Renovation of Anganwadi (Nandghar) building at Various villages in Ta. Limbdi, Dist. Surendranagar (2nd attempt)

Name of work : Repairing and Renovation of Anganwadi kendra at various villages in Ta. Limbdi, Dist.

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

1 Removing or scraping of old deteriorated plaster of any thickness 44.07 cum 18.93

fromm wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all

2 Providing & fixing 30 mm thick Flush Door of ISI mark Laminated all 5.00 Sqm 2152.31

round including SS fixtures and fastening etc. complete. (As per

market Rate and same as SOR IT 10048/P 89)

3 Provoding and fixing flush door shutters, solid core construction 9.30 Sqm 1797.76

with frame of first class hardwood with cross board and face veneer

or plywood face panels, including anodised alluminium butt hinges

with necessary screws. (B) Non-decorative type and block board

core anodised alluminium butt hinges in flush door shutters (2)

4 ` Providing and fixing Window having extruded Alluminium Colour 20.72 Sqm 1713.69

anodized Section frame main outer size 63.50 x 38.10 x 1.95mm (of

Jindal Section No. 4605, @ Wt. 1.094 Kg./Rmt.) horizontal Two

Track member size 61.85mm x 31.75mm x 1.20mm (of Jindal

Section No. 8687 @Wt. 0.695 Kg./mt.) vertical member of size

61.85mm x 31.75mm x 1.30mm (of Jindal Section No. 8758 @ Wt. of

0.659 Kg./mt.) with Sliding Shttuer of Horizontal member size 40mm

x 18mm x 1.29mm (of Jindal Section No. 8949 @Wt. of

5 Dismentaling tiled of stone floors laid in mortar including stacking 40.34 Sqm 46.77

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

6 Providing and laying 24" x 24" vitrified 8 mm thick tiles, flooring 59.70 Sqm 1204.20

over 20 mm (average) base of cement mortar 1.5 (1 cement coarse

sand) on new surface of fixng on existing flooring by adhesive

material including dismentalling of existing flooring and jointed with

colour cement slurry including finished with flush pointing &

cleaning the surface etc. complete for light shade (SOR I. NO

7 Providing and laying white glazed tiles 8 to 10mm thick, 24"*24" in 40.34 Sqm 1073.12

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

8 Providing 15mm thick cement plaster in single coat on Rough 122.15 Sqm 186.12

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand)

9 20 mm thick sand faces cement plaster on walls upto height 10 47.44 Sqm 326.10

meters above ground level consisting 12 mm thick backing coat of

CM 1:3 (1 cement 3 sand) and 8 mm thick finishing coat of Cm 1.1 (1

cement: 1 sand) etc. complete (SOR I. No. 17009 P. No. 130)

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

10 Distempering (two coats) with oil bound distemper of approved 576.48 Sqm 72.07

brand & manufacturer & of required shade on wall surfaces to give

an even shade, over & including a priming coat with a distemper

primer of approved brand & manufacture after thoroughly brushing

the surface free from mortar dropping & other foreign matter &

also including preparing the surface even & sand papered smooth

(SORI No. 18021 P. No. 132)

11 Finishing wall with Weather proof exterior emulsion paint on wall 532.54 Sqm 114.53

surface (two coats) to give an approved brand and manufacture and

of required shape even shade after thoroughly brushing the surface

to remove all dirt and remain of loose powered materials (SORI No

Providing and136)

fixng Water Closet squatting pan (Indian Type W.C. 2.00 No 1368.16

Pan) size 580 mm including 100 mm size P Trap & Foot rest (Earth

work, Bed concrete, foot rest and traps to be measured and paid for

separatly) (A) Vitreous China (i) Long Pattern white colour (SOR

13 Providing and fixing wash basin with single hole for pillar tap with 2.00 No 2092.54

C.I. or M.S. brackets painted with including cutting holes and

making good the same including fittings. (A) Vitreous Chona (ii) Flat

back wash Basin 550mm x 400mm size (i) in white colour including

pillarcock & Stop cock.

14 Providing laying and jointing in true line and level 32mm dia. 54.00 Rmt 119.14

U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE

/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. (SOR

15 Providing laying and jointing in true line and 54.00 Rmt 91.83

level 25 mm dia. U.P.V.C. Pipe (SCH-40) line including fittings make

or equivalent as apprroved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials ( SOR I. No 23062 P.

16 Providing and fixing to wall ceiling and floor 10.0 Kg Mom2 working 80.00 Rmt 336.23

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clips

etc. including making good the wall ceiling and floor, (c) 100mm dia

17 Providing and fixing S W. gully trap with C grating brick maronary 4.00 No 1292.19

chamber and watering tight C.1. cover with frame of 300 mm x

300mm size (inside) with standard weight (1) squre month traps (A)

100 mm x 100mm size P type SOR INo 24006A P. No. 163)

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

18 Providing & foong PVC SWR Nanhi trap IS 14735 for drain 100 mm 10.00 No 558.35

diameter with jall of following nominal diamete self cleaning design

with Ci soread down or hinged gratting including cost of cutting &

making good the walls (SOR New 1. No 23068 P. No. 160)

19 Providing and fixing gun metal check or non return full way whesi 4.00 No 360.34

valve(C) 25mm da(SOR 2021-22 M265)

20 Providing and foxing Screw Down Bib Tabs of following size (A) 11.00 No 186.82

Brass screw downtiti tab poluhed bright (0) 15 mm dia (SOR IN

21 Providing and fung double coated Sintex of Equivalent PVC (SI) mark 2500.00 Litre 3.94

water tank of required capacity each with all necessary ing ant

connection els complete overace or as directed by Engineer in

Charge (SOR Pg No 1428 No 22014)

22 Providing Bela masonary septic tank inside 3.0 M x 1.0 x 1.20 M 2.00 No 25272.97

including excavation, B.B.C.C. 1:5:10 concrete at bed, 0.23 mm thick

Bela masonary wall in CM 1.6 alround, 0.115 mt thick two partition

wall set equal distance in CM cement plaster in CM 1:3 R.C.C. top

slab of C.C. 1:2:4 (0.10 mm thick) two Nos. of C.I. cover of 0.60 x

0.45 mt size having weight not less than 35 kg curing finishing etc

23 Providing sock pit of 5.00 Cu.M. Volume including excavating and 2.00 No 3372.18

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in

C.M. 1:3 with finishing curing etc. complete as directed. (SOR Pg No

24 Constructing brick masonry chamber for underground C.I. 2.00 No 2932.92

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation

25 Constructing a cooking platform 60 cm. width and 70 cm high 4.20 Rmt 2565.88

resting on B.B.Masonry walls 23 cm thick in C.M.(1:6) with (1) Fixing

or precast R.C.C. 1.2.4) 8 cm thick slab with marble chips set in C.M.

(1:6) (6mm thick terrazo) with plastering on exposed faces walls in

CM. (1:4) etc complete (P. по -148 1 No.-22004A)

26 Providing & laying broken China mosaic flooring for terrace using 185.64 Sqm 747.28

12mm to 20 mm broken piece of glazed tiles to be lald over cement

mortar 1:3 (1 cement: 3 sand) to plain or slope and to be tempered

to bring mortar creme out upto surface using white cement

including rounding of junctions and extending them upto 15 cm

along the wall, clearing with water and oxalic acid etc. as directed.

27 Repairs to Electrication incl. Replaciny Damaged Switch, Switch 2.00 Job 5050.00

Board, Fan Regulator, Casing Pipe, Wire and Finishing Complete

Item Description of Item (With brief specification and Quantity Unit Rate Amount

No. reference to book of Specification)

28 Supplying & fitting Electrification including standard ISI mark copper 1.00 No 15554.00

wire gauge minimum 3/20 & above, 20 Nos of lighing point, 2 Nos

Fans, 6 Nos Tube light, including electric accesseries like Tube light

T-5, CRL, Fans, uality as required under the supervision & as

directed by Engineer-in-charge

29 Electric Motor 3 phase, 415v +/-10 % A.C. squirrel Cage induction 2.00 No 9592.00

motor with Both side extended shaft, Insulation class-F,Encloser IP

55 as per IS-325 or Latest IS. (Crompton Greaves, Bharat Bijli,

Kirloskae, GEC, Jyoti,L & T, Havells)

2 H.P., 1550 RMP

30 Providing and fixing Nand Ghar Logo and bala paint ( As per M.R.) 2.00 No 2020.00

Rs. Six lakh fifty two thousand four hundred seventy nine rupees and nighty Paisa Only

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should

be written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat (R&B) Division

Limbdi Surendranagar