Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC 77 KAILASH PURI BIKANER RAJ C 15 SWC JAIPUR | BIKANER | RAJASTHAN | 331801 | L1 | Accepted-AOC Lowest Bidder, Hence accepted | |
| 2 | L2₹10.8 L+₹12,889 (1.21%)Rejected-Finance 77 KAILASH PURI BIKANER RAJ C 15 SWC JAIPUR | BIKANER | RAJASTHAN | 331801 | L2 | Rejected-Finance Not Lowest Bidder, Hence Rejected | |
| 3 | L3₹10.9 L+₹26,419 (2.48%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder, Hence Rejected |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
10 Mar 2021, 6:00 pmClosed
GE (AF) PHALODI
Military Engineer Services Garrison Engineer (AF) Near Kundal Village, Phalodi (Rajasthan)-342 301
REPAIR/MAINT OF DG SET AND CONNECTED ITEMS AT AF STN PHALODI
2021_MES_420967_1
8328/A/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
PHALODI
All contractors enlisted with MES in Class E and above and category b(i) subject to the remarks wrt performance in respect of Wks in hand reflected in Workload return (WLR) Circulated by competent engineer authority.
7 documents required · 7 mandatory
₹500
GE (AF) PHALODI
₹30,000
Yes
30 Mar 2021
10 Feb 2021
12 Mar 2021
10 Feb 2021
10 Mar 2021
26 Feb 2021
10 Feb 2021 - 20 Feb 2021
Amount
M & L for general servicing of DG Sets of capacity 20 KVA to 62.5 KVA comprising of following jobs i.e. transportation, labour charges & minor materials required for servicing as required complete all as specified and directed :- (i) Cleaning of complete DG set & greasing of the parts. (ii) Tappet setting as per standard. (iii) Fan belt, tensioner pulley and lever adjustments. (iv) Tightening of all the nuts, bolts and clamps. (v) Testing & checking of AC & DC Wiring. (vi) Self & Charging Alternator cleaning and testing, checking of working & minor fault removal. (vii) Checking of Supply & return fuel pipes from fuel tank to engine. (viii) Checking of FIP timing by Fuel cut off method. (ix) Unserviceable/broken/removed DG Set doors shall be repair and refixing.
Note for Srl Item Nos. 1 to 5 :- (i) The contractor shall be arrange/provide minimum 4 Nos visit (Each after One and half month) for inspection to check the helth/funtion of DG set and AMF Panel by uthorised dealer/representative through O.E.M of manufactures engineering /technician only and the visiting charges of technician/ Engineer shall be deemed to be inclusive in quoted rate of items.
Ditto all as per Item No. 1.00 (here-in-before) but DG set of capacity 75 KVA to 100 KVA complete all as specified and directed.
Ditto all as per Item No. 1.00 (here-in-before) but DG set of capacity 125 KVA complete all as specified and directed.
Ditto all as per Item No. 1.00 (here-in-before) but DG set of capacity above 160 KVA to 200 KVA complete all as specified and directed.
Ditto all as per Item No. 1.00 (here-in-before) but DG set of capacity 500 KVA complete all as specified and directed.
S & F in renewal of engine oil filter as per existing & suitable for following capacities of DG sets complete all as specified and directed :-
DG Set of capacity 20 KVA to 62.5 KVA
DG Set of capacity 75 KVA to 125 KVA
DG Set of capacity 160 KVA to 200 KVA
DG Set of capacity 500 KVA
S & F in renewal of diesel filter as per existing & suitable for followling capacities of DG set complete all as specified and directed :-
DG Set of capacity 20 KVA to 62.5 KVA primery & secondary set.
DG Set of capacity 75 KVA to 125 KVA primary and secondary set.
DG Set of capacity 160 KVA to 200 KVA primary and secondary set.
DG Set of capacity 500 KVA primary and secondary set.
S & F in renewal of air cleaner elements inner and outer for DG Set of capacity 20 KVA to 62.5 KVA complete all as specified and directed.
S & F in renewal of air cleaner elements inner and outer for DG Set of capacity 75 KVA to 125 KVA complete all as specified and directed.
S & F in renewal of air cleaner elements inner and outer for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of air cleaner elements inner and outer for DG Set of capacity 500 KVA complete all as specified and directed.
Supply and filling in renewal of Premixed coolent suitable for DG Set complete all as specified and directed.
Supply and filling in renewal of sump/topping up engine oil, multi grade 20W40W in engine & including renewal of old engine oil complete all as specified and directed.
M & L for dismantling and re-fixing of the radiator and fan of from the engine of DG set of capacity 20 KVA to 500 KVA for cleaning of copper tubes and cooling fins by using descaling solution and soldering, patch work including water pumps assembly, renewal of defective water pumping assembly and including transporting to repair workshop and vice vessa complete all as specified and directed. Note :- The engine parts to be repaired under above item for work shop shall be issued to contractor with proper nomonal issue vouchers & taken back duly repaired with Challan & proper nominal receipt Vouchers which shall be form part of RAR/Final bill.
M & L for re-winding and re-fixing of alternator field coil with super enamelled copper winding wire insulated of suitable size as per existing copper wire complete all as specified and directed for following capacities of DG Set :-
DG Set of capacity 20 KVA to 62.5 KVA
DG Set of capacity 160 KVA to 200 KVA
DG Set of capacity 500 KVA
S & F for in renewal of all type of hose pipe, over flow pipe, copper tube fuel supply pipe with clip, all as per existing size, Make & Model and including fittings complete all as specified and directed.
S & F for in renewal of two sided threaded fuel pipe with wrapped with steel wire as per existing size, Make & Model complete all as specified and directed.
S & F in renewal of feed pump suitable for DG Set of capacity 63 KVA to 500 KVA complete all as specified and directed.
M & L for repair, overhauling and calibration of PT pump complete with any capacity of DG Set, renewal of won out parts such as bearings, plunger, impeller and oil seal etc and including re-fixing fuel injuctor pump complete all as specified and directed.
M & L for repair, overhauling and Calibration of injector nozzel assembly complete with any capacity of DG Set, by renewal of injector cups, barrels, plunger whichever required for smooth functioning of engine of DG Set complete all as specified and directed.
S & F in renewal of fan belt as per existing size and make suitable for DG Set of capaciity 63 KVA to 500 KVA complete all as specified and directed.
S & F in renewal of AMF Controller for AMF panel as per existing complete all as specified and directed.
S & F in renewal of auto cut electrical battery charger unit SMPS as per existing with constant voltage output with battery charging transformer and moulded type rectifier unit, complete all as specified and directed for the following Capacities :-
Battery Charger 12 Volt DC, 5 Amp
Battery Charger 24 Volt DC, 10Amp
S & F in renewal of LT heavy duty 4 pole ON load change over break switch, 415 volts, 50 Hz, with handle assembly having door interlock and pad locking arrangement in sheet steel enclosure of 400 Amps & including electric connections to the existing cables complete all as specified and directed. Make :- Cat Part No -E-CSCS400DM4CO or equivalent make & model in Havells/Scheinder/L&T.
S & F in replacement of LT heavy duty 4 pole ON load change over break switch, 415 volts, 50 Hz with handle assembly having door interlock and pad locking arrangement in sheet steel enclosure of 250 Amps & including electric connections to the esixting cables complete all as specified and directed. Make :- Cat Part No -E-CSCS250NM4CO or equivalent make & model in Havells/Scheinder/L&T.
S & F in renewal of 12X1.5 Sqmm PVC round sheated Multistrand Copper Conductor Control Cable for DG Set to AMF Panel complete all as specified and directed.
S & F in renewal of DC 12/24 Volt Self Solenoid Coil suitable for DG Set of Capacity 63 KVA to 500 KVA complete all as specified and directed.
S & F in renewal of DC 24 Volt On line Solenoid suitable for DG Set of Capacity 63 KVA to 500 KVA complete all as specified and directed.
S & F in renewal of DC 12 Volt Stop Solenoid suitable for DG Set of capacity 63 KVA to 500 KVA DG Set complete all as specified and directed.
M & L for repair / Overhauling of self starter & including replacement of carbon brushes, bearing, bushes, re-winding of armature with insulated copper wire winding of dia/size as per existing and field etc. and warnishing complete all as specified and directed for the following capacities :-
Capacity 12 Volts
Capacity 24 Volts
S & F in renewal of maintenance free battery of 12 volt DC, 150 Ah suitable for silent DG set complete all as specified and directed.
S & F in renewal of self charging maintenance free battery of 24 volt DC, 32 Ah suitable for silent DG set complete all as specified and directed.
S & F in renewal of kit liner as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of kit engine piston as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of pin piston as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of set, lower engine gasket as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of kit, upper engine gasket as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of gasket, gear cover as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of gasket, gear housing as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of B check kit, 6CTA as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of valvoline premium blue 7800 plus 1/20 ltrs as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of valvoline premium blue 7800 plus 1/10 ltrs as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of Inhibitor, corrosion 10 ltrs as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of main bearing set, (std) for engine as per existing & suitable for DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of bearing for connecting rod as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of set, gasket connection as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of Aftercooler as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of Core, cooler as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of pump water as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of switch magnetic as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of sensor-temperature as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of restriction indicator as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of V ribbed belt as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of exhaust valve as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of intake valve as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of insert valve as per existing & suitable for DG Set of capacity 100 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of spring valve as per existing & suitable for DG Set of capacity 62.5 KVA to 200 KVA complete all as specified and directed.
M & L for overhauling of engine of DG Set of capacity 160 KVA to 200 KVA complete all as specified and directed.
S & F in renewal of DG set control panel as per existing & suitable for DG Set of capacity 62.5 KVA to 200 KVA complete all as specified and directed.
LADDOS BUILDCON
L C ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .