S.R.to All Barrack, existing External Drainage System of cell 1,2 & 3 in District Jail and Construction of Parking Shed in Jail Staff Qtrs at Junagadh,Dist:Junagadh. [Including Electrical Works]

Name of Work : S.R.to All Barrack, existing External Drainage System of cell

& 3 in District Jail and Construction of Parking Shed in Jail

Staff Qtrs at Junagadh,Dist:Junagadh. [Including Electrical

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and

approximate cost put to tender for Rs.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

1 Excavation for foundation upto 1.5 Mt. depth including sorting out 100.00 Cum 210.42 Rupees Two Hundred

and stacking of useful materials and disposing of the excavated Ten And Paise Forty

stuff upto any lead & Lift.(A)Loose or Soft Soil Two Only

2 Excavation for foundation upto 1.5 M. depth incluing sorting out 462.00 Cum 269.87 Rupees Two Hundred

and stacking of useful materials and disposing of the excavated Sixty Nine And Paise

stuff of any lead & Lift. [B] Dense or Hard Soil Eighty Seven Only

3 Excavation for foundation upto 1.5 Mt. depth incluing sorting out 16.00 Cum 527.63 Rupees Five Hundred

and stacking of useful materials and disposing of the excavated Twenty Seven And

stuff of any lead & Lift. (D) Soft Rock Paise Sixty Three Only

4 Removing & Scraping of old deteriorated plaster of any thickness 5090.00 Sqm 19.69 Rupees Nineteen And

from wall/R.C.C. member including stacking of serviceable Paise Sixty Nine Only

material and disposal of unserviceable from site of work with all.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

5 Dismantling tile or stone floors laid in mortar including stacking of 275.00 Sqm 48.63 Rupees Forty Eight And

serviceable materials and disposal of unserviceable materials Paise Sixty Three Only

with all lead and lift.

6 Dismantling sanitary fittings like wash basin,w/c pan indian and 50.00 No 410.13 Rupees Four Hundred

European type, flusing tank etc including stacking of serviceable Ten And Paise Thirteen

materials with all lead and lift. Only

7 Demolition and including Stacking of servicable material and 4.00 Cum. 1071.63 Rupees One Thousand

disposal of unserviceable materials with all lead and lift. (ii\) Seventy One And Paise

R.C.C. work. Sixty Three Only

8 Demolition and disposal of unserviceable materials with all lead 15.00 Cum. 616.85 Rupees Six Hundred

and lift. (ii) Cement concrete. Sixteen And Paise

Eighty Five Only

9 Dimolation of brick work and stone masonary including stacking 45.00 Cum. 557.32 Rupees Five Hundred

of unserviceable material and disposing of unserviceable Fifty Seven And Paise

material with all lead and lift (1)cement mortar Thirty Two Only

10 Dismentling G.I. Pppes,C.I. pipes ,G.S.W.pipes and A.C. rain 467.00 Rmt 75.92 Rupees Seventy Five

water pipes with fittings and clamps including stacking the And Paise Ninety Two

materials with all lead and lift ( for any dia, of pipe) Only

11 Dismantling of PVC Pipe,U PVC Pipe and Cpvc pipe for any dia... 115.00 Rmt 20.00 Rupees Twenty Only

with all lead and lift.

12 Cleaning the Sluge of Old Septic Tank Size 5.00 x 2.15 5.00 Each 15000.00 Rupees Fifteen

13 Cleaning the Sluge of Old Septic Tank Size 4.15 x 2.15 4.00 Each 12000.00 Rupees Twelve

14 Credit Value for PVC Pipe,U PVC Pipe and Cpvc pipe ….etc 115.00 Rmt -10.00 Rupees Ten Only -1150.00

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

15 P & L ordinary Cement Concrete 1:2:4 ( 1 cement ; 2 coarse 19.50 Cum. 3767.61 Rupees Three Thousand

sand; 4 graded stone aggregate 20mm nominal size) including Seven Hundred Sixty

finishing smooth and curing complete, including cost of formwork Seven And Paise Sixty

but excluding cost of reinforcement. For Foundation and plinth. One Only

16 Providing and laying cement concrete 1:2:4 ( 1 cement ; 2 coarse 525.00 Sqm 335.72 Rupees Three Hundred

sand; 4 graded stone aggregate 20mm nominal size) laid in one Thirty Five And Paise

layer and finished with floating coat of neat cement (50 mm Seventy Two Only

17 Providing and laying cement concrete 1:4:8 (1-cement;4-coarse 69.80 Cum 2742.27 Rupees Two Thousand

sand;8-hand broken stone aggregate of 40mm nominal size) and Seven Hundred Forty

curing complete excluding cost of formwork in foundation and Two And Paise Twenty

plinth. Seven Only

18 Providing and Laying TMT bar Fe 500 reinforcement of approved 660.00 kg 76.52 Rupees Seventy Six And

brand by GSPHC only for RCC work including cutting, bending, Paise Fifty Two Only

binding and placing in position etc. comp.for all floors

19 Providing & laying controlled cement concrete M- 250 2.50 Cum 4722.49 Rupees Four Thousand

and finishing smooth with curing etc.complete including the cost Seven Hundred Twenty

of formwork of plywood only with fair finish & Proping must be of Two And Paise Forty

steel only so as to give a fair finish but excluding the cost of Nine Only

reinforcement for R.C.C. work in Foundation Footing for any

cross sectional area at Rate are also Inclusive Of Providing &

Mixing Plastisizer Of Approved Make & In Proportion As per mix

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

20 Providing & laying controlled cement concrete M- 250 and 1.50 Cum 9363.25 Rupees Nine Thousand

finishing smooth with curing etc.complete including the cost of Three Hundred Sixty

formwork of plywood only with fair finish & Proping must be of Three And Paise Twenty

steel only so as to give a fair finish but excluding the cost of Five Only

reinforcement for R.C.C. work in COLUMNS UP TO PLINTH for

any cross sectional area at Rate are also Inclusive Of Providing

& Mixing Plastisizer Of Approved Make & In Proportion As per

21 Providing & laying controlled cement concrete M- 250 and 1.50 Cum 7318.48 Rupees Seven

finishing smooth with curing etc.complete including the cost of Thousand Three

formwork of plywood only with fair finish & Proping must be of Hundred Eighteen And

steel only so as to give a fair finish but excluding the cost of Paise Forty Eight Only

reinforcement for R.C.C. work in Plinth Beam for any cross

sectional area at Rate are also Inclusive Of Providing & Mixing

Plastisizer Of Approved Make & In Proportion As per mix design.

22 Brick work using common burnt clay building bricks having 5.00 Cum 4172.60 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in foundation and One Hundred Seventy

plinth in cement mortar 1:6 (1-cement;6-coarse sand), Two And Paise Sixty

Conventional bricks. Bricks with frog only shall be used. Only

23 Filling in foundation and plinth with murrum or selected soil in 65.00 Cum 298.79 Rupees Two Hundred

layers of 20 cm. Thickness including watering,ramming and Ninety Eight And Paise

consolidating etc.complete. Seventy Nine Only

24 FILLING in plinth with SAND under floors including watering, 4.00 Cum 477.03 Rupees Four Hundred

raming consolidating and dressing etc. complete. Seventy Seven And

Paise Three Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

25 Providing and applying Bonding agent for grip between old & 270.00 Sqm 371.39 Rupees Three Hundred

new concrete by Sikadur 32 or its equivalent as approved by Seventy One And Paise

engineer in charge. Rates are inclusive of surface preparation Thirty Nine Only

such as cleaning surfaces. Mixing components of Sikadur

together with a slow-speed electric drill with properly designed

impeller until a smooth consistency is achieved. Mix shall be

applied by brush, roller or spray.

26 Providing and applying Micro concrete in existing RCC 6.00 Cum. 62188.93 Rupees Sixty Two

members micro concrete shall be of Perma recrete - 306 or its Thousand One Hundred

equivalent from ROFF, FOSROCK, BASF or SIKKA as approved Eighty Eight And Paise

by engineer in charge (Of 60 MPA at 28 days). Rates are Ninety Three Only

inclusive of cleaning the surface, remove loose materials,

applying Sikka Rust off 100 or its euivalent to existing

reinforcement. Preparing microconcrete as per instruction of

manufacturer required form work and scaffolding and filling

microconcrete in required places etc complete.

27 Providing 10 mm thick cement PLASTER in single coat on 1006.00 Sqm 220.13 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in C.M. Twenty And Paise

1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat Thirteen Only

of neat cement slurry at GROUND FLOOR.

28 Provinding 15 mm thick cement PLASTER in single coat on 2344.00 Sqm 220.46 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even and Twenty And Paise Forty

smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with Six Only

floating coat of neat cement slurry at GROUND FLOOR.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

29 Provinding 20 mm thick SAND FACED cement PLASTER on 1802.00 Sqm 339.02 Rupees Three Hundred

walls above ground level consisting 12 mm thick backing coat of Thirty Nine And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock finishing coat of Two Only

C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.

30 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water 147.00 Rmt 323.15 Rupees Three Hundred

pipe as Per IS-13592 of 90mm Dia. Complete with Special Twenty Three And Paise

Flings, Compressor type Fittings like G.I. Slotted Z patti of 16 Fifteen Only

Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp

with Washer Nut at every 1.50mt. vertical distance including All

Labour Charges etc. complete including making good the

Ceilings, Floors and on terrace. Rain water pipe shall be 90 mm

Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the

end near by Ground level. Rate are Inclusive of all Necessary

Fittings required for ALL FLOORS.

31 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil 130.00 Rmt 264.97 Rupees Two Hundred

Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Rate Sixty Four And Paise

inclusive of All fittings like single or double 'Y' with door, reducer, Ninety Seven Only

coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with

Washer Nut at every 1.50mt. vertical distance including All

Labour Charges etc. complete and making good the Wall, Ceiling

32 Provinding and fixing in position PVC COWEL VENT to pipe 75 31.00 No 16.47 Rupees Sixteen And

mm dia directed. Paise Forty Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

33 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil 141.00 Rmt 495.91 Rupees Four Hundred

Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Rate Ninety Five And Paise

inclusive of All fittings like single or double 'Y' with door, reducer, Ninety One Only

coupler single 'T' with door bend, G.I. Slotted Z patti of 16 Gauge

(minimum1.60mm thick) and minimum 6mm dia. U Clamp with

Washer Nut at every 1.50mt. vertical distance including All

Labour Charges etc. complete and making good the Wall, Ceiling

34 Provinding and fixing in position PVC COWEL VENT to pipe 110 37.00 No 28.16 Rupees Twenty Eight

mm dia directed. And Paise Sixteen Only

35 Providing and fixing Concealed center point to wall, ceiling and 106.00 Rmt 206.73 Rupees Two Hundred

floor CPVC pipes SDR-13.5 PIPE having national sanitation Six And Paise Seventy

foundation (NSF) seal for potable waterof following dia nominal Three Only

bore tube fitting and clamps including making good the wall,

ceiling and floor etc..complete. [B] 20 mm inner dia.

36 Providing & fixing to Concealed center point to wall, ceiling & 65.00 Rmt 251.31 Rupees Two Hundred

floor CPVC ( SDR 13.5 ) PIPE having National Sanitation Fifty One And Paise

foundation ( NSF ) seal for potable water of following dia nominal Thirty One Only

bore tube fitting and clamps including of making good the wall

ceiling & floor etc. Complete (C) 25mm Dia

37 Providing & fixing to Concealed center point to wall, ceiling & 120.00 Rmt 443.29 Rupees Four Hundred

floor CPVC ( SDR 13.5 ) PIPE having National Sanitation Forty Three And Paise

foundation ( NSF ) seal for potable water of following dia nominal Twenty Nine Only

bore tube fitting and clamps including of making good the wall

ceiling & floor etc. Complete (excavation of earth in trenches and

filling will be paid separately) (E) 40mm Dia

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

38 Providing and laying Ceramic tiles (Anti Skid) 8 mm thick in 84.00 Sqm 891.38 Rupees Eight Hundred

flooring treads of steps and landing laid on a bed of 12mm thick Ninety One And Paise

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush Thirty Eight Only

pointing in white cement.

39 Providing and laying Ceramic tiles 8mm thick in riser of steps 200.00 Sqm 1079.52 Rupees One Thousand

and dado on a bed of 10mm thick cement mortar 1:3 (1-cement Seventy Nine And Paise

: 3-coarse sand ) finishing with white cement slurry. Fifty Two Only

40 Providing and laying 25mm thick mirror Polished (Dimond Cut) 56.00 Sqm 1108.30 Rupees One Thousand

Kota Stone Slab Flooring over 20mm thick base of cement One Hundred Eight And

mortar 1:6 ( 1 cement : 6 coarse sand) laid over & jointed with Paise Thirty Only

grey cement slurry including rubbing & polishing etc. Complete as

Directed By Engineer In Charge For All Floors.

41 Provinding and fixing CPVC SWR Nahni Trap of the following 24.00 No 580.47 Rupees Five Hundred

nominal dia. Self cleaning design with top jali and stainer Eighty And Paise Forty

including cost of cutting and making good the walls and floors Seven Only

100mm inlet and 50mm outlet. Including 150mm x 150mm

stainless steel jali.

42 Providing and fixing water closet squatting pan (Orissa type 26.00 No 1338.77 Rupees One Thousand

W.C. pan) first quality with UPVC S trap of 100 mm including Three Hundred Thirty

jointing the trap with UPVC Pipe (size 580mm X 450 mm in Eight And Paise Seventy

vitreous china white colour).Rate also includes making holes in Seven Only

RCC slab / Beam and fixing the trap in hanging position by M.S.

clamps of required size fitted in ceiling .

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

43 Providing & Fixing 15mm One way Bib Tap with Wall Flange. 48.00 No 990.61 Rupees Nine Hundred

Rate are inclusive of all matreials, Labour & Necessary Fittings Ninety And Paise Sixty

etc. Complete as per Detailed Drawings, Specifications and as One Only

per the Instruction of Engineer In charge. The Model & Make of

Bib Tap Shall be as per the Approved Make List of GSPHCL.

44 Providing & fixing S.W. gully trap without grating brick masonary 24.00 No 1176.94 Rupees One Thousand

chamber & water tight C.I. Cover of size 300 mm x 300mm size One Hundred Seventy

with standard weight (1) square mouth trap 150mm x 100mm size Six And Paise Ninety

"P" or "R" type. Four Only

45 Constructing Brick Masonary Chamber for underground C.I 144.00 No 3793.18 Rupees Three Thousand

inspection chamber and bends with brick having crushing Seven Hundred Ninety

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab 1:2:4 Three And Paise

mix (1 cement : 2 coarse sand :4 graded stone aggregate 20mm Eighteen Only

nominal size ) with 8mm dia steel at 15 cm. C.C and foundation

concrete 1:5:10 inside plaster 15mm thick with a flotting coat of

neat cement walls and bed concrete etc. complete. Rate are also

inclusive of outside plaster 15mm thick in C.M 1:3 from top of

chamber and all side upto 45cm deep for multi Or Single purpose

pipe line. (With RCC Cover With Frame HD20 Size 600*450mm)

46 Extra over above item for additional depth of 0.1 m or part 518.00 No 239.99 Rupees Two Hundred

thereof beyond 450mm depth for brick masonary chamber for Thirty Nine And Paise

(I) 610 x 455 Ninety Nine Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

47 Consrurting Manhole with RCC TOP SLAB IN 1:2:4 mix (1 4.00 No 12566.69 Rupees Twelve

cemente :2 corarse sand :4 graded stone aggregate 20mm Thousand Five Hundred

nominal size ) found . Concrete 1:3:6 ( 1 cement :3 corarse sand Sixty Six And Paise Sixty

: 6 brick bats 40 to 50mm size ) inside plastering 15mm thick with Nine Only

c.m 1:5 ( 1 cement : 5 corase sand ) finish with a floating coat of

neat cement making channaels in cement concrete 1:2:4 (

1cement : 2 Coarse sand : 4 stone aggregate 20mm nominal

size) finished smooth complete including curing & testing (i)

inside size 900mm x 1200mm including with 230mm thick wall of

brick masonary using brick having crushing strenghth not less

then 35 kg/Sqcm in c.m 1:5 for multipurpose pipe line (A- type

depth 0.90mt. for multipurpose line ) Rate are also Inclusive of

Providing & fixing precast RCC cover.

48 Extra rate for constructing B.B. masonary for every additional 24.00 No 517.78 Rupees Five Hundred

depth 0.10 mt. Or part thereof over item (i) for depth from Seventeen And Paise

0.90mt to 1.50mt. Seventy Eight Only

49 Providing & Fixing Precaste R.C.C.Frame with Cover MD 10 41.00 No 1702.00 Rupees One Thousand

Ton(Rubber Mould Finish) inner size 600 x 450mm with All Seven Hundred Two

Neccery Fittings. Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

50 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of 46.00 Rmt 229.00 Rupees Two Hundred

Class SN8 Structured Wall polyethelene Piping systems (Pipe Twenty Nine Only

with online/offline coupler and elastomeric sealing ring) with non-

smooth External Annular Corrugated and Smooth Internal

Surfaces (Double Wall) for non-pressure underground Sewerage

& Drainage application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental

stores etc. complete. (100mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with

one end of pipes, sliding over the elastomeric sealing rubber ring

placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient, depth

& alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per

drawing, specifications & detailed engineering, including carriage

of pipes & fittings from site stacks to the place of laying etc. as

per direction of Engineer-in-charge.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

51 Providing, supplying and fixing Corrugated DWC HDPE Pipes of 987.00 Rmt 396.00 Rupees Three Hundred

Class SN8 Structured Wall polyethelene Piping systems (Pipe Ninety Six Only

with online/offline coupler and elastomeric sealing ring) with non-

smooth External Annular Corrugated and Smooth Internal

Surfaces (Double Wall) for non-pressure underground Sewerage

& Drainage application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental

stores etc. complete. (150 mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with

one end of pipes, sliding over the elastomeric sealing rubber ring

placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient, depth

& alignment ,testing the water tightness of the joints, ensuring the

continuity tests of specified pipe segments etc. complete as per

drawing, specifications & detailed engineering, including carriage

of pipes & fittings from site stacks to the place of laying etc. as

per direction of Engineer-in-charge.

52 Providing & Laying (to level & slopes) and jointing reinforced 115.00 Rmt 429.98 Rupees Four Hundred

concrete light duty,non pressure pipes I.S. class NP/2 of 300mm Twenty Nine And Paise

dia. With collars and butt ends prepared for collar joints including Ninety Eight Only

testing of joint etc.complete

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

53 Scrubbing of existing colour and Painting two coats ( Excluding 195.00 Sqm 99.26 Rupees Ninety Nine And

priming coat ) on previously painted steel and other material Paise Twenty Six Only

surfaces with enamel paint brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

54 Scrubbing of existing colour and Painting two coats ( Excluding 1425.00 Sqm 115.56 Rupees One Hundred

priming coat ) on previously painted wood and wood based Fifteen And Paise Fifty

surfaces with enamel paint brushing to give an even shade Six Only

including cleaning the surface of all dirt, dust and other foreign

55 Distempeing (two coats) with oil bound distemper of approved 3355.00 Sqm 83.20 Rupees Eighty Three

brand and manufacture and of required shade on Ceiling And Paise Twenty Only

surface to give an even shade, over and including a priming coat

with distemper primer of approved brand and manufacture after

thoroughly mortar droppings and other foreign matter and also

including preparing the surface even including lapi finishing and

sand papered smooth.

56 Distempeing (two coats) with oil bound distemper of approved 7060.00 Sqm 74.93 Rupees Seventy Four

brand and manufacture and of required shade on wall surface to And Paise Ninety Three

give an even shade, over and including a priming coat with Only

distemper primer of approved brand and manufacture after

thoroughly mortar droppings and other foreign matter and also

including preparing the surface even including lapi finishing and

sand papered smooth.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

57 Finishing walls with Weather Proof Exterior Emulsion Paint on 5170.00 Sqm 153.35 Rupees One Hundred

Wall Surfaces (Two Coats) over and above Applying one coat of Fifty Three And Paise

Primer to give an Required shape and even shade after Thirty Five Only

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials etc. complete. Primer and Exterior

Emulsion Paint shall be used as per approved material list of

58 Removing dry or oil bound distemper by a washing and 2350.00 Sqm 13.08 Rupees Thirteen And

scraping and sand papering the Ceiling surface smooth Paise Eight Only

including necessary repairs to scratches Complete

59 Removing dry or oil bound distemper by a washing and 8080.00 Sqm 11.42 Rupees Eleven And

scraping and sand papering the wall surface smooth including Paise Forty Two Only

necessary repairs to scratches Complete

60 Providing & Laying Damp Proof Suprema white on Terrace 3515.00 Sqm 409.30 Rupees Four Hundred

Surfaces (Two Coats) over and above Applying one coat of Nine And Paise Thirty

Primer to give an Required Cleaning of Terrace and Open old Only

vata of china mosaic after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials etc.

complete. Primer and Damp Proof shall be used as per approved

material list of GSPHCL or Engineer Charge. The whole terrace

so finished shall be flooded with water for a minimum period of

two weeks for curring for final taste. Rate is including ten years

performance of guarantee bond to be given on stamp paper.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

61 Providing and fixing pre-cast concrete Kerb Stone of grey 350.00 Rmt 371.21 Rupees Three Hundred

Cement based concrete block 30cm length,30cm height and Seventy One And Paise

15cm thick of M-250 grade concrete as per approved design and Twenty One Only

including excavation for fixing in proper line and level , filling the

joint with CM 1:3 ( 1 cement : 3 fine sand ) etc complete.

62 Construction of Concrete Road using Tremix system M - 300 19.00 Cum. 4649.03 Rupees Four Thousand

concrete with providing and fixing & removing of "C" channel as Six Hundred Forty Nine

per required level, slope and thickness of concrete road. Floor And Paise Three Only

levelling of placed concrete with surface vibrator, Vacuum suction

pump for dewatering, finishing the surface with power floater and

light roughening the surface as directed with providing expansion

joint of size 20 x 190mm & filling the expansion joint having size

20mm x 20mm by using colpar 200 or equivalent as per

manufacturer specification with making 3 mm construction joint

by cutting concrete road using concrete cutter machine at every

meter length on entire width including curing etc. complete as per

directed by Engineer - In - Charge.

63 Steel work, welded in built up sections framed work includig 14.00 Quntl 9018.30 Rupees Nine Thousand

cutting, hoisting, fixing in position and paint. (A) In Beams and Eighteen And Paise

joints, channels angles Tees, flats, with connectiog plates or Thirty Only

angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like. Structural Steel

material should be used ISI marked only.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

64 Providing and Corrugated JSW Pre coated sheet 0.06 mm 178.00 Sqm 984.37 Rupees Nine Hundred

roofing fixing with galvanised iron J or L hooks, Bolts and nuts Eighty Four And Paise

8mm Diameter with bitumen and G. I. Limpet washer or G. I. Thirty Seven Only

Limpet washer with white lead complete excluding the cost of

Purlins, Rafter and trusses. (0.60mm thick)

65 A Providing & erecting Point wiring with approved ISI marked 1.1 210.00 Point 425.00 Rupees Nine Hundred

KV grade 2 X 1.5 sq.mm. copper PVC insulted FRLS wire with Eighty Four And Paise

1.5 sq.mm. (green) copper PVC insulated FRLS wire for earth Thirty Seven Only

continuity in FIA approved ISI mark medium class white colour

20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution erected on brick wall along with approved

make 5/6 Amp. ISI mark modular type switch and accessories

mounted in 20 G. G.I. company fabricated metallic box/PVC

Box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary modular lamp holder / modular

ceiling rose / HD Connector (make & model approved by EIC and

matching colur with switches accessories) as directed for

concealed wiring Deep Junction box 75mm depth if required) (a)

Light point. Cat.-II (For Open Wiring).

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

[Length of point wiring must not increase than 10 mtr. For that

necessary switch board and their location must be finalised

before execution by agency otherwise payment will not be done

for extra long point. For future extention, if required, agency has

to erect one higher size polished wooden box as per instruction

of EIC & Wire must be having box packing]. For Light point

[conductor resistance should be as per IS:8130/1984]

65 B For Bell Point Cat.-II 30.00 Point 425.00 Rupees Nine Hundred

Eighty Four And Paise

Thirty Seven Only

65C For Fan Point (with 6 A. Modular type switch and two module 160.00 Point 612.00 Rupees Nine Hundred

hum free EME Five step type Electronic fan regulator both having Eighty Four And Paise

ISI mark) Cat.-II Thirty Seven Only

65D For separate Point (with 6 Amp. Switch & 3/5 pin socket both 44.00 Point 455.00 Rupees Nine Hundred

having ISI mark) Cat.-II Eighty Four And Paise

Thirty Seven Only

65E For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket 132.00 Point 234.00 Rupees Nine Hundred

both having ISI mark) Cat.-II. Eighty Four And Paise

Thirty Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

66 Providing and erecting Medium Class FIA approved and ISI mark 350.00 Mtr. 24.00 Rupees Nine Hundred

white colour (embossed) RIGID PVC PIPES of following size Eighty Four And Paise

complete erected with necessary PVC fittings & Junction boxes Thirty Seven Only

fixed with adhesive solution & clamps on / in wall / ceiling along

with continuous fish wire to draw mains with necessary fittings

and junction boxes for following dia. (a) 20 mm. dia.

67 A Providing and laying Mains with FRLS PVC Insulated wire ISI 1700.00 Mtr. 62.00 Rupees Nine Hundred

marked 1.1 KV grade with FIA approved ISI mark medium class Eighty Four And Paise

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed Thirty Seven Only

with adhesive solution to be erected on brick wall /Slab with FRLS

PVC insulated wire for earth continuity. (Approved ISI make only)

[a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor

mains with 1.5 sq.mm. FRLS copper multi stranded conductor

for earthing as per standard colour code. (Conductor resistance

should be as per IS:8130/1984)

67 B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 580.00 Mtr. 146.00 Rupees Nine Hundred

2.5 sq.mm. FRLS copper multi stranded conductor for earthing Eighty Four And Paise

as per standard colour code. Thirty Seven Only

68 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated 50.00 Mtr. 37.14 Rupees Nine Hundred

Flexible pipe with necessary socket, PVC bushes, saddle, Check- Eighty Four And Paise

nuts etc. complete of following sizes. Thirty Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

69 Providing and erecting Plug Point wiring with approved ISI make 10.00 Point 678.00 Rupees Nine Hundred

2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Eighty Four And Paise

sq.mm (green) copper PVC insulated FRLS wire for earth Thirty Seven Only

continuity in white FIA approved ISI mark medium class

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting with

approved make white accessories with FRLS PVC insulated wire

for earth continuit with 16 Amp. ISI marked flush type modular

switch / Socket and accessories erected on PVC / Acrylic box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. For open wiring [a] 16 A.Indicator switch & 1 No. 6/16

A. universal socket combined white colour suitable for 3 pin top

duly. Cat.-II. (Conductor resistance should be as per

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

70 Providing & Erecting 2.0 mtr long Earthing system by making 2.00 Each 7025.00 Rupees Nine Hundred

minimum bore of 225 mm dia in soft soil. Suitable for doing pipe- Eighty Four And Paise

in-pipe technology earthing.Earthing electric rod must be made Thirty Seven Only

from Corrosion free Hot dip galvanizing pipes having following

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B '

Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum

O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm

X 100mm length, Terminal Should be made from inner pipe for

that pipe must be pressed and gave rectangular shape so its

work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron

any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia.

hole must be provided at terminal. total minimum Weight(approx.)

of earth electrodewith inside conductive material minimum

should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:-

ohm/meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

(C) Back fill Compound:- Earthing compound should be capable

to retain moisture for long time Back Filling Compound weight is

25 Kg. (D) Chamber and cover:- Earthing chamber should be size

of 400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm X

mm thick. Necessary test report must be submitted. 1. Short

circuit test by ERDA/ CPRI for 25KA 2. Resistivity test of

conducting material from NABL accredited lab. 3. Hot dip

galvanised / zinc coating micro test from reputed laboratory.

General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying] [Water must be poured in bore before

starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency

has to maintain earthing & its value for one year. Earthing must

be done in the presence of A.E. (GSPHCL)]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

71 Providing & Erecting 1.0 mtr long Earthing system by making 3.00 Each 5785.00 Rupees Nine Hundred

minimum bore of 225 mm dia in soft soil. Suitable for doing pipe- Eighty Four And Paise

in-pipe technology earthing.Earthing electric rod must be made Thirty Seven Only

from Corrosion free Hot dip galvanizing pipes having following

specification. (A) Earthing Electrode: outerpipe:- 88 mm minimum

O.D., ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:-

mm minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep

galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:-

2 no.with washer suitable for 14mm dia. hole must be provided at

terminal. total minimum Weight(approx.) of earth electrodewith

inside conductive material minimum should be 16 kg. (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2% (C) Back fill Compound:- Earthing

compound should be capable to retain moisture for long time

Back Filling Compound weight is 15 Kg. (D) Chamber and cover:-

Earthing chamber should be size of 400 mm X 400 mm X

mm depth and Cover should be heavy duty cast iron with required

size of 300 mm X 300 mm X 4 mm thick.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited

lab. 3. Hot dip galvanised / zinc coating micro test from reputed

laboratory. 4. General test report from OEM regarding

specification of earthing. [Make and model approved by EIC

Strictly subject to item specification only] [OEM has to submit all

detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing

value must be measured with earth tester. Agency has to bring

the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing

& its value for one year. Earthing must be done in the presence

of A.E. (GSPHCL)]

72 For above earthing additional charges for boring in hard rock soil 5.00 Each 276.00 Rupees Nine Hundred

(by breaker) & filling soft soil in earth pit (certificate for soil have Eighty Four And Paise

to given by DEE / AE along with photographs) Thirty Seven Only

73 Providing and erecting Polycarbonet body surface mounting LED 6.00 Each 780.00 Rupees Nine Hundred

Bulk head type 9 watt Lighting Fitting with electronic driver having Eighty Four And Paise

THD < 15%, CRI>80, P.F.0.95 And lumen output from luminaire Thirty Seven Only

720 lm, input voltage range 160-270 V AC, 50 Hz cool white

(3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20

deg C to + 60 deg C working temperature, AL frame with Beam

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

74 A Providing and erecting following type of Modular Type 42.00 Each 139.00 Rupees Nine Hundred

Accessories mounted with 20 G G.I. company fabricated metalic Eighty Four And Paise

box, single mounting base frame covered with textured / metallic Thirty Seven Only

front plate, modules erected with necessary connection. As

desired by Engineer in charge. TV Co-axial Socket outlet Cat-II.

74 B For Blank Plate Single Cat-II 50.00 Each 16.00 Rupees Nine Hundred

Eighty Four And Paise

Thirty Seven Only

74 C Modular Indicating Call Bell. Cat.-II. 30.00 Each 326.00 Rupees Nine Hundred

Eighty Four And Paise

Thirty Seven Only

74 D Modular Buzzer. Cat.-II. 30.00 Each 148.00 Rupees Nine Hundred

Eighty Four And Paise

Thirty Seven Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

75 Supplying and Erecting LED indoor fitting of approximately 4feet 144.00 Each 370.00 Rupees Nine Hundred

long with LED of wat age 0.2W to 0.5W assemble on single Eighty Four And Paise

MCPCB with housing use as a heat sink shall be made from Thirty Seven Only

Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following

specification: (A) Company mark/name on the fitting.(B) Rated

input voltage and frequency: 220V to 240 VAC ; 50Hz. (C) Rated

input wattage: max. 24w (D) Rated input current : 0.2 Amp, (E)

Power Factor : Min. 0.90, (F) ATHD : Max. 15% , (G) Rated

Luminous flux: Min. 2420 lm, (H) CCT: 6500K, (I) CRI: Min. 80Ra,

(J) Driver Ef iciency: Min. 80%, (K) LED life span: Min. 50000 Hrs

@ L70, (L) Over Voltage protection: Withstand up to 440V/AC for

4 Hrs., (M) Surge protection : Min. 2KV, (N) IP rating: IP 20, (O)

IK rating : IK 02, (P) Short circuit , Open circuit & Reverse Polarity

Protection must be provided (Q) Fixing clamp design & strength

should be suf icient to hold the fitting erected on wall or ceiling.,

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

76 Supplying and erecting 8 W LED lamps with following wattage 56.00 Each 111.00 Rupees Nine Hundred

capacity of 220 to 240 voltage, minimum 15000 burning hours Eighty Four And Paise

life, 500 V in built-surge protection,Polycarbonate diffuser, Thirty Seven Only

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)

LED Lamps integral type, with PC diffuser suitable Lamp holder.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

77 Providing, erecting, testing Ceiling Fan confirming to IS: 155.00 Each 1929.00 Rupees Nine Hundred

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Eighty Four And Paise

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Thirty Seven Only

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum 330, (6)

Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No.

of heavy duty premium quality Ball bearing: Two, (9) Total Body:

Top & Bottom should be alluminium, (10) Blade: Aluminium

approx 1.1 mm thick, (11) Colour: White high grade powder

coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min

1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium body

premium quality, Branded make,(14) Down road: up to 1.0 mtr as

per site requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration and

noise due to mechanical parts. (Agency has to erect safey wire

with ceiling fan and checked with EIC) (OEM has to approved

model as per tender specification and tested at ERDA)

(Necessary test reports should be submitted strictly at the time of

approval. Sample approved by EIC subject to above specification

78 Supplying and erecting approved make double ball bearing 5.00 Each 2329.00 Rupees Nine Hundred

oscillating type Medium duty bracket fan with aluminium Eighty Four And Paise

blade A.C. 230 V. 50 cy/s 400 mm sweep wall mounted with Thirty Seven Only

height adjustment and rotary tilting device complete with guard,

flexible Core plug top complete erected with lead wires as

directed. (Crompton Make High Flow model or make & model

approved by EIC)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

79 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar 10.00 Each 125.00 Rupees Nine Hundred

bounded to the RCC bars up to 50 mm Length each side & Eighty Four And Paise

piereced through 18 Gauge G.I Box having 125 mm dia depth of Thirty Seven Only

75 mm complete erected concealed in ceiling with necessary

modular plate / sheet.

80 Providing & Erecting Fan clamp of 30 x 5 mm flat of required 155.00 Each 98.00 Rupees Nine Hundred

length & 10 mm M.S. Bolt & Nuts erected with necessary hook of Eighty Four And Paise

10 mm M.S. Round Bar. Thirty Seven Only

81 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. 80.00 Rn.Mt 107.00 Rupees Nine Hundred

pipe / M.S. pipe down rod erected duly painted for fan complete r. Eighty Four And Paise

with necessary 24/0.2 flat 3 core flexible Core with earthing. [The Thirty Seven Only

down rod thikness, hole, locking arrangement, construction,

poweder coating, colour shed should be same as original down

rod brought with ceiling fan. For that agency has to give original

down rod sample to fabricator and one sample down rod should

be approved with EIC. After approval given by EIC, agency can

use the down rod as per approved sample. If without approval

down rod will be erected on site, agency has to replace them with

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

82 Providing & erecting weather proof, dust & vermin proof, floor 3.00 Sq. 16230.00 Rupees Nine Hundred

mounted front operated indoor type cubical panel board having IP- Mtr. Eighty Four And Paise

42 & above protection as per approval from engineer incharge Thirty Seven Only

and made from 2 mm. thick CRC M.S. sheet for outer body &

doors, 1.6 mm. thick CRC M.S. sheet for internal partitions with

necessary supporting angles, flats including skirting, bending,

drilling, welding, riveting with internal partitions & cable alley as

per requirements & instruction of engineer-In-Charge with

erection of supplied switchgears, busbars with suitable size of

interconnecting PVC copper wire / Copper-Aluminium strips,

rubber gromets, rib, control wires, backelite control fuses,

measuring instruments, earth bus & earth bolts, foundation flange-

bolts-base plates, sufficient nos. of hinged doors, handle with

locking arrangement, rubber gasket complete with Required Nos.

heavy Duty Connector with Cadmium plated nut and bolt for Anti

The panel shall be supplied with Seven Tank chemical process

which shall be carried out before applying painting, painted with

powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be measured excluding base

beams) The standard companies switch gear shall be used and

only manufacturers at CPRI approved factory as per IEC

and shall be certified by that company whose switch gears are

used after fabrication for beneficial use. With 350 mm depth

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Panel manufacturer have to give 3 years maintenance and

service support if in case of breakdown or fault. Panel

manufacturer have to submit electrical meter calibration report.

Agency should design the panel in such a way that there should

not be any excess in panel area (sq.mtr) & length of bus-bar

(mtr), if any excess occurs draw attention to GSPHCL at the time

of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Picture of it to be submitted in running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by

agency's engineer before giving order. If found any problem in

size discuss with GSPHCL engineer for rectification before giving

order. [Including Necessary numbering / marking on PANEL done

with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC

on site as per requirement] (All Panel as per IEC 61439 as per

NBC Guideline) [Manufacturer must be of Gujarat state so

three stage inspection can be done]

83 Providing & erecting Approved make Four pole moulded case 1.00 Each 7976.00 Rupees Nine Hundred

circuit breaker having breaking capacity ICU of 35 K.A. at 415 V Eighty Four And Paise

having normal current rating 125 A. with variable/Fixed thermal Thirty Seven Only

& magnetic release suitable to work on A.C.supply 50 c/s. with all

internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% ICU Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

84 Providing and erecting Approved make Four pole moulded case 3.00 Each 6112.00 Rupees Nine Hundred

circuit breaker having breaking capacity ICU of 25 K.A. at 415 Eighty Four And Paise

V, having normal current rating up to 25 A to 100 A. with Thirty Seven Only

variable/Fixed thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only.

85 Supplying & Erecting Approved Make Extended operating 4.00 Each 865.00 Rupees Nine Hundred

rotary handle with pad lock with three position Trip, Off, On Eighty Four And Paise

suitable for 25 Amp. to 250 Amp. panel mounting. (Company Thirty Seven Only

Must be same company of switchgear)

86 Providing and erecting busbar chamber confirming to IS-375 2.00 Rmt 4378.00 Rupees Nine Hundred

fabricated from 16 GMS sheet dust & vermin proof having hinged Eighty Four And Paise

door with rubber gasket and necessary busbar supports with Thirty Seven Only

copper busbar having current density not more than

amp/sqmm (Rated current per Cross Section area) duly wired

with colour insulating tape for phase sequence, three phase &

neutral Each equal & one meter long suitable for following current

capacity with necessary painting mounted on wall or pedestal

frame of required size with necessary incoming and outgoing

connections with proper size of copper strip/wire with lugs as

directed. Suitable for 100 Amp. capacity having cross section

area not less than 250 sq.mm. [make and model approved by

EIC strictly as per tender specification]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

87A Supplying and erecting tripple pole & neutral 440V / 500 V Panel 1.00 Rn. 1942.00 Rupees Nine Hundred

mounting Copper Busbars with four equal Nos. of electrolyte Mtr. Eighty Four And Paise

bus having current density not more than 1.6 Amp. / sq.mm Thirty Seven Only

(Rated current / cross section area) duly wraped with colour

insulating tape for phase sequence of following current carrying

capacity, erected with necessary bus bar supports / insulators,

main cable socket to each bar, erected in existing cubical panel

with necessary connections.For electrolyte copper busbars

Suitable for 100 Amp. capacity.

87B Suitable for 200 Amp. Capacity 1.00 Rn. 3171.00 Rupees Nine Hundred

Mtr Eighty Four And Paise

Thirty Seven Only

88 Supplying and erecting Approved make Earth fault Relay suitable 1.00 Each 4934.00 Rupees Nine Hundred

to mount with inter connection to moulded case circuit breaker Eighty Four And Paise

having CT ratio & MCCB rating as following along with shunt trip Thirty Seven Only

220 V AC with all internal connections & complete erected in

existing M.S.housingFor (2)125 - 200 A, CT Ratio 1/200 [make

and model approved by EIC strictly as per tender specification]

89 Supplying and erecting approved make panel mounting type 1.00 Each 1263.00 Rupees Nine Hundred

Digital Voltmeter having 3 x 1/2 digits LED display, 0 to 750 AC Eighty Four And Paise

Volts range having 0.5 class accuracy erected on existing panel Thirty Seven Only

board with all connection, wiring etc. with manufacturers

calibration certificate. [make and model approved by EIC strictly

as per tender specification]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

90 Supplying and erecting approved make panel mounting type 1.00 Each 1543.00 Rupees Nine Hundred

Digital Ammeter having 3 digits LED display, external CT Eighty Four And Paise

operated, calibrated for 0 to 1000 Amps. suitable to operate on Thirty Seven Only

500 Volt AC, having 0.5 class accuracy erected on existing panel

board with all connection, wiring etc. with manufacturers

calibration certificate. [make and model approved by EIC strictly

as per tender specification]

91 Supplying and erecting Ammeter / Voltmeter selector switch for 1.00 Each 314.00 Rupees Nine Hundred

3 phase AC Supply 500 V on existing panel board with necessary Eighty Four And Paise

connections. [make and model approved by EIC strictly as per Thirty Seven Only

tender specification]

92 Supplying and erecting approved make suitable panel indicator 3.00 Each 43.00 Rupees Nine Hundred

LED type lamp, lens cover, complete erected with necessary Eighty Four And Paise

connections. Thirty Seven Only

93 Providing & erecting L.T. Current Transformer with bar primary 3.00 Each 272.00 Rupees Nine Hundred

50/5 to 1000/5 ratio 15 VA burden having 0.5 class accuracy Eighty Four And Paise

erected in existing CRCA box duly secured with insulating Thirty Seven Only

materials connected to the meter [make and model approved by

EIC strictly as per tender specification]

94 Providing and Erecting of Miniature circuit breaker single 8.00 Each 111.00 Rupees Nine Hundred

pole 6 Amp. to 25 Amp. suitable to operate on 240 V A.C. Eighty Four And Paise

system and having breaking capacity 10 KA to be erected in Thirty Seven Only

existing box. confirming to IS 8828/1996 with ISI Mark.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

95 Providing & erecting 240 V MCB Double pole switch for Motor & 15.00 Each 327.00 Rupees Nine Hundred

Inductive load (C curve) having 10 KA breaking capacity & Eighty Four And Paise

confirms to IS:8828 in Existing M.S. box having following Thirty Seven Only

capacity. For 40 Amp.

96 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 4.00 Each 730.00 Rupees Nine Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS Eighty Four And Paise

:8828 in existing box having following capacity [c] 63 Amp. Thirty Seven Only

97 Providing & erecting 415 V MCB Four Pole for Motor & Inductive 1.00 Each 662.00 Rupees Nine Hundred

Load (C Curve) having 10KA breaking capacity & confirms to IS Eighty Four And Paise

:8828 in existing box having following capacity. 40 Amp. FP Thirty Seven Only

98 Supply, Installation, Testing & Commissioning of Three Phase, 1.00 Each 6319.00 Rupees Nine Hundred

440 V Surge Suppressor protection Device (SPD) & 40 Amp Eighty Four And Paise

TPN MCB (or As per SPD OEM guide line for the protection of Thirty Seven Only

SPD which is erected such a way that it can be operated easily)

SPD must be capable to protect all electrical and electronics

equipments if SPD blast or fuse then the panel builder must have

replace it soon during defect liability period.The Detail

Specification of SPD are As per Attached sheet with Annexture -

A(E). (Hakel,Iskra,OBBO make) (With Five year

Gaurantee/warranty)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

99 Providing ad erecting approved make Three phase Double Door 2.00 Each 3379.00 Rupees Nine Hundred

Horizontal / Vertical type (as per site requirement and EIC Eighty Four And Paise

instruction) outgoing per phase outgoing type (PPI) metal Thirty Seven Only

clad D.B. as per relevant Indian standards amended up to date.

Supplying and fixing following way Three phase MCB distribution

board with company wire links for internal connections having

colour code and with suitable lugs and company fabricated with

sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with

suitable integral single piece construction, tinned copper busbar

and link with all necessary interconnection and with necessary

size GI frame (if required for surface type) for mounting

MCBDB. MCBDB door, Back side and Body of MCBDB must be

made of 1.2 mm thick CRCA Sheet. Manufacturer must be

provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 &

having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link

with isolation & Protecting Cover for 440 Volts on surface / recess

complete with loose wire box, terminal connectors for all incoming

and outgoing circuits, with suitable size FRLS PVC 10 mm2

insulated copper conductor with Pin type lug up to terminal blocks

and internal connection, tinned copper bus bar, 4 nos. tinned

copper neutral link, 4 nos. tinned copper earth bar, din bar-4 nos.,

detachable gland plate, interconnections, including earthing etc.

Three phase incoming and single phase outgoing. Total quantity

of wire link: 13 Nos.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

For Three phase 8 Way Double Door PPI MCBDB (The DBs

should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish

the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

100 Providing ad erecting approved make single phase Double 10.00 Each 4906.00 Rupees Nine Hundred

Door metal clad D.B. as per relevant indian standards Eighty Four And Paise

ammended upto date. Thirty Seven Only

Supplying and fixing following way single phase MCB

distrubution board of company fabricated sheet box with

powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link

with all necessary interconnection and with necessary size MS

frame for mounting MCBDB. MCBDB Door, Back side and Body

of MCBDB must be made of 1.2 mm thick CRCA Sheet.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral

& Earthing link with isolation & Protecting Cover for 240 Volts on

surface / recess complete with loose wire box, terminal

connectors for all incoming and outgoing circuits, with suitable

size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned

copper neutral link, tinned copper earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Single phase incoming and horizontal single phase outgoing. For

12 Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole

ELCB (ELCB confirming to IS:12640/1988 having sensitivity of

30 mA and breaking capacity of 10 KA), 1 no. MCB 40 Amp.

double pole switch (C curve confirms to IS:8828 having breaking

capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 3 Nos.,

Amp:- 3 Nos. & 25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be

used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per

101 Providing and Erecting Approved make ISI mark ELCB 6.00 Each 2213.00 Rupees Nine Hundred

confirming to IS:12640/1988 having serial number printed on it Eighty Four And Paise

and having sensitivity of 30 mA and breaking capacity of 10 KA Thirty Seven Only

and suitable for 240 V, 50 Hz having characteristic of quick acting

& Tripping with all advance feature & do not incorporate any

electronic component (mounted in MCBDB) Suitable for operation

on single phase 240 Volt max rating of (i) For 40 Amp. DP.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

102 Providing and Erecting Approved make ISI mark ELCB 2.00 Each 3010.00 Rupees Nine Hundred

confirming to IS:12640/1988 having serial number printed on it Eighty Four And Paise

and having sensitivity of 30 mA and breaking capacity of 10 KA Thirty Seven Only

and suitable for 240 V, 50 Hz having characteristic of quick acting

& Tripping with all advance feature & do not incorporate any

electronic component (mounted in MCBDB) Suitable for operation

on single phase 240 Volt max rating of (i) For 63 Amp. FP

103 Supplying & fixing box for housing RCCB + MCB combination 15.00 Each 272.00 Rupees Nine Hundred

made of 18 SWG sheet steel duly powder coated with gasket, Eighty Four And Paise

dust & vermin proof bakelite shield two earthing terminals for Thirty Seven Only

following type of RCCB, RCCB + MCB [a] For 2 pole

104 For 4 pole [ Same company metal box used as MCB / ELCB 5.00 Each 442.00 Rupees Nine Hundred

used with earthing terminal with necessary Numbering/ marking Eighty Four And Paise

with oil paint by painter] Thirty Seven Only

105 Providing, erecting, fabricating the M.S. structure as per 100.00 kg 75.00 Rupees Nine Hundred

requirement of site as per structure design Including proper size Eighty Four And Paise

approved by EIC of M.S. angles, flats, bars, square pipe, Thirty Seven Only

channels, sections (Tata, Jindal, Asian, JSI Make) complete with

cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red

oxide metal primer,asian paint make with erection on site as per

direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of

square pipe end must be closed with M.S plate welding. Payment

will be done on KG as per Actual weight.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

106 Supplying & erecting 12 mm thick backelite sheet of approved 3.00 Sq. 2289.00 Rupees Nine Hundred

make and grade on 25 x 25 x 3 mm red oxide painted angle iron Mtr. Eighty Four And Paise

frame suitable for fixing ICDP SWITCH and energy meter Thirty Seven Only

(contractor shall make approved drawing of Bakelite sheet To

arrange required No. of Energy meter & ICDP switch-busbar etc.

as per Actual space available in electrical room at site)

107 Providing and erecting metallic vitrified danger notice board as 4.00 Each 69.00 Rupees Nine Hundred

per language suggested by engineer incharge for MEDIUM Eighty Four And Paise

VOLTAGE installation to be erected as per IS-2551 Thirty Seven Only

108 Supplying and laying UPVC cable trunking system comprising 40.00 Mtr. 424.00 Rupees Nine Hundred

unplasticised polyvinyl, chloride rigid material with ignition free & Eighty Four And Paise

flame proof confirming BS .All necessary accessories and Thirty Seven Only

measuring of following sizes. [1] 100 mm x 50 mm trunking.

(Make & Model Approved by EIC)

109 Providing and Laying of Mains with ISI marked, 1.1 KV grade 100.00 Mtr. 56.00 Rupees Nine Hundred

electrolyte multi stranded, annealed copper conductor with heat Eighty Four And Paise

resistant PVC insulated conforms to IS:694, IEC - 227 erected in Thirty Seven Only

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. [f] One

wire 6.00 sq. mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

110 Providing and Laying of Mains with ISI marked, 1.1 KV grade 40.00 Each 141.00 Rupees Nine Hundred

electrolyte multi stranded, annealed copper conductor with heat Eighty Four And Paise

resistant PVC insulated conforms to IS:694, IEC - 227 erected in Thirty Seven Only

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. [g] One

wire 16.00 sq. mm

111 Supplying and erecting Fabricating terminal box for street light 3.00 Each 702.00 Rupees Nine Hundred

pole made from 16 SWG M.S. sheet having following size Eighty Four And Paise

complete with fixing arrangement for terminal board, with Thirty Seven Only

necessary hole for wire entry and exit from the box. The box shall

be provided with cover and hinges on one side and bolting at

other end The box shall be fixed by clamps fabricated from 25mm

x 6mm flat.The box shall be painted with one coat of red oxide

and two coats of paint having following box size 330 mm x

mm x 140 mm (depth). Providing and fixing Terminal board of

size 5.0 x 127 x 152.4 mm.bakelite sheet with 15 Amp. kitkat

pattern porcelain fuse unit with suitable brass studs with nuts,

washers and clamps of size 25 mm x 3 mm suitable for pole

painted with one coat of red lead paint.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

112 Providing & laying HDPE Double walled corrugated pipes 275.00 Mtr. 117.00 Rupees Nine Hundred

(DWC) (conforming to IS: 16205 (part 24) 2018)) with minimum Eighty Four And Paise

load required of 450N capacity with anti rodent and ultra violet Thirty Seven Only

material properties with necessary connecting accessories of

same material at required depth to be laid 90 cms. under ground

for laying of cable below ground / road surface for enclosing

cable and back filling the same to make ground as per original.

(A) For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test

Certificate to be Submitted)

113 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable 227.00 Mtr. 152.00 Rupees Nine Hundred

multistrand Aluminium conductor for 1.1 KV. to be laid 90 Eighty Four And Paise

cms.Under ground or to be laid on wall with suitable G.I. heavy Thirty Seven Only

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of cables.

[d] 4 core x 16 Sq. mm

114 Providing & erecting XLPE (IS:7098) (I)-88 ISI marked armoured 100.00 Mtr 361.00 Rupees Nine Hundred

Copper cable for 1100 volt to be laid 90 cms. Under ground or to Eighty Four And Paise

be laid on wall with suitable G.I. heavy guage 1.0 mm thick cable Thirty Seven Only

clamp or in existing DWC pipe underground or road crossing or

floor of following size of cables. [a-1] For 4 core x 4 sq.mm.

115 Providing and Fixing of Solderiess crimping type Aluminium Lugs 16.00 Each 15.00 Rupees Nine Hundred

conforming to IS suitable for cable of following size evenly Eighty Four And Paise

crimping with high pressure tool & connected to switchgear Thirty Seven Only

terminals with brass/ cadmium plate nut bolts in an approved

manner. For 16 Sq.mm. Allumium Cable

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

116A Providing & fixing double compressed heavy duty flange type 6.00 Each 43.00 Rupees Nine Hundred

brass cable gland with rubber ring for P V C insulated armoured Eighty Four And Paise

cable complete with outgoing tails, insulating tape etc. For Thirty Seven Only

following size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI,

Comet Make Only)

116B For 4 core*16 Sq. mm (Sigma, MCI, Comet Make Only) 8.00 Each 57.00 Rupees Nine Hundred

Eighty Four And Paise

Thirty Seven Only

117 Providing and Fixing Of Solderless crimping type Copper lugs 24.00 Each 8.00 Rupees Nine Hundred

conforming to IS suitable for cable of following size evenly Eighty Four And Paise

crimped with high pressure tool & connected to switchgear Thirty Seven Only

terminals with brass/cadmium plated nut bolts in an approved

manner. [a] 1.5/2.5 to 6 Sq.mm

118 Providing & Erecting Flexible PVC insulated multistrand multicore 190.00 Mtr. 46.00 Rupees Nine Hundred

1.1 kv grade ISI marked copper wires of following size to be Eighty Four And Paise

erected as directed. 3 core 1.5 sq.mm. PVC insulated round Thirty Seven Only

copper wire ISI mark.

……………………… I/C Exe. Engineer

Contractor Signature G. S. P. H. C. Ltd.