Upgradation of Power infrastructure at KINFRA Integrated Industrial Textile Park (KIITP), Kanjikode, Palakkad Installation of dedicated feeder and laying of 22 KV cable from KSEBL 220kV Substation, Kanjikode to KINESCO 22KV Substation, KIITP, Kanji

Amount

ELECTRICAL WORKS

od117590/2021_2022 Horizontal Directional Drilling upto 160mm in all classes of soil for providing HDPE pipe of 160mm size through the hole for laying cable including all charges for the hire charges of machinery, restoring the damages occurred if any, laying HDPE pipes through hole and all sundry expenses etc. complete including supply of 8Kgf/cm2 160mm HDPE pipe complete.

od117595/2021_2022 Laying single run of 200 mm dia GI pipe -B class, with coupling, collars, clamps etc along the culvert / bridge/drain trench as per drawing and specifications etc. Complete, excluding the cost of GI pipe and specials such as coupling collars and sundries.

od124845/2021_2022 Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meter. 70% of soft soil

od124846/2021_2022 Excavation for cable trenches in hard soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 meter Hard Rock

od124873/2021_2022 Laying of one number XLPE power cable of 22 KV grade of following size direct in ground including excavation, sand cushioning, protective covering using country burned brick and refilling the trench etc as required. Above 120 sq. mm and up to 400 sq. mm.

od124848/2021_2022 Laying of one number XLPE power cable of 22 KV grade of following size in the existing RCC/HUME/METAL pipe as required. Above 120 sq. mm and up to 400 sq. mm. HDD

od124875/2021_2022 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 22 KV grade as required : sq. mm

od124922/2021_2022 Supplying and making outdoor cable end termination with heat shrinkable jointing kit completewith all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 22 KV grade as required :300 sq. mm

od117603/2021_2022 Mounting one 3x300 mm2 22kV XLPE out door / indoor cable termination of structures very carefully without causing any damage including drilling holes wherever necessary as directed by the departmental officers. (Cable Mounting at 4 Pole DP and RMU)

od124923/2021_2022 Supplying and making straight through cable jointing with heat shrinkable jointing kit completewith all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 22 KV grade as required :300 sq. mm

7.9 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

14.1 Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. (bridges/culverts)

od117657/2021_2022 Supply of 22kV 3*300mm2 XLPE UG Cable (From 4 pole structure to RMU inside KSEBL substation)

od117662/2021_2022 200mm dia GI pipeincluding specials such as coupling collars and sundries (at culvert and inside KSEBL Substation)

CIVIL WORKS

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared (In cable route)

2.16.1 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered). Depth not exceeding 1.5m (HDD locations and staright joint locations)

60.2.2 Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc complete (will be required in cable routes)

4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (For holding the cable inside HDD pits and straight joint pit)

4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns (Trench and Bridges/Culvert Crossing)

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (removing existing concretes in the cable route)

10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Bridge/culvert crossing)

4.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (Bridges/culvert Crossing)

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Bridges/culvert Crossing)

13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work (Bridges/Culverts) (On steel works)

ABM Electricals

VIJAYA ELE TECHS PRIVATE LTD.

Dinu Electricals

Bidder Name

ABM Electricals

Dinu Electricals

Imperial Engineering Company

VIJAYA ELE TECHS PRIVATE LTD.