Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹15.8 L+₹31,965.39 (2.07%)Rejected-AOC | L2 | Rejected-AOC L1 Accepted | |
| 3 | L3₹15.8 L+₹35,248.06 (2.28%)Rejected-AOC | L3 | Rejected-AOC L1 Accepted |
Tender Value
₹16.4 L
EMD Value
₹24,600
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer Electrical Division Harbour
O/o The chief Engineer, Harbour Engineering Electrical Division, Kamaleswaram, TVPM
Construction of additional berthing facilities at Kayamkulam Azheekkal Fishing Harbour -Auction hall Electrification
2022_HED_503639_1
27/HEED/2022-23/S
Open Tender
Electrical Works
Item Rate
60 days
AZHEEKKAL, KAYAMKULAM
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,760
₹24,600
15 Oct 2022
16 Aug 2022
31 Aug 2022
16 Aug 2022
29 Aug 2022
16 Aug 2022
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required4 X 6 sq. mm + 2 X 6 sq. mm earth wire
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden blockincluding connection etc as required.
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Supply and fixing 5W/ 9 W LED ,BC, lamp OSRAM or equivalent
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.1.50 sq mm
Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
Fabricating, supplying, and fixing tubular post of overall height of 3m using 65mm Heavy G.I. Pipe having ISI mark and of approved quality as per the drawing, with a 12mm thick GI flange and Table E dummy Flange suitable for 65mm heavy duty C class pipe at the top of the post and 75mm x 40mm C channel welded on the top of the flange with bolt holes to fix the lamps and fixing 2 Nos clamp made out of 50 x 6 mm GI flat at the bottom using 8 Nos 12mm stainless steel screws and fixing the pole on the top of the roof by drilling concrete through roof slab along the side of the pillar up to 60 cm length downwards.The post is to be painted with two coats of best quality industrial epoxy paint over two coats of industrial epoxy primer .Cable entry provision by inverted Y arrangement at the top making good the damages by filling the hole with 1:1.5:3 concrete mix ,position cement concrete 1:2:4 of seize 250mmX250mmX300mm muffing for pole above the floor, plastering ,colour washing etc complete
Supply and installation of wall mounting cubicle type dust and vermin proof CAPE make BRES64 600 x 400 x 230 mm Glass Fibre Reinforced Polyester Enclosure IP66, IK 10 outdoor meterbox or equivalent with provision for fixing KSEB meter, cut out & Neutral link and, with sufficient holes for fixing KSEB electronic energy meter, cut outs and neutral link. Supply and providing 3 Numbers of 100A HRC fuse units with 80A HRC fuse link and 1No 32A 2way neutral link in the meter portion. Necessary holes are to be provided in the box for entry and exit of wire. The inter connection should be done using 10.0 sq.mm copper wire
Supply of IP66, IK 10 rated 100W CW flood light luminaire with body of aluminium extrusion having luminaire efficacy >= 120 lumen/watt at correlated colour temperature (CCT) of 5700K , Colour rendering index (CRI) > 75 and L70 rated lifetime of 50,000 hours.supplied with IP67 rated best in class LED driver Electrical Class I, rated voltage 240Vac, Power Factor 0.90, with BIS certified potted driver having surge protection of 5/10 kV (in Common & Differential Modes) . 5 year warranty .Preferred make:Kesslec-K Flood 100W- Cool White
Supply of dust and water proof surface mounted (IP65) luminaire suitable for twin T8 TLED lamps with LED tube preferred make PHILIPS TCW450 P2XTLED 19W P3397 or equivalent
Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
Supply of BIS approved LED Luminaire with system wattage of 35W, made up of pressure die cast Aluminium body and anti UV PC Protector with integrated lenses for increased pole spacing and uniform light distribution, IP66, IK 08, system efficacy of 110 lm/W, CCT 4000K, operating temp range up to 50 degree and designed for efficient thermal management, lumen maintenance L70@ 50000Hrs, Upward Light Output Ratio is 0% at zero degree inclination to avoid light pollution, suitable for side / vertical mounting up to 48mm diameter, Colour Rendering Index > 70, a driver efficiency > 85%, with internal surge protection of 4kV and Power factor > 0.95.Make: Keselec Cat Ref: Nice-R 35W NW LED or equivalent
Conveyance, installation, testing and commissioning of departmentally supplied flood light / Area light luminaire with lamp on the existing tubular post of height upto 8m from ground level.
Supply and fixing HINGEDJunction box minimum dimensin of 85x85x45 made of Thermoplastic Glass Fiber Reinforced Polycarbonate, UV resistance,IK08 Degree of Ingress Protection IP 65in accordance with IEC 60529,including 5 Pole Copper Terminal Set, pre punched / knock out for cable entry in all the four sides as well as on the back side, rated insulation voltage has to be min 690V., thermoplastic JB shall be fire retardant & self-extinguishing, the combustion behavior shall be in accordance with VDE 0471 / UL 94 for 960degC. The screws has to be made of stainless steel. . Make: Cape/Spelsberg/Hensel
Supply and fixing IP 65 outdoor installation CAPE 24 module( Model No Aki 24) 370x250x122mm Thermoplastic polycarbonate MCB distribution board with PE + N Terminals on the surface using suitable size stainless steel screws.
Supply and fixing IP 65 outdoor installation CAPE 12 module( Model No AKI12) 250x200x122mm Thermoplastic MCB distribution board with PE + N Terminals on the surface using suitable size stainless steel screws complete
Supplying and fixing HENSEL make KV-thermoplastic circuit breaker boxes IP65 with metrick knock out for cable entry , 1 rows 12 modules size 295x333x129 KV 9112 M with PE+N terminals
Supply and fixing Cable Junction Boxes IP 66 for outdoor application( with metric knock outs for cable entry - Black Colour)) suitable for cable sizes 10 Tto 25 sq.mm ,205 X 255 X 112 mm Hensel model No KF 2525 B or equivalent and Terminal Set 2.5 sq.mm / 4 sq.mm including giving necessary connections, making good the damages etc. as required.
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing asrequired.
Supply of superior quality copper earth socket for the 3.15mm (10 SWG) earth conductor including crimping etc. as required.
Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required.
Supply and laying bare earthing copper conductor 6 SWG laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in Ordinary soil)
Fabricating, supplying, conveying, lifting and erecting single arm tubular post of overall height 6 m using 6m 100mm and 1.0m 50mm of Heavy duty G.I. Pipe sections having ISI mark and of approved quality as per the drawing erected on a RCC footing using 1:2:4 CC with nominal reinforcement , 1 No of PCC well steining having 0.75m dia and 0.3m height and 3Nos of PCC well steining having 0.65m dia and 0.3m height with a muffing of 0.6mx0.6mx 0.8m and 4 numbers of 20mm dia 2.5m long G.I foundation bolts having 100mm long standard thread at the top , 3Nos 20mm hot dipped nuts at the top for each bolt . The post is to be provided with a 16mm thick G.I flange of OD 250mm with 4 Nos of 20mm bolt holes and a base plate of 600mm square 10mm thick with 4 Nos 20mm dia bolt holes embedded in the concrete 1.5m below ground level. The top portion of the post should be bend to shape 75 degree from vertical using 50mm heavy GI pipe as per the drawing attached. The post is to be painted with two coats of UV resistant polyeruthene paint of approved quality and colour over two coats each of best quality industrial epoxy primer and epoxy paint and two coats color washing on the muffing.All steel items shall be dip galvanised. .All GI pipe sections to be used for the fabrication of the post shall be of TATA / ZENITH / APOLLO MAKE
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm
Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 6 sq. mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
Engaging helper for disconnecting and removing the existing wiring and reconnecting as necessory
Fabricating, supplying, erecting and commissioning of wall mounting, fully compartmentalised, dust and vermin proof cubicle Panel board of size 900x2100x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality epoxy paint over two coats of epoxy primer of approved quality, having front openable bolted type vertical bus bar chamber & cable alley covers with cable entry provisions and bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top. The panel should have 75x40x6.0mm MS channel provided at the bottom as support and comprising the following(Panel drawing attached with the schedule) Incomer: 100 A, 4 Pole, 415 Volts AC : AC23A duty ON LOAD COS with handle-1 No Incoming:- 100A, 25kA FP MCCB setted to 80A and rotory drive kit including BUC handle - 1No Outgoing:- 40A, 25kA TP MCCB setted to 32A and rotory drive kit including BUC handle -3Nos Outgoing:-25A, 25kA TP MCCB setted to 16A and rotory drive kit including BUC handle -3Nos including suitable rating 2way neutral link -6 nos ,All switches and MCCB should be of panel mounting and conforming to IS:13947part III (L&T/SIEMENS/Legrand) Busbar Chamber: Busbar chamber with 100A Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators as required. Metering and Indication:- Panel surface mounting 96 Sq.mm,LED Multi-function meter with three line display to read V,A,PF & F SCHNEIDER or equivalent suitable for 415V,50Hz- 2No, 3Nos 100/5 A tape wound CTs.,22.5mm dia LED type indication lamps for three phases(R,Y &B) - 2 set and control Group B 2A SP MCB (C Curve)-7 numbers inside the cubicle. The panel board should have hinged shutters for MCCB cubicles and front openable bolted type busbar covers with quarter turn type lock and key arrangement and it should be fabricated as per Kerala State Electrical Inspectorate's norms and only after obtaining approval from the departmental officers at site for the design. Panel internal earthing should be provided using 25x3mm copper strip with two earthing points brought out at bottom side. (Panel drawing attached with the schedule) Protection :- ELR with CBCT - 1 No, Shunt release and Auxiliry contact suitable for 100A MCCB
Supply and installation of wall mounting cubicle type dust and vermin proof size 4 HENSEL make 600x300x214mm Mi2410 thermopalstic box including supply and fixing 40A-63A , 25kA 4P MCCB, with rotary handle and drive kit, 3 Nos phase indication lamp and 3 Nos 2A SP MCB ,DIN rail including wiring using 2.5 sq.mm wire for control wiring .
Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL
Supplying and fixing surface /recess mounting 4 way , Double door , dust and water proof IP 66 Hensel make or equivalent FP VN 0412 opaque door, 8+12 VTPN distribution board of poly carbonate inclusive of tinned copper busbar, common neutral link, earth bar, din bar for mounting MCB's with provision for MCCB as incomer.
Supplying and fixing surface /recess mounting 8 way , Double door , dust and water proof IP 66 Hensel make or equivalent FP VN 0812 opaque door, 8+24 VTPN distribution board of poly carbonate inclusive of tinned copper busbar, common neutral link, earth bar, din bar for mounting MCB's with provision for MCCB as incomer.
Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.
Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.
Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal)
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
Painting letters or figures of the sizes 2.50 cm, 4 cm or 5 cm height with enamel paint as identification mark to SB, DB, panel board etc as required
Providing and fixing 0.3 m , 20 mm X 3 mm copper strip on surface or in recess for connections etc. as required.
Conveyance, installation, testing, and commissioning of T 5 outdoor light fitting with FL lamps/LED/ SV/ MH/ CDMT light fittings with all accessories and lamp, etc. of all types directly on the existing pipe/ pole including giving connections with the existing wiring, etc as required
Aluminium anodised Danger Notice Board of size 200 x 150 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.
Supply and providing 6 mm thick & 1 m wide electrical grade chequered type rubber mat to withstand 3.3 KV dielectric strength conforming to IS 15652/2006
Supply and installation of DCP type fire extinguisher 5 Kg capacity of M.S cylindrical body , squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cm longhigh pressure discharge hose, nozzle etc
Providing and fixing 12 SWG insulated GI wire for service wire binding along with service line complete with all accesaries complete as required.
Supply and providing single line diagram duly framed,laminated and placed in a conspicuous location for clear vision
Supplying and fixing suitable size cubicle door using 14G powder coated Aluminium frame and 3mm thick outdoor ACP with fixtures like hinges,Tower bolt and pad lock etc complete
KSEB Documentation Charge
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Mild steel and Medium Tensile steel bars
THEJUS ELECTRICALS
BIJUMON B
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_721415.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .