Improvement of Water Supply and Sanitary Installation works of CHC Building, Gania under AMA Hospital

Major/ Minor repair including replacement of damaged internal water supply pipe line at CHC Building GANIA

All toilet renovation like Painting, floor tile, wall tile, doors, P.H. fixtures like tap, basin, pan, cistern, stop cock, shower, sink and other ancilliary item at CHC Building GANIA

Supplying all labour and T&P for dismantling of damaged basin, mirror, towel rail etc. all complete.

Supplying all labour & T&P for Dismantling squatting type water closet and urinal plates etc and mending good the damages to the floors etc.

Supplying all labour & T&P for Dismantling European or Anglo Indian water closet.

Supplying all labour & T&P for Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m

Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead.

I.P.D. First Floor

I.P.D. Ground Floor

Dismantling and removing wall tiles cladding from walls including racking out joints 12mm deep stacking the useful materials for within 50m lead.

I.P.D. First Floor

I.P.D. Ground Floor

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m

Supplying all labour T&P and earth work in excavation in all kinds of soil for foundation trenches within initial lead and fit including rough dressing and breaking clods to maximum 5 cm to 7 cm in size etc and laying in layers not exceeding 30cm in depth and as directed by Engineer -in charge.

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge.

Providing cement concrete (1:2:4) with 12mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. allcomplete as per specification and direction of Engineer-in-charge.

Cutting grooves in pacca floor and walls for taking pipes and making good the damagesm etc. all complete.

Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking pipes and fittings all complete as per specification.

Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:4) brick masonary in super structure

Supplying all labour T&P materials for 12mm thick cement plaster ( 1:6) etc. all complte required for the work.

I.P.D. First Floor

I.P.D. Ground Floor

Supplying all labour,T&P,materials for fittings, fixing of dados skirting & risers of size 600 mm x 600 mm of Valbon / Simpolo / R.A.K / Kajeria / Somany make ( premium quality) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete.

I.P.D. First Floor

I.P.D. Ground Floor

Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tile of size 600 mm x 600 mm of Valbon / Simpolo / R.A.K / Kajeria / Somany make ( premium quality) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete.

I.P.D. First Floor

I.P.D. Ground Floor

Supplying all materials, labour and T & P for Ezy grout (Ivory) color etc. complete as per dierection of E.I.C.

Supplying all labour T & P materials for Man mulia for Scraping old paint, Acrylic wall putty , Priming one coat with any approved primer & Wall painting 2 coats with Plastic Emulsion Paint etc all complete required for the work.

First Floor

Ground Floor

Providing fitting, fixing of Al. door with powder coated OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 3mm thick Aluminum Composite panel fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing with Structural adhessive (Silicone)including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 4095,4096 &9777,3994, as windows frame as shutter frame with 5mm thick glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.

Providing & fixing of Fixed vetilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6mm. Thick D quilty, galvanized as per IS-277 with Zinc of 120Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with plyster paint (black /pearl white/Choclate Brown ) of 12-16 microns along with alkyd backer at the back of 5-7 micron and the size of outer frame being of 46x52mm and with all vetrical & horizontal mullions ar of 46x70mm & fixed beading are of 18x25mm.Accessories /gasket are to be used as per the manufacture's,supply and specification like handle being made of high grade aluminium power coated with nylon reciver & gasket will be made of EPDM. All corner brackets are to made of CRCA with zinc phospeting. the mullian caps & louvered-clips should be of glass filled nylon. the section are to be cut to length,mitre jointed with corne bracket & frames are fixed to the concret/ masonary work by means of self excapading screws & glas to be used of 5mm refelective with all taxes & all complete.

Supplying all T & P, Providing fitting, fixing of stainless steel grill door/window made out of 12mm hollow squre bar as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Supplying all labour T & P materials for engagement of Manual Labour/Sweeper for cleaning of Bath Room, Toilet premisses, Over Head tank by using Kata Brush, Surf, Acid, Harpic etc all complete required for the work.

Unskilled Labour/Sweeper for cleaning of Toilets & Bathrooms

Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (soil, waste, rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.

110mm PVC SWR Pipe

110mm PVC SWR Door Bend

110mm PVC SWR Bend

110mm PVC SWR Tee

110mm PVC SWR Clip

110mm PVC SWR Coupler

110mm diaP.V.C. SWR offset bend

110 mm dia P.V.C. SWR Vent Cowl

110mm dia PVC SWR Single Y with door

Supplying all materials labour ,T&P and providing UPVC pipes Class IV(8 kgf/cm2 conforming to I.S 4985/2000, and pipe fittings of the following nominal bore with clamp including making good the ceiling and floor testing etc all complete as per direction of the E.I.C.

25mm UPVC Pipe

25mm UPVC Elbow

25mm UPVC Tee

25mm UPVC Socket

25mm UPVC Ball valve

25mm UPVC Union

25mm dia UPVC Clamp

25mmx20mm UPVC Reducer

25mmx25mmx20mm UPVC Tee

25mm dia UPVC Brass FTA

25mm dia UPVC Brass MTA

25mmx15mm UPVC Brass Elbow

25mmx25mmx15mm UPVC BrassTee

20mm UPVC Pipe

20mm UPVC Elbow

20mm UPVC Tee

20mm UPVC Socket

20mmx15mm UPVC Brass Elbow

20mmx20mmx15mm UPVC Brass Tee

20mm dia UPVC Brass FTA

20mm dia UPVC Brass MTA

20mm CPVC Pipe

20mm CPVC Tee

20mm CPVC Elbow

20mm CPVC Socket

20mm x 15mm CPVC Brass Elbow

20mm x 15mm CPVC Brass Tee

Supplying all labour, materials and T&P for fitting and fixing of the following CP and other kinds of PH fixturesof reputed make as per standard specification (CP-Jaquar or equivalent , Porcelain - Cera or equivalent

EWC set (single piece) CERA Capstain) Cat No. S1013138

23 " long Orissa Pan (OR) Calina S3010102 size - 580x440 mm with P Trap. (Cera).

10 ltr. Capacity low level cistern (Cera - Ciena Premium cat. No-B1010102 ) with anti bactrical knob.

24" x 18" x 10" Porcelain sink (Cera) Model No. 600 x 400 x 250mm) Cat No. S6010103

Concord W.Basin (630 x 450 x 205mm) wih full Pedestal (height-830mm) Cera- Cat-S2040112-W.Basin Cat-S2090107-Pedestal complete set.

C.P. waste. (32mm - Small)

32mm PVC Waste Pipe

24"x 18" x 10"STEEL sink single bowl(Mousumi )

Elbow Action Bib Cock with extended lever handle and wall flange (Jaquar - FLR-5043N)

15mm dia C.P. Pillar Cock long Neck with aerator (Jaquar - Cont. - 021KN)

15mmx600mm PVC connection pipe

C.P.grating

20 mm PVC Ball Cock with Rod & Ball (PTMT- Prayag).

15mm dia C.P.Angular stop cock with Wall flange (Jaquar - Cont.-059KN)

15mm CP Long Body Bib Cock with Wall Flange (Jaquar - CON-107KN)

20mm CP Concealed Stop Cock( Jaquar - CON-087FTK & ALD-089)

15mm dia CP Pillar Cock (Jaquar - CON-011KN)

Over head Shower ø140mm Round Shape Multi flow with air effect (ABS Body & face plate chrome plated) with Rubit Cleaning System (Jaquar - Cat. No - OHS-1769 )

C.P. Towl Rail of Size - 600 MM long (Jaquar - ACN-111SM )

CP Soap dish holder (Jaquar - ACN-1131N).

Decorative Mirror (CERA) CAT NO-B3510106.

C.P.Towel Ring Square (Jaquar - ACN-1121N)

15mm dia. CP Twin Bib Cock. (Jaquar - CON-041KN)

Allied Handshower (Health Faucet ) with 8mm dia, 1.2 meter long flexible tube & wall hook with N.R.V. (Back flow preventer) ( Jaquar ) ( ALD - 573)

C.P. Glass Shelf with glass (Jaquar) AKP-35771P

Wall mounted Grab Bar 600mm long Cat No-B2210106 (CERA)

Wall mounted Corner Grab Bar with 500 & 600mm long bars Cat No-B2210104 (CERA)

Wall mounted Rail (without hinge) 600x100mm Cat No-B2210102 (CERA)

Providing fitting and fixing of name plate with logo of male / female for gents & ladies toilets. ( Size - 18" x 10" )

Major/ Minor repair including replacement of damaged external water supply line including valves & fittings at CHC Building GANIA

Installation of roof top over head tank including piping arrangement at CHC Building GANIA.

Supplying all labour, materials and T&P for providing PVC tank ( four layer) of reputed make syntex/ supreme/ oriplast including transportation to work site etc. all complete.

1000 Litre tank

2000 Litre tank

Supplying all materiials, labour, and T&P for construction of staging for O.H Service tank ( PVC) on the existing roof of the building as per drawing specification and direction of EIC.

OH stagging -First Floor

OH stagging -Second Floor

Supplying all labour, materials and T&P for fitting and fixing of the following CP and other kinds of PH fixturesof reputed make as per standard specification, cost inclusive of cost of labour and materials for the works in all respect all complete as per direction of Engineer in charge.

50mm UPVC Pipe (Wall / Ceiling)

50mm UPVC Elbow

50mm UPVC Tee

50mm UPVC Socket

50mmx25mm UPVC Reducer

50mmx50mmx25mm UPVC Tee

50mm UPVC Ball valve

50mm UPVC Union

50 mm PVC Ball Cock with Rod & Ball

50mm UPVC Tank Nipple

Sinking 1 nos of 200mm size Production Well through DTH or Combination Drilling Rig near COVID Hospital at CHC Building GANIA

Supplying all labour, T&P for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated & unconsolidated rock with down the whole hammer drilling rig or combination rig as required to suit the site condition as per the direction of Engineer in charge including use of own rig with its accessories, tools & plants & consumables etc for lowering of 200mm dia PVC Pipes for housing fitted with socket and and with or without well screen as per the necessity for soft, medium, hard and boulder formation etc all complete as per the direction of Engineer in charge. (PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well)

Drilling of 200mm dia bore

Supplying all labour T&P for lowering of following size PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted and fixed up in perfectly vertical position including cutting & threading pipe and slotted pipe and supplying and fixing all jointing materials tools & plant etc complete & keeping the top of the casing pipe threaded including plugging tube well to prevent entry of foreign materials from above etc all complete as per the direction of Engineer in charge.

Lowering of 200mm PVC casing pipe

Suppling all labour T&P for cleaning and developing the bore well using their own compressor continously worked till clear & adequate discharge is obtained from the bore well including supply and use of all necessary equipments and labour etc all complete as per the direction of Engineer in charge.

Cost of 200mm dia ASTM-D-1785/2015 PVC (Sch-80) Pipe

Supplying all materials & labour and T & P for fitting fixing of following fittings for W/S pipe line etc. all complete .

50m dia MS Clamp

50mm dia SS Nipple

200mm dia Bore cover

S.S. Nut Bolt

Procurement of pump & motor, control panel & other electrical accessories including stand by for 200mm dia Production well at CHC Building GANIA

Supply of 1.0 HP vertical submersible pump motor with head 45-59 mtr .(KSB-CORA- 100 +( S)+UMT 3C / 05 +0.37 / 2 )

New Bore with standby.

Existing Bore at CHC Stand by.

Existing Bore at Admin Building Stand by.

Supplying all materials,labour and T&P for lowering of submersible pump set with 63mm dia Riser pipe inside the bore well as per direction of Engineer-in-charge.

Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum.

Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

Improvement of external sewerage disposal system Septic Tank & Soak Pit, Inspection Chamber, Man Hole Chamber, Gully Trap etc. at CHC Building GANIA

Construction of 50 users RCC Septic Tank

Supplying all mterial,labour T&P for earth work in excavation in foundation in all kinds of soil with initiallead and lift including fine dressing and leveling the bed etc all complete

Supplying all materials labour T&P and filling in foundn and plinth with sand well watered and rammed including cost carriage and royalty of materials etc complete.

Supplying all materials labour T&P and providing PCC(1:3:6) with 4 cm size HG metal including cost carriage,royalty of all materials to site etc all complete.

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth.

Supplying all materials labour T&P and providing RCC (1:11/2:3) with 12 mm size CB HG chips including cost carriage royalty of all materials including hoisting and laying etc complete. (Bottom portion)

Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismentaling them after casting including cost of all materials etc complete.

walls

Supplying all materials labour T&P and providing MS reinforcement for RCC work including cutting bending bindig and tying the grills and placing in position including cost and carriage of MS rod and binding wire 18 to 20 gauge etc complete.(Taking 1cum as1.0qtl)

Supplying all materials labour T&P and providing 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips for new work including cost,carriage and royalty of all materials etc complete.

Supplying all materials labour T&P and providing 12 mm thick cement plaster(1:4) over inside portion wall with cement punning.

Supplying all materials labour T&P and providing 16 mm thick cement plaster (1:6) over out side portion of wall.

Supplying all materials, labour, T&P and fitting fixing of S.F.R.C.M.H.Cover (heavy duty) over RCC roof slab

Supplying all materials labour T&P and filling with excavated earth in excavated trench including watering ramming etc. all complete.

Construction of 20 users Septic Tank Internal Size- 2.300x1.100x1.800m

Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.

1st Depth

2nd Depth

Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour

Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth

Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

12mm. Thick inside cement plaster (1:4) over brick work.

R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.

Supplying all labour T&P materials for 12mm. thick grading plaster (1:6) over concrete work (Roof top Ground Floor) etc all complete

(Renovation of existing Sewerage System)

Supplying all labour, T & P for cleaning and desludging of fully filled up MHC/IC including for removing the sludge and debrises from MHC by means of rope and G.I. bucket and stacking the sludge outside the MHC, dumping the same within 100m lead and carrying the same to out side by mechanical means etc all complete as per direction of E.I.C.

Supplying all labour T & P material for cleaning of PVC Sewer line by using Bamboo, Kata Rashi, Bucket etc. all complete required for the work. (Upto 250mm dia)

Supplying all materials & labour and T & P for engagment of manual labours for openning of slab cover including earth work and refixing after completion of the work.required for the work all complete

Supplying all labour for removing the sludge from septic tank by means of rope and G.I. bucket and stacking the sludge outside the tank making temporary earthen drain & sand packing arround the tank whereever necessary etc all complete as per direction of E.I.C.

Supplying all materilas, labour and T&P for construction of 1.20mt dia x 1.50mtr Dep soak - way pit with dry brick walling up to 2.70mtr height and 25cm thick Fly ash brick work with cement mortar ( 1:6) fpr 0.60mtr heoght of wall at top, cement plaster ( 1:3) inside and outside filled with dry brick khao of 50mm to 100mm size to a heifght of 2.70mtr from bottom, coverd by means of 125mm thick R.c.c perforated slab, 50mm thick SFRC cover including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.

Soak-way pit ( 1.20mtr dia x 1.50mtr)

Supplying all materials labour & T&P construction of brick masonary gully trap chambers earth work in excavation in all kinds of soils, 250mm thick fly ash brick work in CM (1:5) with fly ash bricks having crushing strenght not less than 75kg/cm2, 12mm thick cement plaster in CM ( 1:3) for both inside and outside of brick masonary work with neat cement punning on Top and inside surface area including bending and channelling work with C.C ( 1:2:4) with 12mm hard granite chips of requite quantity and then plasterung with C.M ( 1"3) over it and then smooth finish with neat cement punning including cost of SFRC cover slab etc. specification and direction of Enginner-in-charge

Gully Trap (250mmx250mmx675mm) With RCC cover

supplying all labour T&P and materials for constructiion of Inspection Chamber with Fly ash . brick in C.M.(1:5) up to 1.5m depth., Fly ash . brick in C.M.(1:5) beyond 1.5m depth.,12mm thk.C.P.in C.M.(1:3) for outside surface up to 1.5m depth.,12mm thk.C.P.in C.M.(1:3) for outside surface beyond 1.5m depth., 12mm thk.C.P.in C.M.(1:3) for inside surface with neat punning.,Cement concrete (1:2:4) for benching and chanelling,150mm thk RCC slab in C.C.(1:2:4)-,M.S.reinforcement @ 1.0 qntl/ cum, Rigid smooth centerimng and shuttering for RCC slab,including the fitting and fixing of same all complete. (S.F.R.C. Cover)

Construction of Inspection Chamber.(0.75x0.75x0.45)m

Supplying all materials, labour & T&P construction of brick masonry man hole chamber of internal size 0.90 mtr. Dia with 0.90m.deep including of fly ash brick work in C.M. (1:5) with fly ash bricks having crushing strength not less than 75kg/cm2 12 mm thick cement plaster in C.M.(1:3) for both inside and outside surface with neat cement punning to top and inside surface area including benching and channelling with C.C. (1:2:4) with 12mm C.B. H.G. chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth and neat finishing with cement punning inside fixing of S.F.R. polypropylene coated step iron of approved quality and quantity at a vertical and horizontal spacing of 0.30m R.C.C. cover slab of 150mm thickness in C.C.(1:2:4) in 12mm C.B.H.G. chips having manhole opening of requisite including fixing of RCC man hole cover Medium duty with frame including curing etc. all complete as per the approved drawing if any and direction of Engineer-in-charge.

Construction of Man Hole Chamber-(0.90mx0.90mx0.90m) with RCC Cover

Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of surrounding or encasing salt-glazed stoneware pipes of the following internal diameter including concrete for bedding and curing complete as per PH specification

TYPE- C 1 STANDARD BEDDING : 110 mm dia

TYPE- C 1 STANDARD BEDDING : 160 mm dia

Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.

Filling in foundation and plinth with sand including watering and ramming as directed by the Engineer-in-charge for 100 cum

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum

Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (soil, waste, rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.

110mm PVC SWR Pipe

110mm PVC SWR Door Bend

110mm PVC SWR Bend

110mm PVC SWR Tee

110mm PVC SWR Clip

110mm PVC SWR Cowl

110mm PVC SWR Coupler

160mm PVC SWR Pipe

160mm PVC SWR Door Bend

160mm PVC SWR Bend

160mm PVC SWR Tee

160mm PVC SWR Clip

160mm PVC SWR Cowl

160mm PVC SWR Coupler

Installtion of Hot and cold drinking water Machine at O.P.D. & indoor facilities and Provision for electric wiring, fitting fixing of exhaust fan at CHC Building GANIA

Installtion of Hot and cold drinking water Machine at O.P.D. & indoor facilities at CHC Building GANIA

Aquaguard cum purifier (with all Accessories) Model : (10 to 15 L RO+UV+TDS), Make - Eureka Forbes Limited / Any approved.

Supplying all material, labour, T & P and providing power supply to water purifier-cum-cooler point including necessary wiring, lighting arrangement with fitting of tube light complete fitting providing plug point, switch board etc. all complete as per direction of Engineer-in-charge.

Long Point

15/5 AMP Plug Point

Provision for electric wiring, fitting fixing of exhaust fan at CHC Building GANIA

Recessed/Surface sub main wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduit as required. (Make of wire: Finolex/Polycab/Havells).

2 x 2.5sq.mm +1 x 1.5 sq.mm

Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard)

Light Points

15A Plug Point

15A Switch Point.

16A Switch.

16A Socket.

Supply and fixing of 9 watt LED Bulb.

Supplying, fitting & fixing of Exhaust Fans

Supplying, fitting & fixing of S/F of 6 Ltr Capacity Geyser Machine Insta Prime

Please Enable Macros to View BoQ information