submersible motors

Supply and Transportation of 1.00HP 15 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon - ELEC5.6.1

Supply and Transportation of 1.50HP 21 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon - ELEC5.6.1

Supply and Transportation of 2.00HP 25 Stage -- single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon - ELEC5.6.1

Supply and Transportation of star rated 3.00 HP 5-10 StageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon

Supply and Transportation of star rated 5.00 HP 12-16 Stage Three phase ISI submersible motor pumpset suitable for 6" Bore well.Makes: Texmo / CRI / KSB /Aryenvarsha / Lubi / Falcon ELEC5.7.1

Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With Sheet Steel enclouser comprising of contactor with bi-metalic relay with neceSheet Steelary push buttons, etc., complete suitable ------ Makes: Siemens / LK / BCH ELEC5.5.1 Upto 3.0 HP.(Starter for Motor)

Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With Sheet Steel enclouser comprising of contactor with bi-metalic relay with neceSheet Steelary push buttons, etc., complete suitable ------ Makes: Siemens / LK / BCH ELEC5.5.1 Upto 7.5 HP.(Starter for Motor)

Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc., complete. ELEC5.11.1 Control panel Board

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.ELEC5.11.2

Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab ELEC1.6.3

Supply of 3 Core 2.5 Sqmm- Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab ELEC1.6.3

Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab ELEC1.6.3

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete.(Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) SSR Pg No.613 OD 32 mm 16.0 kg/sqcm

Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab ELEC1.6.2

Supply, Transportation and fixing of 50mm dia 90 °C bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc.,complete ELEC5.15.3

Supply, Transportation and fixing of 50mm dia MS flanges set (2 Nos) 150mm dia OD, 12mm thick each flange with required dia bolts and nuts including cost and conveyance of all materials, taxes etc., complete ELEC5.15.4

Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 32 mm NB Size TBSP-G.III-12

Supply, Transportation and fixing of 40 mm 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts. ELEC5.15.6

Supply, Transportation and fixing of 150 mm dia galvanised bore cover ELEC5.15.6