SPECIAL REPAIR/ RENOVATION BLDG NO P-268 (02QTRS) ORs MD ACCN AND P-133 (03 ORs MD ACCN) GROUND FLOOR IN JUNGLE AREA AT CLEMENT TOWN

Amount

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) including 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces 300 x 450 x 6 - 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar (1:4) incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in slab and shelves supported on walls or in Chajja projection incl demolition of reinforeced cement concrete of any description and in any position all as specified and directed Note : The work is required to be carried out upto IInd storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour

M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizontal or sloping) rough finished flat surface all as specified

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including welding to existing reinforcement complete all as specified and directed.

M&L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15mm thick screed in CM (1:6), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing incl rounding the edges complete incl demolition of cement concrete 40 mm thick as in floor complete all as specified.

M&L for machine cut Kota stone slab 10-12 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing incl taking down cement plaster on brick or concrete surfaces complete all as specified and directed.

M&L for 16 -18mm thick Granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:6 including grinding/chamfering and polishing the edges complete all as specified and as directed .

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete incl demolition of brick work built in cement mortar all as specified.

M&L for half brick work with sub class 'B' old size bricks straight or curved on plan to any radius built in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed.

S&F cupboard mild steel door shutter two leaves with frame of 18 guage MS sheet with locking arrangement and handle etc all as per godrej pattern with 4 lever lock and duplicate keys including two coats of spray painting over a coat of red oxide zinc chromate primer complete. The MS frame of size 40x40x5mm of cupboard to be fixed to wall with 6 Nos of hold fast 25x3mm flat iron, 15cm long, the cost of MS frame and hold fast and groutng them in CM (1:3) is deemed to be included in unit rate (only front face of the cupboard to be measured) complete all as specified and directed.

S&F framed work as in doors or gates, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed.

S&F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe - 290 Gde E - 165 complete all as specified and directed

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in hold fast blocks including all form work complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified.

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed.

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified.

S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel powder coated and section of shutter 47x20mm, mulion section 72 x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 150mm c/c both ways, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth width 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm each pane complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing.

S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as spcified and as directed.

S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as spcified and as directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as spcified and as directed.

S&F extruded aluminium alloy handle of size 150mm, fabricated type, anodised complete all as spcified and as directed.

S&F mild steel 160mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spcified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as spcified and as directed.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A incl dismantling mild steel work of any description complete all as specified and directed.

S&F welded steel wire fabric weight n. exc 4 Kg per Sqm suitable to weld with steel members complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth incl demolition of cement concrete 75mm thick as in plinth protection/path complete all as specified and directed.

S&F 25mm dia drapery rod fancy powder coated wooden finish fixed to wall with wooden finale and brackets complete all as specified.

M&L for 15mm thick plaster in CM (1:4) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified.

M&L for applying two coats of weather proof exterior emulsion paint (Apex) over a coat of 2mm thick cement putty to achieve smooth surface after preparation of newly plastered/concrete surfaces on wall complete all as specified and as directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex) after complete removal of existing treatment including preparation of old plastered/concrete surfaces on wall complete all as specified. (Note :- The exterior emulsion weather coat shall be applied with roller only)

M&L for 15mm thick plaster in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone masonary wall including racking of joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper of approved tint over a coat of 3mm thick wall care putty complete all as specified and directed.

M&L for applying two coats of oil bound distemper of approved tint over a coat of 3mm thick wall care putty on walls after complete removal of existing treatment complete all as specified and directed.

M&L for 5mm thick plaster in ceiling of CM (1:3) on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper of approved tint over a coat of 3mm thick wall care putty on ceiling complete all as specified and directed

M&L for applying two coats of oil bound distemper of approved tint over a coat of 3mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed.

S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and as directed.

S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and as directed.

S&F in repair 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified and as directed.

S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repair chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified and as directed.

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and as directed. (Make : Cera/Hindware/Parryware).

S&F in repair PVC white low level flushing cistern 10 ltr capacity dual type with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F in repair of sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.

S&F in repair PVC waste pipe 32 mm dia complete all as specified and directed.

S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and as directed.

S&F in repair acrylic glass corner shelf with CP brass railing size not less than 300mm long and fix to wall with rawl plug and CP screws complete all as specified and directed.

S&F in repair rotational moulded PVC water storage tank multi layered cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.

S&F in repair 100mm bore dia CI waste and vent spun pipes, in any length with or without ears, with cement joints fixed to wall complete all as specified and directed.

S&F in repair 75mm bore dia CI waste and vent spun pipes, in any length with or without ears, with cement joints fixed to wall complete all as specified and directed.

S&F in repair 100mm bore dia CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F in repair 100mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed.

S&F in repair 75mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed.

S&F in repair 75mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F in repair 100mm dia CI cowl complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 300mm x 300mm x 20mm thick jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) and 75mm thick PCC (1:4:8) type D2 complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including mixed with water proofing compound @ 3% by wt of cement incl demolition of PCC in any description complete all as specified and directed. (Note :Water proofing compound will be measured and paid separately).

Supply only integral water proofing compound.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

(a) One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5 Amp switch complete all specified and directed.

One 3pin/5pin 5 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 78 above but with 2.5 Sqmm PVC insulated FRLS cable for 15 Amps power point switch complete all specified and directed.

All as per item No 78 above but with 4 Sqmm PVC insulated FRLS cable for 15 Amps power point switch complete all specified and directed.

Supply and fixing switch piano flush type single pole, one-way 5/6 Amps, 240 Volts AC switch complete all specified and directed.

Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC switch complete all specified and directed.

Supply and fixing bell push piano flush type single pole one way 6 Amps switch complete all specified and directed.

Supply and fixing socket out let 5 pin 6 Amps flush type switch complete all specified and directed.

Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC switch complete all specified and directed.

Supply and fixing bell ding dong AC 230/240 Volts single pole switch complete all specified and directed.

Supply and fixing step socket type fan regulator 120/280 V switch complete all specified and directed.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals switch complete all specified and directed.

Supply and fixing batton/angle holder insulated bodywith back plate suitable for batten fittings switch complete all specified and directed.

Taking out ceiling fan from existing building again refixing the same ceiling fan connecting up including provision of cable flexible 3 core of suitable size wire from ceiling rose to connect fan complete all as directed.

S& F wall mounted LED batten Box type fitting Blu colour end caps pre-wired LED fitting all as per cat part No DMLN 1 LT 8-16 with & including LED T8 tubular lamp of make Cromption or equivalent make in C&S/ Havells /Philips switch complete all specified and directed.

S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as per cat part No- LBHP-10-CDL of make Crompton / or equivalent make in philips / Havells / C&S.

S& F Glaze Wall Light including 7/9 watt LED ( B22) Cat Part No -LHFOECE1TZ1B014 of Havells or Philips/ C&S /Cromptonswitch complete all specified and directed.

S & F in repair LED building security light with bracket and fixing arrangements 25 watt LED with bracket complete all as specified and directed. Cat Part No LSTS-25 CDL of Crompton or equivalent make in Havells/ C&S

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed .

Supply and fixing single pole and neutral enclosure with a two pin and earth plug & socket complete with one, single pole MCB 20 Amps 10 KA repturing capacity 240 Volts AC all as specified. Make -Legrand, Hair, Schnider

Supply and fixing MCB 5 to 30 Amp 'C' series 10 KA repturing capacity complete all as specified.

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified.

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FR ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC (1:2:4) type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC (1:2:4) type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Saurav Enterprises

P K ASSOCIATES

M/s RK ENTERPRISES

Nanda Brothers