Infrastructure work releated with Distribution Sub-Station Network in Mumbai at BEST Under RDSS

SUPPLY OF EQUIPMENTS

Supply of Normal VCB TYPE A:- 11kV, 250 MVA, Indoor, fault making, load breaking, Non-trip, Vacuum circuit breaker (Horizontal isolation and horizontal draw out type) with voltage transformer suitable for distribution automation along with spares and accessories.

Supply of Normal VCB Type B:- 11kV, 250 MVA, Indoor, fault making, fault breaking, Vacuum circuit breaker (Horizontal isolation and horizontal draw out type) suitable for distribution automation along with spares and accessories.

Supply of Normal VCB TYPE C: -11kV, 250 MVA, Indoor, fault making, load breaking, Bus coupler VCB (Horizontal isolation and horizontal draw out type) suitable for distribution automation along with spares and accessories.

Supply of Normal VCB TYPE D:-11kV, 250 MVA, Indoor, fault making, fault breaking, Metering vacuum circuit breaker (Horizontal isolation and horizontal draw out type) with Metering Voltage Transformer suitable for distribution automation along with spares and accessories.

Supply of Compact VCB TYPE A:- 11kV, 250 MVA, Indoor, fault making, load breaking, Non-trip, Vacuum circuit breaker (Horizontal or vertical isolation and horizontal draw out type) with voltage transformer suitable for distribution automation along with spares and accessories.

Supply of Compact VCB Type B:- 11kV, 250 MVA, Indoor, fault making, fault breaking, Vacuum circuit breaker (Horizontal or vertical isolation and horizontal draw out type) suitable for distribution automation along with spares and accessories.

Supply of Compact VCB TYPE C: -11kV, 250 MVA, Indoor, fault making, load breaking, Bus coupler VCB (Horizontal or vertical isolation and horizontal draw out type) suitable for distribution automation along with spares and accessories.

Supply of Compact VCB TYPE D:-11kV, 250 MVA, Indoor, fault making, fault breaking, Metering vacuum circuit breaker (Horizontal or vertical isolation and horizontal draw out type) with Metering Voltage Transformer suitable for distribution automation along with spares and accessories.

2 NOS OF SWITCHGEAR EARTHING G. I. WIRE 55 SQ.MM.(7/11 SWG) WITH 120SQMM AL LUGS AT BOTH ENDS WITH AVERAGE EARTHING WIRE OF 25 METERS (INCLUDING BOTH EARTHINGS) AT EACH DSS

RMU 3-WAY ( 1 ISO + 1 T-OFF+ 1 FDR.)

RMU 4-WAY ( 1 ISO + 1 T-OFF+ 2 FDR.)

RMU 4-WAY ( 1 ISO + 2 T-OFF+ 1 FDR.)

11KV/415V 630KVA DRY TYPE DISTRIBUTION TRANSFORMER

11KV/415V 630KVA (MINERAL OIL) DISTRIBUTION TRANSFORMER

11KV/415V 1000KVA DRY DISTRIBUTION TRANSFORMER

11KV/415V 1000KVA OIL DISTRIBUTION TRANSFORMER

11KV/415V 1600KVA DRY DISTRIBUTION SUBSTATION

11KV/415V 1600KVA OIL DISTRIBUTION SUBSTATION

11KV/6.6KV 3000KVA (MINERAL OIL) AUTO TRANSFORMER TYPE DISTRIBUTION SUBSTATION

CT’S HT 100/60-5 FOR 1600KVA TRFS ALONG WITH INSTALLATION

DWC HDPE PIPES 150 MM DIA.

SUPPLY OF CABLES & RELATED MATERIAL

FRLS CABLE SUPPLY 4C*2.5SQMM

LV 1C X 400 SQ. MM.XLPE CU.

11KV CABLES 3C*240 SQMM, XLPE, AL

11KV CABLE 3C*50SQMM, CU, XLPE

1.1KV 4C X 300 SQ. MM.XLPE AL

R.C.C. TILES FOR 11KV CABLES

SUPPLY OF 600 MM (+5%) CASING HDPE PIPE INCLUDING TRANSPORTATION, JOINTING, HANDLING, ETC. AT SITE

SUPPLY OF 160 MM HDPE PIPE INCLUDING TRANSPORTATION, JOINTING, HANDLING, ETC. AT SITE

SUPPLY AND INSTALLATION OF CABLE MARKERS AT BOTH THE ENDS OF RAILWAY BOUNDARIES AT 8 LOCATION, (2 NOS AT EACH LOCATION)

R.C.C. TILES FOR LT 1.1KV, 4C×300 SQ.MM. AL, XLPE CABLE

JOINTING & TERMINATION MATERIAL SUPPLY

1.1 KV LV 1C X 400 TERMINATION

11 KV 240/ 300 SQMM/3C, XLPE/PILC, AL HEAT SHRINKABLE TERMINATION KITS.

11 KV 50/70 SQMM/3C, CU/AL, XLPE HEAT SHRINKABLE TERMINATION KITS

1.1 KV, 4C×300 SQ.MM, HEAT SHRINKABLE TERMINATION KIT SUITABLE FOR ALUMINUM CONDUCTOR, DRY CURED, WATER SWELLABLE XLPE CABLE

1.1KV, 4C×300 SQ.MM. AL, XLPE CABLE HEAT SHRINKABLE STRAIGHT JOINTING KIT WITH MECHANICAL CONNECTOR SUITABLE FOR 1LT

11KV 240/ 300 SQMM/3C, XLPE/PILC, AL HEAT SHRINKABLE/EPOXY JOINTING KITS.

11KV, 3C×240 SQ.MM, HEAT SHRINKABLE STRAIGHT JOINTING KIT WITH MECHANICAL CONNECTOR SUITABLE FOR ALUMINUM CONDUCTOR, DRY CURED, WATER SWELLABLE XLPE CABLE

11KV, 3C×240 SQ.MM, HEAT SHRINKABLE TERMINATION KIT SUITABLE FOR ALUMINUM CONDUCTOR, DRY CURED, WATER SWELLABLE XLPE CABLE

Replacement of HV Weak/Old cable to improve the quality of supply (Rs 0.80 Cr per Km RI considered)

DISMANTLING OF EXISTING SWITCHGEARS, BACK TO BACK HT CABLE ARRANGEMENT INCLUDING MATERIAL COST, TRANSPORT OF OLD SWITCHGEARS TO BEST STORES IN MUMBAI

INSTALLATION, TESTING & COMMISSIONING OF SWITCHGEAR INCLUDING EARTHING, TRANSPORTATION TO SITE & MISC MATERIAL USED FOR INSTALLATION OF SWITCHGEARS

DISMANTLING OF EXISTING RMU, BACK TO BACK HT CABLE ARRANGEMENT INCLUDING MATERIAL COST, TRANSPORT OF OLD RMU TO BEST STORES IN MUMBAI

INSTALLATION, TESTING & COMMISSIONING OF RMU INCLUDING EARTHING, TRANSPORTATION TO SITE & MISC MATERIAL USED FOR INSTALLATION OF RMUS

DISMANTLING OF EXISTING TRANSFORMER INCLUDING TRANSPORT OF OLD TRANSFORMER TO BEST STORES IN MUMBAI

INSTALLATION, TESTING & COMMISSIONING OF NEW TRANSFORMER INCLUDING EARTHING CONNECTION, TRANSPORTATION TO SITE & MISC MATERIAL USED FOR INSTALLATION OF TRANSFORMERS

CABLE LAYING SERVICES

FRLS CABLE LAYING FOR COMMISSIONING OF DSS AND DSS EQUIPMENTS

EXCAVATION AND MAKING TRENCHES INCLUDING BREAKING EXISTING ASPHALT WITH PROPER BARRICADING, BACKFILLING & REMOVAL OF DEBRIS AFTER BACKFILLING

EXCAVATION AND MAKING TRENCHES INCLUDING BREAKING EXISTING PAVER BLOCKS/CHEQUERED TILES/BLACK STONE OR SIMILAR SURFACE WITH PROPER BARRICADING, BACKFILLING & REMOVAL OF DEBRIS AFTER BACKFILLING

LAYING OF HV CABLE PER RUNNING METER IN TRENCHES WHICH INCLUDES LAYING OF PIPES WHEREVER REQUIRED, PULLING OF CABLE (THROUGH EXCAVATED TRENCHES OR PIPES), BEDDING (BY SAND OR SIEVED EARTH) & TILING

RATE FOR LAYING OF HV CABLE BY HDD/TRENCHLESS TECHNOLOGY FOR CROSSING MAIN ROADS/JUNCTIONS WHICH INCLUDES DRILLING, LAYING OF PIPE WHEREVER REQUIRED, PULLING OF CABLE, BEDDING & TILING

DRILLING BORE BELOW THE RAILWAY TRACK BY HORIZONTAL DIRECTIONAL DRILLING (HDD) TRENCHLESS TECHNOLOGY OR BY OTHER EQUIVALENT METHOD AND LAYING OF HDPE 600 MM (+5%) PIPES THEREIN.

LAYING OF HDPE PIPE OF 160 MM INSIDE 600 MM (+5%) CASING HDPE PIPE.

PULLING LV/HV/EHV CABLES THROUGH 160 MM HDPE PIPES LAID UNDER THE RAILWAY TRACK IN A 600 MM (+5%) CASING HDPE PIPE.

EXCAVATION & MAKING OPEN TRENCHES FOR HDPE PIPE & CABLE LAYING BY OPEN TRENCHING METHOD WHICH INCLUDES BREAKING OF EXISTING FOOTPATH OR CEMENT CONCRETE RCC/ASPHALT AT THE JUNCTION/NEARBY RAILWAY & MCGM BOUNDARIES OR BENEATH PRIVATE PREMISES WITH PROPER BARRICADING, LAYING OF PIPES WHEREVER REQUIRED, PULLING OF CABLE, BEDDINGS, TILING, BACKFILLING, REMOVAL & DISPOSAL OF DEBRIS FROM THE SITE IN THE AREA OF ELECTRIC SUPPLY DISTRIBUTION OF THE BEST UNDERTAKING, MUMBAI AT VARIOUS LOCATIONS

LAYING OF LV CABLE PER RUNNING METER IN TRENCHES WHICH INCLUDES LAYING OF PIPES WHEREVER REQUIRED, PULLING OF CABLE (THROUGH EXCAVATED TRENCHES OR PIPES), BEDDING (BY SAND OR SIEVED EARTH) & TILING

RATE FOR LAYING OF LV CABLE BY HDD/TRENCHLESS TECHNOLOGY FOR CROSSING MAIN ROADS/JUNCTIONS WHICH INCLUDES DRILLING, LAYING OF PIPE WHEREVER REQUIRED, PULLING OF CABLE, BEDDING & TILING

MAKING OF JOINTS & TERMINATIONS

SERVICE FOR MAKING OF LV 1C X 400 TERMINATION

SERVICE FOR MAKING OF 11 KV 240/ 300 SQMM/3C, XLPE/PILC, AL HEAT SHRINKABLE TERMINATION

SERVICE FOR MAKING OF 11 KV 50/70 SQMM/3C, CU/AL, XLPE HEAT SHRINKABLE TERMINATION KITS

SERVICE FOR MAKING OF 11KV 240/ 300 SQMM/3C, XLPE/PILC, AL HEAT SHRINKABLE/EPOXY JOINTING KITS.

1.1KV, 4C×300 SQ.MM. AL, XLPE CABLE HEAT SHRINKABLE STRAIGHT JOINTING KIT WITH MECHANICAL CONNECTOR SUITABLE FOR 1

1.1 KV, 4C×300 SQ.MM. ALUMINUM CONDUCTOR, HEAT SHRINKABLE TERMINATION KIT SUITABLE FORDRY CURED, WATER SWELLABLE XLPE CABLE

SERVICES FOR MAKING OF 11KV, 3C×240 SQ.MM, HEAT SHRINKABLE STRAIGHT JOINTING KIT WITH MECHANICAL CONNECTOR SUITABLE FOR ALUMINUM CONDUCTOR, DRY CURED, WATER SWELLABLE XLPE CABLE

KEI industries Limited

MEGHA ENGINEERING AND INFRASTRUCTURES LIMITED