PERIODICAL SERVICES TO OTM BLDGS AND BOUNDARY DWARF WALL INCLUDING PAINTING OF HANGERS FOR TECH AREA CERTAIN BLDGS COMPOUND WALL AND REPAIR TO FLOOR WALL SANITARY FITTINGS JOINERIES ETC OF BUILDINGS AND HANGER IN F AND H AREAS AT NAVAL BASE UNDER GE

Amount

M&L for Preparation of old decorated surface of walls including cornices (Plastered or un-plastered) and applying one coat of white wash at any height of bldgs./store houses/hangars complete all as specified and directed by Engr-in- charge.

All as per item No.1 above but on ceiling complete all as specified and directed by Engr-in-charge

M&L for Preparation of old decorated surface of walls including cornices (Plastered or un-plastered) and applying one coat of colour wash at any height of bldgs./hangars all as specified and directed by Engr-in- charge

M&L for Preparation of old treated surface of wall and applying one coat of oil emulsion distemper all as specified and directed by Engr-in- charge

M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in- charge

M&L for preparation of old painted surface of wood or wooden based surface of any description n.exc. 10cm width or girth and applying one finishing coat of synthetic enamel paint all as specified and directed by Engr-in- charge

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in- charge

M&L for preparation of old painted steel surface of any description n.exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in- charge

M&L for preparation of old treated wooden surface exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and directed by Engr-in- charge

M&L for preparation of old treated wooden surface n.exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and directed by Engr-in- charge

M&L Applying one coat of cement base paint on old plastered surface including preparation of surface at any height of bldg./hangars/store houses all as specified and as directed by Engr-in- charge

M&L preparation of surface at any height of bldg./hangars/store houses by complete removal of old treatment and applying two coats of cement base paint including a coat chalk whitening all as specified and directed by Engr-in- charge

M&L preparation of surfaces at any storey of bldgs./hangars/ store houses and applying one coat of antifungal paint on existing surfaces all as specified and directed by Engr-in- charge

M&L complete removal of existing treatment at any storey of bldgs./hangars/store houses and Applying two coats of antifungal paint over a coat of primer includingall as specified and directed by Engr-in- charge. Note:- The work shall be carried out through athorised applacator of any one of themanufacturere listed hereinafter. Contractor shall submit 5 year guarantee from the certified date of completion of subject CA for the effectveness of painting.

M&L for preparation by washing, rubbing down and stopping of distemper and painted surfaces of wall and applying one coat of acrylic washable distemper at any storey complete all as directed by engr-in-charge

M&L for complete removal of existing treatment of wall and applying two coats of acrylic washable distemper over a coat of primer at any storey complete all as directed by engr-in-charge

M&L for preparation by washing, rubbing down and stopping of distemper and painted surfaces of ceiling and applying one coat of acrylic washable distemper at any storey complete all as directed by engr-in-charge

Taking down of existing roof treatment of any descriptions (brick,tiles,concrete) and removal of dismantled materials to a distance exc 500m and n exc 1 Km complete all as specified and directed

M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyester matt not less than 160 g/sqm, having softening point not less than 1400 C longitudinal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bituminous aluminium paint @ 100 g/sqm including demolition of cement concrete any description and in any position, complete all as in follows steps:- (a) 25mm thick PCC :2:4 type B0 as in padding finished even and smooth. (b) 10mm thick plaster in CM mortar1:4 with using WPC and finished even and smooth w/o using extra cement (c) Application of oil based bituminous primer @ 0.20 kg/sqm,. (d) Application of 85/25 conforming to IS : 702 @ 85/25 @ 1.20 Kg/sqm (e) Laying of 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm (f) Application of 85/25 conforming to IS : 702 @ 85/25 @ 1.20 Kg/sqm (g) Application of solar reflective bituminous aluminium paint @ 100 g/sqm

Dismantling wrought iron or mild steel work of any description not otherwise provided for complwte all as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut ton ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(Gde-E-250) quality-B all as specified and as directed

Dismantling Asbestos cement (corrugated or semi-corrugated) sheets roof/Wall covering any gauge thickness complete.

S&F pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed

S&F pre-painted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and as directed

S&F 6.3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each all as specified and as directed

M&L for preparation of new steel surface and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

Dismantling ceiling boards of any description, any thickness including cover fillets all as specified and as directed

S&F Powder coated Aluminium snap grid false ceiling on frame work of angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws for insulation and acoustic purposes, 60x60 cm in size including preparation of new ceiling surfaces and applying two coats of distemper oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

Demolition of concrete in ground floors and paving's n.exc 15 cm thick (below or above ground level)

M&L Providing, cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, beds etc

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete.

M&L Brushing neat cement slurry with 3.0Kg of cement per sqm

M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40mm gdaded stone aggregate as in sub base complete all as specified and as directed.

M&L for 40 mm thick cement concrete 1:2:4 type B1 20mm gde stone aggregate as in floor complete all as specified and as directed.

S&F in repairs 2 mm thick PVC tiles/ sheets laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed. .

Dismantling floor/hearth and wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick CM 1:4 screed bed or bedding layer of mortar all as specified and as directed.

All as per item No: 38 but skirting/dado over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. .

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick CM 1:4 screed bed or bedding layer of mortar all as specified and as directed.

M&L glazed coloured ceramic tiles in vertical surfaces 450 x300 x 7 mm thick set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over and including 10 mm thick rendering CM 1:4 complete all as specified and as directed. .

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth w/o using extra cement.

M&L for 3mm thick wall care putty on internal surfaces of walls all as specified and directed by Egnr in charge.

M&L for preparing new plastered wall surfaces and applying two coats of oil emulsion distemper over one coat of alkali resistant primer all as specified and as directed.

Demolition of brick work built in cement mortar, including all quine, arches, pillar etc all as specified and directed by the Engineer-in-Charge.

Material and labour for Brick work as in half brick thick walls with sub class ‘B’ bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:4 complete all as specified & directed.

Taking down door/windows with chowkats with shutters (without taking off shutters from the frame) area n.exc 1.5 Sqm each including cutting holes .

Taking down door/windows chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n exc 4 sqm each including cutting holes .

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 15mm dia fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repair 15mm dia fancy type chromium plated angle Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions .

S&F15mm Concussive push button taps of cast copper alloy, screwed for iron pipe .

S&F 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

All as per item No: 54 but 20 mm bore complete all as specified and as directed.

S&F CP Jet 15mm bore for EWC with flexible tube and required fittings complete all as specified and as directed.

S & F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.5 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F brass chromium plated bottle trap with inlet or outlet screwed for pipe for connection including necessary packing, union and cap (32 mm bore) complete all as specified and directed.

S& F for fixed in repair vitreous China urinals, bowl type size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe.

S&F Vitreous China wash basin, white, flat back, size 630x450mm including 15 mm bore CP Pillar cock with capstan head screwed high pressure with or W/O lettered hot or cold with long screwed shank and fly nuts and PVC connections 15mm size with PTMT nuts of length 600 mm, waste chain and plug and porcelain stopper but including brackets all as specified.

S&F vitreous China wash down water closet pan (pedestal pattern), white including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC10 litre valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm plain with CP grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings fixed to wall with clamps.

S&F PVC (SWR) bends 75 mm dia single socketed in any length , with rubber rings.

S&F PVC (SWR) pipes 110 mm dia vent cowl.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F Aluminium anodised chromium plated towel rail 20mm dia D type, 60cm long between flanges complete all as specified.

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm

S&F in repairs Chinaware partition for urinal of size 310x700mm all as specified.

Demolition by breaking up drain pipes (salt glazed stone ware/AC/ RCC) 110 mm dia jointed in cement mortar and taking out of trenches and removing debris incl concrete bed haunching from the site to a distance n.exc . 100 mtr all as specified and directed.

Excavation in trenches not exc 1.5M wide and not exc 1.5M depth for foundation , etc for shafts , wells , cess pits , man holes , etc 10 sqm on plan and getting out in loose soil. And getting out in soft/loose soil complete as specified and as directed by the Engineer-in-Charge

M&L for cement 1:3:6 type C2 using 40 mm graded stone aggregate as in concrete bed to drain pipes 110 mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in complete as specified and as directed by the Engineer-in-Charge

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed by the Engineer-in-Charge

Returning, filling in including spreading levelling watering and well ramming in layers not exc 25 cm thick(soft/loose soil)

Removal of excavated soil to a distance exc 50m and n.exc 100m and deposited at a level not exc 1.5M above the starting point all as directed by Engineer-in-charge

M&L providing silicon sealant for roof side glass of all side after cleaning surface etc

S&F in repairs 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete at any height of bldgs./store houses: GEAR OPERATED type with bevel gear box and crank handle type, complete (height up to 15m) all as specified and directed .

S&F in repairs powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each or, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F in repairs powder coated aluminium frame for doors, windows, ventilators, partitions, cubicles etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L in repairs Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handles etc. complete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,

S&F PVC rain water pipes 110mm dia including bend, elbow, iron brackets for fixing etc complete all as specified

Taking down shutter aluminium partition of any description exc 2 sqm and not exc 4 sqm each and , easing and adjusting ,cutting to proper shape and re-fixing same position and also refixing builders hardware as required including renewal of unserviceable screws etc complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F Powder coated aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no). hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed. Note:- Glass pane shall be measured and paid separately.

S&F for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,

S&F 35 mm thick second class hard wood rail and style for Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. dived into squares with plain chamfered or rounded mitred and rebated sash bars, any numbers, . fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);

S&F MS holdfast made out of Flat Iron 25mmx3mm, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20 mm grated stone aggregate as in copings, bed blocks for hold fast etc all as directed

S&F 100mm stainless steel butt hinges, medium wt cold rolled( Make: Crown / Jyothi / Argent )

S&F 100mm long Aluminium anodised barrel tower bolt( Make: Crown /Jyothi/ Argent )

S&F 150mm long Aluminium anodised barrel tower bolt( Make: Crown /Jyothi/ Argent )

M&L 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 125mm long Aluminium anodised handle ( Make: Crown / Jyothi / Argent )

S&F 150mm long Aluminium anodised handle ( Make: Crown / Jyothi / Argent )

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

T L ALOSIOUS

ANIE JOHN CONTRACTORS

Oriental Constructions