Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | L1 | Accepted-AOC 1ST LOWEST | |
| 2 | Rejected-Technical | - | Rejected-Technical 2ND LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical 3RD LOWEST |
| Sl No | Description | Qty | Unit | SHYJU K M L1 | HARILAL T V L2 | N JANARDHANAN L3 |
|---|---|---|---|---|---|---|
| 1.00Mini MCF | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.67 | cum | 284.98 ₹191.51 Lowest | 291.09 ₹195.61 | 298.47 ₹200.57 |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.67 | cum | 6,284.54 ₹4,223.21 Lowest | 6,419.29 ₹4,313.76 | 6,582.18 ₹4,423.22 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,082.13 | kg | 148.18 ₹3,08,530.17 Lowest | 151.36 ₹3,15,151.35 | 155.2 ₹3,23,146.73 |
| 1.00 | 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. | 257.6 | sqm | 965.51 ₹2,48,715.38 Lowest | 986.21 ₹2,54,047.7 | 1,011.25 ₹2,60,498 |
| 1.00 | OD239234/2025-2026:Providing and fixing AluZinc profile sheets(size,shape and pitch of corrugation as approved by
Engineer-in charge)0.40mm(+0.05%),thickness. Sheet should have protective guard film of
25microns minimum to avoid scratches during transportation and should be supplied in single
length upto 12metre or asdesiredbyEngineer-in-charge. The sheet shall be fixed using self
drilling/selftapping screws of size(5.5x55mm)with EPDM seal ,complete upto any pitch in
horizontal/vertical orcurvedsurfaces ,excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required. (MOD 12.50 of DSR ) | 163.1 | sqm | 457.07 ₹74,548.12 Lowest | 466.87 ₹76,146.5 | 478.73 ₹78,080.86 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 353.61 | sqm | 130.6 ₹46,181.6 Lowest | 133.41 ₹47,175.24 | 136.79 ₹48,370.45 |
| 1.01 | OD239241/2025-2026:Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminimum sheet
as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two
or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including
appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and
erecting the same in position all complete as per drawings, specification and direction of the
Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ). | 7.56 | sqm | 2,077.42 ₹15,705.3 Lowest | 2,121.97 ₹16,042.09 | 2,175.81 ₹16,449.12 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 700 | per Letter per cm height | 5.02 ₹3,514 Lowest | 5.13 ₹3,591 | 5.26 ₹3,682 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 38.5 | metre | 447.64 ₹17,234.14 Lowest | 457.24 ₹17,603.74 | 468.84 ₹18,050.34 |
Tender Value
₹8.5 L
EMD Value
₹21,173
Closing Date
27 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer
Assistant Engineer Eramam kuttur Gramapanchayath
ProjNo 284/25 Construction of mini MCF in various Wards
2025_LSGD_800327_3
128/25-26
Open Tender
Civil Works - Others
Item Rate
mathamangalam
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,173
Yes
30 Dec 2025
20 Sept 2025
29 Sept 2025
20 Sept 2025
27 Sept 2025
20 Sept 2025
Amount
Mini MCF
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge.
OD239234/2025-2026:Providing and fixing AluZinc profile sheets(size,shape and pitch of corrugation as approved by Engineer-in charge)0.40mm(+0.05%),thickness. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or asdesiredbyEngineer-in-charge. The sheet shall be fixed using self drilling/selftapping screws of size(5.5x55mm)with EPDM seal ,complete upto any pitch in horizontal/vertical orcurvedsurfaces ,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR )
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD239241/2025-2026:Manufacturing, supplying and fixing signage boards made up of 2 mm thick aluminimum sheet as approved by Engineer-in-Charge, letters, borders etc. including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminimum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the Engineer-in-Charges. (Rectangular area of the sheet only shall be measured for payment ).
13.71:Lettering with black Japan pint of approved brand and manufacture
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
HARILAL T V (BID ID -2362424)
N JANARDHANAN (BID ID -2360277)
Bidder Name
SHYJU K M
HARILAL T V
N JANARDHANAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1327642.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .