Repairing & Renovation of District Education Office At M.S.Building,Himatnagar

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

1 Dismentling doors, windows, ventilators etc. (wood or 32.00 191.85 No

steel)shutters including chowkhats chitraves, hold fasts and

other attach mentetc. complete and stacking themwithin all

lead and lift. (i) Not exceeding 3 Sq.M. in area.

2 Demolition of Brick work and stone masonry including 6.80 562.84 Cmt

stacking of service able materilas and disposal of un

serviceable materials with all lead and lift.(ii) In Cement

3 Dismentaling tiled of stone floors laid in mortar including 16.00 49.18 Smt

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

4 Brick work using common burnt clay building bricks having 8.30 4495.98 Cmt

crushing strength not less than 35 kg./ Sq.Cm. in oundation

and plinth in Cement Mortar 1:6 (1-Cement : 6-fine sand) (B)

Conventional

5 Providing 15mm thick cement plaster insingle coat on Rough 215.70 184.78 Smt

(Similar) side of singleor half brickwalls for interior plaste ring

up to floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1- cement: 3-sand)

6 Applying general insecticide pest control treatment to floors, 427.50 81.43 Smt

cupboards etc including labour materials etc. omplete.

Using Imidacloprid 30.5 SCas Per IS 6313 part-II ( (0.075%

concentration by mass) is recommended 10.5ml chemical

diluted with 5 liters of water application 0.5 litre chemical

/Sqm of surface is recommended as per I.S. I.S

7 P&L 24"x24" vitrified 8mm thick tile flooring over 20mm 417.00 1311.18 Smt

(average) baseof cement mortar 1:6 (1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with color cement slurry including finished with

flush pointing & cleaning the surface etc. complete for Light

8 Providing & Fixing machine cut mirror polished 18mm thick 60.00 2589.24 Smt

Black granite stone in single piece laid over 20mm. average

thick base of cement mortar 1:6 (1.cement: 6. Coarse sand)

or L.M.1:1.5 and laid over and jointed with white cement

siurry mixed with pigment to match with shade of stone with

full mould adge with pipe round polishing complate inside, top

and bottom of window

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

9 Providing and fixing window having extruded aluminum 50.30 1713.70 Cmt

Colour Powder Coated section frame main outer size 63.50 x

38.10 x 1.95mm ,@ Wt 1.094Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20 mm @ wt. of

0.695 Kg / mt, vertical member of size 61.85 mm x 31.75 mm

x 1.30 mm @ wt. of 0.0.659 Kg / mt with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29 mm @ wt. of

0.456Kg / mt, vertical member of size 40mm x 18mm x

mm @ wt. of 0.456Kg / mt with 5mm hick transparent bronze

colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window

10 Providing & fixing Roller Blinds/ Roman blind of approved ISI 50.30 2525.00 Smt

marked shade and colour with using imported roller curtains

imported aluminium powder coated roller blind channel with

roller blinds mechanism inclusive of aluminium head rails duly

powder coated and fixing with stainless steel drive rods and

manually operatable with ISI marks etc. complete or as

directed by engineer in charge.

11 Providing and fixing G.F.C false ceilingwith using M.S. "E" 432.50 1295.43 Smt

channel , wall angle , and bottomchannel in framing with

mm thick Gypsumboard in ceilingwith indiaGypsum cotch

bolts and all the sections of India Gypsum with necessary

fixtures and fastening including copper wiring as per

requirement in ceiling and double mirror optic fixture with

CFL tubes at 10 sqm teach and 48 inch ceiling fanateach

sqm twith fitting etc completeor as directed.

12 Door Providing & fixing wooden Decortive door with frame 13.90 7575.00 Smt

With 35 mm thick shutters for Doors, windows and

clearstory windows including black enamel led M.S. but

thinges with necessary screws. (A) Indian teak wood. (i) Fully

13 GYPSUM PUNNING - Providing and applying Gypsum 216.00 443.34 Smt

punning in average of 12 mm to 20 mm thikness on wall,

ceilling , beamms and coloums to bring the surface in plumb

line level, including making the surface smooth, providing

required grooves on top of skirtingetc complete as oer

direction ( Note- rate too including cost of scrapping nerru /

any other finish on the existing plastered surface & hacking

the surface ) as per direction by Architect engineer in charge.

14 Wall painting (two coats) with plastic emulsion paint of 724.40 82.97 Rmt

approved brand and manufacture on un decorated wall surf

aceto givean even shade including throughly brushing the

surfce free from mortar droppings and other for eignmatter

and sand papered smooth

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

15 MIDDLE HEIGHT PARTITION Providing and fixing low 139.50 4156.54 Smt

height partitions, the average height of partition will be1520

mm. The basic structure shall be made out of theAlluminium

/ plywood / all wood section as framing , Aluminium/

plywood/ wood Box Section size of 50mm x25mmx 1.6mm

thickness & at suggested engneer i/c or architect i.e 600 c / c

fixed with each other 50MM*25MM*1MM thickness angle

cleat proper fixity. The entire Alu. framework shall becovered

with 8mm thickness plywood IS310 on both the sides. All

open sides of the framework shall be covered with the 12mm

thickness plywood for partitions. All the gaps either vertical or

horizontal with proper material shall be filled properly. All the

vertical members of the partition shall be inserted/ fixed in the

floor for proper strength necessary provisions shall be made

in the partition for the electrical conduits / switch boards/ etc.

The external plywood components including the thcikness of

partition shall be finished with 1 MM thickness decorative

laminate on both the sides. All visible exposed area of the

partition covered with Indian teakwood beading where ever

required. It shall have (3 coats ) malamine sprey polishing

finish. As per detail drawing and as directed by the Architect /

Engineer in Charge. {B/w Staff tables}

16 Pannelling With Laminate Finish 78.70 4242.00 Smt

Providing fixing installation at site Beam wooden Panneling

made out of 18 mm thivk plywood IS 310 grade and back of

the side unit is of 8mm ply puthi unit is provided with with

veeyical and horizantal devisions as per design the panneling

should be finished with I MM thickness blancing Laminate,

Expoesd out side surface finished with IMM thickness

standard grade laminate of approved design and make all

exposed edges finished with first Quality Teak wood

beadings to be finished in hard high gloss PU coating as per

drawing and direction of Architect Engineer in charge

17 Providing & Supplying Wooden Executive Table Having Size 7.20 10456.03 Smt

of 1800 (L) X 1000 (W) X 760(H) mm with necessary wooden

with 8mm glass on laminated tops up ports and framing of

18mm thick BWP plywood or equivalent and 1 mm thickness

Laminate/ Veneer with cost of all material &Labours with

inside inside white colour in nersunmica sheet , SS Studs and

box with Three Drawers & necessary fixturesand fastenings.

Thework shall be done as per drawing or directed by

Engineer Incharge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

18 Providing & Supplying Wooden Office Table with laminated 8.40 16579.69 Smt

top having 1520 (L) X 900 (W) X 760 (H) using 18mm thick

BWP plywood & 25mm & 50mm X 12mm Teakwood patti,

formica, handle, fastening & fixture including cost of all

material & Labours with drawer & shutter, inside white colour

inner sunmica sheet etc.complete as per drawing or directed

by Engineer in charge.

19 STORAGE WITH LAMINATE FINISH Providing, fixing, 140.10 13632.73 Smt

installation at site. Side and back storage unit 450 deep made

out of 18mm thick plywood IS 310 grade and back of the side

unit is of 8mm ply puthi unit is provided with vertical and

horizontal devisions as per design with drawer sand shutters,

lock able with all handware like auto hinges, tower bolt,

magnetics catcher, handle and lock of approved quality. The

cabinet should be raised 75/100 mm above floor. Inside

MM thickness balancing laminate. Exposed outside surface

finished with 1MM thickness standard grade laminate of

approved design and make. All exposed edges finished with

first quality Teak wood beadings to be finished in hard high

gloss PU coating as per drawing and direction of Architect/

Engineer in charge. (MR)

20 High Back Chair Providing and supplying Revolving High 3.00 31260.87 Nos

Back Chair HOF Model No. ZEB-541. Knee tilt synchro

mechanism with multi position locking arrangement and SS

finished arm rest with PU Pad. specially designed anti top

plealuminium diecast base, class-3 gas lift for seat hight

adjustment & glass filed nylon castors for smooth movement,

45 DC mouled cusion inseat and back for better comfort. The

chair include pneumaticsea theight adjustments. The sheet

and back should be covered with approved genuine leather

and PU leather finish. The cost including loading, unloading

and Transportation Charges ect. As per choice of users

department and Concern officers incharge as directed by the

Architect/ Engineer. {For Office of the Vice Presidents,

Executive Engineers and Conferance Room.}

21 Medium Back Chair Providing and supplying Revolving 30.00 6204.18 No

medium Back Chair HOF Model No. MAR 1002 M. Kneetilt

synchrome chanism with multi position locking arrangement

and SS finished arm rest with PU Pad. specially designed anti

top ple SS304 grade base, class 3 gaslift for seathight

adjustment & glass filed nylon castors for smooth movement,

45 DC mouled cusion in seat and back for better comfort.

The chair include pneumatic seat height adjustments. The

sheet and back should be covered with approved genuine

leather finish. The cost including loading, unloading and

Transportation Charges ect. As per choice of users

department and Concern officers in chargeas directed by the

Architect / Engineer. (Make :- Godrej , featherlite, HOF)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

22 LOW BACK CHAIR Providing and supplying Revolving 25.00 4853.25 Nos

medium Back Chair HOF Model No. ECO1004 M. Knee tilt

synchro mechanism with multi position locking arrangement

and SS finished armrest with PUPad. specially designed anti

toppleSS 304 gradebase, class-3gas lift for seat hight

adjustment & glass filed nylon castors for smooth

movement, 45 DC mouled cusion in seat and back for better

comfort. The chair include pneumatic seat height

adjustments. The sheet and back should be covered with

approved genuine leather finish. The cost including loading,

unloading and Transportation Charges ect. As per choice of

users department and Concernofficers incharge as directed

by the Architect/ Engineer. (Make :Godrej , featherlite, HOF)

23 Gang Chair 3.00 20402.00 Nos

Providing and fixing 3-seater gong sitter with moulded

foam, with moulded fram with Aluminium casting and metal

waterfall seats, PU I0mm thick pods on seat & back

(chargeoblej, P.C. frome & wifh perforation. as per

orchf/ecfs selecfion,qnd complete the work scitisfocforily os

per instruction of architect or EngineerJn charge.

24 Providing and fixing of single brief Computer table of size 28.00 25250.00 Nos

1.20 x 0.6O mt. and side storage with 3 drawers and

shutters of width 0,45 mt os per drawings,modesty pannel

and insfructions provided, usIng ply of brand greenply

ecofech mr,cenfury sainik mr.srg etc,or aluminium pipe for

framing and finishing if with 1 mm unicore laminate and

architect(basic rate of unicore laminate is 3000 per sheet

ond ofher I mm laminate is 2000 per sheet, ol size 8'0 x

4’0)incIuding all material, insfallaffon,m.s fabrication work

with powcfer coafing,foboc/r and hordware, clrawer channels

,hinges, handles, keYboard trofIey, cpc/ trolley.ca6Ie

monager,cob/e frunking syst€'m €2fC wasfe of maferiaIs,

pofish work as per insfrucfions etc and complete the work

satisfactorily as per instruction of ocñ/fecf or Engineer-in

25 Providing and Fixing 6mm thick Korean for table top including 7.20 9516.22 Smt

all material and Labour etc complete as per Instruction of

engineer inchorge.

26 SINGAL FACE MOBILE UNIT- As per Attached Technical+ 1.00 85850.00 Nos

C77 Specification, with 4 LEVEL MAKING 5 STORAGE

CO:APARTMENT VERTICALLY. With BASE FRAME in

Welded constructions and using 12 BAND shelves Having

General size of Each BAY ofCOMPACTEOR UNIT: I 180(L)

x4S0(D) x 2130 mm HI. as per the technical specification of

this tender.. (MAKE: COMPRESS/ GODREJ/ HA WORTH or

Equivalent)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

27 SLOTTED ANGLE RACKS 6.00 6565.00 Nos

Providing. Supplying and Firing the storage Racks in Slotted

Angle 40X40mm wight 2.5kg per peice and 5 nos. of

adjustable selves MS sheet with 5 Selves weight 3kg each

and depth 38mts having heavy duty. sfrengh, durability.

completely reusable system and obsolute adjustobi8ty.

Fittings should be perfect and Rack should be in proper

slotted angle as per shown in drawing. Entire Rack should be

made and suppled as per Engineer-In-Charge and

Consultant instructions. The framing for Open file rack shall

De made using vertical members 40mm x 40mm x 2mm

thick slotted angle with synthetic enamel colour etc. The

framing shall be fixed with approved nuts and bolts. The

MW. section as specified or required shall be out square and

to correct length as per drawings and design. The cut

exposed end to views shall be finished smooth. No two

pieces shah be welded olherwise jÒnted. To make up fhe

required length of members except as indicated in drowings

or as directed

28 Cutting out cracks of roof terrace to V- section, cleaning out, 200.00 68.49 Smt

wetting, grouting with cement and sands slurry 1 : 3 (

cement 3- Sand )

29 Providing and laying coloured glazed tiles of the size 300 mm 48.80 1487.88 Smt

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement

30 Providing & Fixing cast iron Spun Nahni trap of the following 2.00 634.17 Nos

nominal diameter of self cleaning design with C.I screaed

down or higned grating including cost of cutting and making

good the walls and floors 100mm inlet and 50mm outlet ©

100mm Dia.

31 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 1292.19 Nos

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight. (i)

Square mouth traps. (A) 100mm x 100mm size P type.

32 Providing & Fixing wall hung W.C. pan with integral "p"or "S" 2.00 5722.14 Nos

trap including. plastic seat cover including jointing . The trap

with soil pipe in cmement morter 1:1 (1.cement :1.fina sand)

vitrious chaina pattern including fixing of chromiun. plated half

turn flush cock of 25mm dia. complete.

33 Providing and fixing screw down bib taps of following size.(B) 4.00 186.83 Nos

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

34 Providing and fixing chromium plated brass half trun flush 4.00 263.77 Nos

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

35 Providing laying and jointing in true line and level 15mm dia. 25.00 72.65 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

make PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

36 Pro.& fixing 18 m thick Black granite partition both side 6.00 2043.92 Smt

laminated & full round moulded on edge with fixing in wall

with all labour material etc. complete.

37 Providing, laying and jointing in true line and level 160 25.00 834.38 Rmt

diametre U.P.V.C (Type B) conforming to IS 13592-

with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost

of all materials.

38 Providing and fixing wash basin (Hindware, Perry, Cera or 2.00 1906.88 Nos

equivalent approved quality) with single hole for pillar tap with

C.I. or M.S. brackets painted white including cutting holes

and making good the same including fittings such as 15 mm

pillar tap, chromium plated bottle trap, C.P. brass waste pipe

and 15 mm stop cock, M.I. fisher union (ii) Flat back wash

basin 550mm x 400mm size including all necessary pacca

fittings etc. complete as directed.

39 Providing and fixing 600mm x 450mm bevelled edge mirrror 2.00 859.41 Nos

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

40 Providing & fixing wall hung urinal With squating plate 1.00 1818.00 Nos

pattern coloured earthenware of approved size and approved

brand like Cera, Hindware or eqavalent icluding conecting the

urinal waste pipe icluding etc complete.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

41 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 105.00 485.81 Pt.

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete.Cat-III (Make:- Honeywell, L&T, Hi-Fi, Indoasian,

42 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 58.00 674.68 Pt.

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed..(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III (Make:- Honeywell,

L&T, Hi-Fi, Indoasian, Legrand)

43 Point wiring for Individual Plug with & earth wire of 1.5 10.00 510.05 Pt.

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat-III (Make:- Honeywell,

L&T, Hi-Fi, Indoasian, Legrand)

44 Point wiring for on board Looped Plug with 6A Modular type 39.00 257.55 Pt.

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories.Cat-III (Make:-

Honeywell, L&T, Hi-Fi, Indoasian, Legrand)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

45 Providing following type of Modular Type Accessories 9.00 160.59 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11

Telephone Socket[A] For One Gang Cat.III (Make:-

Honeywell, L&T, Hi-Fi, Indoasian, Legrand)

46 Providing following type of Modular Type Accessories 1.00 160.59 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat-III (Make:- Honeywell, L&T, Hi-Fi,

Indoasian, Legrand)

47 Providing following type of Modular Type Accessories 39.00 25.25 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate

Single Cat.III (Make:- Honeywell, L&T, Hi-Fi, Indoasian,

48 Providing following type of Modular Type Accessories 52.00 160.59 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-

45 socket Cat-III (Make:- Honeywell, L&T, Hi-Fi, Indoasian,

49 Providing following type of Modular Type Accessories 12.00 180.70 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat-III (Make:- Honeywell, L&T, Hi-Fi, Indoasian,

50 Providing following type of Modular Type Accessories 12.00 199.98 Ea

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat-III (Make:- Honeywell, L&T, Hi-Fi,

Indoasian, Legrand)

51 Providing and erecting ISI mark Medium class RIGID PVC 1098.00 33.33 Mtr.

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

52 Providing and erecting ISI mark Medium class RIGID PVC 10.00 54.54 Mtr.

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (c) 32 mm

53 Providing & erecting PVC Corrugated Flexible Conduit with 20.00 21.21 Mtr.

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (2) 25 mm

54 Providing & erecting PVC Corrugated Flexible Conduit with 10.00 27.27 Mtr.

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes. (3) 32 mm

55 Supplying and laying UPVC cable trunking system comprising 95.00 428.24 Mtr.

unplasticised polyvinyl, chloride rigid material with ignition

free and flame proof confirming BS with necessary end caps

Internal and external bend, flat bends, coupler, tee etc.. All

necessary accessories and measuring of following sizes (2)

100 mm x 50 mm trunking

56 Providing and erecting Mains with 1.1 KV grade FRLS PVC 735.00 62.62 Mtr.

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm (Make: -RR Kabel,

Havells, Avocab, Adcab, KEI, Johnson)

57 Providing and erecting Mains with 1.1 KV grade FRLS PVC 1088.00 82.82 Mtr.

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm (Make: - RR Kabel,

Havells, Avocab, Adcab, KEI, Johnson)

58 Providing and erecting Mains with 1.1 KV grade FRLS PVC 56.00 180.79 Mtr.

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories (G)

wire 4 sq. mm (Make: -RR Kabel, Havells, Avocab, Adcab,

KEI, Johnson)

59 Supplying and erecting Flexible PVC insulated multi strand 82.00 22.22 Mtr.

multi core 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. (c) 1.00 Sq.mm 2 core round/

flat PVC sheathed

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

60 Providing & Erecting approved make following size of TV Co- 45.00 62.62 Mtr.

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made

of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. e).RG-

61 Supplying & erecting approved make Telephone Cable 225.00 20.20 Mtr.

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured 2)

62 Supplying & erecting approved make LAN cable of following 1040.00 47.47 Mtr.

size in existing pipe as per direction [C] CAT -

63 Providing & erecting main Distribution (MDF) indoor type, 1.00 994.85 Ea

back mounted frame as per DoT standard approved with

krone strips (a) Suitable for 10 pair

64 Supplying & erecting M.S. Box having 16 Gauge painted with 2.00 88.88 Ea

red oxide or Heavy duty PVC box erected flushed on wall or

concealed in wall with necessary plastering & finishing as

directed of following size. (c) 200 mm x 250 mm x 75 mm

65 Providing & erecting Switch board for Computer or electric 52.00 1133.22 Ea

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III (Make:- Honeywell,

L&T, Hi-Fi, Indoasian, Legrand)

66 Decorative call bell Ting-tong box type 250 volts complete 10.00 71.71 Ea

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

67 Supplying and erecting LED indoor fittings with LEDs of 94.00 758.51 Ea

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.95, THD

< 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % (fitting required

LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

the ranges shown.) (A) Square/ Circular shaped Surface/

Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KV

Cat-III (Make:- Wipro, LT, Philiphs,Havells, Jaquar,

Greatwhite)

68 Providing and erecting Miniature circuit breaker single pole 24.00 112.11 Ea

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

69 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 737.30 Ea

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(B.) for 63 Amp. Cat-III (Make:- Indoasian, L&T (LK), ABB,

Schneider)

70 Providing and erecting Sheet Steel powder coated MCB 2.00 2913.85 Ea

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to

be used) suitable for (B) three phase incoming and single

phase horizontal type outgoing Per phase isolation type (PPI)

(b) sheet steel double door (ii) 6 way (Make:- Indoasian, L&T

(LK), ABB, Schneider)

71 Providing and erecting Approved make RCCBs conforming to 6.00 2235.13 Ea

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected

as directed (iI) 40 Amps.DP Cat. III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

72 Providing and erecting Annealed bare Copper wire 8 to 16 5.00 794.87 Kg.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

73 Supplying & erecting earth pit of minimum bore dia.150mm 1.00 4591.46 Ea

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2% (C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to 440V

in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

74 Providing and erecting Approved make Ceiling fan with 58.00 1596.81 Ea

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton, Havells, Orient)

75 Supplying and erecting 19 / 20 mm. nominal bore Medium 58.00 108.07 Mtr.

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and earthing.

76 Providing Fan clamp of 30 x 5 mm flat of required length & 10 58.00 98.98 Ea

mm M.S. Bolt & Nuts erected with necessary hook of 10 mm

M.S. Round Bar.

77 Supply, Installation, Testing & Commissioning of 9U (550W X 2.00 13546.12 Ea

600D)MM Wall mount closed rack with PDU, Horizontal

Cable manager, self, mounting hardware and cooling fan with

standard accessories. UL Certified. Racks should be

manufactured by ISO9001:2015, ISO14001:2004 & OHSAS

18001 : 2007, DIN41494 and Equivalent EIA/ISO/EN /CEA

Certified company and should have proper EHS Policy.

Total Rs.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

Rupees SeventyOne Lakh Six Thousand Five Hundred Three and Paisa Ten Only

I / We / am/are willing to carry out the work at ________________________________% above / below percent

(should be written in figure and words) of the estimated rates mentioned above. Amount of my/our tender

Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs.12140.00 must be recovered from Contractor's

respective R.A. Bill.

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Himatnagar Himatnagar