Loading…
Loading…
Tender Value
₹5.0 Cr
EMD Value
₹5.0 L
Closing Date
28 Sept 2026, 6:00 pmClosed
Assistant Manager (North West Zone)
Repairing of Potholes & Heavy Patch work with Milling in Thaltej Ward in North West Zone of Ahmedabad Municipal Corporation (ARC)
344173
TN/2627/06/52
Open
Civil - All
Works
Ahmedabad
5 documents required · 5 mandatory
₹12,000
Municipal commissioner, Ahmedabad
₹5.0 L
11 Sept 2026
11 Sept 2026
11 Sept 2026
28 Sept 2026
11 Sept 2026
Name of work : Repairing of Potholes & Heavy Patch work with Milling in Thaltej Ward in North West Zone of Ahmedabad
Municipal Corporation (ARC)
QTY. ITEM RATE PER AMOUNT
1 1000.00 Excavation for foundation upto 1.5 m depth including sorting out and 115.92 Cmt
stacking of useful materials and disposing off the excavated stuff upto
Meter lead.(A) Loose or soft soil.
(Item Code : 04001A, SOR 2023-24, R & B Ahmedabad City)
2 Conveyance charge of earth, lime, murrum, building rubbish, manure,
garbage, sludge, excavated rock, fly ash, aggregates of any kind executed
outside the road site. Rate also includes spreading & levelling etc complete.
Internal conveyance above 50 mt done within the work site is not payable.
1000.00 f) Lead From 5 Km to 10 Km. 78.54 Cmt
1000.00 g) Lead From 10 Km to 15 Km. 104.65 Cmt
3 Repairing damaged M.H. and rasing M.H. up to road level incl. removing
damaged brick work and repairing by brick masonry in C.M. 1:5 and plaster
in C.M. 1:3 and fixing C.I. steps and existing MH sheet cover, removing the
debris from MH and carting the same as directed.
a 50.00 (A) up to 0.15 mt. (@ Two Coarse) 728.82 No.
b 50.00 (B) up to 0.35mt. (@ Four Coarse) 1155.44 No.
c 50.00 (C) up to 0.65 mt. (@ Seven Coarse) 1786.49 No.
4 50.00 F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover : 3354.74 Set
728mm ø & 100 mm thick circular cover, 35.00 MT load design, 100x2mm
MS flat allround, 16mm ø plain round bar for lifting the cover & should be
fitted with plastic cups. Frame : 560 mm ø clear opening, outer size-
888x888x175 mm. On the upper periphery of frame 25 x 3 mm wide MS flat
should be well embed in concrete to protect the edges of frame. FRC
E.H.D.-35 manhole cover & frame described as above
5 50.00 Constructing Bombay Pattern Type Catch Pit of size 0.60 x 0.60 depth up to 3110.80 No.
1 mt including excavation, B.B.C.C. (1:5:10), 23 cms thick brick maso. wall in
the prop. of CM (1:6) with 40 mm thick IPS flooring in the prop M15 at
bottom and 15 mm thick cement plaster inside the catch pit in the
proportion of CM (1:3) with out jali etc. comp. as directed.
6 50.00 CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit jali with frame 600mm x 1377.64 No.
600mm clear opening etc. comp.. As directed by engineer in charge.
7 Providing, laying, spreading and compacting graded stone aggregate to 1739.38 Cmt
Wet Mix Macadam specification including premixing the Material with
water at OMC in mechanical mix plant carriage of mixed Material by tipper
to site, laying in uniform layers in sub- base / base course on well prepared
surface and compacting with vibratory roller to achieve the desired density
as per Codal Provision.
a 500.00 Production & Supply of WMM 1708.13 Cmt
b 500.00 Laying of WMM 31.25 Cmt
8 Dismantling the following including loading, unloading and disposal of
unserviceable material for all lead or as directed by Engineer-In-Charge and
stacking the serviceable material and backfilling the resulting trenches and
a 100.00 Demolition & disposal of unservisable material with all lead and lift for 348.10 Cmt
unreinforeced concrete. (AMC sor)
b 100.00 Demolition of Brick work and stone masonry including stacking of 544.95 Cmt
serviceable materilas and disposal of unserviceable materials with all lead
and lift. (ii)In Cement Mortar.
(Item Code : 20003B, SOR 2023-24, R & B Ahmedabad City)
c 100.00 Demolition including stacking of serviceable materilas and disposal of 1047.38 Cmt
unserviceable materials with all lead and lift. (i) R.C.C. work.
(Item Code : 20002, SOR 2023-24, R & B Ahmedabad City)
9 Extra rate over item of excavation of earth for excavation of asphalt
pavement/RCC of thickness up to 0.20 meter including demolishing the
asphalt carpet, metal,s oiling/cutting Reinforcement etc.comp. with
stacking the material as directed. (Based on Previously approved rate by C E
a 100.00 up to 0.20 meter thickness (By Manual) 71.10 Smt
b 1000.00 0.20 to 0.30 meter (By any type of Breaker Machine or R.C.C.Cutter 177.76 Smt
machine including cost of operator, fuel, & transportation etc complete.
c 2000.00 0.30 meter & above (By any type of Breaker Machine or R.C.C.Cutter 311.08 Smt
machine including cost of operator, fuel, & transportation etc complete.
10 500.00 Hiring Charges For J.C.B.Machine Inclduing Cost Of Fuel, Operator, Dirver 600.00 Hr
11 500.00 Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing 600.00 Hr
Work on site by using Operator, fuel, power Supply etc. Complete as
Directed. (No payment should be allowed for non working condition of
machinery and for pipe line excavation and M.H. work. Allowed only for
break down work) (Based on Previously approved rate by C E sir )
12 Constructing Slab type M.H. Chamber of the following size including
excavation, refilling, brick bats cement concrete (1:5:10) of thickness
C.M., CC Channel (1:2:4) of thickness 10 C.M., finished 15 mm thick cement
plaster inside & outside (Only for shaft) in CM 1:3, finishing with cement
slurry, P/F 4 mm dia M.S.Steel HDPE coated steps 35 cm c/c at 35 cm
staggered in masonary CM 1:5, RCC Slab in CC 1:1.5:3 of thickness 23 C.M.,
including Cantering & reinforcement (double jalli at 15 C.M. c/c bothway
mm dia.) but excluding the cost of Manhole seat cover etc..completed. of
Size 1.00 X 1.40 meter (Inside Clear, M.H. length should be parallel to
a 1.00 1.00 to 2.00 meter depth, (Slab at Ground level) 10177.68 No.
b 1.00 2.00 to 3.00 meter depth, (Slab at below 0.6 mt. From G.L.) 19258.04 No.
c 1.00 3.00 to 4.00 meter depth, (Slab at below 1.00 mt. From G.L.) 26867.86 No.
13 55215.00 Repairs to the Pothole/Heavy Patch work having Depth up to 75 mm with 843.75 Smt
Cold Milling Machine. Back filling with Cold Mix Material/ Hot Mix Material,
laying with Hand laying or Paver Machine to match the existing surface etc.
as directed by the engineer in charge. (work carried out as per the given
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ TN 52 Milling Heavy Patchwork Volume II Price l bid.pdf
TN 52 Milling Heavy Patchwork Volume I Technical bid.pdf
TN 52 Milling Heavy Patchwork Volume II Price l bid.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .