Ayojan

Name of Work :- Construction of Library with Solar, Furniture and Construction According

the Design in Lakhanaka Village Tal. Gadhada Dist. :- Botad

Bill of Quantities

Memorandum showing items of works to be carried out

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

1 138.500 Cum Excavation for foundation upto 1.5 m depth 122.93 Rupees One One

Hundred Twenty Cubic

including sorting out and stacking of useful materials

Two and Paise metre

and disposing off the excavated stuff upto ALL lead. Ninety Three only

2 72.500 Cum Excavation for foundation upto 1.5 m to 3.0 m depth 134.83 Rupees One One

Hundred Thirty Cubic

including sorting out and stacking of useful materials

Four and Paise metre

and disposing off the excavated stuff upto ALL lead. Eighty Three only

3 184.500 Cum Filling available excavated earth (Including rock in 136.92 Rupees One One

Hundred Thirty Cubic

trenches plinth, sides of foundations etc. in layers not

Six and Paise metre

exceeding 20 cm. in depth consolidating each Ninety Two only

deposited layer by ramming and watering)

4 38.000 Cum Providing & filling in plinth with murrum or yellow 301.77 Rupees Three One

Hundred One and Cubic

soil or selected soil in layers of 20 cm. Thickness.

Paise Seventy metre

Incl. watering, ramming & consolidation etc. Seven only

5 19.000 Cum Filling in plinth with sand under floors including 481.80 Rupees Four One

Hundred Eighty Cubic

watering ramming, consolidating and dressing

One and Paise metre

complete Eighty only

6 22.500 Cum Providing and laying cement concrete 1:2:4 (1- 3989.50 Rupees Three One

Thousand Nine Cubic

Cement : 2- coarse sand : 4- hand Machine crushed

Hundred Eighty metre

stone aggregates 40 mmnominal size) and curing Nine and Paise

complete including cost of formwork in (A) PCC Fifty only

7 17.000 Cum Providing and laying controlled cement concrete 4557.12 Rupees Four One

Thousand Five Cubic

M.250 and curing complete inculding the cost of

Hundred Fifty metre

formwork but Excluding the cost of reinforcement for Seven and Paise

reinforced concrete work in foundation, footings base Twelve only

of column and mass concrete. (A) Footing

8 6.000 Cum Providing and laying controlled cement concrete 8287.05 Rupees Eight One

Thousand Two Cubic

M.250 and curing complete inculding the cost of

Hundred Eighty metre

formwork but Excluding the cost of reinforcement for Seven and Paise

reinforced concrete work in All Types of Column D) Five only

Column, Pillers, posts and struts , upto Plinth

9 6.000 Cum Providing and laying controlled cement concrete 8260.65 Rupees Eight One

Thousand Two Cubic

M.200 and curing complete inculding the cost of

Hundred Sixty metre

formwork but Excluding the cost of reinforcement for and Paise Sixty

reinforced concrete work in All Types of Column D) Five only

Column, Pillers, posts and struts, upto All Floor

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

10 13.000 Cum Providing and laying controlled cement concrete 6502.38 Rupees Six One

Thousand Five Cubic

M.250 and curing complete inculding the cost of

Hundred Two and metre

formwork but Excluding the cost of the cost of Paise Thirty Eight

reinforcement for reinforced concrete work in Beams. only

(E) Beam, upto Plinth

11 9.000 Cum Providing and laying controlled cement concrete 6469.05 Rupees Six One

Thousand Four Cubic

M.200 and curing complete inculding the cost of

Hundred Sixty metre

formwork but Excluding the cost of reinforcement for Nine and Paise

reinforced concrete work in All Types of Beams,(E) Five only

Beam, Ground Floor

12 11.500 Cum Providing and laying controlled cement concrete 6426.63 Rupees Six One

Thousand Four Cubic

M.200 and curing complete inculding the cost of

Hundred Twenty metre

formwork but Excluding the cost of reinforcement for Six and Paise

reinforced concrete work in All Types of Slab,All Sixty Three only

Thickness (C) Slab upto Plinth and Ground Floor

13 1.500 Cum Providing and laying controlled cement concrete 6793.26 Rupees Six One

Thousand Seven Cubic

M.200 and curing complete inculding the cost of

Hundred Ninety metre

formwork but Excluding the cost of reinforcement for Three and Paise

reinforced concrete work in All Thickness in Walls Twenty Six only

PARDI Ground Floor

14 1.500 Cum Providing and laying controlled cement concrete 6012.53 Rupees Six One

M.200 and curing complete inculding the cost of

Twelve and Paise metre

formwork but Excluding the cost of reinforcement for Fifty Three only

reinforced concrete work in Lintel upto Ground Floor

15 1.000 Cum Providing and laying controlled cement concrete 5735.79 Rupees Five One

Thousand Seven Cubic

M.200 and curing complete inculding the cost of

Hundred Thirty metre

formwork but Excluding the cost of reinforcement for Five and Paise

reinforced concrete work in Chajja. Upto Ground Seventy Nine only

16 7999.000 Kg Providing and fixing TMT bars Fe-500D steel 78.33 Rupees One

Seventy Eight and Kilogram

reinforcement for R.C.C. work including binding,

Paise Thirty Three

bending and placing in position complete upto floor only

two level ,Ground Floor, First Floor , Second Floor,

Third Floor, Terrace Floor (all floor).

17 115.500 Sqm Applying general insecticide pest control treatment to 39.08 Rupees One

Thirty Nine and Squere

floors, cupboards etc including labour material etc.

Paise Eight only metre

complete. Using Heptachloride 20 EC. As Per

6113_pests Consentration Weight 0.50 percent is

recommended one litre chemical emulsion dillute

18 57.000 Cum Brick work using common brunt clay building bricks 4398.78 Rupees Four One

Thousand Three Cubic

having crushing strength not less than 35 kg/sqcm. in

Hundred Ninety metre

foundation and plinth in cement mortar 1:6 (1 cement Eight and Paise

:6 fine sand) etc.comp. (B) Conventional Upto Floor Seventy Eight only

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

19 9.000 Sqm Half brick masonry in common brunt clay building 684.26 Rupees Six One

Hundred Eighty Squere

bricks having crushing strength not less than

Four and Paise metre

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - Twenty Six only

coarse sand ) in (B) Conventional ALL Floor

20 230.500 Sqm Providing 15mm thick cement plaster in single coat 174.42 Rupees One One

Hundred Seventy Squere

on Rough (Similar)side of single or Full/half brick

Four and Paise metre

walls for interior plastering upto floor two level and Forty Two only

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) All Floor

21 132.000 Sqm Providing & laying10 mm. thick cement plaster in 155.34 Rupees One One

Hundred Fifty Squere

single coat on fair side of ceilings for interior

Five and Paise metre

plastering upto floor two level and finishing with Thirty Four only

smooth mala plaster.(i) Cement mortar 1:4 (1 cement

: 4 sand) ALL Floor

22 210.000 Sqm 20mm thick sand faced cement plaster on walls upto 342.41 Rupees Three One

Hundred Forty Squere

height 10 metres above ground level consisting of

Two and Paise metre

12mm thick backing coat of C.M. 1:3 (1-cement : 3- Forty One only

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. Upto ALL Floor to

23 46.000 Rm Providing throating or plaster drip and moulding to 43.04 Rupees Forty One

Three and Paise Running

R.C.C. Chhajja.

Four only metre

24 92.000 Rm Providing 20 mm deep finished groove in plaster in 30.30 Rupees One

Thirty and Paise Running

line and level etc. Comp. For all Floor

Thirty only metre

25 22.500 Sqm Providing and laying polished Granite Slab 18mm 2377.54 Rupees Two One

Thousand Three Squere

thick in Flooring laid 20mm thick Cement Mortar 1:4

Hundred Seventy metre

(1-Cement : 4-Coarse Sand) and jointed with Grey Seven and Paise

Cement Slurry including full molded round front Fifty Four only

edges , rubbing and polishing etc. complete.

26 18.000 Sqm Providing and laying polished Granite Slab 18mm 2408.85 Rupees Two One

Thousand Four Squere

thick in Risers of steps Dedo, window sill, jembs and

Hundred Eight metre

pillars laid 10 mm thick Cement Mortar 1:4 (1- and Paise Eighty

Cement : 4-Coarse Sand) and jointed with Grey Five only

Cement Slurry including full molded round edges

27 65.000 Sqm Providing and laying Vitrified tiles 8 to 10 mm thick , 1120.36 Rupees One One

Thousand One Squere

24'' x 24'' in flooring treads of steps and landing laid

Hundred Twenty metre

on a bed of 12mm thick cement mortar 1:3 (1-cement and Paise Thirty

: 3-coarse sand ) finishing with flush pointing in Six only

white cement.Soluble Salt PVT. Tiles in All Rooms.

28 38.000 Sqm Providing and laying Vitrified tiles 8 mm thick , 24'' 1195.02 Rupees One One

Thousand One Squere

x 24'' in skrting risers of steps and dedo on 10mm

Hundred Ninety metre

thick cement plaster 1:3 (1-cement : 3-coarse sand) Five and Paise

and jointed with white cement slurry Soluble Salt Two only

PVT. Tiles in All Rooms.

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

29 4.000 Sqm Providing and fixing 37 mm thick flush door both 3737.00 Rupees Three One

Thousand Seven Squere

sides laminated andshutter fabricated from 35 mm

Hundred Thirty metre

thick solid core malemine faced three layered pre Seven and Paise

bonded BWP/BWR synthetic resin having stamped IS

12823 grade (double door and single door)

30 4.500 Sqm Providing and fixing FRP frame size 125x65 mm and 2615.04 Rupees Two One

Thousand Six Squere

35mm thick FRP shutter having extra reinforcement

Hundred Fifteen metre

on sides & edges in polish finish. The core of the and Paise Four

shutter & frame is to be filed up with injected only

polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & alluminium S.S

fixtures & fastenings & fastener sleeve.

31 4.000 Sqm Providing and fixing window having extruded 1583.95 Rupees One One

Thousand Five Squere

aluminum Colour anodized section frame main outer

Hundred Eighty metre

size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , Three and Paise

horizontal Three track member size 92mm x Ninety Five only

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

32 2.500 Sqm Providing and fixing window having extruded 1713.69 Rupees One One

Thousand Seven Squere

aluminum Colour anodized section frame main outer

Hundred Thirteen metre

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, and Paise Sixty

horizontal two track member size 61.85 mm x 31.75 Nine only

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

33 1.000 Sqm Providing and fixing standared extruded of 1175.55 Rupees One One

Thousand One Squere

alluminium section of size 63mm x 38.10mm x

Hundred Seventy metre

1.2mm (Wt. 0.643 Kg/mt) with colour anodized Five and Paise

alluminium frame for ventilation with 5 mm thick Fifty Five only

frosted glass as details etc complete for Ventilation

34 127.000 Kg Providing and fixing M.S. grill of required pattern of 114.13 Rupees One One

Hundred Fourteen Kilogram

windows etc. with M.S.. flats at required spacing and

and Paise Thirteen

frame alround square or round headed bolts and nuts only

or by screws.including applying a priming coat of red

lead paint and two coats of oil painting

35 230.500 Sqm Applying two coats of Birla (white cement based) or 128.96 Rupees One One

Hundred Twenty Squere

(acrylic lapy- putty) or equivalent & two coats of

Eight and Paise metre

primer of approved brand and manufacture on new Ninety Six only

wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. with Wall painting (three coats) with plastic

emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

36 132.000 Sqm Applying two coats of Birla (white cement based) or 171.51 Rupees One One

Hundred Seventy Squere

(acrylic lapy- putty) or equivalent & two coats of

One and Paise metre

primer of approved brand and manufacture on new Fifty One only

Ceiling surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. Ceiling painting (three coats) with plastic

emulsion paint of approved brand and manufacture

on undecorated Ceiling surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

37 209.610 Sqm Finishing wall with weather proof exterior emulsion 166.65 Rupees One One

Hundred Sixty Six Squere

paint on wall surface (two coats) to give an required

and Paise Sixty metre

shape even shade after thoroughly brushing the Five only

surface to remove all dirt, and remains of loose

powdered materials.etc complete. Priming: Apply a

liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

38 85.500 Sqm Providing and laying integral cement based water 916.07 Rupees Nine One

Hundred Sixteen Squere

proofing treatment including preparation of surface

and Paise Seven metre

as required for treatment of roofs, balconies, terraces only

etc. consisting of following operations. (a) Applying

and grouting a slurry coat of neat cement u brick bats

is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth

finished with trowel with false chequered marking of

300 mm.size.The treatment is carried along

39 85.500 Sqm Providing and laying broken chine mosaic 779.69 Rupees Seven One

Hundred Seventy Squere

flooring for terrace using 12 mm to 20 mm broken

Nine and Paise metre

pieces of glazed tiles to be laid over cement mortar Sixty Nine only

1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using

40 12.000 Rm Providing and fixing Stainless Steel railing having 50 3101.71 Rupees Three One

Thousand One Running

mm dia hollow stainless steel pipe as hand rail and

Hundred One and metre

mm dia hollow stainless steel pipe with combination Paise Seventy One

of 10 cm long 16mm dia pipe as per virtical supports only

20 mm dia hollow stainless steel pipes H

41 2.000 No Providing and fixing wash down water closet 4327.52 Rupees Four One

Thousand Three Number

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Seven and Paise

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover Fifty Two only

to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour, Providing and

fixing 12.5 Litres low level flushing cistern with a

pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size

brass ball valve with polythene float, C.P brass

handle unions and couplings for connections, with

inlet, outlet and overflow pipes, 40mm dia.porcelain

enamelled flush bend including cutting holes in walls

and making good the same connecting the flush bend

with cistern and closet (overflow pipe to be measured

and paid for separately)(A) Vitreous China (I) In

white colour, Providing and fixing plastic seat and

cover for wash down water closer with C.P. brass

hinges and rubber buffers. (B) Black plastic seal and

cover, With Jet spray heavy duty with S.S. Braided

hose 60 cm long.

42 2.000 No Providing and fixing washbasin with single hole for 2363.15 Rupees Two One

Thousand Three Number

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the Three and Paise

Providing and fixing C.P. brass waste for washbasin Fifteen only

or sink. (A) 32mmdia.,Providing and fixing pillar

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

43 4.000 No Providing and fixing PVC SWR Nahni trap IS 14735 586.27 Rupees Five One

Hundred Eighty Number

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I Twenty Seven

scread down or hinged grating including the cost of only

cutting and making good the walls.

44 2.000 No Providing and fixing screw down bib taps of 186.82 Rupees One One

Hundred Eighty Number

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia. Eighty Two only

45 2.000 No Providing and fixing 600mm x 450mm bevelled edge 859.40 Rupees Eight One

Hundred Fifty Number

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge Forty only

with C.P. brass screws and washers.

46 2.000 No Providing and fixing Gun metal check or non-return 420.53 Rupees Four One

Hundred Twenty Number

fullway wheel valve. 25mm. dia.

and Paise Fifty

47 2.000 No Providing and fixing Gun metal check or non-return 663.42 Rupees Six One

Hundred Sixty Number

fullway wheel valve. 40mm. dia.

Three and Paise

48 2.000 No Providing and fixing chromium plated brass half turn 263.77 Rupees Two One

Hundred Sixty Number

flush cock of approved quality including fixing in

Three and Paise

pipe line etc. complete.(ii) 25mm dia. Seventy Seven

49 1.000 No Providing and fixing ball cock of approved. quality as 132.88 Rupees One One

Hundred Thirty Number

directed.(A) Copper Metal (A) 25mm. dia.

Eighty Eight only

50 8.000 Rm Providing laying and jointing in true line and level 72.64 Rupees One

Seventy Two and Running

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

Paise Sixty Four metre

including fittings as approved by Engineer In Charge. only

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

51 21.000 Rm Providing laying and jointing in true line and level 91.83 Rupees One

Ninety One and Running

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

Paise Eighty Three metre

including fittings as approved by Engineer In Charge. only

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

52 26.000 Rm Providing, laying and jointing in true line and level 876.90 Rupees Eight One

Hundred Seventy Running

110 diametre U.P.V.C (Type B) conforming to IS

Six and Paise metre

13592-1992 with one end plain and other end Ninety only

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x

149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

53 2.000 No Providing and fixing S.W. gully trap with C.I. grating 1246.91 Rupees One One

Thousand Two Number

brick masonry chamber and water tight C.I. cover

Hundred Forty Six

with frame of 300mm x 300mm size (inside) with and Paise Ninety

standard weight.(i) Square mouth traps.(B) 150mm x One only

100mm size P or R type

54 2.000 No Constructing Brick masonry road gully chamber 2017.19 Rupees Two One

Thousand Number

500mm x 450mm x 600mm including 500mm x

450mm C.I. horizontal grating wih frame complete. Paise Ninteen only

55 2.000 No Constructing brick masonry chamber for 2932.92 Rupees Two One

Thousand Nine Number

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than Two and Paise

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light Ninety Two only

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

56 10.000 Rm Providing laying (to level or slopes) and jointing 250.54 Rupees Two One

Hundred Fifty and Running

reinforced concrete Light duty non-pressure pipes

Paise Fifty Four metre

I.S. class NP2 of the following internal diameter with only

collars and butt ends prepared for collar joints

including testing of joints complete. (B) 150 mm d

57 10.000 Rm Providing laying (to level or slopes) and jointing 359.84 Rupees Three One

Hundred Fifty Running

reinforced concrete Light duty non-pressure pipes

Nine and Paise metre

I.S. class NP2 of the following internal diameter with Eighty Four only

collars and butt ends prepared for collar joints

including testing of joints complete.(C) 250 mm di

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

58 2.000 No Providing & fixing G.I. Rain water spout of 50 101.90 Rupees One One

Hundred One and Number

mm.dia & 30 cm length etc.

Paise Ninety only

59 2.000 No Providing and fixing in position cowel went to 505.17 Rupees Five One

Hundred Five and Number

pipes.(C) 100mm dia

Paise Seventeen

60 1000.000 Lit Providing erecting and fixing double coated PVC. 3.94 Rupees Three One Liter

and Paise Ninety

(ISI) water tank of required capacity each with all

necessary fittings and connection etc. complete on

61 1.000 No Providing & fixing & making Table LxBxH (1.20 x 14180.40 Rupees One

Fourteen Number

0.60 x 0.75) using Ply Wood ISI Brand Using IS

Plywood ( 8mm, 10mm, 12mm, 19mm, & 25mm) Hundred Eighty

Top with All side square top for superior quality table and Paise Forty

with thickness of 25 mm.All the outer & Inner only

surface cover by I.S.I. brand Sunmica of Formica

silicone ,bloom green or equivalent & inner 1.5mm

thick Laminate Sheet silicone or bloom or equivalent

Brand.using drawer channel of Hetich brand &

handle s.s. matt & drawer lock , including S.S Screws

, necessary hardware etc. complete including

necessary polish, hardware and labour etc. As per

attached drawing & instructed by in charge

Consultant. key board tray, CPU stand Ebaco Brand,

drawer cabinat,horizontal - vertical cable cover, LEG

62 1.000 No Providing and fixing of OFFICE CHAIRS of pvc 3989.50 Rupees Three One

Thousand Nine Number

base and armrest,40 density high mould foam in seat

and back,or mesh, pu upholstry,multi funtional Nine and Paise

mechenism, bifma class IV gas lift and p.a Fifty only

castors,REVOLVING chairs as per the specified

company of HOF, Feather light, Wipro, Godrej etc.as

per selection and complete the work satisfactorily as

per instruction of architect or Engineer-in charge

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

63 30.000 No Providing and placing of Study Chair With Extra 2666.40 Rupees Two One

Thousand Six Number

Support Of Pips Must Be required For Long Time

Hundred Sixty Six

Usage Chair Overall Size (approx): H-83 x W-52 x D- and Paise Forty

Material Description: Seat & Back: Seat & back

from hot mould plywood of minimum 12 mm

thickness of ergonomic design to avoid back pain.

Cushioning: PU foam having density of 40 kg for

back and 50kgs/m3 for seat. Average thickness of

foam not less than 50 mm + 10 mm Polly foam.

Tapestry: Minimum average weight required

400to490 gms per sq. mtr,with average weight of

grams per square meter ● Frame structure: 4 legs

type Frame and handle for arm rest from ERW prime

quality tube of 14 swg, reinforced at all bends for

static and impact load with cushioning effect

● Finishing: All steel parts will be epoxy polyester

powder coated to the thickness not less than

microns finish after 10 tank anti-rust treatment and B

grade phosphating (in house) & same will be

demonstrated to the Engineer incharge during pre-

dispatch Inspection.

● Product Shoud be Tested by approved BIFMA

standard laboratories confirming to ANSI/BIFMA X

5.1- 2002 Cl. No. 5,7,8,12,13,17 on functional

requirement. Certificets Should be submiting With

64 30.000 No Providing & Fixing single Modular Reading table 5767.10 Rupees Five One

Thousand Seven Number

Table Size 900 x 610 x 760 with 1370mm high

partition and extra shelf for bags Seven and Paise

Table top made with 19mm thick Semi water proof Ten only

plywood of ISO 303, with all sides border of 40 mm

thick in 19mm thick ply wood, single side seating

system , with extra book shelf above top , foot rest,

All outer surfaces are to be laminated with 1.0 mm

laminate and bottom of table are to be laminated with

0.80mm laminate sheet as approved by architect.

Including all necessary hardware & fittings such as

screw, buffer, bonding material etc.(Wall facing

modular reading tables) . all work must be done As

per Architect Drawing & Instructed By Site Engineer

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

65 30.000 Sqm Providing & Fixing WALL Storage Cupboard Table 2525.00 Rupees Two One

Thousand Five Squere

Size 2000 x 500 x 3000 with 5 self , 2 nos door

Hundred Twenty metre

mm plywood with 4 mm glass panal door, Storage Five and Paise

ISO 710, door sides border of 20 mm thick in teak

wood, All outer surfaces are to be laminated with

mm laminate and internal laminated with 0.80mm

laminate sheet as approved by architect. Including all

necessary hardware & fittings such as screw, buffer,

bonding material etc.all work must be done As per

Architect Drawing & Instructed By Site Engineer

66 26.000 Point Point wiring for Light / Bell with 2-1.5 sq.mm & 449.45 Rupees Four One Point

earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated Forty Five only

multistrand copper wires, in following type of pipe

to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories Cat- III

67 9.000 Point Point wiring for FAN with 2-1.5 sq.mm & earthwire 629.23 Rupees Six One Point

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper Twenty Three only

wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with

6A Modular type switch and hum free EME four or

more step type electronic fan regulator with

separately mounted and accessories with earth

continuity of following type erected on PVC /

Metallic box, single mounting base frame covered

with textured/metallic front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessoriesCat- III

68 6.000 Point Point wiring for Looped Plug with 6A Modular type 241.39 Rupees Two One Point

switch & 5 pin socket erected on PVC / Metallic box,

single mounting base frame covered with textured / Thirty Nine only

metallic front plate modules erected on / in wall /

ceiling with following type accessories Cat- III

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

69 3.000 Point Point wiring for individual Plug with & Earth wire of 473.69 Rupees Four One Point

Hundred Seventy

FRLS PVC insulated multistrand copper wires, in

Three and Paise

following type of pipe to be erected concealed in / Sixty Nine only

surface of wall/ceiling complete with Modular type

switch and 5 Pin plug erected on PVC/ Metallic box

covered with appropriate front plate modules erected

on / in wall/ ceiling as per pipe erected with

following type of

(I) For 6A Plug with 2-1.5 Sq.mm Cu. wire

(f) With medium class rigid PVC Pipe and

accessories - Cat_III

70 3.000 No Providing & erecting Switch board for Computer or 1081.71 Rupees One One

Thousand Eighty Number

electric apparatus consisting of following items in

single board erected on PVC / Metal board with 3 Seventy One only

mm thick PC (Polycarbonate) / Acrylic sheet erected

1 no. 6A/16A universal plug-switch combined.

4 nos. 6A Switch

4 nos. 6A 5 pin Plug

[B] For Modular Type Accessories Cat. III

71 1.000 No Decorative call bell Ting-tong box type 250 volts 68.68 Rupees Sixty One

Eight and Paise Number

complete erected

Sixty Eight only

72 21.000 No Supplying and erecting led lamps with following 188.87 Rupees One One

Hundred Eighty Number

wattage capacity of 220 to 240 voltage, minimum

Eight and Paise

15000 burning hours life, 500 V in built-surge Eighty Seven only

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable

LAMP holder (iii) 10 to 15 watts

73 3.000 No Miniature circuit breaker single pole 6A to 25A 112.11 Rupees One One

Hundred Twelve Number

suitable to operate on 240 V A.C. system and having

and Paise Eleven

breaking capacity 10 KA to be erected in existing only

box. confirming to IS 8828/1996 with ISI Mark

74 3.000 No Providing & erecting 240 V MCB double pole 295.93 Rupees Two One

Hundred Ninety Number

switch for lighting load (B Curve) having 10 KA

breaking capacity & Confirming to IS :8828 in Ninety Three only

Existing box , having capacity

(B) 40 Amp.- Cat-III

75 1.000 No Providing and erecting Sheet Steel powder coated 1492.78 Rupees One One

Thousand Four Number

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN Two and Paise

rail, confirming to IS 13032 and BS 5486-1986 Seventy Eight only

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of

MCB to be used)

(A) Single phase 12 way SS double door

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

76 9.000 No Providing & erecting Approved make Ceiling Fan 1596.81 Rupees One One

Thousand Five Number

with double ball bearing ISI mark with Condenser

230 volt A.C. 50 c/s, 1200 mm sweep complete Six and Paise

having 3blades with aluminium blades with , canopy Eighty One only

& 30 cms. down rod erected on existing hook or

Clamp with 24/ 0.2, 3 core flexible wire with

(Make shall be approved by Engineer in charge)

77 1.000 No Supplying & erecting approved make self-priming 7459.86 Rupees Seven One

Thousand Four Number

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply Nine and Paise

with metallic flange, and M.S. impeller delivery and Eighty Six only

following discharge (a) 40 LPM at 24 mtrs. head

suitable for 25mm dia. Delivery Cat-III

78 1.000 No Pipe type earthing having 150 cms.long and 2.5 cms. 540.35 Rupees Five One

Hundred Forty Number

dia. galvanised iron pipe with coupling and buch

and Paise Thirty

buried in specially prepared earth pit complete with Five only

necessary 8 SWG earth wire. For using salt and

charcoal / coke as required for pipe type earthing.

79 5.000 No Providing and Fixing LED Linear Hanging Profile 4040.00 Rupees Four One

Thousand Forty Number

Light 4Ft Length and 48W type.

80 2.000 No Providing & Fixing 4.50 Kg Co2 type Fire 5555.00 Rupees Five One

Thousand Five Number

Extinguisher with all required equipment & Labour

comp. Five and Paise

81 4.000 No Providing & Fixing 6.00 Kg ABC type Fire 2525.00 Rupees Two One

Thousand Five Number

Extinguisher with all required equipment & Labour

comp. Five and Paise

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

82 Supply, Installation, Testing & Commissioning of following size of

Grid Tied Solar Power Plant with Solar Panels (ALMM approved):

Frame Material : Anodized Aluminum alloy Frame With Twin Wall

Profile, Front Cover : High Transmission Low-Iron Tempered Glass

(AR Coated), High efficency and positive power tolerance Pmax:

0/+5, Module Efficiency should be approx. 19.5%-22%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 &

MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp.

co-efficient of the PV module shall equal or better than -

0.45%/degree C. Solar PV modules of minimum fill factor 75% to

be used. Unit Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty and 25 year

Linear Power Warranty includes all mechanical and electrical

parameters of the Solar panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to DC is

5:6 for the Installation capacity which are given in AC KW. Solar

Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m)

≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating

Tempreture Range: -25~60°C, Integrated protection of Inverter are

Anti-islanding Protection, Input Reverse Polarity Protection,

Insulation Resistor Detection, Ground fault protection, Residual

Current Monitoring Unit, Output Over Current Protection, Output

Short Circuit Protection, Output Over Voltage Protection, PV array

string fault Protection. Protection Degree: IP65, User Interface LCD

& APP, Datalogger & Communication: GPRS / Wi-Fi integrated,

Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting Structure: The

mounting (Rectangular pipe / square pipe / circular pipe) with

requisite cross bars, nuts and bolts, etc. shall be Hot deep

galvanized with minimum 80micron coating.

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

- 5.500 kW The Rectangular / square /circular hollow pipe section used 44936.92 Rupees Forty One Kilo

for the structure should have a minimum thickness of 2.0 Four Thousand Watt

mm. other than above, the material thickness should be Nine Hundred

minimum 2.5 mm. A certificate of a structural engineer Thirty Six and

Paise Ninety Two

certifying the strength and stability of the mounting

structure to withstand the weight and wind speed of

km/hour throughout the life span of 25 years of the system,

shall be submitted by the vendors. Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be

suitable for carry the load of solar panel,wiring, sprinkler

system etc. with necessary foundation work/wall mount, j

bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality.The ground clearance of

the bottom most edge of solar panel shall not be less than

300 mm to 1200 mm or as per site’s technical/feasibility

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the

CEIG drawing approval, lightining arrester system as per

the CEIG drawing approval, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG

is included in agency scope (Excluding All charges namely

GEDA Application fees, Solar connectivity Charges, Meter

connectivity Charges, Meter testing Charges and system

stability/strenthning charges.)(A) Grid Tied Solar Power

System: 1 - 6 kW (Single phase)

Item Quanties Item of work Estimated Rates Unit Total amount

Item Quanties Item of work Estimated Rates Unit Total amount

No. Estimated but according to

may be more or In Figure In Words. estimated

less. quantieis.

83 5.500 kW Providing & erecting Automatic solar panel cleaning 3423.90 Rupees Three One Kilo

Thousand Four Watt

system for solar power projects which includes

necessary plumbing work (UPVC pipes and Three and Paise

accessories) from source of water to project site (upto Ninety only

30 meters),Suitable size of sub mercible/ open well

motor, necessary wiring for motor and sprinkler

system with safety, timer circuit for automatically

on/off the sprinkler system, necessary size oand

number of nozzles/JET (minimum 1 Nozzle/Jet per

Dismentled Material Credit Rs. 0 will be

deducted from 1 St R.A. Bill

Rupees Twenty Nine Lakh Twenty Thousand Two Hundred Sixty Six and Paise Eighty Total

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow

percent ( Should be written in figures and words ) of the estimated rate mentioned above.

Amount of My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R.& B. Sub Division ( D P ) Road & Building Division