REPAIR AND MAINT WORKS FOR LEAKAGE SEEPAGE TO MP TILES, ROOFING SHEETS, EVES BOARDS, VALLEY GUTTER, WATER PROOFING TREATMENT OF ROOF AND SUNKEN SLABS, SANITARY FITTINGS AND OTHER MISC BR WORKS INMD AND OTM ACCN IN A B D E AND J AT NB(K)

Amount

Dismantling single layer mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and directed by Engr-in-charge and as directed.

Dismantling timber scantlings 40 Sq cm over in section for unframed work in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed.

Dismantling timber scantlings under 40 Sq cm in section for unframed work in fillets, rails, posts, rafters, purlins etc, in unframed works complete all as specified and as directed.

M&L for 2 nd class hard wood wrought in scantling timber fixed complete all as specified and as directed.

M&L for 2 nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails, sectional area exc 6 sqcm and n exc 13 sq cm complete all as specified and as directed.

All as per item No. 6 above but sectional area exc 13 sq cm and n exc 25 sq cm complete all as specified and as directed.

S&F for 2nd class hard wood clean sawn battern for tiles fixed at 30 cm centre to centre, sectional area exc 5 sqcm and n exc 15 sqcm complete all as specified and directed by Engr-in-charge and as directed.

M&L for roof tiles mangalore pattern interlocking at side joints laid dry complete all as specifiede and as directed. (Sample of MP tiles approved by GE).

M&L for ridge or hip tiles to suit mangalore pattern of roofing tiles bedded and jointed in cement mortar 1:6 complete all as specifiede and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed.

M&L.0.63 Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws all as specified.

S&F 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straightflashing(length and girth as fixed) complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50mm thick, on an colour, having tensil strength of 550 Mpa as in roof fixes with self tapping screws all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover filllets complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or MS work of any description not otherwise provided for

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.4923-1997 grade St.-240

S&F PVC insulation panels 10mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as in ceiling complete all as specified

S/F Aluminum snap grid false ceiling with grid 605x605mm size including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia 40 mm long complete all as specified.JINDAL/INDAL/HINDALCO)

M&L for 4 mm thick non asbestos fibre cement building boards (Pre painted) fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete all as specified and as directed by Engr-in-charge.

Dismantling of boarding of any description,fixed in any position with nails complete all as specified and as directed.

M&L for IInd class hard wood boarding clean sawn with butt joints, 20mm thick as in soffits of gutter, eves board fixed with nails, etc.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of new surface.

M&L for Preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

Repairs to expansion joint with following specifications : a) Demolition and removal of masonry (stone / brick) over the expansion joints and necessary chipping with machine, electrical chipper tools and removing debris from site, location as directed. b) Open the expansion joint by chipping the loose portions by the surface and straightening the edges of the expansion joint using FOSROC Renderoc-S2 or equivalent make of Pidilite, SIKA, STC, two part structural grade reinstatement mortar or equivalent including preparation of surface complete all as per manufacturer's instructions. c) After strengthening the edges of expansion joint, expansion joint filled with Hydrocel XL or equivalent make of Pidilite, SIKA, STC, @155 mm thick material, and then polythelene backer rod 30mm dia is to be fixed in expansion joint and the balance gap to be filled with concrete of size 40mm X 20mm with FOSROC Thioflex 600 two part polysulphide sealant or equivalent material. d) Providing and fixing a Expoband One a hypalon membrane system which is designed to be bonded over movement joints in structures to prevent the passage of water. The Hypalon membrane is bonded in position using Nitobond PC 40, two part epoxy adhesive or equivalent make of Pidilite, SIKA, STC, complete all as per manufacturer's instructions. e) Providing and applying bituminous water based primer on the prepared surface and when the surface is tacky self adhesive SBS membranes by using FOSROC Proofex GP or equivalent make of Pidilite, SIKA, STC are installed and firmly pasted it on the existing membrane joints laid in dry condition with approximate 80mm overlap of edges complete.

Taking down of existing roof treatment consisting of screed bed plaster tar felts etc including removal of PCC upto getting main roof slab and removal of dismantled materials complete all as specified and directed by Engr in Charge.

Supply only Liquid water proofing compound complete all as specified and as directed by Engr-in-charge.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick PCC (1:3:6) type C-1 (Using 20mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 40 mm type B-0, 1:2:4 (12.5 mm graded aggregate) as padding on roof slab complete all as specified and as directed by Engr-in-Charge

M&L for rendeing 10 mm thick on concrete/ brick surfaces in CM 1:3 including WPC as per manufacturer's instrs complete all as specified and as directed by Engr-in-charge.(WPC measured and paid seperately), Note :- Qouted rate to include for necessary scaffolding.

M&L preparing roof surface by removing oil, dirt, laitance and other contaminents manually and Injection of grout to construction joints and honey combs if any with cementitious pressure grouting with 40 Psi pump using Cobex 100 or equivalent @ 225gms mixed to 50Kg bag of cement including packing joints using polymer modified mortar, Providing and applying pitch free polyurethene water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours between application of each coat over the substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% (The rate includes the application of the chemical with specialized agency or the manufacturer) Note:- The contractor shall give a warrenty for the water proofing treatment for 10 years fron date of completion of work in stamp paper of value as given in CA.

M&L for providing pressure grouting on leaking points using 40 psi grout pump using Cobex 100 or equivalent @ 225gms mixed to 50Kg bag of cement including packing joints using polymer modified mortar , applying a coat of polyplus AC , two component acrylic based , water proof coat @ 500 gms/sqm , after 4 hrs applying second coat with polyplus AC @ 500 gms/sqm complete all as specified and directed.

M & L The water proofing treatment is Five course and shall be carried out as follows: - (i) Apply a coat of oil based bituminous primer @ 200 gram / square metre on the prepared surface. (ii) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (iii)Provide and lay 4mm thick APP modified torch applied water proofing membrane weighing not less than 4.00 Kg per square meter reinforced with non woven polyester matt, weighing not less than 160gm/sqm having softening point not less than 1400C, Longitudinal tensile strength not less than 650 N/5 CM, tear strength of 180N(Min), a static puncture resistance of 180, keeping a minimum of 10 cm over laps and 15cm end lap. (iv) Apply a coat of blown type bitumen grade 85/25 conforming to IS:702 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (v) Finishing surface with solar reflective bituminous aluminium paint, @ 100 gm/Sqm.

Taking down cement plastered on Brick/Concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with watercomplete all as specified and as directed by Engr-in-Charge.

M& L for rendering 8 mm thick CM 1:4 with approved water proofing compound over backing coat of 12 mm thick in CM 1:6 using liquid WPC, fair surfaces of brick work or concrete, finished even and fair all as specified and directed. (Note : water proofing compound paid separately)

M&L for preparation new plastered External surfaces for preparation of surface and applying two coats of weather proof paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer shall be as per manufacturer's instruction.

M&L for rendering 10mm thick on brick work or concrete wall surfaces in 1:6 cement mortar, finished even & smooth without using extra cement all as specified and directed

M&L for preparation of newly plastered wall surfaces and application of one coat of primer ,and two coats of oil bound distemper complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed .

S & F square UPVC rain water gutter (220 MM), with all necessary fittings like MS flat iron, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed. Make EURO GUARD PRO or equalent as approved by GE.

S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls(jointing shall be done with solvent cement) complete all as specified and as directed .

S & F PVC (SWR) bends, any radius, 110mm bore all as specified,complete all as specified and as directed .

Dismaintaing wall/floor tiling/ terrazo tile/ mosaic tiles/ pcc tiles/Granite slab incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises as in repair.

M&L for Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 Sqm, over and including 10mm thick screed bed in CM (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured joint free tiles 450x300X7mm/600x300x7mm in vertical surfaces over and including 10mm thick backing coat in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge

M & L for epoxy tile joint filling using Kerapoxy of MPAEI or equivalent on floor and walls. All complete as per the manufactures instructions

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level).

M & L for plain cement concrete Nominal mix (1:5:10) type E2(using 40 mm graded aggregate) as in sunken floor.

M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified

M & L 10mm thick rendering in CM ( 1 : 3 ) mixed with water proofing compound on fair faces of brick walls or conc surfaces and finished even & fair complete all as specified.(Note : water proofing compound paid separately)

Providing and applying pitch free polyethene water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours over a substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% (The rate includes the application of the chemical with specialized agency or the manufacturer)

S&F in repair 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC flushing cistern low level 8 to 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as specified and directed.

S&F in repair vitreous china WHB white with flat back of size 550x400mm with bracket including 32mm waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white including fixing with trap including PVC matching seat cover complete all as specified and directed.

S&F in repair brass CP towel Rail 600mm long "D" type complete all as specified and directed.

S&F in repair 15mm bore Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with PTMT Urinal spreader, grating and Union for discharge pipe, waste fitting 40mm. (including of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F waterproofing Samshiled XL as a SBS self adhesive water proofing membrane ofpolymer modified bitumen (Dr fixit or equivalent make) of length not less than 10 mtr neither width less than 1.00 mtr complete all as specified

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia including taking down old one complete all as specified and directed.

All as per item No 67 here-in-before but of size 25 mm dia complete all as specified and directed.

All as per item No 67 here-in-before but of size 20 mm dia complete all as specified and directed.

S& F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed.

All as per item No. 70 above but of size 25 mm dia complete all as specified and directed.

All as per item No. 70 above but of size 20 mm dia complete all as specified and directed.

Supply and fixing of bib tap CP, half turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15 mm and taking down old, complete all as specified and as directed by the Engineer-in-charge.(Make : Cera Cat. Part No. F1020151 or any other manufactures from the approved price list)

Supply and fixing of bib tap CP,half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/cpvc pipe of size 15mm and taking down old, complete all as specified and as directed by the Engineer-in-charge. (Make : CERA Cat. Part No. F2008152 or any other manufactures from the approved price list)

Supply and fixing of CP Bip cock short body with flange and nozzle for garden/wahing machine of size 15 mm including necessary fixing accessories with GI/CPVC pipes and taking down old unserviceble tape of any make , complete all as specified and as directed by the Engineer-in-charge.(Make : CERA Model No. F2002153 or any other manufactures from the approved price list)

Supply and fixing 15mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe and taking down old one, complete specified and as directed by the Engineer-in-charge.(Make : CERA Model No. F1018201 or any other manufactures from the approved price list)

Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one,complete and all as specified and as directed by the Engineer-in-charge.(Make : CERA Model No. F7020108AB or any other manufactures from the approved price list)

Supply and fixing PVC connection pipe 15mm dia (outer 450mm long cold water complete with PVC union on both sides to suit 15mm pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge. Make Cera Model F8070402 or any other manufactures from the approved price list

Supply and fixing health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe , including taking out old one all as per specified and directed (Make : CERA Model No. F8030108AB or any other manufactures from the approved price list)

S&F in repairs, Wall Mixer (3-in-1) with arrangement of both Telephonic Shower and Over Head Shower, with 210mm long bend pipe, complete all as specified and as directed by the Engineer in Charge. Make : CERA Model No. F1015403 or equivalent model of other approved manufacturers from the list.

Supply and fixing shower/ health faucet wall holder, brass chromium plated 20mm size, including taking out old one all as per specified and directed (Make : Cera Model No F8070102 or any other manufactures from the approved price list)

Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, commplete all as specified and directed by the Engineer-in-charge. (Make Cera Model No. F9020203 or any other manufactures from the approved price list)

Supply and fixed in repairs, Chromium Plated cast copper alloy Kitchen Sink Cock, quarter turn, wall mounted with swivel spout not less than 150 mm and wall flange complete all as specified and as directed. Make : Model No. F2002261 of CERA or equivalent model of other manufactureres from the list.

Supply and fixing of Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters incl taking out u/s old one. Make Astral Cat Part No. A832304WHSB or any other manufactures from the approved price list

All as per item 84 above but for 500 ltr capacity. Make Astral Cat Part No. A832302WHSB or any other manufactures from the approved price list

S/F float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed. Make Prayag Cat Part No. 155 or any other manufactures from the approved price list

S/F float valve synthetic(PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed. Make Prayag Cat Part No. 153 or any other manufactures from the approved price list

S/F float valve synthetic(PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.Make Prayag Cat Part No. 152 or any other manufactures from the approved price list

Supply and fixing of Loft water storage tanks (Rectangular with closed top) an elite plastic loft tank manufactured with “Bi-Axial Rotational Moulding" hoisted & fixed in position of capacity 200litre incl taking out unserviceable old one, complete all as specified and as directed by the Engineer-in-charge.

M&L for removal of water tank including necessary connecting accessories of any size and refixing the same in same place after completion of roof repair work complete all as specified and directed by Engineer-in-Charge.

Taking down Copper/ aluminium point wiring (light, fan, socket, bell, power point) complete fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting any type, building security light removing materials to store for keeping in safe custdoy for taking credit to match with existing suface all as specified and directed.

M&L Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade including PVC casing and caping and connected accessories ISI marked with concealed sunken boxes with modular cover plate, PVC boxes, hylem sheet, including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light point controlled by one switch complete all as specified and as directedby engr in charge.

All as per item No. 92 here-in-before but for one fan point controlled by one push button on independent board.

Material and labour for point wiring for one light with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC Conduit medium grade ISI marked Concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm Depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge.

All as per item No. 94 here-in-before but for exhaust fan point controlled by one push button on independent board.

All as per item No. 94 here-in-before but for 5 Amps socket point controlled by one push button on independent board.

S&F in repair switch piano flush type single pole one way 5 Amp one way complete all as specified and as directed. Make Anchor Model 38069 or any other make of the approved manufactures list.

S&F in repair fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed. Make : Anchor Model 38284 or any other make of the approved manufactures list.

S&F in repair ceiling rose surface Bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed.Make Anchor Model 39040 or any other make of the approved manufactures list.

M&L in replacement sub main wiring with 2 runs of 4 sq mm PVC insulated unsheathed multistranded single core copper conductor FRLSH, ISI marked cable drawn through ISI Marked, medium grade, non metallic, PVC Casing & Capping and all accessories, with 1 run of 4 sqmm PVC insulated unsheathed multistranded single core copper conductor FRLSH, and making good disturbed surfaces, applying distemper/ Emulsions matching to the existing colour/ quality of walls/ floors/ ceiling etc all as specified. Note- Three run of cable and one run of PVC casing and caping shall be measured as one unit.

All as per item No. 100 here-in-before but 2 runs of 6 sq mm single core FRLSH copper conductor and 1 run of 6 sqmm conductor for earthing. Note- Three run of cable and one run of PVC casing and caping shall be measured as one unit.

S&F in replacement, Sheet Metal Enclosure for MCB DB, SPN, 4 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make Legrand Cat Part No. 5076 10 or any other make of the approved manufactures list.

S&F in replacement, Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, with 200 Amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified. Make Legrand Cat Part No. 5076 11 or any other make of the approved manufactures list.

S&F in replacement, MCB SPN 6 to 32 Amps, 415 Volt, complete all as specified and directed. Make Legrand Cat Part No. 4086 17 or any other make of the approved manufactures list.

S&F in replacement, MCB SP 6 to 32 Amps, 415 Volt, complete all as specified and directed. Make Legrand Cat Part No. 4085 87 to 4085 95 or any other make of the approved manufactures list.

S&F in replacement LED light fitting 20 W, high performance batten, 220 volt,120 Lumen/watt, 50 Hz, 6000 k surface mounted high quality extruded polycarbonate, enviromental friendly, energy efficient, with all connecting accessories, with suitable connection complete all as specified. Make- Crompton, Cat Part No. CCS-100-20-65-HL2-DP-NWH or any other make of the approved manufactures list.

S&F in repair 10 W LED mirror light fitting, 110 Lum/Watt, with tube and provided with high output diffuser including all electrical connection all as specified and directed by Engineer in charge. Make : Luker Model LST510P or any other make from approved list of manufacturer.

S&F in replacement 15 Watt Square recessed mounted down lighter with high luminous LED for indoor application, 230 Volt, 50Hz, min 120 Lumen/watt with all accessories and connection to the electric circuit complete all as specified. Make- Crompton, Cat Part No. LSDEP-15-CDL or any other make of the approved manufactures list.

S&F in replacement 12 Watt Square recessed mounted down lighter with high luminous LED for indoor application, 230 Volt, 50Hz, 120 Lumen/watt with all accessories and connection to the electric circuit complete all as specified. Make- Crompton, Cat Part No. LSDEP-12-CDL or any other make of the approved manufactures list.

S&F in replacement 15 Watt recessed round down lighter with high luminous LED for indoor application, 230 Volt, 50Hz, min 120 Lumen/watt with all accessories and connection to the electric circuit complete all as specified. Make- Crompton, Cat Part No. LCDEP-15-CDL or any other make of the approved manufactures list.

S&F in replacement 12 Watt recessed round down lighter with high luminous LED for indoor application, 230 Volt, 50Hz, min 120 Lumen/watt with all accessories and connection to the electric circuit complete all as specified. Make- Crompton, Cat Part No. LCDEP-12-CDL or any other make of the approved manufactures list.

S&F in replacement Ceiling light in Dome series 18 watt, round, 50Hz, 230 Volt, 120 Lumen/watt with all accessories and connection to the electric circuit complete all as specified. Make- Luker, Cat Part No. LCL18R or any other make of the approved manufactures list.

S&F in replacement recess mounted/ surface mounted commercial luminaire 36 watt, 50 Hz, 220 volts,120 Lumen/watt, 5700 K LED down lighter 2'x2', all as specified and directed. Make- Havells, Cat Part No. VENUSNEOHE2X2R36WLED857PIRSENSOR or any other make of the approved manufactures list.

Taking down old ceiling fan of any sweep / make and painting by spraying in existing colour using synthetic enamel paint and re-fixing all as specified and as directed

Taking down old exhaust fan of any type & size and painting by spraying in existing colour using synthetic enamel paint including louvers and re-fixing all as specified and as directed. Note for all items in BOQ:- 1. Quoted rates shall include cost of necessary steel scaffolding (wherever required) as per standard engineering practice. In certain area height shall be upto 24m. The contractor shall not allowed to take any support from bldg for scaffolding i.e independent scaffolding made of steel tubular sections shall be used considering all safety norms. 2. All water proofing work to be carried out through the applicator of manufacturer. Approval of authorised applicator shall be obtained from GE before commencement of water proofing work.

Bell Builders

Yesgee Projects Private Limited

M.J.JOY AND COMPANY

Padmaja Specialities