27/EDC(H)/2024-25

Amount

Safe carriage, loading-unloading with proper stacking of following material from store centre Hardoi to pit site/JE dump store.

PCC Pole of size 8.5 mtr long

ST pole 11 mtr. Long.

Stay Set Complete

11 & 33 KV Pin with Net

Disc insulator With fitting (B&S) 70KN

MS Earthing Rod (2540x20 mm) With Fitting

ACSR Weasel Conductor

GI Wire

11 KV XLPE cable of size 3x70 sq mm.

11 KV XLPE cable of size (3X120, 3x185, 3X300 sq mm)

LT XLPE Cable Aluminium 3.5×240mm²

LT XLPE Cable Aluminium 3.5×400mm²

LT XLPE Cable Aluminium 1x240mm²

LT XLPE Cable Aluminium 1×400mm²

Dog/Rabbit conductor

ABC (1X16+1X25)Sq mm

ABC (3X50+1X35+1X16)Sq mm

ABC (3X95+1X70+1X16 Sq mm)

ABC (3X120+1X95+1X16 Sq mm)

Cable box (3X70/3X120/3X185/3X300) Indoor & Outdoor

Replacement of Broken PCC single Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories.

Replacement of Broken PCC double Pole and Erection of PCC Pole 8.5 mtr long with Grouting & with all accessories

Replacement of Broken ST single Pole & Erection of ST Pole 11 mtr long with Grouting & with all accessories.

Replacement of Broken ST double Pole & Erection of ST Pole 11 mtr long with Grouting & with all accessories.

Re-Stringing of three phase ACSR Weasel Conductor for 11 KV line

Tilted of PCC/ST Pole

Rebinding of Stay Set

Laying of 11KV 3x70 sqmm single XLPE cable by digging of trench size 500 mm wide 900 mm after laying of brick, sand and stone slab. (Brick, sand and stone shall be provided by contractor)

Laying of 11KV (3X120, 3X185, 3X300 sq mm) single XLPE cable by digging of trench size 500 mm wide 900 mm after laying of brick, sand and stone slab. (Brick, sand and stone shall be provided by contractor)

Cable hoisting of 11 XLPE Cable on double pole (3X70, 3X120, 3X185, sq mm) including jumping etc. complete with help of GI Pipe as per RESPO Norms. (All the Material arrange by the contractor at his own cost)

Installation of Cable box11 KV Indoor & Outdoor

Installation of 33 KV Cable box Indoor & Outdoor

Stringing & Sagging of LT XLPE Cable Aluminium 1 * 400m * m ^ 2

Stringing & Sagging of LT XLPE Cable Aluminium 3.5 * 400m * m ^ 2

Stringing & Sagging of LT XLPE cable (1 * 240) sq.mm.

Stringing & Sagging of LT XLPE cable (3.5*240) sq.mm.

Stringing & Sagging ABC (1X16+1X25)Sq mm

Stringing & Sagging ABC (3 * 50 + 1 * 35 + 1 * 16) Sq mm

Stringing & Sagging ABC ( 3 * 95 + 1 * 70 + 1 * 16

Stringing & Sagging ABC ( 3 * 120 + 1 * 95 + 1 * 16

Placement of 11/0.4 KV T/Fs with the help of crane sleepers and man power etc, from dump place to newly constructed T/Fs plinth & erection & commissioning of 250/400/630 KVA T/Fs of T/F Plinth and including jumping with the system (All the required martial for above work shall be provided by 9500 contractor except T/Fs)

Fabrication erection and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories All material except 25/16/10 KVA T/F shall be supplied by the contractor

Construction of retaining wall, fabrication & erection of Wire mesh fencing of size 3+38 20 M height around Transformer and Distribution Pillar Box with retaining wall & 1 no gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts The panel must be supported with MS Flat of size 50x6 mm. Wire mesh of size 10 SWG rectangle type as per norms of RESSPO (All the material will be arranged by the contractor at his own. cost)

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1.5.10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr high & 0.35 mir wall will be constructed ratio wall should be 0.23 mtr thick brick work in ratio 1.4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimetre below from the top of wall. Cement, sand & brick Ballasts should be filled up to 15 centimetre Two no of channel 100x50 in length 1500mm will be grounded 0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4 The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor at his own cost)

Erection of Stay Set Complete.

Fixing of Ordinary Earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule.

Stringing of ACSR Weasel Conductor for 11 KV line

Stringing of Dog/Rabbit conductor for 33 KV line

Guarding of 33 KV Line

Looping & chopping of tree branches for clearance of H'T/LT line after clearance of line throughout pieces of tree branches of site (Approx 3

Neeraj Electricals

M/S RAJIV KUMAR SINGH