D-42/456/2022-Dehradun Circle

Amount

OW to Development of Toilet Block and drinking water facilities at Shiv Temple Lakhamandal, District Dehradun.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement Mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Ply wood 7 ply, 9 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineering-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Painting with synthetic enamal paint of approved brand and manufacture of required colour to give an even shade two or more coats.

Painting with synthetic enamal paint of approved brand and manufacture of required colour to give an even shade two or more coats.

8 Modular box [EACH]

4 Modular box [EACH]

Wire 1.50 mm [EACH]

Wire 1 mm [EACH]

Wire 3/4 mm [EACH]

M.C.B box double door 12 way [EACH]

M.C.B 16 [EACH]

Isolator 63 amp [EACH]

Ceiling Fan 48"(with ISI mark ) [EACH]

Exhaust fan(with ISI mark ) [EACH]

Regulator [EACH]

LED tube light set 18 watt [EACH]

LED bulb [EACH]

Consealed light 8 watt [EACH]

Holder [EACH]

Ceiling rose [EACH]

Round Sheet [EACH]

Switch 6 amp [EACH]

Socket 6 Amp [EACH]

Power Switch 15 amp [EACH]

Power Socket 15 amp [EACH]

Sheet 8 modular [EACH]

Sheet 8 modular [EACH]

Electrician [EACH]

Beldar [EACH]

Provision for sanitary items and water supply fittings in the toilet block with material and labour etc complete (all Items with ISI mark ) rate including GST [EACH]

W.C with all fittings [EACH]

Squatting pan with all fittings [EACH]

Washbasin with pedestal and all fittings [EACH]

Urinal bowl with all fitting [EACH]

Cistern [EACH]

Bib cock(tap) [EACH]

pillar tap [EACH]

Angle valve (tap) [EACH]

2in 1 wall mixer [EACH]

Water tank (1000 ltr) [EACH]

Tank connecter [EACH]

Union [EACH]

Ball valve [EACH]

Nani trap [EACH]

floor trap [EACH]

stainless steel jali [EACH]

towel ring [EACH]

Shop holder [EACH]

Toilet paper holder [EACH]

Health faucets [EACH]

Corner shelf [EACH]

Mirrer [EACH]

CPVC Pipe (3/4 inch, 3 m length ) [EACH]

CPVC Pipe ( 1 inch, 3 m length ) [EACH]

Elbow plane (3/4 inch) [EACH]

Elbow plane (1 inch) [EACH]

T plane (3/4 inch) [EACH]

T plane (1 inch) [EACH]

Socket(3/4 inch) [EACH]

Socket(1 inch) [EACH]

Teflon tape for plumbing pipe fitting [EACH]

CPVC end plug [EACH]

Elbow brass [EACH]

T brass [EACH]

PVC pipe 4 inch [EACH]

Elbow 4 inch [EACH]

T (4 inch) [EACH]

Socket, 4 inch [EACH]

solvent [EACH]

plumber [EACH]

beldar [EACH]

M/S DALJIT SINGH

Parveen Kumar Contractor