Sanitary and plumbing work in BHEL Township, Haridwar

Carriage of materials by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish, earth, manure or sludge and excavated rocks:: Lime, moorum, building rubbish:1 km

Excavating trenches of required width for pipes, cables etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 M including getting out the excavated soil, and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 M. All kind of soil. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. (S.I. No. 2.10.1.2/69)

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil: All kinds of soil.

Demolishing cement concrete including disposal of material with in 50 M lead 1:3:6 or richer mix (S.I. No. 15.2.1/167).

Dismantling of flushing cistern of any size including stacking useful material near the site and disposal of unserviceable material within 50 M (S.I. No. 15.52/172

Providing and fixing 10 ltrs. Capacity white P.V.C. low level flushing cistern with manually controlles device(handle lever) conforming to IS:7231,Parry ware/Hind ware/Seabird/Orient(Coral) with all fittings and fixture complete.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.:10 litre (full flush) capacity-white Unit:

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Parryware/Hindware/Seabird/Orient (Coral) complete:White solid plastic seat with lid Unit:

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe :32 mm dia Unit:each

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Flexible pipe:40 mm dia Unit:each

Providing and fixing toilet paper holder:C.P. brass Unit:each

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality, colour and make, weighing not less than 300gms (Prayag or equivalent) . Unit:each

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):15mm dia. nominal bore Unit:metre

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work):20mm dia. nominal bore Unit:metre

Providing and fixing brass stop cock of approved quality:15 mm nominal bore Unit:each

Providing and fixing brass stop cock of approved quality:20 mm nominal bore Unit:each

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore Unit:each

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15 mm nominal bore Unit:each

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931a) 15 mm nominal bore Unit:each

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931a) 15 mm nominal bore Unit:each

Providing and fixing C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg a) 15 mm nominal bore of standard back type Unit:each

Providing and fixing PTMT (An Engineering thermoplastic) bib cock of approved quality colour and make (Prayag or equivalent):15 mm nominal size, 122 mm long, 110 mm high and 43 mm wide with 12 mm seat dia. and replaceable washers, weighing not less than 105 gms. Unit:each

Providing and fixing PTMT (An Engineering thermoplastic) pillar cock of approved quality colour and make (Prayag or equivalent)15mm nominal size, 107mm long, 131mm high and 43mm wide with 12mm seat dia and replaceable washers, weighing not less than 115gms

Providing and fixing PTMT (An Engineeing thermoplastic) grating of approved quality, colour and make (Prayag or equivalent): Circular type:125 mm nominal dia., 15 mm high domed shape conforming to I.S. standards and weighing not less than 40 gms. Unit:each

Providing anf fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag or equivalent):15 mm nominal size, 110 mm long, 70 mm high and 40 mm wide with piston travel of minimum 5mm, having weight not less than 142gms, (62+25+55) (Body+Rod+Ball). Provided with leverage of minimum 230 mm and one piece moulded H.D.plastic ball of 114 mm dia. Unit:each`

Providing anf fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag or equivalent):20 mm nominal size, 125 mm long, 77 mm high and 42 mm wide with piston travel of minimum 6.5 mm, having weight not less than 210gms, (100+40+70) (Body+Rod+Ball). Provided with leverage of minimum 310 mm and one piece moulded H.D. plastic ball of 127mm dia. Unit:each

Providing and fixing PTMT swivelling shower, 15 mm nominal size, 95 mm long, 65 mm dia.of approved quality colour and make weghing not less than 40gms with approximate 80 holes of 1.2 mm dia (Prayag or equivalent). Unit:each

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into munic­ipal dumps::100 mm diameter Unit:metre

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Worked Out Items(DSR-2012) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(S.I.No.2.25/75).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate (DSR -2012, S.I. No. 11.3.1/187).

Providing and fixing white vitreous china flat back half stall urinal of 580x380x350mm with white PVC automatic flushing cistern, Parryware/Hindware/Seabird/Orient (Coral) with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.( DSR-2012 S.I.No. : 17.5.1/288)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x460 mm bowl depth 200 mm. S.I. 17.10.2.2

P/F white vitreous china pedestal type (Indian type) water closet pan

P/F white vitreous china pedestal type (European type / wash down type) water closet pan

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. Unit:each

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: :Flat back wash basin of size 550x400mm. Unit:each

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (S.I.17.69.1)

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms each 109.45 (S.I.17.69.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. :15 mm nominal outer dia .Pipes. Unit:m ( S.l.No. : 18.8.1) Page No.: 313

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. :20 mm nominal outer dia .Pipes. Unit:m ( S.l.No. : 18.8.2) Page No.: 313

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work :15 mm nominal outer dia .Pipes. Unit:m ( S.l.No. : 18.9.1) Page No.: 313

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work :20 mm nominal outer dia .Pipes. Unit:m ( S.l.No. : 18.9.2) Page No.: 313

P/F G.I. pipe complete with GI fitting and clamps, including cutting and making good the walls etc. (internal work) 15 mm nominal bore. (DSR-2012 S.I. No. 18.10.1/314).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc. (internal work): Exposed on wall:20mm dia. nominal bore Unit:metre

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : :15 mm nominal bore Unit:No. ( S.l.No. : 18.18.1) Page No.: 315

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : :20 mm nominal bore Unit:No. ( S.l.No. : 18.18.2) Page No.: 315

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.:With F.P.S. bricks Unit:each

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (S.I.No. 18.48/321

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. (S.I.No.18.74.2)

Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2: 100 x 100 mm size P type:With F.P.S. Bricks class designation 75 Unit:each

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:: Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg):With F.P.S. bricks with class designation 75 Unit:each

Extra for depth for manholes: Size 90x80cm:With F.P.S. bricks class designation 75 Unit:metre

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

Worked Out Items (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing & fixing PVC Nahani trap (Floor trap) of 100mm inlet and 75mm outlet as per direction of Engineer in charge.

Providing & fixing PVC long bend as per direction of Engineer in charge.

Providing & fixing PVC Tee of 110X110X110 as per direction of Engineer In-charge .

Providing & fixing PVC Tee of 75X75X75 as per direction of Engineer In-charge.

Providing & fixing PVC Coller of 110mm as per direction of Engineer In-charge.

Providing & fixing PVC Coller of 75mm as per direction of Engineer In-charge.

Providing & fixing PVC Bend of 110mm as per direction of Engineer In-charge.

Providing & fixing PVC Bend of 75mm as per direction of Engineer In-charge.

Providing & fixing PVC shoe Bend of 110mm as per direction of Engineer In-charge.

Providing & fixing MS Clamp for 75mm pipe as per direction of Engineer In-charge.

Providing & fixing MS Clamp for 110mm pipe as per direction of Engineer In-charge.

Providing & fixing PVC Pipe 100mm (Make VECTUS or Equivalent) as per direction of Engineer In-charge.

Providing & fixing PVC Pipe 75mm (Make VECTUS or Equivalent) as per direction of Engineer In-charge.

Checking and repairing of seepage & leakage in BHEL Township residential and non residential buildings either through floor trap, WC seat / trap bend, tee etc. or any other source. The work may include dismantling of brick work bath room floor, WC floor, taking out WC seat carefully and repairing the same including all T & P labour etc. and disposal of the dismantled material. Any fitting required to be replaced shall be paid separately under their respective items. All the material required viz. Cement, sand, shingle etc. will be issued by the department free of cost at maint. store. The work is to be carried out as per entire satisfaction of Engineer I/C.

Removal of chokage in WC, Bath / Kitchen, wash basin, pipe line upto house man hole. The contractor has to quote the rate for per quarter per complaint including supply of all labour, T & P etc. required for proper completion of work.

Replacing of WC seat including dismantling of CC taking out old WC seat, fixing the WC seat including repairing of floors, walls, flush pipe, labour, T & P etc. (All the material required viz. Cement, sand, shingle, WC seat etc. will be issued by the deptt. free of cost at maint store). The work is to be carried out as per direction of Engineer I/C.

Labour rate for steel work in single section fixed without connecting plates including cutting, hoisting, fixing in position and applying a primer coat, in tees, angles and channels, (only steel will be issued free of cost at BHEL store).

Providing & fixing PVC P-trap (self cleaning design) of 100mm inlet and 100mm outlet as per direction of Engineer in charge.

Please Enable Macros to View BoQ information