Conversion of signature park

Amount

SEZ 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

15.19 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

OD31681/2025-2026 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 1km lead as per direction of Engineer-in-Charge.

16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking ofserviceable material within 50 metre lead as per direction of Engineer-in-Charge.

OD24647/2025-2026 Dismantling and stacking of pole/ street light standared/strut embedded in cement concrete in foundation.Rates include costof labour,supervision machineries and Lead upto 1 km.

2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked -All kinds of soil

OD24651/2025-2026 Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable30.50 % concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building,etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experienced persons shall be employed for this purpose.)

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

OD27392/2025-2026 Providing & Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is not payable or recoverable separately. All work upto plinth level

5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is not payable or recoverable separately.All works above Plinth level upto floor V level.

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5 Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 below plinth l thickness 20 cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.The Frame shall be fixed to FRP Wall as per drawing.

9.122.2 Providing and fixing to existing door frame .30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

OD24698/2025-2026 Providing material and labour for fixing Zinc material indicator bolt of approved make for toilet door with Thumb Turn inside &amp, Emergency Release &amp, Indicator Outside with necessary screws etc complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

9.77 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

10.16.3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainlesssteel nuts and bolts complete, i/c fixing the railing with necessary accessories& stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as perapproval of Engineer-in-charge, (for payment purpose only weight of stainlesssteel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.)

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile- 600 x 600 mm.

11.41.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile - 800 x 800 mm

OD28730/2025-2026 Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all completeas per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with cement slurry and pointing with white cement slurry admixed withpigment of matching shade including rubbing, curing and polishing etc. allcomplete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

OD24707/2025-2026 Providing and laying, Exterior grade IPE wooden deck flooring in 20mm X 90mm X Random length sized planks with shearing strength of 144/kg/cm² , Density (Air Dry)994 kg/cm³ laid in approved pattern and in required position on base frame work made out of aluminium frame of 25mm x50mm size drilling & fixing to the floor base using screws with rawl plug or any other approved fixing arrangements.

22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

OD25587/2025-2026 Spray Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on FRP surface : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactur

OD25588/2025-2026 Supply and fixing of Exterior Polyvinyl ceiling of panel sizes of 250mmx 2950mm or nearest and 1.2 mm thickness, durable and resistant to moisture, water and borer-fungus-termite attack complies with IS 875 part 3 1987 on wind loading, the same should be tested for and complying to a wind Ioad resistance of minimum 1.2 kpa (as tested by an independent and competent authority) as per prevalent and in practice wind loading norms and procedures. Panels to be installed with GI sections of suitable gauge as per the installation of planks & size according to site conditions . Panels with suitable trims for edge profiles, Connecting profiles, starter and ventilation profile, exterior corner profiles shall be used . Panels must be maintenance free , rust proof and are 100% Water proof. 10 years warranty for colour & finish of the panels.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, etc as directed by the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years in a non -judicial stamp paper from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

OD27555/2025-2026 Providing and fixing pergola glass of 12mm thickness, SGG CLEAR COSMOS (ET 125) heat soaked toughened glass, as per the approved design and specifications. The glass shall be high-quality and fully toughened to ensure strength and durability, with all edges polished and protected. Installation involves securely fixing the glass panels into the framework using appropriate hardware and methods to ensure stability and proper alignment. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved make. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The framework shall be measured under relevant items.

OD27568/2025-2026 Providing and fixing framework using 12mm thickness heat soaked toughened glass , as per the approved design and specifications. The glass shall be high-quality and fully toughened to ensure strength and durability, with all edges polished and protected. Installation involves securely fixing the glass panels into the framework using appropriate hardware and methods to ensure stability and proper alignment. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved make. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The framework shall be measured under relevant items.

OD25597/2025-2026 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. A) 3.50 mm thick flat Sheets

12.51.6 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : A ) Gutter (600 mm over all girth)

OD28237/2025-2026 Providing and fixing in postion FRP Bench Length with Planter Box of 520cm, 50 cm width, 36 cm height with back support for a height of 68 cm and width 21 cm.The end support is 44 cm height and 12 cm width . The back support shall be provided with planter box of inside width 30 cm and depth of 25 cm through out lengthThe bench shall be prepared as per approved drawing and as per the direction of E.I.C The cost is including necessary frame work. etc complete.(Type-I)The Bench shall be made of FRP 11 to 12 mm thickness ( 1000kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness.

OD25620/2025-2026 Providing and fixing 50mm thick Glass Fibre Reinforced Plastic (FRP) partition with 2.7 mm thick panels on either side with infill of polyurethane foam (PUF) / Polystyrene foam as filler material throughout the panel, to be casted monolithically with testing parameters of F.R.P complete as per direction of Engineer-in-charge. The partition shall be fixed to the framework as per drawing specification. The rate is inclusive of the cost and conveyance of all fixing accessories, and installation cost. etc complete. The framework shall be measured under relevant item.

OD25623/2025-2026 Providing, Fabricating, and erecting in-position FRP Bus Shelter as per the architectural design and drawing. FRP Planter boxes on both sides of sizes 1850 mm length x 2300 mm width x 1500 mm height along with seating shall be provided as per design. The inside (rear side) planter box dimensions are 2500 mm length x 520 mm width x (1200 mm,1050mm and 900mm) height and 900 mm length x 520mm width x 750 mm height respectively. The seating shall be made of FRP panels of 50 mm thickness of approved design and pattern. Both FRP seating and planter boxes shall be supported on the framework with necessary hardware fittings as per the drawing. WPC (Wood Polymer Composite) Fluted Panels has to be fixed to the frameowrk with the necess.ary hardware fixtures as per design. The MS framework, flooring works and roofing works shall be paid seperatedly under relevant item. The rate is inclusive of cost and conveyance of all fixing accessories, installation, labour etc complete

OD25626/2025-2026 Supplying, laying machine cut, surface grinded, levelled and rough granite cobble stone varying size and thickness 6cm to 8cm laid in stone chipping 6mm grade 7cm thickness correct line and level including cutting joints neatly ,cost and conveyance of all materials and labour charges etc. complete

16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

OD28767/2025-2026 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

30.2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

OD25633/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 180cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 year after planting. Foxtail palm

OD25634/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 100 cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 Year after planting. Snowball Carpet

OD25641/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 90cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 Year after planting. Bougainvillae

OD25643/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 100 cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 Year after planting. Kaner plant

OD25644/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 100 cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 Year after planting. Cordylineplant

SANITARY FIXTURES OD24454/2025-2026 Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.

17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type)with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flushbend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement withspecials of standard make and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting and making good thewalls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15 mm nominal bore

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge

17.32.3 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350 mm (outer dimensions)

17.32.4 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

OD24543/2025-2026 Providing, fixing, testing, and commissioning at site a chromium-plated (CP) bottle trap for wash basin, including all necessary fittings, connections, and accessories, complete as per specifications.

OD24554/2025-2026 Providing and fixing a chromium-plated (CP) robe hook at site, including all necessary fixing screws and accessories, complete as per specifications.

50.17.1.2 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.34.1 Providing and fixing toilet paper holder: C.P. brass

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

50.17.1.1 Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD24604/2025-2026 Providing, Supply, installation, testing and commissioning of CP Grab bar 45 cm, complete including cutting and making good the walls, wherever required.

OD24644/2025-2026 Providing, Supply, installation, testing and commissioning of CP Hinged rail , complete including cutting and making good the walls, wherever required.

SOIL,WASTE,VENT &RAIN WATER PIPES OD24685/2025-2026 Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) a) 110 mm O.D. (SWR Type-B)

SOIL,WASTE,VENT &RAIN WATER PIPES OD24693/2025-2026 Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) b)75mm O.D.

50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.8.8.1 . Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.8.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.75 mm dia 6 Kgf/ cm2

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6 Kgf/ cm2

OD24721/2025-2026 Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects

OD24723/2025-2026 Providing, Fixing, testing and commissioning at site in position Concealed floor trap (4”Deep Seal UPvc fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.

OD24998/2025-2026 Providing, Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron) (for 110mm dia pipe)

OD25047/2025-2026 WATER SUPPLY PIPES Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 20 mm dia.

OD25085/2025-2026 WATER SUPPLY PIPES Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 25mm dia

OD25135/2025-2026 WATER SUPPLY PIPES Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft) 32mm dia

18.18.2 Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete: 20mm nominal bore

18.18.3 Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete: 25mm nominal bore

OD25301/2025-2026 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, brass nuts, rubber insertions etc. 25 mm dia

OD25323/2025-2026 Supply, installation, testing and commissioning of 20mm. Air Release Valve gunmetal, conforming to IS 903:1993, having rubber ball and with 20mm. BSP threaded male inlet, including necessary accessories and connections. 20 mm air release valve

OD25349/2025-2026 Providing,Fixing,testing and commissioning at site GI Slotted Rail Brackets,hangers,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts with suitable GI clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.Electro Galvanized (In shaft and dry interior areas)

OD25364/2025-2026 Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand)with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8gradedstone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stoneaggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design. Inside size 60x60 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 600*600 mm internal diameter, total weight of cover and frame to be not less than 62 kg . Inside size 60x60 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 600*600 mm internal diameter, total weight of cover and frame to be not less than 62 kg . With Sewer bricks conforming to I S:4885

OD25624/2025-2026 Inside size 45x45 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 450*450 mm internal diameter, total weight of cover and frame to be not less than 58 kg . With Sewer bricks conforming to I S:4885

19.4.2.2 150x100 mm size P typeWith sewer bricks conforming to IS:4885

OD25639/2025-2026 Supplying, Fixing, Testing & commissioning at site in position UV Stabilised Polyethylene septic tank ( 25-35 Flush /day- Type -5)

OD25649/2025-2026 Supplying and fixing a square soak pit (90 x 90 x 150 cm), including excavation, base with compacted aggregate, honeycomb brick walls or equivalent, inlet pipe, RCC cover with inspection hole, backfilling, and site cleaning — all complete as per specifications.

OD31608/2025-2026 Supplying, installing, testing and commissioning of factory-moulded rotationally moulded PVC/HDPE loft-type water storage tank of capacity 200/250 litres, conforming to IS:12701, including all necessary fittings such as inlet/outlet connections, overflow and drain connection, PVC float valve, mosquito-proof cowl, support base/frame if required, and making proper connections to plumbing lines. The tank shall be securely fixed and installed at loft level or designated location including all accessories, tools, labour, scaffolding, and necessary civil supports as required to complete the job in all respects."

POINT WIRING Point wiring in PVC conduit with modular type switch: 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess,including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch,connection etc. as required. (For light plugs to be used in non residential buildings).

SF SP/TP MCB DB's &VDB's 2.3.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1 Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.40 Amps

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 Amps

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

MV CABLE LAYING AND END TERMINATION MV CABLE LAYING OD26743/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 25 sq.mm. AL. Armoured XLPE insulated cable

OD26756/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 16 sq.mm. AL. Armoured XLPE insulated cable

OD26757/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 10 sq.mm. Al. Armoured XLPE insulated cable

OD26758/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 3 CORES AL. CONDUCTOR 4 sq.mm. Al Armoured XLPE insulated cable

OD26759/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 2 CORES AL. CONDUCTOR 10 sq.mm. Al Armoured XLPE insulated cable

OD26760/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 2 CORES AL. CONDUCTOR 6 sq.mm. Al Armoured XLPE insulated cable

OD26761/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 3 CORES Cu. CONDUCTOR 1.5 sq.mm. Cu Flexible insulated cable

7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required Upto 35sq.mm

9.1.34 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)

9.1.33 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

9.1.32 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm)

EARTHING GI PIPE EARTHING STATIONS 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

SAFETY AND TESTING EQUIPMENTS 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

INTERNAL LIGHT FITTING ,INDUSTRIAL SOCKETS,FLOOR BOXES AND FANS OD26856/2025-2026 Supply Installation, Testing and commissioning of 15W LED recessed down light with die cast alumiunium powder coated body LED with CCT: 3000K, CRI>80RA, luminous efficeincy>100lm/W, IP54 rating, isolated constant current driver with low harmonic with p.f>0.95.

OD26855/2025-2026 Supply, Installation testing and commissioning of Inline Circular/Cabinet Exhaust fans of size 6", 40W with suitable blower, Single phase phase(IE3) direct driven motor , with structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications.

EXTERNAL LIGHTING OD26866/2025-2026 SITC of 80W LED Street light luminaire (IP66 - NABL accrediated party lab test report shall submitted), BIS certified with a flat toughened glass protector of IK08 - (NABL accrediated party lab test report shall submitted for enhanced aesthetics and better light control, body of epoxy powder coated pressure die cast aluminium housing. Must have secondary optics. Suitable for bracket mounting for 42 mm diameter pipe. Overall luminous efficiency of 120lm/W (LM 79 test report from NABL accrediated party lab test report shall submitted) at correlated colour temperature (CCT) of 5700K, colour rendering index (CRI) greater than 70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240V ac, Power Factor ≥ 0.95, with potted driver having internal surge protection of 4 kV and an additional surge protection device (SPD) of 10 kV. LM80 test report shall be submitted. ( To be installed on Pole in the median)

OD26937/2025-2026 SITC of 8Mtr height decorative octagonal pole made of Sheet steel as per IS Standard having thickness of 3mm. Base Plate dimensions shall be 200x200x16mm with 4Nos of slotted holes suitable for M20x600mm J Bolt, nuts and washers. The Pole shall hot dip galvanised to minimum 70 micron. The pole shall have door opening as internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) without any deformation or damage to the structure. Hot Dip Galavanised 1000mm overhang double side bracket tightned to the pole top with stainless steel grub screws to mount the luminaries. The entire structure shall be hot dip galvanised. . Contractor has provide pole earthing as per the requirement from OEM

OD26939/2025-2026 SITC of 8Mtr height decorative octagonal pole made of Sheet steel as per IS Standard having thickness of 3mm. Base Plate dimensions shall be 200x200x16mm with 4Nos of slotted holes suitable for M20x600mm J Bolt, nuts and washers. The Pole shall hot dip galvanised to minimum 70 micron. The pole shall have door opening as internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) without any deformation or damage to the structure. Hot Dip Galavanised 1000mm overhang Single side bracket tightned to the pole top with stainless steel grub screws to mount the luminaries. The entire structure shall be hot dip galvanised. ( To be installed on Pole in the median). Contractor has provide pole earthing as per the requirement from OEM

OD26945/2025-2026 SITC of 15W LED Bollard having height of 1000mm height from ground level, BIS certified with a Epoxy powder coated in Graphite grey cylindrical steel pipe, permanently sealed optical block (IP66) with PDC Heat sink on Top and extruded aluminum body in grey powder coated.Highly efficient symmetric light distribution providing excellent photometry to maximise the spacing between the bollards.Suitable for on-ground mounting on 4xM10 bolts on 180mm PCD. System power of 15W, Correlated colour temperature (CCT) of 3045K±175K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV (seating area, fountain area)

OD26953/2025-2026 SITC of 10W Surface mounted landscape light with beam angle of 36 -45 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 800lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26954/2025-2026 SITC of 30W Surface mounted landscape light with beam angle of 36 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 2400lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26957/2025-2026 SITC of 30W LED flood light with beam angle of 90x90 degree, LED SMD chip with CCT : 3000K, CRI >80, with luminous efficiency of >120lm/W, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear/frosted tempered gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26962/2025-2026 SITC of 6W Surface mounted landscape light with beam angle of 36 -45 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 480lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (round about area)

OD26965/2025-2026 Supply of 30W LED Decorative Post top Classic luminaire (IP66), BIS certified with a body and frame made of high pressure die cast aluminum, a Frosted flat glass protector (IK08) fixed on to the optical unit, separate optical and control gear compartment designed for tool free opening and closing with automatic electrical disconnection, a vent pressure equalization unit and pre-cabled as required. Highly efficient temperature resistant lenses for symmetric light distribution with several optical options providing excellent photometry to optimally cater to different applications. Overall system efficiency of 110lm/W at correlated colour temperature (CCT) of 4000K/3000K/5700K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire colour shall be dark/graphite grey.

OD26970/2025-2026 Supply of 3.5MTR height hot dip galvanized decorative Pole with cast iron ornamental embellishments. The pole shall made out of mild steel/steel pipe with thickness minimum of of 3-4mm. Pole shall have two sections:- Bottom section with height of 1MTR height and dia of 140mm. Upper section with 2.5MTR height and dia of 76 mm. The pole shall have cast iron ring in the middle of upper section and cast iron decorative neck reducer jointing upper and bottom part. The base part of pole shall have aesthetic appealing cast iron base with minimum dia of 160mm mounted on base plate. Base Plate dimensions shall be 250X250X12mm with 4Nos of slot suitable for M16x450mm J Bolt, nuts and washers. The Pole shall hot dip galvanized to minimum 65 micron. After galvanization high quality primer coating and PU paint and marine grade treated to minimum 100 microns (Total 165 micron). Poles using pre galvanized steel tubes or hot dip galvanized through double dip process are not acceptable. The pole shall have internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) of 169kmph without any deformation or damage to the structure. The entire structure shall be hot dip galvanized and marine grade treated. The Pole colour shall be dark/graphite grey.

OD33394/2025-2026 Supply and installation of 2.0 metre long NP-2 class Hume pipe (225 mm inner diameter), laid under road crossings by open cut method (or thrust boring if specified), suitable for accommodating electrical cables up to 200 mm overall bundle diameter, including excavation, proper bedding, aligning, jointing, backfilling, compacting and reinstating the road surface to original condition as per specifications and directions of Engineer-in-Charge.

FRP ENCLOSURES OD27036/2025-2026 Supply installation testing of FRP enclosures box with openable door made of Thermoplastic Glass Fiber Reinforced Polycarbonate (PC) - Outdoor should have Degree of Ingress Protection IP 65 in accordance with IEC 60529. The Junction Box shall have hinged door/cover. The Junction Box shall have pre punched / knock out for cable entry in all the four sides as well as on the back side. Drilling holes at the work site is not permitted., DIN rail for mounting RCBO, MCBs. The Junction Box shall be UV resistance. The enclosures shall have the minimum dimensions as below, Support for mounting Enclosures to ground. a) Outdoor Glass Fiber Reinforced Polycarbonate (PC) 250 x 250 x 122 mm

OD27044/2025-2026 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current operated circuit breaker with overcurrent protection (RCBO),having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 32A 100mA 2P RCBO (Feeder pillar Incomer)

FEEDER PILLARS OD27073/2025-2026 Supply installation testing & commisioning of MCB box with openable door made of Thermoplastic Glass Fiber Reinforced Polycarbonate (PC) - Outdoor / Polystyrene (PS) - Indoor should have Degree of Ingress Protection IP 65 in accordance with IEC 60529. The Junction Box shall have hinged door/cover. The Junction Box shall have pre punched / knock out for cable entry in all the four sides as well as on the back side. Drilling holes at the work site is not permitted. The Junction box shall be suitable to perform under ambient temperature for PS -25 degC up to +40 degC & PC -35 degC up to +80 degC & should be able to resist temperature up to +130 degC. The JB shall be halogen & silicon free. The PC thermoplastic JB shall be fire retardant & self-extinguishing, the combustion behavior shall be in accordance with VDE 0471 / UL 94 for 960degC. The Junction Box shall be UV resistance. The enclosures shall have the minimum dimensions as below. a)Outdoor Glass Fiber Reinforced Polycarbonate (PC) 250 x 370 x 122 Min 24 module

OD27079/2025-2026 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current operated circuit breaker with overcurrent protection (RCBO),having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 32A 100mA 4P RCBO (Feeder pillar Incomer)

2.10.4 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

15.4.3 Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required 3 output (1output per phase) and suitable for three phase supply

NON SEZ 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

15.5 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

15.19 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.

OD31685/2025-2026 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 1km lead as per direction of Engineer-in-Charge.

16.83 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

OD24272/2025-2026 Dismantling and stacking of pole/ street light standared/strut embedded in cement concrete in foundation.Rates include costof labour,supervision machineries and Lead upto 1 km.

EARTHWORK 2.32 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked -All kinds of soil

OD27591/2025-2026 Providing and applying Antitermite treatement by injecting chemical emulsion Imidacloprid emulsiable concentrate .075% for pre-constructional treatement and creating a chemical barrier as per IS 6313 (Part ll) 2001 for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building,etc. complete conforming to manufacturers specification and as directed by the Engineer-in-Charge.(Plinth area only to be measured for the payment ) (The above work shall be carriedout by an agency having sufficient experience and should ensure a warranty for a period of 10 years. Only skilled and experienced persons shall be employed for this purpose.)

CONCRETE WORKS 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

OD27602/2025-2026 Providing & Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

REINFORCED CEMENT CONCRETE WORKS 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is not payable or recoverable separately. All work upto plinth level

5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is not payable or recoverable separately.All works above Plinth level upto floor V Level

FORMWORK OD24439/2025-2026 Centering and shuttering in circular work : Centering and shuttering including strutting, etc. and removal of form for:Curved walls, Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.5 Centering and shuttering including strutting, etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Centering and shuttering including strutting, etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

STEEL 5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.22A.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more

MASONRY WORK 50.6.1.4 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 below plinth l thickness 20 cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete

50.6.1.5 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for superstructure upto floor two level thickness 20 cm and above in: CM 1:6 (1 cement : 6 coarse sand) etc complete

50.6.3.2 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

6.15 Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half thick solid block masonry.

JOINERY WORKS 9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.The Frame shall be fixed to FRP Wall as per drawing.

9.122.2 Providing and fixing to existing door frames30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

OD24494/2025-2026 Providing material and labour for fixing Zinc material indicator bolt of approved make for toilet door with Thumb Turn inside & Emergency Release & Indicator Outside with necessary screws etc complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

9.14 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured).

9.77 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.

STEEL WORK 10.16.3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

10.19 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

FLOORING 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile- 600 x 600 mm.

11.41.3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile - 800 x 800 mm

OD28583/2025-2026 Providing and laying flamed finish Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all completeas per the architectural drawings with 18 mm thick stone slab over 20 mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid andjointed with cement slurry and pointing with white cement slurry admixed withpigment of matching shade including rubbing, curing and polishing etc. allcomplete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.

16.86.1 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge a)With granite stone of area less than 0.50 sqm.

WATERPROOFING 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

OD24536/2025-2026 Supply and fixing of Exterior Polyvinyl ceiling of panel sizes of 250mmx 2950mm or nearest and 1.2 mm thickness, durable and resistant to moisture, water and borer-fungus-termite attack complies with IS 875 part 3 1987 on wind loading, the same should be tested for and complying to a wind Ioad resistance of minimum 1.2 kpa (as tested by an independent and competent authority) as per prevalent and in practice wind loading norms and procedures. Panels to be installed with GI sections of suitable gauge as per the installation of planks & size according to site conditions . Panels with suitable trims for edge profiles, Connecting profiles, starter and ventilation profile, exterior corner profiles shall be used . Panels must be maintenance free , rust proof and are 100% Water proof. 10 years warranty for colour & finish of the panels.The rate is including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels. Contractor should submit detailed design and corresponding calculations of design of all structural suspension system of false ceiling structural steel support and shop drawings vetted by a consultant in accordance with design parameters specified by the consultant and the codal requirements of BIS (Bureau of Indian Standards) latest version, all relevant safety codes, etc as directed by the Engineer-in-Charge.Vetting shall be in the scope of the Contractor. Only skilled and experienced persons shall be employed for this purpose and should ensure guarantee for installation, ceiling panels and supporting system for & a period of 10 years from the date of completion of the said work. The measurement shall be taken along the girth on the bottom side of the ceilings, in square meters and deduction shall be made for all openings exceeding 0.4 Sqm in area.

OTHER WORK OD24540/2025-2026 Providing and fixing jali of size 200mm x 200mm x 60mm, made from cement block material to be installed as per design requirements. The Jali shall have a uniform perforation pattern and natural finish, with smooth edges and a durable surface treatment to ensure long-term resistance to environmental factors as per drawing. Installation includes setting the Jali in the designated locations, ensuring proper alignment and level, and securing it using proper adhesive as per project specifications. The work includes all necessary labour, materials, and tools,scaffolding etc. for installation, ensuring that the Jali is securely fixed and properly integrated with adjacent structures. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge..

OD28223/2025-2026 Providing and fixing clear glass block jewel of size 190mm x 190mm x 80mm, with a transparent finish and smooth surface. The blocks should have polished edges and be constructed from high-quality clear glass to ensure maximum light transmission, typically around 85%. Installation will involve setting the blocks with a white adhesive with joint spacing to be maintained at 10mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge.

OD24550/2025-2026 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. A) 3.50 mm thick flat Sheets

12.51.6 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : A ) Gutter (600 mm over all girth)

OD24597/2025-2026 Supply, installation, testing, and commissioning of ring metal sculpture with integrated water fountain feature. The sculpture shall be fabricated using 2mm glossy stainless steel sheet of 316 grade supported on 40mm x 40mm x 2mm ( two nos at both edges at 210 mm apart) as main frame and 25mm x 25mm x 2 mm as intermediate frame to join both main frames as per the detailed drawing. The inside dimension of the ring is 1850 mm x 2100 mm (Oval Shape ) and the thickness of the ring is 75mm on longitudnal sides and 88mm on lateral sides respectively. The sculpture shall be fixed in a slanting position with Mild Steel (MS) plate supports bolted to the RCC foundation.The top portion of the sculpture shall be anchored using 12mm dia Stainless Steel rods (SS 316) connected to the fountain base , as per the detailed drawings. The 12mm dia Stainless rods shall be fixed to the RCC foundation with MS plates as per the drawing. Provision shall be made for water spouting at the top of the sculpture, as per the design specifications The rate is inclusive of cost and conveyance of all materials, labour , transportation etc.complete .

OD24598/2025-2026 Providing and fixing in postion FRP Bench with Planter Box of Length 361 cm ,46 cm width and 36 cm height with FRP back support for a height of 67 cm and width 30 cm. The back support shall be provided with planter box of inside width 20 cm and depth of 25 cm through out length.The bench shall be prepared as per approved drawing and as per the direction of E.I.C.The cost is including necessary frame work. etc complete.The Bench shall be made of FRP 11 to 12 mm thickness ( 1000kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness. ( Type 2 -L Shape)

OD28224/2025-2026 Providing and fixing in postion Rectangular FRP Bench with Planter Box of Length 170 cm, 78 cm width( i/c planter box)and 36 cm height with planter box on bothside . One side length 120 cm x 17 cm x 25 cm and other side planter 40 cm x 17 cm x 25 cm .The bench shall be prepared as per approved drawing and as per the direction of E.I.C.The cost is including necessary frame work. etc complete.The Bench shall be made of FRP 7 to 8 mm thickness ( 600kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness.( Type 2 -middle of L Shape)

OD28225/2025-2026 Providing and fixing in postion FRP Bench Length with Planter Box of 520cm, 50 cm width, 36 cm height with back support for a height of 68 cm and width 21 cm.The end support is 44 cm height and 12 cm width . The back support shall be provided with planter box of inside width 30 cm and depth of 25 cm through out lengthThe bench shall be prepared as per approved drawing and as per the direction of E.I.C The cost is including necessary frame work. etc complete.(Type-I)The Bench shall be made of FRP 11 to 12 mm thickness ( 1000kg capacity ) and the planter box shall be made of FRP thickness 2 to 3 mm thickness.

OD24606/2025-2026 Providing and fixing 50mm thick Glass Fibre Reinforced Plastic (FRP) partition with 2.7 mm thick panels on either side with infill of polyurethane foam (PUF) / Polystyrene foam as filler material throughout the panel, to be casted monolithically with testing parameters of F.R.P complete as per direction of Engineer-in-charge. The partition shall be fixed to the framework as per drawing specification. The rate is inclusive of the cost and conveyance of all fixing accessories, and installation cost. etc complete. The framework shall be measured under relevant item.

OD24608/2025-2026 Providing and fixing Glass Fibre Reinforced Plastic (FRP) Trash box of size 600 mm x 600 mm x 750 mm ( outer to outer ) made out of FRP planks of size 760 mm length x 85mm width x 30mm thick fixed at 3 cm apart vertically supported on MS framework as per the drawing. The signage lettering shall be of FRP material.Te MS frame shall be paid separately at relevant item. The rate is inclusive of cost and conveyance of all fixing accessories, labour for installation, etc complete as per direction of engineer incharge and as per drawing signages

OD24611/2025-2026 Providing, fabricating, and erecting on-site Glass Fibre Reinforced Plastic (FRP) Direction sign board with 2.5 mm thick panels on either side with infill of polyurethane foam (PUF) / Polystyrene foam as filler material throughout the board of size 600 mm length, 50 mm breadth and 2200 mm height as per the detailed drawing. The Signage board is supported on the MS framework as per the detailed drawing and specifications. The Signage lettering shall be of FRP material. The MS framework shall be paid separately under relevant item. The rate is inclusive of the cost and conveyance of all fixing accessories, installation, labour etc complete

OD24612/2025-2026 Providing and fixing of letter & logo out of Stainless steel sheet (SS-304 grade) of thickness 1.mm.The letters shall be fixed with the help of stainless steel studs on existing granite wall which shall not be visible from the front. The stainless-steel studs shall be properly grouted with suitable selant. The design of wall is mentioned in the tender drawing. . Test report for conformality of material for specifications shall be provided. The work shall be executed to the satisfaction of Engineer- in charge

SCULPTURE ART OD24616/2025-2026 GRC Sculpture with acid wash finish : Providing and fixing in position at required location, GRC (Glass reinforced concrete) sculpture of dimension 2.3 mtr height x 1.8 mtr width x 0.3 mtr thick as per Architect's Design/Drawing and as directed by Engineer-in-Charge.The RCC Foundation shall be measured under relevant item.The rate shall inclusive of cost & conveyance of all materials, labour etc.complete.

OD24619/2025-2026 FRP " S Shape" Sculpture with Glass Block Design: Providing, fabricating, and erecting on-site Glass Fibre Reinforced Plastic (FRP) Sculpture with Glass block design and FRP base . The dimension of " S " Shape shall be 6.16 mtr length x 0.3 mtr width .The dimension of FRP base is 2.1 mtr length x 2 mtr width x 0.1 mtr thickness.The rate is inclusive of the cost and conveyance of all fixing accessories, installation, labour etc complete

SOFTSCAPE & HARDSCAPING OD24621/2025-2026 Supplying, laying machine cut, surface grinded, levelled and rough granite cobble stone varying size and thickness 6cm to 8cm laid in stone chipping 6mm grade 7cm thickness correct line and level including cutting joints neatly ,cost and conveyance of all materials and labour charges etc. complete

16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

11.45 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

OD28640/2025-2026 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.

30.2.8 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment).

30.2.9 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

OD24630/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 180cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 year after planting. Foxtail palm

OD24631/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 100cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 years after planting. Snowball Carpet

OD24632/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 100 cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 years after planting. Bougainvillae

OD24633/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 90cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 year after planting. Kaner plant

OD24636/2025-2026 Procuring and planting specified nursery grown trees, shrubs and other plants of height not less than 90cm .Rates include plant cost,transport, cost of manure, planting, labour,supervision and maintenance for 1 year after planting. Cordylineplant

SANITARY FIXTURES OD25690/2025-2026 Providing, Fixing, Testing and Commissioning at site Wall Mounting type water closet with P trap & its all fittings like rag bolts, solid plastic Seat cover etc and Concealed flushing cistern, brass screws, nuts , and washers complete including cutting and making good the walls and floors wherever required. Etc complete.

17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap.

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15 mm nominal bore

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge

17.32.3 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350 mm (outer dimensions

17.32.4 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

OD25721/2025-2026 Providing, fixing, testing, and commissioning at site a chromium-plated (CP) bottle trap for wash basin, including all necessary fittings, connections, and accessories, complete as per specifications.

OD25738/2025-2026 Providing and fixing a chromium-plated (CP) robe hook at site, including all necessary fixing screws and accessories, complete as per specifications.

50.17.1.2 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.34.1 Providing and fixing toilet paper holder: C.P. brass.

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

50.17.11 Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

OD25753/2025-2026 Providing, Supply, installation, testing and commissioning of Driniking water Founden with S S 316 top and body ADA compliant when properly installed .MD -CU 29 -ANT -microbial copper body-kills 99.9 % germs ,Built in 100 micro strainer to stop particles before they enter the water way ,lead free construction of material,flexible bubbler guard ,requared addicated cooling tank tank having minimum capacity of 40 Ltr . The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats,relay.ANSI/NSF 61 Cerrtified machine r etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

OD25788/2025-2026 Supplying, Fixing, Testing & commissioning at site in position Floor Inlet : Made in ABS with S.S. Screws. Regulable Flow. Flow per Inlet 32 mm: . White Colour.

OD25797/2025-2026 Supplying, Fixing, Testing & commissioning at site in position Suction Nozzle : Made in ABS. 32mm connection. White Colour.

SOIL,WASTE,VENT &RAIN WATER PIPES OD25813/2025-2026 Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 110 mm O.D. (SWR Type-B)

OD25821/2025-2026 Providing, Fixing, testing and commissioning at site in position uPVC pipe (SWR-Type B) (IS:13592) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, clamps, coupling, door bends, junctions, cowls, etc., laid under floor/fixed on walls, and in pipe shafts, universal clamps & anchor fasteners(8mm), threaded rod (8mm),nuts, washers, wherever required etc. complete. (In Shaft) 75mm O.D.

50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.8.6.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

50.18.8.8.1 . Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6 Kgf/ cm2

OD25843/2025-2026 Supplying,Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover ss (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects

OD25846/2025-2026 Providing, Fixing, testing and commissioning at site in position Concealed floor trap (4”Deep Seal UPvc fabricated Multi floor trap with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw and suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects.

OD25849/2025-2026 Providing, Fixing, testing and commissioning at site in position Floor clean out with Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects.

OD25884/2025-2026 Providing, Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet (Cast Iron) (for 110mm dia pipe)

WATER SUPPLY PIPES OD25917/2025-2026 Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)20 mm dia.

WATER SUPPLY PIPES OD26118/2025-2026 Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)25mm dia

WATER SUPPLY PIPES OD26154/2025-2026 Providing, Fixing at site in position uPVC Pipes (as per ASTM D – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External / Inshaft)32mm dia

18.18.2 Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:20mm nominal bore

18.18.3 Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:25mm nominal bore

OD26215/2025-2026 Providing and Fixing Ball Valves (Brass) of approved quality, High or low pressure, with plastics floats complete:32mm nominal bore

OD26222/2025-2026 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately): 25 mm dia

OD26239/2025-2026 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):32 mm dia

OD26253/2025-2026 Supply, installation, testing and commissioning of 20mm. Air Release Valve gunmetal, conforming to IS 903:1993, having rubber ball and with 20mm. BSP threaded male inlet, including necessary accessories and connections. 20 mm air release valve

OD26256/2025-2026 Providing,Fixing,testing and commissioning at site GI Slotted Rail Brackets,hangers,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts with suitable GI clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.Electro Galvanized (In shaft and dry interior areas)

18.19.2.1 Providing and fixing gun metal non-return valve of approved quality (screwed end): 32 mm nominal bore Horizonta

OD26275/2025-2026 Providing,Fixing, testing and commissioning at site in positions as detailed in drawings, Brass Foot Valves complete in all respect. 25 mm dia

OD26286/2025-2026 Providing,Fixing, testing and commissioning at site in positions as detailed in drawings, Brass Foot Valves complete in all respect. 32 mm dia

OD26374/2025-2026 Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8gradedstone aggregate 40mm nominal size), inside plastering 12mm thick with cementmortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement andmaking channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design. Inside size 60x60 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 600*600 mm internal diameter, total weight of cover and frame to be not lesst han 62 kg . With Sewer bricks conforming to I S:4885

OD26392/2025-2026 Constructing brick masonry manhole in cement mortar 1:4 (1 cement:4 coarse sand) with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coars sand:8gradedstone aggregate 40mm nominal size), inside plastering 12mm thick with cementmortar 1:3 (1 cement :3 coarse sand) finished with floating coat of neat cement andmaking channels in cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 20mm nominla size) finished with a floating coat of neat cement complete as per standard design. Inside size 45x45 cm and up to 1 meter deep including D.I. cover with frame (Heavy duty) 450*450 mm internal diameter, total weight of cover and frame to be not less than 58 kg .With Sewer bricks conforming to I S:4885

19.4.2.2 150x100 mm size P typeWith sewer bricks conforming to IS:4885

OD26407/2025-2026 Supplying, Fixing, Testing & commissioning at site in position UV Stabilised Polyethylene septic tank ( 25-35 Flush /day- Type -5)

OD26416/2025-2026 Supplying and fixing a square soak pit (90 x 90 x 150 cm), including excavation, base with compacted aggregate, honeycomb brick walls or equivalent, inlet pipe, RCC cover with inspection hole, backfilling, and site cleaning — all complete as per specifications.

OD26418/2025-2026 Supplying and fixing a square soak pit (60 *60*100 cm), including excavation, base with compacted aggregate, honeycomb brick walls or equivalent, inlet pipe, RCC cover with inspection hole, backfilling, and site cleaning — all complete as per specifications.

OD27271/2025-2026 Providing, Fixing, testing and commissioning recirculation pump with ( 1W) Nos Submercible pumpset with Ci impeller ,Ci :Motor Casing ,. Each pump capable to deliver 4 lps@ 10 mtr Head ( maxi head range 50 mtr ) and with 1.1kw/ 1.5hp / 1Ph, . A Wall Mounting control panel for pumps operate the pumpset as 1 working level controller with Dry Run Protection, Overload protection, float switch/ Sensors for automatic operation ,etc . The entire system to be supplied with all the pump sets and automatic pump controller Delivery Pipe Size to be provided : 32 MM

OD31623/2025-2026 Supplying, installing, testing and commissioning of factory-moulded rotationally moulded PVC/HDPE loft-type water storage tank of capacity 200/250 litres, conforming to IS:12701, including all necessary fittings such as inlet/outlet connections, overflow and drain connection, PVC float valve, mosquito-proof cowl, support base/frame if required, and making proper connections to plumbing lines. The tank shall be securely fixed and installed at loft level or designated location including all accessories, tools, labour, scaffolding, and necessary civil supports as required to complete the job in all respects."

POINT WIRING Point wiring in PVC conduit with modular type switch: 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium class pvc conduit conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess,including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch,connection etc. as required. (For light plugs to be used in non residentialbuildings).

SF SP/TP MCB DB's &VDB's 2.3.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1 Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.40 Amps

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 Amps

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

OD26489/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 25 sq.mm. AL. Armoured XLPE insulated cable

OD26756/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 16 sq.mm. AL. Armoured XLPE insulated cable

OD26757/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 4 CORES AL. CONDUCTOR 10 sq.mm. Al. Armoured XLPE insulated cable

OD26758/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 3 CORES AL. CONDUCTOR 4 sq.mm. Al Armoured XLPE insulated cable

OD26759/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 2 CORES AL. CONDUCTOR 10 sq.mm. Al Armoured XLPE insulated cable

OD26760/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 2 CORES AL. CONDUCTOR 6 sq.mm. Al Armoured XLPE insulated cable

OD26761/2025-2026 Supplying the following X.L.P.E insulated 1.1 kV grade aluminium/copper conductor cable conforming IS:1554 ( Part-I ) 3 CORES Cu. CONDUCTOR 1.5 sq.mm. Cu Flexible insulated cable

7.1.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required Upto 35sq.mm

9.1.34 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)

9.1.33 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

9.1.32 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm)

EARTHING GI PIPE EARTHING STATIONS 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

SAFETY AND TESTING EQUIPMENTS 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

INTERNAL LIGHT FITTING ,INDUSTRIAL SOCKETS,FLOOR BOXES AND FANS OD26856/2025-2026 Supply Installation, Testing and commissioning of 15W LED recessed down light with die cast alumiunium powder coated body LED with CCT: 3000K, CRI>80RA, luminous efficeincy>100lm/W, IP54 rating, isolated constant current driver with low harmonic with p.f>0.95.

OD26541/2025-2026 Supply, Installation testing and commissioning of Inline Circular/Cabinet Exhaust fans of size 6", 40W with suitable blower, Single phase phase(IE3) direct driven motor , with structural supports , vibration isolator if required ,other accessories etc. complete in all respects as per technical specifications.

EXTERNAL LIGHTING OD26549/2025-2026 SITC of 80W LED Street light luminaire (IP66 - NABL accrediated party lab test report shall submitted), BIS certified with a flat toughened glass protector of IK08 - (NABL accrediated party lab test report shall submitted for enhanced aesthetics and better light control, body of epoxy powder coated pressure die cast aluminium housing. Must have secondary optics. Suitable for bracket mounting for 42 mm diameter pipe. Overall luminous efficiency of 120lm/W (LM 79 test report from NABL accrediated party lab test report shall submitted) at correlated colour temperature (CCT) of 5700K, colour rendering index (CRI) greater than 70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240V ac, Power Factor ≥ 0.95, with potted driver having internal surge protection of 4 kV and an additional surge protection device (SPD) of 10 kV. LM80 test report shall be submitted. ( To be installed on Pole in the median)

OD26552/2025-2026 SITC of 8Mtr height decorative octagonal pole made of Sheet steel as per IS Standard having thickness of 3mm. Base Plate dimensions shall be 200x200x16mm with 4Nos of slotted holes suitable for M20x600mm J Bolt, nuts and washers. The Pole shall hot dip galvanised to minimum 70 micron. The pole shall have door opening as internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) without any deformation or damage to the structure. Hot Dip Galavanised 1000mm overhang double side bracket tightned to the pole top with stainless steel grub screws to mount the luminaries. The entire structure shall be hot dip galvanised. Contractor has provide pole earthing as per the requirement from OEM

OD26553/2025-2026 SITC of 8Mtr height decorative octagonal pole made of Sheet steel as per IS Standard having thickness of 3mm. Base Plate dimensions shall be 200x200x16mm with 4Nos of slotted holes suitable for M20x600mm J Bolt, nuts and washers. The Pole shall hot dip galvanised to minimum 70 micron. The pole shall have door opening as internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) without any deformation or damage to the structure. Hot Dip Galavanised 1000mm overhang Single side bracket tightned to the pole top with stainless steel grub screws to mount the luminaries. The entire structure shall be hot dip galvanised. Contractor has provide pole earthing as per the requirement from OEM

OD26555/2025-2026 SITC of 15W LED Bollard having height of 1000mm height from ground level, BIS certified with a Epoxy powder coated in Graphite grey cylindrical steel pipe, permanently sealed optical block (IP66) with PDC Heat sink on Top and extruded aluminum body in grey powder coated.Highly efficient symmetric light distribution providing excellent photometry to maximise the spacing between the bollards.Suitable for on-ground mounting on 4xM10 bolts on 180mm PCD. System power of 15W, Correlated colour temperature (CCT) of 3045K±175K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV (seating area, fountain area)

OD26561/2025-2026 SITC of 10W Surface mounted landscape light with beam angle of 36 -45 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 800lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

SITC of 30W Surface mounted landscape light with beam angle of 36 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 2400lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26571/2025-2026 SITC of 30W LED flood light with beam angle of 90x90 degree, LED SMD chip with CCT : 3000K, CRI >80, with luminous efficiency of >120lm/W, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear/frosted tempered gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26573/2025-2026 SITC of 3W LED underwater light with beam angle of 36 degree, LED COB chip with CCT : 3000K, CRI >80, with luminous efficiency of >70lm/W, with SS304 body with IP68 weather proof & IK 10 impact protection with clear tempered gass diffuser, with isolated LED driver, rated voltage 24Vdc and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (fountain area)

OD26575/2025-2026 SITC of 100W 24VDC LED driver with IP67 weather proof protection. With inbuilt incoming and ourgoing cable. with an ambient temperature range of -20°C- 50°C. The scope includes supply and fixing of 24VDC RGB LED strip lights (power consumption 14.4W/m), housed in aluminium profiles for effective heat dissipation and aesthetics, complete with compatible RGB controllers, amplifiers, and remote control systems. All accessories required for the proper functioning of the LED strip lighting system, including connectors and mounting hardware, shall be included to ensure a fully operational and integrated lighting solution. (fountain area)

OD26588/2025-2026 SITC of 6W Surface mounted landscape light with beam angle of 36 -45 degree, LED COB chip with CCT : 3000K, CRI >80, with minimum of 480lumen, high pressure die cast aluminium body with IP66 weather proof & IK 08 impact protection with clear gass diffuser, powder coated finish to RAL 9004, with integral LED driver rated voltage 240Vac and built in cable for external connection to be connected with weather proof connectors of IP68 rating. with an ambient temperature range of -20°C- 50°C. (price including connectors) (round about area)

OD26592/2025-2026 Supply of 30W LED Decorative Post top Classic luminaire (IP66), BIS certified with a body and frame made of high pressure die cast aluminum, a Frosted flat glass protector (IK08) fixed on to the optical unit, separate optical and control gear compartment designed for tool free opening and closing with automatic electrical disconnection, a vent pressure equalization unit and pre-cabled as required. Highly efficient temperature resistant lenses for symmetric light distribution with several optical options providing excellent photometry to optimally cater to different applications. Overall system efficiency of 110lm/W at correlated colour temperature (CCT) of 4000K/3000K/5700K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire colour shall be dark/graphite grey.

OD26629/2025-2026 Supply of 3.5MTR height hot dip galvanized decorative Pole with cast iron ornamental embellishments. The pole shall made out of mild steel/steel pipe with thickness minimum of of 3-4mm. Pole shall have two sections:- Bottom section with height of 1MTR height and dia of 140mm. Upper section with 2.5MTR height and dia of 76 mm. The pole shall have cast iron ring in the middle of upper section and cast iron decorative neck reducer jointing upper and bottom part. The base part of pole shall have aesthetic appealing cast iron base with minimum dia of 160mm mounted on base plate. Base Plate dimensions shall be 250X250X12mm with 4Nos of slot suitable for M16x450mm J Bolt, nuts and washers. The Pole shall hot dip galvanized to minimum 65 micron. After galvanization high quality primer coating and PU paint and marine grade treated to minimum 100 microns (Total 165 micron). Poles using pre galvanized steel tubes or hot dip galvanized through double dip process are not acceptable. The pole shall have internal junction box/control box with connectors and provision for MCB. The pole shall designed to basic wind speed (IS 875 Part 3) of 169kmph without any deformation or damage to the structure. The entire structure shall be hot dip galvanized and marine grade treated. The Pole colour shall be dark/graphite grey.

OD33426/2025-2026 Supply and installation of 2.0 metre long NP-2 class Hume pipe (225 mm inner diameter), laid under road crossings by open cut method (or thrust boring if specified), suitable for accommodating electrical cables up to 200 mm overall bundle diameter, including excavation, proper bedding, aligning, jointing, backfilling, compacting and reinstating the road surface to original condition as per specifications and directions of Engineer-in-Charge.

FRPEN CLOSURES OD26638/2025-2026 Supply installation testing of FRP enclosures box with openable door made of Thermoplastic Glass Fiber Reinforced Polycarbonate (PC) - Outdoor should have Degree of Ingress Protection IP 65 in accordance with IEC 60529. The Junction Box shall have hinged door/cover. The Junction Box shall have pre punched / knock out for cable entry in all the four sides as well as on the back side. Drilling holes at the work site is not permitted., DIN rail for mounting RCBO, MCBs. The Junction Box shall be UV resistance. The enclosures shall have the minimum dimensions as below, Support for mounting Enclosures to ground. a) Outdoor Glass Fiber Reinforced Polycarbonate (PC) 250 x 250 x 122 mm

OD26647/2025-2026 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current operated circuit breaker with overcurrent protection (RCBO),having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 32A 100mA 2P RCBO (Feeder pillar Incomer)

FEEDER PILLARS OD26663/2025-2026 Supply installation testing & commisioning of MCB box with openable door made of Thermoplastic Glass Fiber Reinforced Polycarbonate (PC) - Outdoor / Polystyrene (PS) - Indoor should have Degree of Ingress Protection IP 65 in accordance with IEC 60529. The Junction Box shall have hinged door/cover. The Junction Box shall have pre punched / knock out for cable entry in all the four sides as well as on the back side. Drilling holes at the work site is not permitted. The Junction box shall be suitable to perform under ambient temperature for PS -25 degC up to +40 degC & PC -35 degC up to +80 degC & should be able to resist temperature up to +130 degC. The JB shall be halogen & silicon free. The PC thermoplastic JB shall be fire retardant & self-extinguishing, the combustion behavior shall be in accordance with VDE 0471 / UL 94 for 960degC. The Junction Box shall be UV resistance. The enclosures shall have the minimum dimensions as below. a)Outdoor Glass Fiber Reinforced Polycarbonate (PC) 250 x 370 x 122 Min 24 module

OD26664/2025-2026 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current operated circuit breaker with overcurrent protection (RCBO),having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 32A 100mA 4P RCBO (Feeder pillar Incomer)

2.10.4 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

15.4.3 Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required 3 output (1output per phase) and suitable for three phase supply

OD26672/2025-2026 Supply installation testing & commisioning of outdoor rated LED advertising billboard of size 12.6ft x 8.4ft with P4 pixel pitch, video resolution of 960 x640. with >5000nits brightness. with refresh rate of 1920Hz. With HD-A4 controller for manual data entry. With 7kVA stabilizer, with dedicated software for uploading data, control cables, data cables, power cables that may required for the successful working of the LED bill board. (SUPPORT STRUCTURE AND POWER CABLE NOT INCLUDED)

Delta Projects (BID ID -2442273)