150.00
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :
15622 (thickness to be specified by the manufacturer) , of approved make
(Jhonson / Asian / Somany / Nitco) in all colours , shades of size 300 x 450
81 11.36B mm as approved in skirting , risers of steps and dados, over 12mm thick bed Sqm 318.00 1,072.94 3,41,195.00
of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey
cement slurry @ 3.3 kg per sqm, including pointing in white cement with
pigment of matching shade complete - size 300x450 mm
Painting wood work with Deluxe Multi Surface Paint of required shade.
82 13.48.2 Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer Sqm 74.00 115.25 8,529.00
applied @0.75 ltr/10 sqm of approved brand and manufacture
Painting Steel work with Deluxe Multi Surface Paint to give an even shade.
83 13.48.3 Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer Sqm 515.00 115.05 59,251.00
applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.
Providing and fixing M.S. grills of required pattern in frames of windows
84 9.48.1 etc. with M.S. flats, square or round bars etc. including priming coat with Kg 200.00 153.72 30,744.00
approved steel primer all complete. Fixed to steel windows by welding .
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing with
85 10.28 necessary accessories & stainless steel dash fasteners , stainless steel bolts KG 58.00 556.23 32,262.00
etc., of required size, on the top of the floor or the side of waist slab with
suitable arrangement as per approval of Engineer-in-charge, (for payment
purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.).
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
15 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing
upto any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts &
nuts 8mm dia G.I.plain / bitumen washers complete but excluding the cost
of purlins , rafters ,trusses etc. The sheets shall be manufactured out of 2400
TEX panel rovigs incorporting minimum 0.3% ultra -voilet stabiliser in resin
system under approximately 2400 psi and hot cured. They shall be of
uniform pigmentation and thickness without air pockets and shall conform
to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or
pigmented , textured or smooth as specified - 2mm thick corrugated (2.5" or
4.2 " or 6") or step-down (2" or 3" or 6") as specifed
Structural steel work riveted , bolted or welded in built up sections , trusses
87 10.2 and framed work , including cutting, hoisting , fixing in position and KG 30,416.00 94.26 28,66,964.00
applying a priming coat of approved steel primer all complete
Providing and laying soft Korean grass turfing including supplying red
earth,manure, river sand, labour charges for ground preparation spreading
earth and manure transportation of all and maintaining the lawn for initial
three months etc. complete.
Sub Total For Civil Works = 13,88,85,795.00
WATER SUPPLY AND SANITARY ARRANGEMENTS
Boring / drilling bore well of required dia for casing / strainer pipe, by
suitable method prescribed in IS : 2800 (part 1) , including collecting
samples from different strata , preparing and submitting strata chart /bore
log, including hire & running charges of all equipments, tools , plants &
machineries required for the job, all complete - upto 90 metre depth below
ground level - all types of soil - 300 mm dia
Supplying, assembling, lowering and fixing in vertical position in bore well,
unplasticized PVC medium well casing (CM) pipe of required dia ,
conforming to IS:12818, including required hire and labour charges, fittings
& accessories etc. all complete , for all depths - 150 mm nominal size dia
91 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes
Digitally signed by
DEEPAK KUMAR MEHRA
16 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying , filling , spreading & leveling stone boulders of size rage 5 cm to
92 24.5 20 cm,inrecharge pit, in the required thickness, for all leads & lifts , all Cum 19.00 821.95 15,618.00
Supplying, filling, spreading and levelling gravels of size range 5 mm to 10
93 24.6 mm , in the recharge pit, over the existing layer of boulders , in required Cum 19.00 780.42 14,828.00
thickness for all leads and lifts , all complete
Gravel packing in tubewell construction in accordance with IS :4097,
94 24.8 including providing gravel fine / medium / coarse, in required grading and Cum 8.00 811.56 6,493.00
sizes as per actual requirement , of all complete
Supplying of electrically operated wet type submersible motor and pumpset
AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM.The pump shall have brass
impeller, high grade steel shaft with sufficient stages having outlet size of
95 31.250.1A 2"/2.5"/3" dia. to suit the borewell (150 / 200mm dia.), complete.The No 4.00 53,013.51 2,12,055.00
rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The
pumpset shall be guaranteed for a period of one year from the date of
commissioning.(5 HP Submersible motor and pumpset).
Supplying of electrically operated, single no stage high speed, centrifugal
monoblock with volute type delivery pumpset
(Texmo/KSB/Taro/Kirloskar) make, AC 3 phase, 415V, 50 HZ, 2900 - 3000
RPM. The pump shell have C.I. impeller, high grade steel shaft having
96 31.251.1A (100mm x 100mm) suction and delivery respectively including stainer / No 2.00 40,833.37 81,667.00
foot valve to pump the water from UGR to OHT. The rate includes, all taxes,
freight, etc., FOR at site in UT of Puducherry. The pumpset shall be
guaranteed for a period of one year from the date of commissioning.(5 HP
Monoblock centrifugal motor and pumpset).
Supplying and fixing of fully automatic air break star-delta starter range
97 31.256.1A for 5A to 13A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with No 4.00 6,641.82 26,568.00
suitable M.S. angle frame etc., complete.- 5HP to 12.5 HP pumpsets
Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper
98 31.258.1A submersible flat flexible cable of Finolex make complete.-upto 10HP Rm 150.00 127.02 19,053.00
pumpset Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
17 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the site ,
lowering to the trenches, laying to proper grade and alignment, testing of
99 31.160.1G joints with required testing equipment,including cost of solvent Rm 200.00 265.38 53,076.40
cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers, reducer, endcaps etc.,complete all as per IS and CPWD
specification.- 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the site ,
lowering to the trenches, laying to proper grade and alignment, testing of
100 31.160.1E joints with required testing equipment,including cost of solvent Rmt 60.00 125.93 7,556.00
cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers, reducer, endcaps etc.,complete all as per IS and CPWD
specification. -50mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the site ,
lowering to the trenches, laying to proper grade and alignment, testing of
101 31.160.1G joints with required testing equipment,including cost of solvent Rmt 75.00 265.38 19,904.00
cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD
specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the site ,
lowering to the trenches, laying to proper grade and alignment, testing of
102 31.160.1K joints with required testing equipment,including cost of solvent Rmt 60.00 829.30 49,759.00
cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD
specification. - 160mm dia.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
18 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS
specification 4985 and ISI marked including transportation to the site ,
lowering to the trenches, laying to proper grade and alignment, testing of
joints with required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees, threaded
pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD
specification. - 200mm dia.
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes
including collars/spigot jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.
complete 450 mm dia RCC pipes
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring
conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single
socketed pipes. 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings /
accessories for unplasticised rigid PVC rain water pipes conforming to
IS:13592 Type A, including jointing with seal ring conforming to IS: 5382,
leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend
Providing and fixing on wall face unplasticised - PVC moulded fittings/
accessories for unplasticised Rigid PVC rain water pipes conforming to IS :
13592 Type A, including jointing with seal ring conforming to IS : 5382,
leaving 10 mm gap for thermal expansion. Shoe (Plain)-110 mm shoe
Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood
108 12.43.2 plugs, screwed with M.S. screws of required length, including cutting brick Each 208.00 298.20 62,026.00
work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and
making good the wall etc. complete- 100mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
19 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI: 12701 marked , with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank - Circular Tank
Providing and fixing gun metal gate valve with C.I.wheel of approved quality
(Screwed end) - 25mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved
quality (Screwed end) - 32mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved
quality (Screwed end) - 40mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved
quality (Screwed end) - 50mm nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c
making good the walls etc. concealed pipe, including painting with anti
corrosive bitumastic paint, cutting chases and making good the wall : 15
mm dia nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931 15 mm nominal bore
Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
116 17.7.1 fittings and brackets, cutting and making good the walls wherever Each 17.00 4,174.11 70,960.00
require:White Vitreous China Wash basin size 630x450 mm with a pair of
15 mm C.P. brass pillar taps
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes
respectively with automatic flushing cistern with standard flush pipe and
118 17.4.1 C.P. brass spreaders with brass unions and G.I clamps complete, including Each 13.00 4,480.96 58,253.00
painting of fittings and brackets, cutting and making good the walls and
floors wherever required :One urinal basin with 5 litre white P.V.C.
automatic flushing cistern Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
20 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush
119 17.3.1 bend, overflow arrangement with specials of standard make and mosquito Each 9.00 12,939.71 1,16,458.00
proof coupling of approved municipal design complete, including painting of
fittings and brackets, cutting and making good the walls and floors
wherever required :
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with
100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
120 17.1.1 conforming to IS : 7231, with all fittings and fixtures complete, including Each 12.00 4,652.46 55,830.00
cutting and making good the walls and floors wherever required:White
Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral
type foot rests
Providing and fixing CP Brass Single lever telephonic wall mixer of quality &
make as approved by Engineer in charge.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts,
122 18.74.2 collar and bush of approved quality and colour. 15 mm nominal bore with Each 17.00 81.90 1,393.00
Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS:8931 15mm nominal bore
Providing and fixing on wall / column face unplasticed - PVC soil and waste
pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal
ring conformation to IS : 5382 leaving 10mm gap for thermal expansion -
single socked pipes -110mm diametre
Providing and fixing on wall / column face unplasticed - PVC soil and waste
pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal
ring conformation to IS : 5382 leaving 10mm gap for thermal expansion -
single socked pipes -75mm diametre
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
21 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing on wall / column face each 119.65 unplasticisd - PVC
(19.33.2F+19.3 moulded fittings / accessories for unplasticisd - PVC soil and waste pipes
3.1D) Average conforming to IS :4985 - including jointing with seal ring conforming to IS :
5382 leaving 10mm gap for thermal expansion - Bend with door 75mm
Providing and fixing on wall / column face unplasticisd - PVC moulded
fittings / accessories for unplasticisd - PVC soil and waste pipes conforming
127 19.33.1A to IS :14735 -1999 including jointing with seal ring conforming to IS : 5382 Each 5.00 205.23 1,027.00
leaving 10mm gap for thermal expansion - Single tee with door -
Providing and fixing in position UPVC moulded plain coupler (Finolex /
128 31.166.1G jain)(0.6Mpa) conforming to IS 7834 part II and ISI marked,including labour Each 5.00 171.90 860.00
charges for jointing, jointing materials etc,complete -75mm dia
Providing and fixing on wall face / column each face unplasticised - PVC
mould fittings / accessories forunplasticisd - PVC soil and waste
129 19.33.1D pipesconforming to IS : 14735 - 1999 including jointing with seal ring Each 5.00 164.19 821.00
conforming to IS : 5382 leaving 10mm gap for thermal expansion - bend
with door 110 mm
Providing and fixing on wall face / column face unplasticised - PVC moulded
fittings / accessories for unplasticisd - PVC soil and waste pipes conforming
130 19.33.1A to IS : 14735 -1999 including jointing with seal ring conforming to IS : 5382 Each 5.00 313.66 1,569.00
leaving 10mm gap for thermal expansion - Single tee with door - 110
Providing and fixing in position UPVC moulded plain coupler (Finolex /
131 31.166.1I jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including Each 5.00 265.77 1,329.00
labour charges for jointing, jointing materials etc,complete - 110mm dia
Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
IS:15905 - iron trap with 100mm inlet and 100mm outlet
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
22 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg
and frame to be not less than 2.70 kg as per standard design: 100x100 mm
size P type With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
134 18.8.4 This includes jointing of pipes & fittings , with one step CPVC solvement Rmt 120.00 549.07 65,888.00
cement and the cost of cutting chases and making good the same including
testing of joints complete - Concealed work , including cutting chases and
making good the wall etc - 32 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
135 18.8.3 This includes jointing of pipes & fittings , with one step CPVC solvement Rmt 90.00 446.42 40,178.00
cement and the cost of cutting chases and making good the same including
testing of joints complete - Concealed work , including cutting chases and
making good the wall etc - 25 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings including fixing the pipe with clamps at 1.00m
spacing.This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete - internal work - exposed on wall -
40mm nominal outer dia pipes
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
23 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain &
brass threaded fittings including fixing the pipe with clamps at 1.00m
spacing.This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete - internal work - exposed on wall -
50mm nominal outer dia pipes
Providing and fixing 600x450 mm beveled edge mirror of superior glass
138 17.31 (of approved quality) complete with 6 mm thick hard board ground fixed to Each 9.00 1,529.65 13,767.00
wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT soap Dish Holder having length of 138mm,
139 18.65 breadth 102mm, height of 75mm with concealed fitting arrangements, Each 15.00 173.86 2,608.00
weighing not less than 106 gms.
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement of
141 17.73.2 approved quality and colour600 mm long towel rail with total length of 645 Each 9.00 721.71 6,496.00
mm, width 78 mm and effective height of 88 mm, weighing not less than 190
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931. 15 mm nominal bore
Sub Total For Water Supply and Plumbing works = 17,55,492.40
Fire Fighting System
Excavating trenches of required width for pipes and fittings etc. including
dressing of sides, ramming of bottom depth upto 1.5 Mtrs including getting
out the excavated soil and then returning the soil as required in layers not
exceeding 20 cms in depth including consolidating each deposited layer by
ramming, watering, etc. and disposing of surplus excavated soil as directed
within a lead of 150 mtrs (pipe not exceeding 300 mm). In ordinary soil.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
24 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing, Laying. Testing & Commissioning of RCC hume pipes of NP2 class
with suitable collars filling the recess at joints of pipes with hemp dipped in
144 hot bitumen or other suitable compound for chaulking of joint by jack,
setting up of loose space over the collar joints caulked with CM 1:2, finished
both ends to a slope of 1:1 including curing, testing of pipes, etc., complete.
Drilling with core cutting machine in RCC beams,slabs floors,etc., for laying
pipes and rendering thesame in RCC 1:2:4, finishing the same to the
satisfaction of the owner or his authorized representative etc., including
nominal reinforcement wherever required, complete. The quoted rate shall
alsoinclude for providing EPOXY based water proofingcompound for sealing
the joints around the pipes. RCC walls/ beams ( upto 400 mm thk)
a 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 2.00 1,676.84 3,354.00
Supplying and costruction of of P.C.C support blocks of 1 : 2 : 4 concrete mix
of sizes as given below for pipe supports at terrace level to run the terrace
fire hydrant pipes with necessary shuttering, plastering, pipe fixing anchors
etc., complete as per specifications.
FIRE HYDRANT SYSTEM
Supplying, installing, testing and commissioning of G.I Pipes, ERW
confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and
pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick)
147 with painting, suitable type of supports, anchor fasteners, bolts nuts (
Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees,
elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by
using suitable supports etc, complete.
PIPE TO EXTERNAL YARD HYDRANT
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
25 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, errect, jointing, testing and commissioning of heavy class G.I pipes
(as per IS-1239). The pipes being fixed on to the wall or suspended from the
ceiling / truss with angle iron supports complete with bends, tees, flanges
and with all other required accessories including painting of the pipeline
with two coats of approved enamel paint over a coat of anti corrosive
primer etc. complete. As per IS code standards. Rate quoted above shall
include providing M.S.supports in angle iron / plates pipes etc. at every 2.5
m c/c. Rate quoted shall include for supply and providing necessary,
welding cutting, 'U' clamps both nuts, washers etc.as per specification or
pipe supports for horizontal / vertical pipes running along wall / column,
slabs trenches etc to suit different dia pipes made of GI/MS rods, flats etc.
consists of strap, nuts washers, threaded rod etc., rate quoted shall also
include necessary aniti corrosive painting and 2 coat f approved enamel
Supplying, Installing, testing and commissioning CI butterfly valves as per
149 BS 5155 ( PN 10/16) slim seal standard lever operated type with required
flanges, nuts, bolts etc. complete. - PN-10
b 100 mm dia. (Shaft riser and Terrace) Each 6.00 2,593.52 15,562.00
Supply, fixing, testing and commissioning of Air release valves screwed
ends of approved brand of manufacture, with accressories,etc complete
Supplying, installing, testing and commissioning of heavy duty Gun Metal
gate valves screwed ends of approved brand of manufacture.PN-10
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
26 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, fixing, testing and commissioning of Non return valve falnged end of
approved brand of manufacture, with accressories,etc complete. PN:10
1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE outlet
hydrant valve with chain and cap of GM gunmetal.
2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs long with 63
mm gunmetal male and female instantaneous coupling.
63 mm Gunmetal branch pipe with hexagonal detachable 16 mm nozzle,
made instantaneous coupling etc. complete.
Hose reel drum with 19 mm dia bore reinforced rubber hose of length 40
Mtrs length fitted with 6.35 mm dia. nozzle. The hose reel drum shall be
recessed swinging type with reel drum hose provided with coupling as per
detailed specification.
Internal hose cabinet frame (1200 x 900 x150) fronted with hinged & lock
157 made out of 16 G M.S. sheet with powder coated paint of to suit internal fire Nos 7.00 9,149.35 64,046.00
duct opening to accommodate the following accessories as mention above :-
EXTERNAL FIRE HYDRANT SYSTEM ( GROUND LVL) :
Supply, fix, test 80 mm dia GI MSDF bend.80 mm dia GI MSDF stand pipe (1
158 Mtr below + 1 Mtr above).The pipe portion below ground shall be with anti Nos 9.00 3,428.21 30,854.00
corrosive treatment as per detail specifications
Supply, fix, test 1 No. 63 mm dia female instantaneous pattern oblique
hydrant valve with chain and cap of gun metal
Supply, fix, test 2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I (ISI mark)
160 15 Mtrs long with 63 mm gun metal make male and female instantaneous Nos 9.00 12,392.48 1,11,533.00
Supply, fix, test 63 mm gun metal branch pipe with gun metal hexagonal
detachable 16 mm nozzle, made instantaneous coupling etc. complete.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
27 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, fix, test M.S. Hose cabinet stand mouted type fabricated out of M.S.
sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding)
162 door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted Nos 9.00 8,014.06 72,127.00
rate shall be includes suitable stand for mounting, all fasteners etc, and
cabinet shall be powder coated of approved colour both inside and out side.
TERRACE FIRE HYDRANT SYSTEM:-
Supply and fix terrace level 1 no of monoblock pump of capacity 450 LPM 35
Mtrs head with suitable electrical driven motor, suction and delevery side
163 Butterfly valve, non return valve, pressure guage, switches,cables,wires and LS 1.00 67,135.79 67,136.00
necessary acessories etc. complete as per specification.The pump shall be
with IP 55 protection.
Supply, storing, erection, testing and commissioning of wall mounted
control panel with SFU's, DOL starter, indicating lamps, push buttons, ,
necessary connecting cables, etc as per detailed specification. The panel
shall have IP 55 protection and provision to BMS intigration. etc., complete.
FOUR WAY FIRE BRIGADE INLET:
a) 4 nos. 63 mm dia Gun metal instantaneous inlet arranged on a 150 mm
dia GI header with flanges. b) 1 No. 150 mm non-return valves.- (PN16) c)
1 no of 150 mm dia Butterfly valves ( PN16) Insitu moulded. d) 1 no of 100
mm dia Butterfly valves( PN16) Insitu moulded
Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED
OTHERWISE" of 1.5cm height letters in red with white back ground.The size
of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts.
from finished floor near Manual call points.
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair
enclosure on every floor, indicating the floor number in words, lettering size
shall be 7.5 cm with contrasting colour from back ground.Size shall be 15cm
x 60cm. Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
28 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing and fixing in position the signages " FIRE ORDER" it should
contain the following matter on 3mm thick "Opaque" PVC foam board of
computerised cut, PVC non-reflective self adhesive vinyle painted foam
board of 3' x 4'. alert the security at security room by actuating manual call
point located at strategic locations. evacuate the occupants by using fire
exits and emergency exits only and assemble at various assembly poits. if
possible try to extinguish the fire by using nearest / suitable portable
extinguisher or water from nearest wet riser. be calm and do not give any
room from panic, walk, do not run. if you encounter serious difficulty in
evacuation, flat and try to attract attention of rescue team.
Action by security/reception upon receipt of information through fire alarm
orfire detectors or by using public address system. alert the occupants by
using public address system. inform fire control through any one of the
following phone numbers: 101 / local nos. refer evacuation plan from
evacuating standard people. guide the fire force, on their arrival to the seat
of fire. in case of the casualties, call ambulance by dialling number1
FIRE EXTINGUISHER SYSTEM
Supply and install in position approved make ABC Stored pressure type Fire
Extinguisher of 2 kgs capacity, fitted with discharge control valve (sq.grip
type) CE marked and pressure gauge, filled with mono ammonium
phosphate powder as per EN 3 615 approval, with discharge hose and open
nozzle and supplied complete with initial charge as per IS: 15683 with ISI
mark and wall bracket. Fire Rating 3A, 21B
Supply and install in position approved make Water Stored pressure type
Fire Extinguisher of 9lit capacity, fitted with discharge control valve (
171 Sq.grip type ) CE marked and pressure gauge, with discharge hose and open Each 2.00 8,071.20 16,143.00
nozzle and supplied complete with initial charge as per IS: 15683 with ISI
mark and wall bracket. Fire Rating 2A
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
29 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply and install in position approved make Co2 type Fire Extinguisher of
2kgs capacity, made from brand new seamless drawn steel cylinder as per
IS: 7285 with ISI mark and Chief of controller of explosives approval, fitted
with wheel/sq.grip valve as per IS: 3224 with ISI mark, with discharge bend
and horn and supplied complete with initial charge as per IS: 15683 with ISI
mark and wall bracket. Fire Rating 8B or 13B
Providing ,fixing , testing and commissioning of Portable Carbon-di-oxide
Gas Type Fire Extinguisher 4.5 Kgs, squeeze Grip,Controllable discharge
mechanism with nozzle, bend, Hose and wall mounting bracket etc.The Can
173 is made of Seamless Clinger and External Coating done by Spray Each 4.00 9,135.68 36,543.00
Painting.The thickness shall not less than 4.5 mm made of Sheet metal.The
Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall
consider the suitable signages along with the extinguishers.
PUBLIC ADDRSSIBLE SYSTEM ( 2 way talk back system) )
Supplying, installing, testing and commissioning of zone selector P.A.
console and with CRCA sheet housing,with necessary input ,output devices
and control desk( rack) as required. Console shall have all call / call back
facility complete with battery back up and it should also work on AC single
phase power.The panel shall have intigration facilty with BMS and also voice
evacuation system with intigration facility with PA and FA Panel (12 Zone)
Supplying, installing, testing and commissioning solid state Amplifier out
175 put in rack, including neccessory control wires, jacks etc. complete. 100 W Nos 1.00 31,052.63 31,053.00
Supplying, installing, testing and commissioning 40 strand twin core
176 control cables of PVC insulated copper conductor, Confirming to IS 1554, as Rmt 150.00 114.27 17,142.00
per specification.
Supplying, installing, testing and commissioning approved make 25mm
177 P.V.C. conduits on ceiling / wall / floor etc. complete with accessories like, Rmt 30.00 64.59 1,938.00
Junction boxes, Collars, Bends etc.
CONVENTIONAL FIRE ALARM SYSTEM Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
30 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying, installing, testing and commissioning of CONVENTIONAL TYPE
Fire Alarm Control panel with battery back up for 8 hours normal operation
and 15 minutes alarm operation. The control panel, battery charger and
necessary accessories, etc, shall be UL listed.The panel shall be Below
178 mentioned capacity, The panel shall consisting with 80 character LCD LS 1.00 44,094.74 44,095.00
display and RS 485 for networking. with suitable Standard mounting Rack,
The panel shall have intigration facilty with BMS and also intigration facility
with PA Panel etc complete in all respects as per detailed specifications (16
Supplying, installing, testing and commissioning of convetional Manual pull
station having an integrally mounted MCP, HOOTER & P.A SPEAKER-6
Watts (Two way talk back). (3 in 1 type). Rate quoted shall include
providing, fixing as 3 in 1 approved make Box.
Supplying, installing, testing and commissioning of convetional type Hooter
with with necessary mount ing accessories etc.
Supply, testing and commissioning of 1100V Grade 2 core x 1.5 sqmm PVC
insulated FRLS armoured cable for connecting detectors / devices to panels
and main micro processor control panels located in the respective floors
181 including end termination with indentification tags at each end, etc., Rmt 600.00 136.63 81,979.00
complete.The quoted rates shall be inclusive of necessary juntion boxes
made of M.S 16 SWG with cutouts for incoming & outgoing cables in
respective floors.
b) Supplying, installing, testing and commissioning approved make 20 mm
182 dia. P.V.C. flexible conduits on ceiling / wall / floor etc. complete with Rmt 80.00 40.99 3,280.00
accessories like, Junction boxes, Collars, Bends etc.
FIRE PUMP ROOM EQUIPMENT
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
31 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, Erection, testing & commissioning of electrical motor driven
Hydrant Pump of horizontal centrifugal end suction backpull out type
with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 60
MWC with all necessary accessories like bronze impeller, stainless steel
shaft and mechanical seal along with anti-vibration mounting, coupling,
coupling guard and base plate for pump, fabricated mild steel
channel,foundation bolts, and pump should have the dry run sensor
provision, etc., as per local fire brigade requirement . The pump shall
capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The
pump shall be coupled to electrical motor of 65 HP with speed of 2900 RPM,
Electric supply 415V, 50 Hz and complete set shall be mounted on a
common base frame. The quoted rate shall includes providing & fixing of
coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under
Supply, Erection, testing & commissioning of Diesel Engine driven
common stand by pump, horizontal centrifugal end suction backpull
out type with gland packing and capable to deliver 2280LPM (137 m³/
Hr) at 60MWC with all necessary accessories like bronze impeller,
stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, gear box, base plate for pump, fabricated mild steel channel with
foundation bolts etc., It includes providing and fixing fuel oil tank (capacity
as per TAC requirements) with supports and necessary pipe works for
184 diesel engine, battery and battery charger to be connected to control panel No. 1.00 8,14,200.00 8,14,200.00
of diesel engine and exhaust silencer including necessary pipe work and
lagging, pump should have the dry run sensor provision, etc., and shall be
automatic in operation diesel engine control panel with 24V DC storage
battery & its battery charger with required Ampere - hour rating, terminal
box (2 nos. of 12volts), cooling water line for engine with required pipes /
valves / fittings etc., as per TAC including all associated electrical works.
The pump shall capable to have 3.5 kg/cm² residual pressure at top most
hydrant point. The pump shall coupled to Diesel engine, radiator water
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
32 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, erection, testing & commissioning of electrical motor driven
Jockey pump of horizontal centrifugal end suction back pull out type
with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 60
MWC with all necessary accessories like bronze impeller, stainless steel
shaft and mechanical seal along with anti-vibration mounting pad and
185 flexible connections at discharge end of the pipes, pump should have the dry No. 1.00 3,47,789.47 3,47,790.00
run sensor provision etc. and shall be automatic in operation.The pump
shall be coupled to motor of 15 HP with speed of 2900RPM and complete
set shall be mounted on common base frame. The quoted rate shall includes
providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC
foundation is under civil scope.foundation is under civil scope
Fabrication, Supplying, Installation, Testing & Commissioning of electrical
control panel, of cubical construction, floor mounted type, fabricated out of
2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust
and vermin proof, powder coated of approved shade after 7 tank treatment
process, cable alley, inter-connection, having switchgears and accessories
mounting and internal wiring, earth terminals, numbering etc. complete in
all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with
enclosure protection class IP 42 as required. (a) 400 Amps. 4 Pole MCCB, 36
KA Thermal Magnetic type with operating handle mechanism and
changeover interlocking etc. and necessary accessories
(b) Voltmeter (0-500 Volts) with selector switch.
(c) Ammeter (0- 500Amps.) with selector switch & CT's etc.
(d) Set of 3 Phase indicating lamp.
(e) Set of AJ.bus bar Amps.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
33 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
(a) Hydrant pump.
125 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating
handle mechanism and necessary accessories with 65 HP fully automatic
star/ delta starter with over load protection, current sensing type single
phase preventor complete with all accessories and internal wiring required
for automatic operation, selector switch for local/remote,
auto/manual/OFFoperation. (c) Jockey pump for Hydrant
32 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle
mechanism and necessary accessories with 15 HP fully automatic DOL
starter with over load protection, current sensing type single phase
187 preventor complete with all accessories and internal wiring required for Set 1.00 59,993.68 59,994.00
automatic operation, selector switch for local/remote,
auto/manual/OFFoperation. (d) Diesel Engine Control.
Control for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting device, timers and
relays as required, push buttons, start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and
Engine ON indication.
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector
switch, 0-30 V DC'<volt meter, 0-20A DC Ammeter.
(iv) AII standard relays and accessories for automatic operation of diesel
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC
outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade
power cables with glands etc. The cables shall be laid in tray / Hume pipe /
188 in trenches/on walls/ floor etc. as required. For cables laid out door the rate
shall include earth excavation providing brick and sand protection, refilling
and compacting the earth.The rate shall excludes tray & Hume pipes.The
minimum size of the cables shall as mentioned below,
2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor
b 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Mtr 10.00 342.82 3,429.00
c 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 10.00 614.84 6,149.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
34 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
d 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 20.00 300.59 6,012.00
e 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking. Mtr 10.00 799.92 8,000.00
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle
iron suspension supports, anchor fasteners etc. complete. Maximum height
of suspension shall not exceed 500 mm.Size of the tray shall be suitable for
laying the above mentioned cables.
Supply, fixing, testing and commissioning of electronic type level indicaor of
approved make with pressure transducer, alarm,sensors, LED display for
indicating high, half full and low level in sump (ground level reservoir) Rate
190 quoted shall include for supply and laying necessary armoured control Set 1.00 40,492.63 40,493.00
cablling inside pumphouse (approx. length 30 meters) for connecting
sensors to panels located inside pumphouse, wiring from the control panel
to sensor probes, ON / OFF indicators etc. complete in all respects.
SLUICE VALVES : Tank outlet
Supply, install, testing & commissioning of CI sluice valves of approved
191 make as per IS 780 Class I with necessary flanged tail piece, compansion
flanges, bolts, nuts, gaskets, etc.,complete in all respects. PN 10 rating valve
Supply, Installation , Testing & Commissioning of MS Fabricated Pot/Basket
Strainer with accessories etc., complete.
Supply, Installation , Testing & Commissioning of NON RETURN VALVE with
accessories etc., complete.-PN16
Supplying, Installing, testing and commissioning CI Sluice valves as per BS
194 5155 ( PN 16) slim seal standard lever operated type with required flanges,
nuts, bolts etc. complete.
Supplying, Installing, testing and commissioning CI butterfly valves as per
195 BS 5155 ( PN 10) slim seal standard Gear operated type with required
flanges, nuts, bolts etc. complete. (For Delivery Header) Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
35 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying, Installing, testing and commissioning of Flow meter with
necessary accessories as per standard specifications etc complete.
Supplying, installing, testing and commissioning of Gun metal chrome
finished Ball valves with fittings of screwed end type.
a 25 mm nominal dia (for pressure switch manifold & air vessel tank) Nos 4.00 826.00 3,304.00
Supply and installation of differential Pressure switches of suitable range (0
198 to 12 bar) for pumpsets complete with necessay Ball valves, Fittings like Set 5.00 5,546.00 27,730.00
unions / colors / reducers etc.
Supply and installation of Pressure gauges of suitable range (0-16 bar), 110
199 mm diameter dial for pumpsets completes with necessary Ball valves, Set 4.00 3,127.00 12,508.00
siphon, Fittings like unions / colors / reducers etc.
Supply, fixing, testing and commissioning of air vessel tank shall be
fabricated out of of 250 mm dia MS pipe to 1000 mm long complete with
25mm inlet, 25mm drain, 25mm dia connection for air release valve
including legs, painting with red oxide primer and finished with fire red
enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto
pump header and other accessories etc.
Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with
mineral wool insulation with aluminum sheet. The quoted rate shall include
100 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and
mineral wool insulation with aluminum sheeting and Pipe supports also.
Sub Total For Fire Fighting System = 62,99,080.40
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
36 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply of Drinking water RO PlAnt of Make : Cri or Equivalent ; Flowrate :
1500 Lph Inlet / Outlet : 25mm ; Type : Monoblock 1hp PRESSURE SAND
FILTER: ; Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of
Construction : FRP Inlet / Outlet Connection : 25 mm ; Multi port Valve Size :
25 mm ; Media : Pebbles & Sylex and Sand. ACTIVATED CARBON FILTER:
Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of ;
Construction : FRP ; Inlet / Outlet Connection : 25 mm; Multi port Valve Size
: 25 mm ; Media : Cocount Shell Activated Carbon & ; Pebbles. MICRON
FILTER: Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ;
Inlet / Outlet Connection : ¾” mm ; Number of Cartridges : 2 Nos. of 20”
Long ; Number of Housing : 2 Nos. ; Working Pressure : 2 to 3 Kg / Sq. cm ;
Filter Elements : 5WoundPP. RO PLANT FRAME: Skid : Stainless Steel (SS
202 Grade) ; Thickness of square pipe : 1 inch ; Thickness of sheet : 1.2 mm ;
Method of cutting : Laser. ; Membrane: ; Material of Construction : Thin Film
Composite ; Make : ( FILMTEC/Brackish/Hydranatics ) ; No. of Membranes :
2 Nos. Dimension : 40” x 40”; Type of membrane : Sprial Wound. HIGH
PRESSURE PUMP: Material of Construction : SS 304 ; Make :CRI (2-16) ;
Sub Total For RO Plant = 3,85,860.00
ELECTRICAL WORKS
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including
accessories , and providing masonry enclosure with cover plate having
locking arrangement and watering pipe etc. with charcoal / coke and salt as
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including
accessories, and providing masonry enclosure with cover plate having
locking arrangement and watering pipe of 2.7 meter long etc.but without
charcoal / coke and salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for
205 5.7 conductor earth electode , including connection / termination with GI Rm 20.00 19.63 393.00
thimble etc. as require
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
37 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below
ground as strip earth electrode , including connection / terminating with nut
, bolt, spring , washer etc.as required. (Jointing shall be done by overlapping
and with 2 sets of brass nut bolt & spring washer spached at 50mm)
Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as
strip earth electrode , including connection / terminating with G.I. nut , bolt,
spring , washer etc.as required. (Jointing shall be done by overlapping and
with 2 sets of G.I.nut bolt & spring washer spached at 50mm)
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for
connections etc as required
Providing and fixing 25mm x 5mm GI.strip on surface or in recess for
connections etc . as required
Providing and fixing 4.00 mm dia copper wire on surface or in recess for
loop earthing as required.
Wiring or light point / fan point / exhaust fan point / call bell per point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface
211 1.10.3 / recessed medium class pvc conduit , with modular switch, modular plate, Point 324.00 590.15 1,91,207.00
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc.as required - GROUP C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed medium class PVC
212 1.11 conduit , 2 way modular switch , modular plate , suitable GI box and Point 10.00 635.69 6,357.00
earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable etc.as required
Wiring for group controlled (looped) light point / fan point / exhaust fan
point / call bell point (without indepdent switch etc.) with 1.5 sq.mm FRLS
213 1.55.3 PVC insulated copper conductor single core cable in surface / recessed PVC Point 15.00 337.79 5,067.00
conduit , and earthing the point 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc.as required - Group C
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
38 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply and fixing of meter board suitable for 32A three phase service
connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link
(1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with
214 supporting TW reepers of 1" thick an either side with painting with suitable Each 16.00 2,325.78 37,213.00
bolt and nuts for fixing the TW plank on wall with earth connection and
inter connection with 7/20 PVC insulated copper wire from EB meter to fuse
Supplying and fixing following modular switch / socket on the existing
215 1.24.1 modular plate & switch box including connections but excluding modular Each 46.00 47.78 2,198.00
plate etc. as required - 5/6 A switch
Supplying and fixing following modular switch / socket on the existing
216 1.24.3 modular plate & switch box including connections but excluding modular Each 38.00 85.11 3,235.00
plate etc. as required - 15/16 A switch
Supplying and fixing following modular switch / socket on the existing
217 1.24.4 modular plate & switch box including connections but excluding modular Each 46.00 69.65 3,204.00
plate etc. as required - 3 pin 5/6 A socket outlet
Supplying and fixing following modular switch / socket on the existing
218 1.24.5 modular plate & switch box including connections but excluding modular Each 38.00 121.01 4,599.00
plate etc. as required - 6 pin 15/16 A socket outlet
Supplying and fixing following modular switch / socket on the existing
219 1.24.6 modular plate & switch box including connections but excluding modular Each 15.00 73.92 1,109.00
plate etc. as required - Telephone socket outlet
Supplying and fixing following modular switch / socket on the existing
220 1.24.7 modular plate & switch box including connections but excluding modular Each 15.00 74.14 1,113.00
plate etc. as required - TV antenna socket outlet
Supplying and fixing following size / modules , GI box alongwith modular
221 1.27.1 base & cover plate for modular switches in recess etc. as required - 1 or 2 Each 10.00 140.39 1,404.00
module (75mm x 75mm)
Supplying and fixing following size / modules , GI box alongwith modular
222 1.27.2 base & cover plate for modular switches in recess etc. as required - 3 Each 10.00 154.07 1,541.00
module (100mm x 75mm)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
39 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying and fixing following size / modules , GI box alongwith modular
223 1.27.3 base & cover plate for modular switches in recess etc. as required - 4 Each 15.00 167.22 2,509.00
module (125 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular
224 1.27.4 base & cover plate for modular switches in recess etc. as required - 6 Each 15.00 205.20 3,078.00
module (200 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular
225 1.27.5 base & cover plate for modular switches in recess etc. as required - 8 Each 15.00 235.40 3,531.00
module (125 mm x 125 mm)
Supplying and fixing following size / modules , GI box alongwith modular
226 1.27.6 base & cover plate for modular switches in recess etc. as required - 12 Each 10.00 275.64 2,757.00
module (125 mm x 125 mm)
Supplying and fixing of following sizes of medium class PVC conduit along
227 1.21.1 with accessories in surface/recess including cutting the wall and making Meter 100.00 50.22 5,022.00
good the same in case of recessed conduit as required. 20mm
Supplying and fixing of following sizes of medium class PVC conduit along
228 1.21.2 with accessories in surface/recess including cutting the wall and making Meter 100.00 60.44 6,045.00
good the same in case of recessed conduit as required. 25mm
Supplying and fixing of following sizes of medium class PVC conduit along
229 1.21.3 with accessories in surface/recess including cutting the wall and making Meter 2,544.00 77.69 1,97,631.00
good the same in case of recessed conduit as required. 32mm
Supplying and fixing of following sizes of medium class PVC conduit along
230 1.21.4 with accessories in surface/recess including cutting the wall and making Meter 100.00 99.64 9,964.00
good the same in case of recessed conduit as required. 40mm
Supplying and fixing of following sizes of medium class PVC conduit along
231 1.21.5 with accessories in surface/recess including cutting the wall and making Meter 100.00 129.78 12,978.00
good the same in case of recessed conduit as required. 50mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
40 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5
sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5
sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq.
Wiring for circuit/ submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor, single core cable in surface/
recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq.
Wiring for circuit / submain wiring alongwith earth wire with the following
sizes of FRLS PVC insulated copper conductor , single core cable in surface /
recessed medium class PVC conduit as required - 4 X 4 sq.mm + 2 x 4
sq.mm earth wire
Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star
make - Havells/Almonard/Usha
Installation, testing and commissioning of ceiling fan, including wiring the
238 1.44 down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC Each 48.00 835.52 40,105.00
insulated, copper conductor, single core cable etc as required
Supply of 300mm 1400 rpm heavy duty exhaust fan
Make:Almonard/Orient/Usha
Installation of exhaust fan in the existing opening , including making good
240 1.50.1 the damage , connection , testing , commissioning etc. as required - Upto 450 Each 13.00 177.71 2,311.00
Supplying, Installation, testing and commissioning of 36/40Watt LED
Ceiling light including cost of material, labour etc., complete.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
41 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet
LED Tube Light including cost of material, labour etc., complete.
Supplying, Installation, testing and commissioning of 2 Tonne A.C 3 Star
Rating including cost of material, labour etc., complete.
Supplying, Installation, testing and commissioning of Geyser/Water Heater
244 1111 including cost of material, labour etc., complete.25 ltrs. Storage water heater- Each 2.00 7,000.00 14,000.00
ABS Make: Almonard/Venus/V-Guard
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2
(1 cement : 2 fine sand) including testing of joints etc. complete - 300 mm
Supplying and installing following size of perforated Hot dipped Galvanised
iron cable tray (galvanization thickness not less than 50 microns) with
246 4.6.6 perforation not more than 17.5% , in convenient sections , joined with Meter 200.00 778.93 1,55,786.00
connectors , suspended from the ceiling with G.I.suspenders including
G.I.bolts & nuts , etc .as required - 450 mm width
Supplying and installing following size of perforated Hot dipped galvanised
iron cable tray "bends" (galvanisation not less than 50 microns) with
perforation not more than 17.5% , in convenient sections , joined with
connectors , suspended from the ceiling with G.I.suspenders including G.I.
bolts & nuts , etc.as required - 450 mm width x 50 mm depth x 2.0 mm
Supplying and installing following size of perforated Hot dipped galvanised
iron cable tray "Tee" (galvanisation not less than 50 microns) with
perforation not more than 17.5% , in convenient sections , joined with
connectors , suspended from the ceiling with G.I.suspenders including
G.I.bolts & nuts . As required - 450 mm width x 50 mm depth x 2.0 mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
42 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying and installing following size of perforated Hot dipped
galvanished iron cable tray "Cross member" (galvanisation not less than 50
microns) with perforation not more than 17.5% , in convenient sections ,
joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts , etc .as required - 450 mm width x 50 mm depth x
2.0 mm thickness
Supplying and installing following size of perforated Hot dipped galvanised
iron cable tray "Reducer" (galvanisation not less than 50 microns) with
perforation not more than 17.5% ,in convenient sections , joined with
connectiors , suspended from the ceiling with G.I.suspenders including
G.I.bolts & nuts , etc.as required - 450 mm width x 50 mm depth x 2.0 mm
Sub Total For Electrical Works = 17,21,502.00
Outer Electical work -
Design, Fabrication, Supply, Installation, Testing and Commissioning of
22 KV Outdoor HT RMG Panel with 2 Nos. 22KV HT LBS as incomers
and 1 No. 22KV VCB as outgoing and complete with all accessoires
(SCADA Compactable) VCB: 1 No. 22kV, 1250A, 31.5kA drawout type
Vacuum Circuit breaker with 230VAC Motor and 110V DC closing/opening
shunt , auxiliary contacts - 6 NO + 6 NC. LBS - 2 Nos. of 22kV, 630A Load
Break switch complete with Fixed type Potential transformer Epoxy resin
cast type, Current Transformer - Epoxy resin cast of Ratio: ---/5-5A, Core
1: 0.2S/5VA per phase for Metering, Core 2: 5P20/15VA for protection,
Relays - 3-OC & 1 -EF relay, Master tripping relay, Voltmer and Ammeter
with selector switch, Indications/Switches/Annunciator: R/Y/B/ON/OFF/
TRIP/Trip CKt healthy/ Spring Charged Indication Lamps, TNC switch,
Space heater/illumination lamp, Powerpack - 240Vac/110Vdc, Test
Terminal blocks, Copper busbars @ 50 x 10mm mounted on epoxy resin
cast insulators, LV control fuses/power & control terminals, internal
earthing as required It shall be provided with FPI, VPI, FRTU and RMU shall
be SCADA Compactable.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
43 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Design, Fabrication, Supply, Installation, Testing and Commissioning of
22KV Outdoor HT Panel - 22KV Outdoor HT Panel with 1 No. LBS - 22kV
630A Load Break switch, Indication lamps, Annunciator, ON / OFF
Indication Lamps Thermostat controlled Anti condensation Space Heater
with switch, Door switch actuated CFL for panel illumination, MCB for
AC/DC control circuits Disconnecting/Non disconnectiong type control
terminals, Aluminium busbar, internal earthing as required. It shall be fitted
with FPI,VPI and SCADA Compactable type.
Supplying & Transportation of 22 KV 3CX185 Sqmm XLPE HT Cable from 22
KV outdoor panel to 22 KV LBS panel and then to 315 KVA transformer.
Supplying & Transportation of 22 KV 3CX185 Sqmm XLPE HT Cable jointing
kit with acessories i)Indoor - 5 Nos.
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle
Panel board, Floor mounted fabricated out of 16 SWG CRCA Sheet,
Compartmentalized with hinges door, dust & vermin proof powder coated of
approved shades. The doors and partition fabricated 18SWG CRCA sheet. S
set of RYB indication lamps , ammeter, voltmeter with selector switches ,
255 aluminium busbars with suitable rating 2 Nos earth terminals etc., complete. Set 1.00 3,18,600.00 3,18,600.00
MAIN MV PANEL ; EB Incomer : 1 No 630A 4Pole MCCB ; DG Incomer: 1 No
400A 4Pole MCCB ; Busbar: 630A TPN Aluminium Busbars 35KA per 1 Sec.
All the neutral busbars shall have half the capacity of phase busbars ;
Outgoing : 4 Nos 63 A TPN MCCB with releases ; 2 No 250 A TPN MCCB with
releases ; 1 No 400 A TPN MCCB with releases
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
44 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle
Panel board, Floor mounted fabricated out of 16 SWG CRCA Sheet,
Compartmentalized with hinges door, dust & vermin proof powder coated of
approved shades. The doors and partition fabricated 18SWG CRCA sheet. S
set of RYB indication lamps , ammeter, voltmeter with selector switches ,
256 aluminium busbars with suitable rating 2 Nos earth terminals etc., complete. Set 1.00 2,81,076.00 2,81,076.00
CAPACITOR PANEL -30 KVAR ; Incomer: 1 No 250A TPN MCCB- 36KA ;
Capacitors: 5KVAR-6Nos Busbar: 250A TPN Aluminium Busbars 35KA per 1
Sec. All the neutral busbars shall have half the capacity of phase busbars ;
5Nos 40A TPN 25KA MCCB and AC 16A Cotactor with ON/OFF
Push/Indication lamp and 5 KVAR MDXL Capacitor
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle
Panel board, Floor mounted fabricated out of 16 SWG CRCA Sheet,
Compartmentalized with hinges door, dust & vermin proof powder coated of
approved shades. The doors and partition fabricated 18SWG CRCA sheet. S
set of RYB indication lamps , ammeter, voltmeter with selector switches ,
aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.
GROUND FLOOR PANEL-1 ; Incomer: 1 No 63A TPN MCCB-36KA ; Burbar:
257 63A TPN Alumnium Busbars ; a) Compartment type outgoing 9 Nos -3 Set 1.00 2,10,040.00 2,10,040.00
Phase. Each outgoing shall have 1 metering portion with a provision of 6mm
thick hylem sheet to fix the E.B meter (3 Phase). 1 switch compartment shall
have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB ; b)
Compartment type outgoing 5 Nos - Single Phase. Each outgoing shall have 1
metering portion with a provision of 6mm thick hylem sheet to fix the E.B
meter (1 Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse
carriers, 1 No 16A DP MCB
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
45 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle
Panel board, Floor mounted fabricated out of 16 SWG CRCA Sheet,
Compartmentalized with hinges door, dust & vermin proof powder coated of
approved shades. The doors and partition fabricated 18SWG CRCA sheet. S
set of RYB indication lamps , ammeter, voltmeter with selector switches ,
258 aluminium busbars with suitable rating 2 Nos earth terminals etc., complete. Set 1.00 1,87,620.00 1,87,620.00
FIRST FLOOR PANEL-1 ; Incomer: 1 No 63A TPN MCCB-36KA ; Burbar:
63A TPN Alumnium Busbars a) Compartment type outgoing 8 Nos-3 Phase.
Each outgoing shall have 1 metering portion with a provision of 6mm thick
hylem sheet to fix the E.B meter (3 Phase). 1 switch compartment shall have
3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB
Fabrication, Supply, Installation, Testing and Commissioning of Cubicle
Panel board, Floor mounted fabricated out of 16 SWG CRCA Sheet,
Compartmentalized with hinges door, dust & vermin proof powder coated of
approved shades. The doors and partition fabricated 18SWG CRCA sheet. S
set of RYB indication lamps , ammeter, voltmeter with selector switches ,
aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.
SECOND FLOOR PANEL-1 ; Incomer: 1 No 63A TPN MCCB-36KA ; Burbar:
259 63A TPN Alumnium Busbars ; a) Compartment type outgoing 4 Nos -3 Set 1.00 1,62,840.00 1,62,840.00
Phase. Each outgoing shall have 1 metering portion with a provision of 6mm
thick hylem sheet to fix the E.B meter (3 Phase). 1 switch compartment shall
have 3 Nos 32A porcelain fuse carriers, 1 No 32A TPN MCCB ; b)
Compartment type outgoing 1 No - Single Phase. Each outgoing shall have 1
metering portion with a provision of 6mm thick hylem sheet to fix the E.B
meter (1 Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse
carriers, 1 No 16A DP MCB
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
46 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply, Transportation unloading, installation, testing and commissioning of
(TN PWD SOR Phase Segregated DB MCB type 6 Way comprising of the followings and
260 P.No-138,SI.NO- including all other accessories etc., Incomer: 1 No 40A TPN MCCB, Outgoing: Set 3.00 7,150.80 21,453.00
18b) 3 Nos 32A DP MCB, 18 Nos 6/20A SP MCB, The Panel shall be complete with
iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning
(TN PWD SOR of Phase Segregated 8 Way DB comprising of the followings and including
261 P.No-138,SI.NO- all other accessories etc., Incomer: 1 No 40A TPN MCCB Outgoing: 8 Nos Set 1.00 7,975.62 7,976.00
18c) 16/20/32A TP SP MCB The Panel shall be complete with iterconnections
and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of
(TN PWD SOR Power Distribution Board VTPN Type 4 Way comprising of the followings
262 P.No-139,SI.NO- and including all other accessories etc.,Incomer: 1 No 32A TPN MCCB, Set 1.00 10,779.30 10,780.00
19a) Outgoing: 4 Nos 10/20 TP MCB / SP MCB, The Panel shall be complete with
iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of
(TN PWD SOR Phase Segregated 4Way DB comprising of the followings and including
263 P.No-138,SI.NO- all other accessories etc., Incomer: 1 No 32A TPN MCCB, Outgoing: 3 Nos Set 17.00 6,328.34 1,07,582.00
18a) 20A DP MCB, 12 Nos 6/16A SP MCB, The Panel shall be complete with
iterconnections and earthing etc.,
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet , with 2
pole and earth , metal enclosed plug top along with 20 A "C" curve , SP,MCB,
264 in sheet steel enclosure , on surface or in recess , with chained metal cover Set 30.00 743.42 22,303.00
for the socket out let and complete with connections , testing and
commissioning etc.as required. (Electrical SOR: Item No:2.18)
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including
PSR Code accessories , and providing masonry enclosure with cover plate having
No:5.2 locking arrangement and watering pipe etc. with charcoal / coke and salt as
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
47 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including
PSR Code accessories, and providing masonry enclosure with cover plate having
No:5.4 locking arrangement and watering pipe of 2.7 meter long etc.but with
charcoal / coke and salt as required.
Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below
PSR Code ground as strip earth electrode, including connection / terminating with nut
No:5.8 , bolt, spring , washer etc.as required. (Jointing shall be done by overlapping
and with 2 sets of brass nut bolt & spring washer spached at 50mm)
PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for
No:5.17 loop earthing as required
Supply and transportation of following LT 1100V grade PVC Aluminium
269 Armoured Under ground cable as per specification confirming to IS:7098
(Part - I)./1554-I
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
PSR Code of 1.1 kV grade of following size direct in ground including excavation , sand
No:7.1.1 cushioning, protective covering and refilling the trench etc.as required -
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
PSR Code of 1.1 kV grade of following size direct in ground including excavation , sand
No:7.1.2 cushioning, protective covering and refilling the trench etc.as required -
above 35 sq.mm and upto 95 sq.mm
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
48 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
PSR Code of 1.1 kV grade of following size direct in ground including excavation , sand
No:7.1.3 cushioning, protective covering and refilling the trench etc.as required -
above 95 sq.mm and upto 185 sq.mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on wall surface as required -
No:7.7.1 upto 35 sq.mm (clamped with 1mm thick saddle) (Electrical SOR: Item
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on wall surface as required -
No:7.7.2 above 35 sq.mm and upto 95 sq.mm (clamped with 25 x3mm MS flat
clamp) (Electrical SOR: Item No:7.7.2)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on wall surface as required -
No:7.7.3 above 95 sq.mm and upto 185 sq.mm (clamped with 25 / 40 x 3mm MS
flat clamp) (Electrical SOR: Item No:7.7.3)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on cable tray as required -
No:7.8.1 upto 35 sq.mm (clamped with 1 mm thick saddle) (Electrical SOR: Item
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on cable tray as required -
No:7.8.2 above 35 sq.mm and upto 95 sq.mm (clamped with 1 mm thick saddle)
(Electrical SOR: Item No:7.8.2)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
PSR Code power cable of 1.1 kV grade of following size on cable tray as required -
No:7.8.3 above 95 sq.mm and upto 185 sq.mm (clamped with 25 / 40 x 3mm MS
flat clamp) (Electrical SOR: Item No:7.8.3)
Supplying and making cable route marker with cement concrete 1:2:4 (1
cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of
279 size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a Per no 25.00 280.50 7,013.00
thickness of 10 cm including inscription duly engraved as required.
(Electrical SOR: Item No:7.9) Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
49 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.1 XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 6 sq.mm
(19mm) (Electrical SOR: Item No:9.1.1)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.2 XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 10
sq.mm (19mm) (Electrical SOR: Item No:9.1.2)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.32 XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X10 sq.mm
(25 mm) (Electrical SOR: Item No:9.1.32)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.33 XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm
(28 mm) (Electrical SOR: Item No:9.1.33)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.20 XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X25
sq.mm (28 mm) (Electrical SOR: Item No:9.1.20)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.21 XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X35
sq.mm (32 mm) (Electrical SOR: Item No:9.1.21)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.21 XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X50
sq.mm (28 mm) (Electrical SOR: Item No:9.1.21)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
50 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying and making end termination with brass compression and PVC
287 sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - Per set 2.00 118.82 238.00
31/2 X70 sq.mm (38 mm) (Electrical SOR: Item No:9.1.23)
Supplying and making end termination with brass compression gland
PSR Code and aluminium lugs for following size of PVC insulated and PVC sheathed /
No:9.1.26 XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X150
sq.mm (50 mm) (Electrical SOR: Item No:9.1.26)
Supply and laying of following sizes of Armoured Aluminium / Copper
Cables for electrical motor, control panel, pressure switch, jockey motor etc.,
TN SOR SI.No- all incidental charges, neccessary scaffolding and re-doing the dismantled
V1,P.NO-89 portions to its original condition wherever found neccessary, etc.,
completeas per standard specification and as directed by the Departmental
Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.
Sub Total For Outdoor Electrical Works = 49,33,862.00
Supply and erection MS swaged tublar pole with base plate and single
ornamental bracket two coats coats of zinc chromate and two coats of
aluminium / epoxy painting. Pole height-8 mt. Pole dimension 139.7 x 4.5 x
4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x 1750mm, bracket
dimension 60.3 X 3.65mm x 2700mm - 1no, base plate dimension 300mm x
300mm x 5mm, overall height - 9.5mts including excavation of earth column-
750x 750 x1650mm and cement concrete 1: 2: 4 of volume 750 x750 x
1650mm filling and capping above ground level 450mm dia x 600mm
height. One coat of zinc chromate and two coat of aluminium / epoxy
painting should be done after erection of the pole and inclusive of suitable
length 1.25mt.- 2 nos. of 40mm dia medium class GI pipe for cable raising as
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
51 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supply and erection MS swaged tublar pole at top with base plate and
double ornamental bracket two coats of zinc chromate and two coats of
aluminium / epoxy painting. Pole height - 8mt. Pole dimension - 139.7 x 4.5
x 4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x 1750mm, bracket
dimension 60.3mm x 3.65mm x 2700mm - 2no, base plate dimension
300mm x 300mm x 5mm. Overall height - 9.5mts. including excavation of
earth 750x 750 x1650mm and cement concrete 1: 2: 4 of volume 750 x750 x
1650mm filling and capping above ground level 450mm dia x 600mm
height. One coat of zinc chromate and two coat of aluminium/epoxy painting
should be done after erection of the pole and inclusive of suitable length
1.25mt.- 2 nos. of 40mm dia medium class GI pipe for cable raising
Supply and installation of 16 mtrs. High mast system with its accessories
mast shaft shall be in two sections , hot dip galvanised (as per BS 729 or
equivalent) and suitable for wind velocity as per IS 875-1987 (180 km
/hour). It shall also include accessories for high mast including head frame ,
292 17.3.2 stainless steel wire rope 6mm dia (7/19 construction) double drum per No 3.00 2,68,334.38 8,05,004.00
winch , which galvanized lantern carriage arrangement suitable for 12
(twelve) luminaries symmetrically and its motorised control gear boxes and
lighting final. (as per detailed technical specification as shown in annexure -
293 1207 Supply of 48W LED Street Light Fitting(Philips / Havells ) No 43.00 4,147.50 1,78,343.00
Supply of 120 W LED street light as per specification of tender document on
existing poles including all accessories for retrofitting the existing SVL/MH
fittings make philips/Havells/ Crompton/ Bajaj/ Equivalent Make The rate
is inclusive of all taxes
Fixing testing and commissioning of LED street light fittings on existing
poles as required
Sub Total for Street Light = 16,54,268.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
52 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Supplying of 125kVA/100kW 3 phase, 415 volts, 50 cycles, 0.8 power
factor for electric starting diesel generator comprising the following units :-
( Kirloskar/Leyland/Ruston/Greaves Cotton/ Cummins make) water cooled
and shall be of multi stroke, multi cylinders, cold starting, developing not
less than154 BHP under normal temperature and pressure. The engine shall
conform to I.S. 10002 with latest amendments. It shall be capable of taking
10% over load for one hour in every 12 hours of continous operation
296 31.280.1H including 6 Nos. of anti vibration pads.The engine shall be complete with the No 1.00 8,73,360.30 8,73,361.00
following accessories:Electrical starting provision, engine cooling fan, fuel
and lubricating oil filters, oil bath, air filter, lub oil pressure gauge 250 litres
capacity fuel tank mounted with engine, hour meter with exhaust manifold,
flexible pipe, 12 /24 volts electric starting equipment complete with starter,
alternator and two numbers of 12 volts with 21 plates battery of make (with
Guarantee cards) of adequate capacity and low lubricating oil pressure/high
temperature varying engine shut down devices.
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
53 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
The Acoustic enclosure shall have the following powder coated and
fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut
bolt type construction. Powder coating is done after seven tank surface
preparation process of sheet metal. Canopy panel and doors shall have
inside lining of FIRE-RETARDANT foam/Rock Wool as acoustic material.
Four hinged doors shall be provided to canopy, one door shall have glass
window for control panel.Base frame is fabricated either in ISMC channel or
in sheet metal. The base frame is rugged in construction and designed for
mounting engine and alternator, with cross members mounted on AVM. The
base frame shall have provision for mounting of acoustic enclosure and it is -
having provision of lifting hook for convenient lifting of complete set, i.e.
along with canopy, engine and alternator.Fuel tank shall be fabricated out of
14 SWG CRCA MS sheet and is part of base frame. It is duly painted and
fitted with inlet and outlet connections of suitable capacity.The Acoustic
enclosure shall be Type test approved as per CPCB norms. The average
sound level, when measure in green field condition (ISO m3744 OR 8528 PT
10) at 1-meter distance from all four sides shall be less than 75-dBA average
or as per CPCB norms. The average stabilized hot air temperature rise with
in the canopy is maintained with in 10 C over and above ambient
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
54 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
ambient temperature.Acoustic enclosure is suitable for Outdoor / Indoor
installation. Lockable doors shall be provided. Lockable fuel filling
arrangement to be provided external to the canopy. Residential Silencer is
housed in the canopy. The exhaust gasses shall be taken out through a
suitable flexible pipe to prevent any back pressure on the engine.Base frame
sturdy, fabricated welded consruction, channel iron / sheet metal base
frame for mounting the above engine and alternator.Standard Tools and
Spares:Double ended spanners complete set (small and big size sets) - 12
Nos. Screw driver (30cm long) Taparia make .Screw driver (45cm long)
Taparia make .Cutting plyer.Diesel filter with elements - 2 Nos.Oil filter with
elements - 1 No.All the above accessories with complete set.AlternatorThe
alternator shall be of self excited, self regulated, screen protected, drip
proof alternator with static excitation system capable of developing 125KVA
at 0.8 ower factor 415 volts, 3 phase, 50 cycles, generally conforming to
I.S.4722 under normal condition, the voltage regulation will be plus or
minus 5% of rated voltage. It shall be with end shield/ball roller bearings
complete.Control PanelA wall/pedestal mounting (cubical type) fabricated
sheet steel construction suitable for manual operation, rated for system
Marking earth pit of G.I. pipe for earthing pit with 40mm dia.G.I.pipe
medium class of length 3.05m perforated with 46 nos of 12mm dia
PSR Code .holes,pipe lowered in bore holes of 150mm dia and filled in with charcoal
No:5.2 and salt in alternative layer of 300mm,the top of G.I.pipe shall be clamped
Earth pit shall be provided with 60cm dia precast ring with 60cm depth
alround covered with R.C.C precast slab etc as per I.E.Standards.
Providing & Fixing of suitable MS exhaust pipe including 2 Nos of MS
bends(long),7 Nos of MS flanges, MS pipe class B - 5 Rm as flexible exhaust
pipe. The rate is inclusive of transportation charges for shifting of welding
298 Approved Rate machine and gas cutting set to site,consumption of welding rod 10 SWG and Rm 2.00 8,850.00 17,700.00
cutting gas,providing fasteners of 10mm bolts/nuts/washers and flange
gaskets including labour charges etc. asper IE standard - 65mm dia exhaust
Pipe (Up to 625 KVA)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
55 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Providing & Laying of aluminium cladding with 50mm thick glass wool slab
299 Approved Rate with chicken mesh and covered with 24 SWG aluminium sheet (the rate Sqm 4.00 1,550.00 6,200.00
includes double calculation for flanges & bends) asper I.E.standards
Supplying & Fixing of copper flat (25x3mm) for earthing arrangements
including bolts and nuts etc.
301 Supplying & Laying of 3.5x300 sqmm underground aluminium PVC Cable Meter 45.00 1,829.00 82,305.00
PSR Code Providing and termination of cable joint with suitable cable gland,cable
No:9.1.16 socket etc.,complete -3.5x300 sqmm cable
Design,fabrication and supply of 125 KVA DG Set AMF (Auto Main Failure)
control panel with EB Service and it consists of the following parts 1.200A
4P Power conductor L&T -2 Nos,2.24V Battery Charger - NHP -
1Nos,3.Auxiliary Relay - PLA-6 Nos,Auxiliary Conductor C&S - 4
303 Approved Rate Nos,5.Indication Lamp 12 Nos idea- 12 Nos,6.Push Button - Rass controll- Nos 1.00 1,55,000.00 1,55,000.00
2Nos,7.Selector Switch - Slazer - 4 Nos,8.Earth fault Relay-Electronic - 1
Nos,9. Multi function Meter - Rizhab - 1No,10.Timer - Eapl- 2 Nos,11.LVM -
L&T- 1No,12.30x10 Aluminium Bus bar,13.Necessary Power & Control
wiring,14.Cubical made of 16/18 CRC Sheet with siemens grey power coat
Sub Total for Generator = 11,89,789.00
Transformer 315 KVA
Supply, erection, testing and commissioning of 22KV/433Volts, 315kVA,
Level-2 Energy efficient type Distribution Transformer of outdoor oil cooled
304 type with OLTC, Cable box on HV side and LV side and all other standard Set 1.00 8,50,000.00 8,50,000.00
accessories as per IS 1180. The load losses and no-load losses should be as
per latest IS 1180.
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including
PSR Code accessories , and providing masonry enclosure with cover plate having
No:5.2 locking arrangement and watering pipe etc. with charcoal / coke and salt as
required. (Electrical SOR: Item No:5.2)
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
56 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
NAME OF THE PROJECT: NEW INTRA CITY BUS TERMINUS ALONG WITH COMMERCIAL SPACE DEVELOPMENT AT PUDUCHERRY
BILL OF QUANTITIES
S.No Item No Description of Item Unit Quantity Rate Total Amount
S.No Item No Description of Item Unit Quantity Rate Total Amount
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including
PSR Code accessories, and providing masonry enclosure with cover plate having
No:5.4 locking arrangement and watering pipe of 2.7 meter long etc.but with
charcoal / coke and salt as required. (Electrical SOR: Item No:5.4)
Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below
ground as strip earth electrode , including connection/ terminating with nut
307 , bolt, spring , washer etc.as required. (Jointing shall be done by overlapping Meter 60.00 444.89 26,694.00
and with 2 sets of brass nut bolt & spring washer spached at 50mm)
(Electrical SOR: Item No:5.8)
PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for
No:5.17 loop earthing as required (Electrical SOR: Item No:5.17)
Sub Total for Transformer 315 KVA = 8,96,387.00
Total amount in Electrical Works = 1,03,95,808.00
Total amount in Electrical Works = 1,03,95,808.00
Digitally signed by
DEEPAK DEEPAK KUMAR MEHRA
57 of 58 KUMAR MEHRA Date: 2023.03.18 13:25:46
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT New Bus Stand.pdf
Tender Document
GCC 2022.pdf
Tender Document
SCC.pdf
Tender Document
Integrity Pact.pdf
Tender Document
List of Approved Makes.pdf
Tender Document
TENDER DRAWINGS.pdf
Tender Document
Technical Specification.pdf
Tender Document
Addendum 01.pdf
Tender Document
Tender BOQ.pdf
Tender Document
corrigendum-1482-Corrigendum 02.pdf
pdf • 0.06 MB
addendum-f526c3e661c6-Addendum 1.pdf
pdf • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .