Construction of Auditorium/Multipurpose Hall at V.C.S.G. Uttarakhand University of Horticulture and Forestry, Bharsar (Pauri Garhwal)

Amount

Providing and fixing bib cock of approved quality: Providing and fixing brass bib cock of approved quality (jaguar/parryware) : 15 mm nominal bore (push type as per approved of Eng. In charge

Providing and fixing C.P. brass angle cock/ valve for basin mixer , geyser points or to other simitar fittings of approved quality conforming to IS:8931(Jaguar/Parryware) :15 mm nominat bore(Push type as per approval of E-in CHARGE

Providing and fixing C.P. brass Pillar cock of approved quality in wash basin or other fittings as per requirement conforming to IS:8931(Parryware/Jaguar) :15 mm nominai bore(Push type as per approval of E-in CHARGE)

Providing and fixing cast brass Floor Clean Out plug with suitable insert keys for opening, male threaded joint with G.l. socket lead caulked to soil pipe / waste pipe of C.I. and C.I.(LA) pipe as required Complete as per intrucation of the Engineer in charge 100 mm Dia

Providing and fixing Floor Drain as per re uirernent 100mm x 50mm

Providing and fixing Floor trap P type/ S type as per requirement complete with GI Hopper etc. 100mm Dia

Supply, Installation,Testing Commissioning .of 2 Nos. support arms and backrest mount at fixed height for handicap toilet as required.

Supply,InstalIation,Testing and Commissioning .of raised toilet seat with cover for handicap toilet. (Make Parryware/Jaguar or approved by engineer in charge

SITC in positon of adjustable type white vitreous china wash basin for handicapped complete with tracks (lR 4360-Commander or equivalent) with C.I./M.S. brackets painted white, 32 mm C.P. brass waste, C.P. brass chain with rubber plug, 32mm dia C.P. cast brass bottle with extension piece, wall flanges and union complete including cutting and making good the walls floors wherever required.

Supply,(nstallation,Testing Commissioning .of 35 mm dia powder coated steel grab L-SHAPED CORNER RAiL(80bMM+800MM) (for handicapped toilet).

Providing and fixing of Health Foucet complete with all accessories including divertor, angle valve etc required for for complete successful commissioning.

Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed Idly filled armoured telecommunication cable as per specifictaion 5 pair armoured riser cable of 0.60 mm Dia copper conductor

Supply and installation, testing and commissioning following size KRONE make tecephone tag block in tockabfe 16 gauge sheet medium duity PVC enclosure complete as reqüired. 5 Pair Krone type tag block

Supply of Cob Downfighter 42 watt/4000 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 4000 system lumens PF>0.95, HD<IO%, CRI>80, Sheet Thickness .8mm, Average Life 40000hrs @L70 ith fixing clamps, nut, bolts and ixing arrangement with both side of xisting MS pipe (in case of hanging complete accessories all respect and s directed by engineer in charge., ake Philips RS271B LED40/830 PSUWB WH or eqivalent as per pproved make

Supply of Downiighter 22 watt/2000 lumens suitable for Polycarbonate diffuser & aiuminium heat sink complete suitable for recessed Mounting, complete in atl respect 2000 system lumens PF>0.95, THD<IO%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing camps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charges, Make Philips DN 395B LED20S-6500 PSU WH or eqivalent as per approved Make

Supply of Downlighter 12 watt/1200 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for recessed Mounting, complete in all respect 1200 system lumens PF>095, THD<IO%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories at! respect and as directed by engineer in charge., Make Philips DN 3933 LED12S-6500 PSU WH or eqivalent as per approved make

Supply of mirror lighte 10 watt/1150 lumens suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for Surface Mounting, complete in all respect 1150 system lumens PF>095, THD<IO%, CRI>80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN 021 LED10S-6500 PSU GR S1 or eqivalent as per approved make

Suppiy of 1200 rrtn sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLOC) Motor, class of insulation: B, 3 nos. blades, 30 cm tong down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS 374-2019), THD less than 10%, remote or electronic regulator unit for speed controi and all remaining accessories including safety pin, nut bots, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required, in case of rode length exceed more that 30 cm then fixing clamps, nut, bolts and fixing arrangement with both side in existing steel conduit/MS pipe as directed by engineer in charge.

Supply of Exhaust fan 300 mm sweep metal body with 50 HZ 230 volt ac complete with all respective Accessories

PANEL-I - Supplying, installation, testing & commissioning of modular, fulfr/ bolted type, sectionallised Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard JEC 61439- 1 &2 as Total Type Tested Assembly and of suitable size fabricated in compartmentalized design with CRCA sheet steel of 2mrn thick for load bearing member and 1.6mm for Non load bearing member. 3mrn thick for grand plates. i/c cleaning & finishing complete with 9 tank process (automatic PT spray) for powder coating in approved shade, having suitable rating capacity extensible type TPN Aluminium bus bars of high conductivity as per BOQ bus bar supports, with short circuit withstand capacity of 50kA for 1 Sec., bottom base frame of 3mm thick (multifold design), fabrication shall be done in trasportabie sections, entire LENGTH panel Shali have a common earth bar INCOMER: 1 nos. 100A 415M, tcs=lcu=lcw=25KA, 4P MICCB with MP release with LCD display having O/C, S/C , G/F Over temperature and neutrai failure protection, release should have minimum 10 Nos fault history for diagnosis of fault, Make: Legrand (DMX)/ Schneider (Masterpact ) /Siemens (3WL), L&T Upower omeoa. 1 nos digital type multi function meters V+A+Hz) with cast resin CTs 100/5A Make egrand/Siemens/schneider/L&T 1 Set of phase indicating tamp with MCB 1 No. IOOA, 4pole onload changeover switch. Busbar 125A TPN Bus bar of aluminimum attoy. outgoing 02 nos. 63A, 415V, FP MCB 6 nos. 40A, 415V, 4P MCB of 10ka 5 nos. 32A, 230V, 2P MCB of IOWA 1 No. APFC Relay suitable for controlling of 6 Nos relay output MCB./MCCB for protection, Contactors as per AC6 Duty for automatic switching, having auto manual switch and indication for each step.

Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables confoming to relevant IS code and technical specification. 2CX10 SQMM AL ARMOURD CABLE

Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables confoming to relevant IS code and technical specification. 4CX10 SQMM AL ARMOURD CABLE

Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables confoming to relevant IS code and technical specification. 3.5Cx35 SQMM AL ARMOURD CABLE

Supply of LED street light fitting not more than 30W having System Efficacy >120 1m/W, system output >3600Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having toughned gfass/PC with Impact resistance IK07. LED driver should be Fully metal body Potted & Encapsulated , BE compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare and confirming standard IEC60598. Including suitable size Gl pipe bracket clamps, nut, bolts and washers complete atl as directed. Make : PHILIPS cat. part no. BRP046 LED 36 CW MR Sl PSU GR or eqivalent as per approved make

supply of 5,0 Mtr Height Galvanized Iron Octagonal Poles having uniformly tapered polygonal shape throughout the length with straightLongitudinal welding in a single shaft. There shall not be any circumferential welding. Dimensions:Top Dia:. 70mm, ottom Dta.: 130mm, Thickness 3mm dBase plate 200*200*12 mm. Dimension of Foundation Bolts Length 600mm, Dias 24mm &04 Nos. Bolts manufactured from special steel along with nuts, washer, anchor plates & Templates. SingleArm of 0.5 Mt7, Shall be provided atong with — MAKE PHILIPS or eqiva;ent as pr approved make.

Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical Inspectorate.

Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side.

Supplying & fixing in position 1.1 kv rubber hand gloves.

Supplying of first aid box as approved by St. John Ambulance Brigade/lndian Red Cross conforming to IS : 2217 - 1963.

Supplying of basic Electrical and mechanical maintenance tool kit as per direction of engineer in charge.

Supply and erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connection complete.

So;pply Olld fixing of 6 Zone Conventional Fire Alarm Control Panel Pone( Operating Voltage :AC 220v 501% tt10%, DC 24v 1 amp Operating Temperature too C to 50 9 (176)C Operating Humidity :95% (noncondensing) Hooter output :2A (24v DC) ,EOL :4k7 ohm, 1 per Zone, Construction :1.8mm CRCA sheet duly powder Coated 16 * 2 character LCD Display Extra potential free contact for fire & fault ,Aut0 dialer connectivity facility Inbuilt battery charger & battery space facility Beset, alarm cancel, lamp test feature ,Zone wise test and isolation facility ,Protected from Hi-voltage, over-load, short-circuit, Zone wise LED indications'for fire; .. open and short

Supply and fixing of High intensity Sounder with mounting base.

Providing , installation , testing & commissioning of Glass Break Type Manual Catl Point

Supply and installation of ABC powder stored pressure type portable fire extinguisher IS marked 15683- 2006 & ISO 9001, complete as required capacity - 6Kg Make: easefire/Minimax/Omex

Supply and installation of C02 type fire extinguisher IS( marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5kg Make: Ceasefire/Minimax/Omex

Supply and installation of Mechanical Foam (AFFF) type fire extinguisher 13 marked steel body 15683- 2006 & ISO 9001, complete as required capacity - 9 Itr Make: Ceasefire/Minimax/Omex

Supply,instaltation of fire Bucket as per IS spacification with stand (holding four bucket). Make: Ceasefire/Minimax/Omex

Bidder Name

Amount

ASTHA TRADERS(GSTN-NA)

BIJENDER SINGH CONTRACTOR(GSTN-NA)

ASTHA TRADERS

ASTHA TRADERS