Furnishing of Auditorium at College of Dairy Science and Technology Building, GADVASU,Ludhiana.

Amount

Supply, installation, testing & Commissioning of stage FOH clusters having 14" or dual 10" or better LF driver and multiple MF/HF drivers (More than 4), Bi-amplified 2 or 3 Way array loudspeaker system, with Individual Module free field Frequency Range (-10dB) of 60Hz - 18kHz or better & Continuous Power Handling of >= 600W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have a Horizontal near dispersion pattern of 100º or better, vertical dispersion of the array shall be 70 degrees or better. The Modules shall be of Baltic birch plywood construction with internal metal bracing. All OEMs shall offer a suitable number of modules to achieve the required vertical angle (Minimum of 2 array modules) complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL /Renkus-Heinz

Supply, installation, testing & Commissioning of OEM flying array frame and other necessary hardware for suspending main speaker arrays. All necessary hardware to be included to achieve a safety factor of 8:1 or better complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL/ Renkus-Heinz

Supply, installation, testing & Commissioning of a single 18" subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 28 Hz - 200Hz or better. It should have an axial Sensitivity of > = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of >=127 db or better. The loudspeaker should have a nominal impedance: 4/8 ohm and continuous Power Handling of 750W or more; Complete with installation accessories as per the site requirement. Make :- Bose/QSC/JBL/ Renkus-Heinz

Supply, installation, testing & Commissioning of OEM flying array frame and other necessary hardware for suspending subwoofer complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL/ Renkus-Heinz

Supply, installation, testing & Comissioning of Passive two-way point source loudspeaker with a single 8-10" LF driver and compression driver with 1.7" or better Voice coil. Frequency Range (-10dB) of 80Hz - 18kHz or better & long term Continuous Power Handling of 250W or better. The Loudspeaker module shall have a Max. SPL (Peak) of 122 or better. It should have Horizontal dispersion pattern of 90º or better, vertical dispersion of the loudspeaker shall be 60 degrees or better. The loudspeaker shall be enclosed in a Multi angle baltic birch plywood enclosure with perforated steel grille. complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL/ Renkus-Heinz

Supply, installation, testing & Commissioning of wireless Lapel microphone, with (UHF) Diversity receiver, 12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted) switching bandwidth Minimum 40Mhz Or better complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of wireless Handheld microphone, with (UHF) Diversity receiver, 12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output typ.50mW or Better , THD, total harmonic distortion < 1 % , Signal-to-noise ratio > 103 dB(A)Polar Pattern :- Omnidirectional, Carrier frequency range 548Mhz to 865Mhz, Frequency response (Microphone) 80...16000 Hz , Switching bandwidth 24 MHz (13 MHz in range E), Mute Button on Transmitter, Battery Operation time Minimum 8hr , Sound pressure level (SPL) 149 dB complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of 4 way Antenna Distribution System.The Antenna Splitter shouldsupport upto 4 Receivers,it shouls split signal from 2 Antennas to 4 wireless microphones receiversor more ,it shouls be able to power ipto 4 connected receivers ,full true diversity support,should support UHF range from 470 MHZ to 870 MHZ or more,Should come with power supply as required,should be from the same OEM as wireless microphones for 100 % compatibility etc complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of Passive Directional Antenna ,the antenna should come built-in 3 dB of more gain,should be from the same OEM as wireless microphones for 100% compatibiliity etc complete in all respect with required accesories as desired by Engineer- In- Charge. Makes:- Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of Instrument Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 33-19,000 Hz, Open circuit voltage : 2.7 mV/Pa (-51.4 dBV), Nominal impedance : 600 Ω, Load impedance : ≥ 2 kΩ, Connection : XLR, 3-pin, male, etc complete in all respect with required accesories as desired by Engineer- In- Charge. Makes:- Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Super cardioid, Frequency response: 30 - 18,000 Hz, Open circuit voltage : 2.5 mV/Pa (-52 dBV), Nominal impedance 600 Ω, Connection: XLR, 3-pin, male, etc. complete in all respect with required accesories as desired by Engineer- In- Charge. Makes:- Beyerdynamic/Shure/Sennheiser

Supply, installation, testing & Commissioning of black anodized, table mic stands complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of black anodized, floor mic stands complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 16 in 8 out Analog I/O Digital stagebox as the same OEM and compatible with offered Digital Mixer. Shall offer pre-amp control and a redundant mode connection complete in all respect with required accesories as desired by Engineer- In- Charge. Make: Yamaha/Allen & Health/Digico.

Supply, installation, testing & Commissioning of Digital Audio Mixer with 32-40 input Digital Mixing Console and USB Interface and 32 programmable Preamps, 24 or better Motorized Faders, 40 DSP input channels (32 mono inputs and 4 stereo channels/returns), Channel LCD's, FireWire/USB Audio Interface and iPad/iPhone* Remote Control include I/O Box with 16 Remote-Controllable Preamps, Including Mini Stagebox 16 or 32 Channel combine high-quality components with a streamlined design, making it easy to add multiple channels of remote- controlled I/O toDigital mixing console complete in all respect with required accesories as desired by Engineer- In- Charge. Make: Yamaha/Allen & Health/Digico.

Supply, installation, testing & Commissioning of Dante Digital Audio I/O card for offered digital mixer. Shall offer gigabit redundant Ethernet connection ports for bidirectional audio upto 64x64 channels. Make: Yamaha/Allen & Health/Digico.

Supply, installation, testing & Commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Bose/QSC/Crowm/Renkus-Hienz

Supply, Installation, testing and commissioning of intregrated high impedence Class D Dual Zone Amplifier with output power of 2 x 120 W @ 70/100 V ; Frequency Response - 55 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤1 % (at full rated power); Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (any input to speaker output or aux output); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Maximum Input Level : +10 dBV or better. 1 balanced page/priority input, 3 unbalanced line inputs; built in loudspaker EQs. Shall include output for expansion amplifier and remote controller (Wired) for source as well as volume control complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Bose/QSC/JBL/Renkus-Hienz

Supply, installation, testing & Commissioning of custom Floor Box for stage with 4 power, 1 HDMI, 2 XLR input, 1 HDMI out, 2 LAN port complete in all respect with required accesories as desired by Engineer- In- Charge. make;- Custom/EIC aprroved

Supply, installation, testing & Commissioning of 3' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning of 6' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning of 9' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning of 15' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning of minimum 14 AWG or thicker Speaker Cable with copper conductors and PVC Jacket complete in all respect with required accesories as desired by Engineer- In- Charge. Make ;- Liberty AV/Belden/Extron

Supply, installation, testing & Commissioning of 24 AWG or better CAT6A LSZH cable complete in all respect with required accesories as desired by Engineer- In- Charge. Make- Liberty AV/Belden/Extron

Supply, installation, testing & Commissioning of Shielded microphone cable. 2 core + Shield, 23 AWG or better complete in all respect with required accesories as desired by Engineer- In- Charge. Make ;- Liberty AV/Belden/Extron

Supply, installation, testing & Commissioning of USB Active cable of 10 mtr or more length complete in all respect with required accesories as desired by Engineer- In- Charge. Make ;- Liberty AV/Belden/Extron

Supply, installation, testing & Commissioning of LMR Cable with required connectors for Antennas complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 42 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Netrack/APW President/Rittal/valrack

Supply, installation, testing & Commissioning of Projector Laser phosphor, 1920X1200 native resolution, 13,000 lm to 17000 lumens (13,600 lm center minimum) laser light source projector, Contrast Ratio- Infinite:1, Illumination life 20000 hours min , Colour Space sRGB 100% (Picture mode: sRGB), with HDMIx2 , HDBT, Optional adaptor slot for 3GSDI Input Adaptor (BKM-PJ20), Monitor output for Input A/Input B Connector: Mini Dsub 15-pin (female), LAN, USB Type- A x1 , Type-B x1 , Lens throw ration 1.85 : 1 to 2.44 : 1 or better, Aperture f/2.20 to 2.60 or better including Compatiable Projector Mount as per site/ design complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Sony/Barco/Christie/Digital projection

Supply, installation, testing & Commissioning Cyclorama:MS. Frame structure: 35mm dia MS. Pipe Frame structure with 25 mm MS pipe Ribs between the frame pipes. Structure to be raised from stage floor - 150 to 200 mm; back wall clearance as per drawings.MS Frame structure to be well supported from back wall and /or ceiling.Screen Fabric : White Matt Fabric. Screen to be made as per the maximum screen size possible on the stage with minimum 200mm black border on all sides for fixing of Eyelets on all sides. Cyclorama to be stretched and tightened from all sides securely using cotton ropes. Appx. Size:- 8 mtrx 5 mtr complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: GTC, Harkness, Effectron)

Supply, installation, testing & Commissioning of Smart metallic podium with space for optional gooseneck mic , separate drawer for documents, fitted with i5 PC (8GB RAM, 1TB HDD, Wi-Fi enabled, and licensed Window 10 Professional pre loaded with 4 USB port, Licenced microsoft word, antivirus and other required softwares for functioning of auditorium softwares, HDMI port and audio port, fitted with 23” Interactive Touch Monitor for Live annotation. FHD / UHD Resolution. Brightness: 250 cd/m2, contrast ratio: 1000:1 or better. Viewing angle : 178°(v) 178°(h) or better. Input: 1x HDMI. USB Interface. To be supplied with complete accessories wireless keyboard and wireless mouse with required capacity UPS complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- HP/DELL/IBM

Supply, installation, testing & Commissioning of 55"4K (3,840 x 2,160), Direct (Full Array LED), Professional Slim Blade Stand Display with 4K HDR Processor X1,HDR (HDR10, HLG, Dolby Vision), Native Contrast ratio upto 6,000:1, Response time 6ms, Peak Brightness 850 cd/m², 4K XReality PRO,TRILUMINOS DISPLAY technology, 24/7 Portrait ,Tilt functionality, Flexible Content Layout with HTML5, 16GB On Board Storage, Motionflow XR,HDCP 2.3 (HDMI) / RS232 / USB / RJ45 / Wi-Fi with In-Built Bluetooth / 20W Speakers / Android™ OS system, Viewing angle 178 degree, Pro Mode, Pro Display using Apple AirPlay & Chromecast complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Christie/Sony/NEC

Supply, installation, testing & Commissioning of tilt capable, height adjustable floor cart for confidence monitor display of reputed make and Shall have integrated VESA mounts for display complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 43 inch 4K (3,840 x 2,160), Professional Slim Blade Stand Display with 4K HDR Processor X1,HDR (HDR10, HLG, Dolby Vision), Direct LED, Dynamic ,Birghtness 440nits , contrast ratio upto 400,000:1,4K X-Reality PRO,TRILUMINOS PRO technology, 24/7 Portrait ,Tilt functionality, Flexible Content Layout with HTML5, 16GB On Board Storage, Motionflow XR,HDCP 2.3 (HDMI) / RS232 / USB / RJ45 / Wi-Fi with In-Built Bluetooth / 20W Speakers / Android™ OS system, Viewing angle 178 degree, Pro Mode, Pro Display using Apple AirPlay & Chromecast, Good quality/ OEM frame /bracket for 43" display solid panel complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Christie/Sony/NEC/Samsung

Supply, installation, testing & Commissioning Of Monitor 70" LCD Panel Resolution: 1920 x 1080 pixels, Max Display colours: 1.07 Bn Colours, Backlight: LED-Edge Lit, Brightness: 350 cd/m2 16x7 type operation professional grades. Built-in speakers, Input terminals-HDMI x 3, Mini D-Sub 15 pin x 1, Component Video RCA ( Y, Cb/Pb, Cr/Pr,) x 1, Composite Video RCA Pin x 2, RS-232 x 1, USB x 1. Output terminals- RCA Pin L/R x 1, Digital Audio Output (Optical) x 1.Approved, Good quality/ OEM frame /bracket for 70" display solid panel complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Christie/Sony/NEC/Samsung

Supply, installation, testing & Commissioning of of 4K/UHD 60 fps PTZ Camera speciualised for video conferencing having minimum 20x optical zoom, 12x Digital Zoom, 1/2.5" 8.5 MP CMOS Sensor. featuring HDMI/ SDI/Ethernet output, Control: RS232/Ethernet. Including wall/ceiling mounting accessories complete in all respect with required accesories as desired by Engineer- In- Charge. Make;- Lumens/Vaddio/Sony

Supply, installation, testing & Commissioning of hardware based Video Recording and streaming device for recording all kind of meetings including video conference. 02 or more HDMI Input, 01 or more HDMI/DVI input. one or more analog video input. one or more balanced/unbalanced analog audio Input, Minimum two window Picture-in-Picture (PIP), Picture by Picture. Resolution minimum 1080P@30fps or better. Built in stroage of minimum 30GB and option for external and network storage. Should also support built instreaming. PUSH/PULL, RTSP/RTMP, Unicast/Multicast. RS232/LAN control complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Extron/Lumens/Mediasite

Supply, installation, testing & Commissioning of 2 gang Wallplate type AVOIP transmitter, 4K @60 Hz, HDMI/VGA Auto switching, Encode audio / video, USB, IR, RS232, and power over IP network up to 100m, resolutions up to 4K, HDR10, and multi-channel Audio, HDCP 2.2 compliant, Extend USB2.0 full speed up to 12Mbps, PoE or DC power input, 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps up to 850Mbps , analog audio input port for audio embedding, RS232 port as pass through to control a third party device, USB KVM inbuilt complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning Box type HDMI AVOIP Transmitter, 4K @60 Hz, Encode audio / video, USB, IR, RS232, and power over IP network up to 100m, resolutions up to 4K, HDR10, and multi-channel Audio, HDCP 2.2 compliant, Extend USB2.0 full speed up to 12Mbps, PoE or DC power input, 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps up to 850Mbps , analog audio input port for audio embedding, RS232 port as pass through to control a third party device, USB KVM inbuilt.7.1 multichannel audio, Up & Down scaling capability, Supports video walls with bezel compensation,IR in and out for 2 way IR control complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Liberty AV/Crestron/Extron

Supply, installation, testing & Commissioning of AVoIP Receiver (Decoder) with industry standard codec. Shall support HDMI signals up to 4K HDR, HDCP 2.2 compliant, and 7.1 multichannel audio, Upscaling upto 4K resolutions. RS232 port, bidirectional IR support. Video wall mode with Bezel compensation, USB connection passthru. Integrated scaler with up & down scaling capability up to 4K30 4:4:4 POE powered, variable or fixed data rate complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of Controller for AVOIP devices having Supports resolutions up to 4K@60 with HDR,Integrated up or down scaling for maximum display compatibility, HDMI connectivity for source/sink I/O & CEC ,HDMI Loop output on encoder, Video wall up to 16X16 configurations are supported with bezel compensation, Low latency & fast switching time, RS-232 pass-through ports, Fully compatible with 3rd party control systems, Audio embed/de-embedding ports, Supports most multi-channel audio formats, USB, RS-232 & Audio may be routed independent of the video, Decoder equipped with an 4K auto-scaler,Uses JPEG2000 video codec,Dante Audio Support, Configuration license upto 50 IP equipment complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Liberty AV/Crestron/Extron.

Apple lightning to HDMI female, Apple USB-C to HDMI female, genric USB-C to HDMI complete in all respect with required accesories as desired by Engineer- In- Charge. make:- Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of 10-11 inch Multi‑Touch display(iPad) with IPS technology with Liquid Retina display, Resolution:2388x1668-pixel resolution at 264 pixels per inch (ppi), 600 nits brightness. Should be provided with docking station complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Apple/Samsung/ HP or equivalent make approved by EIC

Supply, installation, testing & Commissioning of Fully Programmable 10" wall mount capacitive touchscreen interface for switching and control of AV equipment. TFT Active matrix Color LCD display, Resolution 1280x800 or higher, Color depth : 24 bit, 16.7 million colors or higher, Brightness: 400 nits (cd/m2) or higher, Viewing angle: ±80° horizontal, ±80° vertical or more, Capacitive Touch screen. Memory: 4GB Flash, SD RAM: 2 GB. 10/100/1000Base-T female RJ-45 connector. Shall be supplied with Power supply or POE Inejctor along with wall mounting accessories. Shall meet regulatory compliances: CE, c-UL, UL complete in all respect with required accesories as desired by Engineer- In- Charge. Make;-Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of fully programmable 6-8 button wall mount automation system controller,shall work over standard RJ-45 point to point cabling complete in all respect with required accesories as desired by Engineer- In- Charge. Make: Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of IR receivers compatible with offered automation system. Complete with necessary cable complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of AVoIP system controller with RS-232 & Network interfaces. Complete with subscription licenses for all end-points for a period of at least 10 years. Should be Software manageable, expandable complete in all respect with required accesories as desired by Engineer- In- Charge. Make:-Liberty AV/Crestron/Extron.

Supply, installation, testing & Commissioning of gigabit L II with minimum 48 ports or better or as required for auditorium design managed switch with combo SFP ports. Should be Software manageable, expandable complete in all respect with required accesories as desired by Engineer- In- Charge. MAKE :-Netgear/Cisco/Allied Telesis

Supply, installation, testing & Commissioning of of HDMI to USB-C converter. Shall support 4K resolutions complete in all respect with required accesories as desired by Engineer- In- Charge. Make;- Extron/Liberty AV/Crestron

Supply, installation, testing & Commissioning of USB extender set that extends computer USB 1.1 and USB 2.0 signals up to 100m (330 ft) over twisted pair cabling to four remote devices. The extender set utilizes inexpensive twisted pair cabling and has a throughput of up to 480Mbps. The extender set is perfect for keyboard and mouse extension, remote data ports, minimum 4 USB A on transmitter and 1 USB-Bon receiver, security applications and interactive white board applications complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- ScreenBeam/Crestron/Extro

Supply, installation, testing & Commissioning of Motorised winch to use as Lighting bar of 7.5 mtr., made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided with Necessary pulley, guide pulleys, GI wire rope with winding drum,Specially designed compact gear box,0.5/1.0HP AC motor, Upper and lower limit controller, Average Length of Bar 10 mtr, With cable retractor & cable trays complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Fixed Light bar of 10 mtr. length, made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided With cable trays complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Motorised winch to use as Utility bar of 8 mtr. length, made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided with Necessary pulley, guide pulleys, GI wire rope with winding drum, Specially designed compact gear box, 0.5/1.0HP AC motor,Upper and lower limit controller, Average Length of Bar 10 mtr complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Direct lighting distribution board panel having incomer 100 A 4 pole MCCB or 63 A 4pole/TPN , outgoing 1 no. 32 A TP MCB & 72 nos 10-16 Amp SP MCBs. Necessary phase indicator lamp, meter , and Busbar to be provided. The panel must have undergone through various chemical treatment to keep them rust free and dulypowder coated in Siemens Grey finish. MCB's to be used Siemens, schnieder, ABB, Legrand complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of MS lighting junction box made up of 16SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand5/15A Anchor Socket with suitable glands complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 16 SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand fitted with 3/5 pin XLR DMX connector complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

MS Fabricated power junction box (PJB) for terminating the motor wires undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finish complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Well designed and engineered Wall mount 10 feeder Motor Control Centre Panel with 125A McCabe as incomer and 32A TP MCB as outgoing necessary meterings, contactors etc. to control the Light Bars, Frill Bars etc. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Well designed and engineered Wall mount 2 feeder Remote Control Panel with necessary indicators and terminal block for remote operations of curtains complete in all respect with required accesories as desired by Engineer- In- Charge.(Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 3/5 pin XLR DMX IN connector for console complete in all respect with required accesories as desired by Engineer- In- Charge.(Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of MS sheet metal fabricated power junction box undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 2 10amps 3 pin IEC socket, ON/OFF switch and necessary glands to power splitters and console complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatement to keep them rust free and duly powder coated and fitted fitted with 3/5 pin XLR DMX IN connector for console complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 200W LED Fresnel spot Light with 200mm dia Germen Lens with Lamp power - 200W , LED Type : COB LED, Color Temperature 3200K ,CRI > 95, spot - Flood Focus adjustment : Mototrised, Beam angel - 10° - 50°Power Rating - IP 20 , Control Manual , DMX0-100% through manual and DMX , Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz CE Certifiedcomplete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 200W LED PARCAN with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature CW/WW , Power Rating - IP 20 , Control Manual , DMX, Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz , CE Certified complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 54x3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W RGBW LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional) Function - Manual dimming, DmX modes of operation. The work shall be completed in all respect as per sound engineering practice & Direction of EIC. (Make: Jhajra, Effectron, Canara)

Supplying Installation testing & Commissioning of LED Bar Light having RGBWA output, 72 LED's 16R+ 16G+16B+ 8W+16A RGBWA LEDs, Angle : 30°x60°, Strobe + Duration Effect Engine, DMX- 512, Color LCD intuitive menu system, 90 - 240VAC, 240W - Power Consumption, complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 2x2 blinder matrix fixture with advanced COB LED technology light with Frequency : 50-60Hz, Power Consumption: 240W LEDs Qty : 4 pieces Light Color: Single color warm white (3200K)• Lifetime: Over 50,000 hours• Dimmer: 0~100% linearly adjustable Beam Angle: 30 degree Control mode: DMX512,Master/Slave, Auto Run, Sound active. IP Grade: IP20 Net Weight: 5kgs The work shall be completed in all respect as per sound engineering practice complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 200W LED Profile light 19 degree with below specifications :- Lamp Power : LED, 200W Power Supply : AC 110-230V, 50Hz Focus : Manual Focus , Beam Angle : 19° , Dimmer : 0-100% linearly adjustable manualy focusable, high quality optical system,glass reflector. DMX Control protocol: DMX 512. , CRI : >90 , Dimming : 100 - 0% dimming • Control system : DMX,Auto run and master/slave, Working temp : 30-40 degree celcius,No noise fan of pccooler, Protection Rating : IP20 , CE Certified complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 310W 7R Beam moving head complete with MSR 7R Lamp, Prism, Gobos, Colour effect functions Pan : 540° (16 bit ) Tilt : 270°(16 bit ) Advanced moving system: fast, stable and quiet, auto X-Y repositioning, Shutter: 0 – 100% Dimming and variable strobe, Option of Male female DmX in/out through 3 & 5 Pins, 14 di chroic filters +open, Duo rainbow effect, 18 rotating, indexable, gobos+open, Rotating prism: Dual 8 Facet, DmX 5pin Connectors, Power Loop-in Loop-out Optional, Focus: motorized focus, 7 Pre built programming, Electronic Flicker free operation, Dimension 415 x 343 x 495mm, LED Display Indication complete in all respect with required accesories as desired by Engineer- In- Charge (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of 2000W Fog machine wire / remote / DMX 512, electronic control temperature. Smoke output 20000cuft/min @ 12Mtrs complete in all respect with required accesories complete in all respect with required accesories as desired by Engineer- In- Charge.(Make: Antari, Smoke Factory, Effectron, Satan)

Supply, installation, testing & Commissioning of Diecast aluminium "C" clamp with safety pin. SWL 100 Kgs complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of Rack mount photo isolator DMX splitter unit 1 DMX input and 6 isolated output with following specifications:complete in all respect with required accesories as desired by Engineer- In- Charge. Power Supply: 90-240V AC, 45-63Hz. Control: DMX 512 protocol. Control Signal input: 5 pin XLR female. Size: 482 x 44 x 128mm. Weight: 2Kg (Make: Jhajra, Effectron, Canara)

Supply, installation, testing & Commissioning of Lighting console shall support the processing of up to 1024 total DMX512 outputs by use of potentiometers for submasters, playbacks and effects as well as buttons to activate cues. The console shall support up to 250 control channels for the purpose of controlling dimmers for incandescent loads. The console shall support up to 30 automated luminaires with a maximum of 40 attributes each. Each intensity channel shall be controlled on a Highest Takes Precedence complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: Effectron, Canara, Philips, Avolite)

Supply, installation, testing & Commissioning of hot dipped GI perforated cable trays of size 40x75x40 x2 mm complete in all respect with required accesories as desired by Engineer- In- Charge.

OUTDOOR UNITS: Supply, Installation, Testing and Commissioning of Variable refrigerant volume/ Variable refrigerant flow modular type air-conditioning system suitable for cooling and heating by using variable capacity Inverter based compressors in each Module complete with outdoor units with controller and with accessories & sub assemblies fittings etc. full charging of R-410A refrigerant gas complete, powder coating complete as per specifications,with compatibility to BMS for A/M status, RUN status & Remote start/stop command.(Bacnet/IP) complete in all respect with required accesories as desired by Engineer- In- Charge. Make: Mistubishi,o'general,Daikin,Hitachi Outdoor units of nominal capacity as per manufacturer's standard suitable for operating with R-410A refrigerant. Minimum 16 HP complete in all respect with required accesories as desired by Engineer- In- Charge.

INDOOR UNITS (NOMINAL CAPACITY) Supply, Installation, Testing and Commissioning of Ceiling Suspended with high static type Ductable units of following Nominal capacities with fittings, flexible canvas connection etc. complete with Corded remote controls with (Bacnet/IP) ,as required. 16HP / Convertible IDU complete in all respect with required accessories and remote controllers for indoor units as desired by Engineer- In- Charge.

Supply, Installation, Testing and Commissioning of Y - Joints and connecting Kits with necessary fittings as per specification complete in all respect with required accesories as desired by Engineer- In- Charge.

Installation of Variable Refrigerant Flow SystemInstallation Modular type outdoor units equipped with highly efficient scroll compressors. Each outdoor unit should have minimum 1 no. variable compressor up to 18 HP, 2 nos. variable compressors upto 32 HP capacity, 3nos. variable compressors up to 54 HP capacity with special heat exchanger, 27 Steps speed control DC motor condenser fan , auto check function for connection error, auto address setting and in built Double Stage Oil Seperation to ensure minimum oil entrachment and proper lubrication.The condensing units should be capable for outside ambient 48 Deg. C.Installation, testing and commissioning Outdoor Unit 16 HP Heat Pump Type as per IS standards complete in all respect with required accesories as desired by Engineer- In- Charge. Make: Mistubishi,o'general,Daikin,Hitachi

Indoor Units Supply, installation, testing & Commissioning of Indoor units address setting and capacity as mentioned below. multispeed motor, coil section with DX coil, outer cabinet, drain pan mechanism insulation, pipe connections, fresh air intake connector and individually controlled louver setting for cassettes and concelled unit above 3 hp have higher air quantity of 400 cfm/tr etc. of various capacities as per IS standards and specifications. with required topping of R410 Gas, Convertible 16HP Ductable,Corded /Cordless Remote, M S Stand for Outdoor Unit mounting,Multy Kits complete in all respect with required accesories as desired by Engineer- In- Charge.

Refrigerant Piping, Drain Piping & Cabling Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per IS standards & specifications, all piping inside the room shall be properly supported with MS hanger complete in all respect with required accesories as desired by Engineer- In- Charge. 28.6 mm O.D.(with 19 mm insulation )

Refrigerant Piping, Drain Piping & Cabling Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per IS standards & specifications, all piping inside the room shall be properly supported with MS hanger complete in all respect with required accesories as desired by Engineer- In- Charge. 22.2 mm O.D..(with 19 mm insulation )

Refrigerant Piping, Drain Piping & Cabling Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per IS standards & specifications, all piping inside the room shall be properly supported with MS hanger complete in all respect with required accesories as desired by Engineer- In- Charge. 15.9 mm O.D.(with 13mm insulation )

Refrigerant Piping, Drain Piping & Cabling Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per IS standards & specifications, all piping inside the room shall be properly supported with MS hanger complete in all respect with required accesories as desired by Engineer- In- Charge. 12.7 mm O.D.(with 13mm insulation )

Supply, Installation, testing & commissioning of Refnet Joints complete in all respect with required accesories as desired by Engineer- In- Charge.

Providing and fixing rigid PVC piping complete with fittings, supports as per IS standard & specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation complete in all respect with required accesories as desired by Engineer- In- Charge. 25 mm dia

Providing,fixing, balancing, commissioning and testing of Site fabricated sheet metal ducting complete with supports, dampers, vanes etc. as per specifications and drawings including cutting in wall for crossing and making good the same if required complete in all respect with required accesories as desired by Engineer- In- Charge. G.I. Sheet Metal Ducting (Rectangular) 24 Gauge (thickness 0.63mm sheet)

Providing,fixing, balancing, commissioning and testing of Site fabricated sheet metal ducting complete with supports, dampers, vanes etc. as per specifications and drawings including cutting in wall for crossing and making good the same if required complete in all respect with required accesories as desired by Engineer- In- Charge. G.I. Sheet Metal Ducting (Rectangular) 22 Gauge (thickness 0.80mm sheet)

Duct Insulation Providing and Fixing cross linked elastomeric nitrile insulation with class 'O' , FM approved, with anti microbial treatment on ducts complete as per specifications and drawings. 9 MM thick

Duct Acoustic Lining Providing and Fixing duct acoustic lining with Fiber Glass insulation with tissue paper & alluminum jalli insulation covered with perforated aluminium sheet, nuts, bolts etc. complete as per specifications and drawings. 25 MM thick

Grilles/Diffusers/Louvres Providing and Fixing Extruded aluminium supply and return air grilles/diffusers/louvres, extruded aluminium dampers, supply air plenum etc. duly powder coated as per specifications and drawings.

Underdeck Insulation Underdeck insulation with expanded polystrene complete in all respect with required accesories as desired by Engineer- In- Charge. 50 mm thick

Microprocessor Based 1-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition and FM complete in all respect with required accesories as desired by Engineer- In- Charge. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition. FM Approved. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Beam Detector. The beam detector shall be used for High Ceiling application with a detection range upto 100 mtrs having 4 manual & 2 auto sensitivity settings. The beam detector shall be True addressable installed on the SLC circuite & communicate directly with the panel without any interface module. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed complete in all respect with required accesories as desired by Engineer- In- Charge.

Directional Sounders with 20 hz to 20 khz operating frequency with minimum 8 distinct sound patterns to indicate corridors, Exit doors, Move upward, move downward etc. to direct Occupants for fast & safe Evacuation complete in all respect with required accesories as desired by Engineer- In- Charge.

Addressable Fire Fighter's Telephone Jack with suitable supervised module for two way communication between Remote Fire Fighter & Fire Command Center. UL Listed complete in all respect with required accesories as desired by Engineer- In- Charge.

Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply and laying of 2 C X 1.5 Sq mm multi stranded twisted unshielded FRLS Copper cable complete in all respect with required accesories as desired by Engineer- In- Charge.

Providing and fixing auditorium chairs as per specifications as below: The seat shall be made of Polyurethane Foam moulded with 1.5 ±0.1cm. thk. plywood insert and shall be upholstered with fabric. Approx. Seat Size shall be: Depth: 42.0cm. Width @ rear: 44.0cm. Width @ front: 41.0cm. The back assembly shall be flexing type and made ofPolyurethane Foam moulded with MS. tubular frame insert and shall be upholstered with fabric and back cover. The insert shall be made of 01.9 ±0.02cm x 0.16 ±0.0.128cm. thk.MStubular frame with flexible nylon straps running across the length and width of the frame.Approx. Back Size shall be: Height: 75:0cm, Width @ top: 34.5cm, Width @ seat level:46.0cm. The HR polyurethane foam is moulded with density = 45 +/-2 kg/m3. The-backcover and mechanism cover shall be vacuum formed from black ABS sheets. The Armrest understructure shall be upholstered PU foam moulded with MS insert. Arm tops shall bemade of black Integral Skin polyurethane with 50-70 Shore 'A' Hardness & reinforced withwooden insert. Armrest width= 7.0 ±0.5cm and shall be offered as common/individualarmrest between chairs. MS black powder coated (DFT 40-60 microns ) understructure with integrated, auto tip-up mechanism which folds the seat when not is use. Footprint area of base plate: made of HR steel 15.0 ± 0.2cm X 22.0 ± 0.2cm X 0.5 ± 0.05cm thick. Backrest supporting beam width: 46.0 ±0.2cm.(L) x 8.0 ±0.03cm. x 4.0 ±0.03cm. x 0.2±00.16cm MS tube. Understructure shall be fixed to ground by anchors with washer and nut. The auditoriumchair shall be designed to get mounted/grouted on floors with flooring specification asmentioned in flooring pre-requisite Godrej doc-no: STG 129368. Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Height - 101.0 cm, Width & Depth of Chair Width(w1)-60.0cm(individual), width(W) - 53.0 cm.(common arm) and Depth-64.0cm.(normal) , Depth(D2)- 49.0(seat folded). The backseat shall be fixed and chair bottom shall be moveable complete in all respect with required accesories as desired by Engineer- In- Charge. (Make-Penworker,Godrej, Haworth)

Providing and fixing in position wall acoustic panelling made from Rubber Wood Strips of various width and 12 mm thick over already existing GI/Al frame & 50mm thick 1000 GSM Non woven thremal bonded polyester wadding with chiken mesh jali of 24 guage on wall and finished with 3 coats of melamine matt polish including sealer coats of approved tint including cost of required cut-outs, with required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. (Make:Acoustika,Armstrong,Anutone)

Providing and fixing in position IFR Grade fabric in required color fixed with synthetic grippers over already existing GI/Al frame & 50mm thick 1000GSM Non woven thremal bonded polyester wadding with chiken mesh jali of 24 guage & 20mm thick wood wool board including cost of required cut-outs complete in all respect with required accesories as desired by Engineer- In- Charge.MAKE:Anutone,Acoustica,Armstrong

Providing and laying of 50mm thick 1000GSM Non woven thremal bonded polyester wadding to be laid in cavity behind wall panelling to be fixed with chicken mesh jali of 24 gauge at all heights complete in all respect to the entire satisfaction of the engineer-in- charge. (Note: The Contractor to submit Manufacturing Test Certifate), required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. Make:Dupont,Armstrong,Acoustika,Anutone

Providing and fixing in position Aluminum pipe framing of 50 x 50 mm, weighing 0.88 kg/mt of required square aluminum pipe dimension at 600 x 600 mm center to center both ways, withrequired aluminum pipe cleats and aluminum studs / brackets of aluminum pipe of required length provided at 600 mm center to center to keep framing away from wall and ceiling at required angle with required scaffolding as per detail. Architectural / Acoustic design and drawings complete in all respect with required accesories as desired by Engineer- In- Charge. (Make:Tata, Jindal,Hindalco)

Providing and fixing seamless false ceiling of 12 mm thick Gypsum Board ceiling curved in plan/section as per detailed drawings. Rates shall be inclusive of making cut-out of lighting fixtures, A.C.diffuses and providing additional chanel for support of the same with required scaffolding. No extra for providing additional support/chanel shall be paid and no deduction of cut-out shall be made etc.complete in all respect with required accesories as desired by Engineer- In- Charge. (make:TATA,Armstrong,Saint gobain,Boral)

SOFT/GLASS FIBER ACOUSTICAL CEILING:- Providing and Fixing of Soft Fibre Acoustical Suspended Ceiling System at all heights as per drawings with Board edge tiles 600 x 600 x 15mm with 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9, Light Reflectance 85%, Colour White/Black, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and 7) suitable for Green Building application with recycled content of 66% GW and 74% RW%. Tile laid on 24 mm wide T - section flanges of colour black/white having rotary stitching on all T sections i.e. Main Runner, 1200 mm and 600 mm Cross T with a web hgt of 32mm and a load carrying capacity of 15.34Kgs/M2, with required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. (Make::TATA,Armstrong,Saint gobain,Boral,Anutone or eqivalent)

Providing and fixing in position Teak Wooden flooring planks of size 25 mm thick (Finished) of size 100 x 25 mm of minimum 1.00 mt length fixed on 18 mm thick water proof plywood in "Tongue and Groove" fashion as directed. 18 mm thick water proof plywood shall be supported on 50 x 50 mm thick sal wood battens fixed at 600mm c/c both ways with 2 coat of anti-termite chemical. Sal wood frame will be rested on 75 x 75 x 5 mm thick neoprene pads at every joint. Teakwood floor shall be polished with minimum two coat of matt finish Melamine spray polish over a sealer coat with necessary staining and sanding etc.complete in all respect with required accesories as desired by Engineer- In- Charge. (Make:Greenply ,Duraply,Centuryply)

Providing and Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100% Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year replacement guarantee etc.complete in all respect to the entire satisfaction of engineer-in-charge. (make:Outvie,Carpeteria,Flotex or equivalent)

Providing & Applying 3-6mm layer of epoxy based self levelling compound to give perfect level for flooring complete in all respect with required accesories as desired by Engineer- In- Charge.

Fire Rated/Acoustical Wooden Doors: Supply and fixing of 70mm thick 38 db acoustic door having infill of 47mm thick resin bonded glasswool of 24kg/ M3 density coated with FR Acrylic Sealant Sandwiched between two 9 mm thick starpan calcium sillicate boards without asbestos, Brucite and Meerschaum having a density not more than 1150kg/ M3 and thermal conductivity 0.14 W/MxK faced with 6mm thick commericial ply with heat activated intumescent fire seal strip of size 10mm x 4mm mounted in the grooves having hardwood lipping of size 15mm x 70mm and 1mm thick laminate facing on both sides in desired shade and colour. The rate should also include Red Merrandi Frame 145 x 70mm with Commercial Ply Facing (6mm +1mm laminate on both sides)complete in all respect with required accesories as desired by Engineer- In- Charge. (make :greenply,duraply, centuryply )

Providing and fixing of Double Leaf Panic Bar set along with Panic Trim for operation from the other side of the Panic Bar Complete in all respect to entire satisfaction of the engineer-in-charge.(make:hettich,becker,marshal)

Providing and fixing SS Ball Bearing Hinges of size 100 x 75 x 3mm fixed with SS Screws Complete in all respect to the entire satisfaction of the engineer-in-charge.(hettich,becker,marshal or equivalent)

Providing and fixing of Heavy duty door closer complete in all respect to the entire satisfaction of the engineer-in-charge. (hettich,becker,marshal or equivalent)

Providing and fixing 25mm dia & 400mm long brushed steel finish pull handles with long bolt and cap for fixing from outside complete in all respect with required accesories as desired by Engineer- In- Charge.(hettich,becker,marshal or equivalent)

Providing and fixing blinds of desired colour and shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 5% ,Fabric value : 465 gsm , Thickness : 0.65 mm Fabric to be as per approved sample complete in all respect with required accesories as desired by Engineer- In- Charge.

Provinding and fixing of Main Curtain made out of velvet curtain cloth flammability BS EN 1021-1:1994 with upwards rolling arrangement and motorised operation complete with runners, runners, master runner,pullies,steel wire rope required thickness and strength,1 HP motor(make cromton, kirloskar or equivalent as approved by EIC) of required number,air breaker contactors(make L&T,SIEMENS,Schneider)of required number,push button to roll and unroll or stop positions.The curtain should be draped to upwards when in closed position complete in all respect with required accesories as desired by Engineer- In- Charge. (Fabric Make:Raymonds,outive,Response, Nexgen)

Provinding and fixing of rear Curtain made out of velvet curtain cloth flammability BS EN 1021-1:1994 with sliding arrangement and motorised operation complete with runners, runners,master runner,pullies,steel wire rope required thickness and strength,1 HP motor(make cromton,kirloskar) of required number,air breaker contactors(make L&T,SIEMENS,Schneider)of required number,push button to roll and unroll or stop positions with required scaffolding.The curtain should be draped to when in closed position complete in all respect with required accesories as desired by Engineer- In- Charge.. (Fabric Make: Raymond, JC Joel, Response, Nexgen)

Provinding and fixing of velvet cloth (outvie) black fabric flammability BS EN 1021-1:1994 (cigarette) as per approved sample fixed over the metal framework metal framework made out of 2"x 2" squre MS pipe specification complete for wings Measurement will be made for external dimensions including heading for payment Size 18' x 4'complete in all respect with required accesories as desired by Engineer- In- Charge. Make Response/Raymonds/Nexzen/outive

Providing and fixing of frills in double gathering box pleats stiched ou of valvet fabric of flammability BS EN 1021-1:1994 (cigarette) The frill to be fixed from the suspension grid with 38 mm dia B class ms pipe suitably hung by mean of 35x4mm MS flat. The pipe & flat to be painted with black enamel paint size 53' x 3' complete in all respect with required accesories as desired by Engineer- In- Charge. .Make Response/Raymonds/Nexzen/outive

Providing and fixing in position Acoustical Panelling made from Wood wool board 20 mm thick over existing GI/AL frame & 50mm thick 1000GSM Non woven thremal bonded polyester wadding with chiken mesh jali of 24 guage as per detailed Architectural - Acoustical design & drawings etc. with required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. (Make:Anutone,Fibertex, Duratax )

S/E of rechargeable Emergency Exit light for auditorium as per Fire safety specifications complete in all respect with required accesories as desired by Engineer- In- Charge.

S/E of 2/3 watt footlight for stairscomplete in all respect with required accesories as desired by Engineer- In- Charge. Make Crompton/Wipro/Polycab/Jaquar or equivalent make as approved by EIC

NANDA CONSTRUCTION COMPANY

SRISHTI ENTERPRISES

NANDA CONSTRUCTION COMPANY

IND-AGIV COMMERCE LIMITED