Repairs renovation to toilets and bathroom of Girls Hostel of Trailokya Bauddha Mahasangha Sahayaka Gana Vishrantwadi Pune under CSR activity of High Explosives Factory Khadki Pune

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing Serviceable tiles to store and rubbish off the premises

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Removing building material to the distance 5Km from the site.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil

Removing excavated material n exc. 50m and depositing where directed at a level n exc.1.5 m above the starting point in soft/loose soil

M & L for soling (or sub base) 100mm thick with broken boulders or quarried stone, interstices filled surface, formed, rolled & consolidated to required gradient & camber including watering & ramming etc. complete.

M & L for moorum/red bajri filling in pavings, laid in layers n. exc 15cm thick. Spread, levelled & rommed including watering, etc complete

M & L for 75 mm thk plain cement concrete type B1, 1:2:4 mix, using 20 mm graded aggregates, in sub-floors, floors, paving including shuttering etc. & finishing the surface of concrete pavement by using extra cement & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green

M & L for 100 mm thk plain cement concrete type B1, 1:2:4 mix, using 20 mm graded aggregates, in sub-floors, floors, paving including shuttering etc. & finishing the surface of concrete pavement by using extra cement & Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green

M & L for Dismantling of Brickwork or stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L for Brick work with sub class 'B' bricks straight on plan, built in 1:6 cement mortar, using straight, sharp edge, uniform size and shape brick

Rendering 15 mm thick even & smooth cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mix without using extra cement even smooth and applying neeru finishing

Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) with Sand-faced plaster as specified

M & L Rendering 20 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4.

M & L for providing 20mm thick Screed bed or bedding layer in cement mortar 1:6 mix for laying floor finishes

Supplying and mixing of integral water proofing compound.

M & L for non-skid ceramic tiles 7 to 8mm thick in dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, make- bell, Somany, Johnson, Kajeria

M & L for Glazed coloured ceramic tiles 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store

M & L for Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store →

M & L for Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store →

S & F Unplasticiscd PVC 15 mm pipes of pressure rating 10 kgf/cm2 laid in trenches

S & F Unplasticiscd PVC 20 mm pipes of pressure rating 10 kgf/cm2 laid in trenches

S & F Unplasticiscd PVC 25 mm pipes of pressure rating 10 kgf/cm2 laid in trenches

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified.

Supplying and laying of 15mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified.

S & F Stop valve of 15mm PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms) →

S & F Stop valve of 20mm PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms) →

S & F of Stop valves 25mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F of Stop valves 20mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F of Stop valves 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F Angle stop valve of 15mm PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

M & L for Taking down washbasin, W/C pan of any size, shape & type, including all accesseries, and shifting the same to store.

Dismantling wrought iron or mild steel work (ventilator) of any description not otherwise provided for & removing to the store.

S & F for100 mm size CI nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4)

S & F of vitreous china wash basin size:- 630x450mm ordianry fixing to walling, with fixtures and fastners with waste coupling of bore 40mm.

S & F of 15 mm bore dia of pillar tap chromium plated cast copper alloy,fancy type screwed down , high pressure & long screwed shanks & fly nuts screwed for iron pipe & fixed,

S & F for wash basin, rubber tube ½''ϕ connecting angle cock to washbasin flexible with threaded head both side

S & F of 15 mm bore dia Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

M & L for rain showers: - overhead showers size 125mm, Shower arm 15 mm size 195mm long with bend of 45degree with flange of PTMT any color (minimum weight 40 gms)

S & F of Brass CP 15 mm bore dia. mixer for mixing hot & cold water screwed down for iron pipe and fixed

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) & Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete.

S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580x440mm white, with integral foot rests complete including squatting pan including connection to trap S or P of 100mm bore pipe, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor but including trap set in and including concrete

S & F of PVC valveless, syphonic action type, flushing cistern of 10 lit. cap, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes.

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S & F for Flush pipes to pedestal pan, including all joints

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm

M & L for tubular round Brass chromium plated Towel Rail 20mm

M & L for Brackets of tubular round Brass chromium plated Towel Rail 20mm

M & L for health faucet (ABS body), mild steel chroumium plated suitable fo 15mm dia pipe with 1.25 metre long fexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M & L for Waste fittings of 40mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S & F of PVC 110mm (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) 110mm bends any radius

S & F PVC 110 mm (SWR) junction single, (Single T) equal or unequal

S & F PVC 110mm (SWR) vent cowl

S & F Plain Mirror of size 600x450mm with aluminium frame etc. complete. Glass- saint gobain.

M & L for cement concrete type D-2, 1:4:8 mix using 40mm graded aggregate in foundation, filling and mass concrete

M & L for Providing cement concrete Type B0 1:2:4 mix using 12.5mm graded aggregate, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M & L for cement concrete type B2 1:2:4 mix using 40mm graded aggregate in foundation, filling and mass concrete

M & L for reinforced cement concrete type B1, 1:2:4 mix using 20 mm graded aggregates (nominal mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete

Fair Finished Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M & L for Mild steel TMT bars 10mm & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Mild steel TMT bars 6mm dia to 8mm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Providing precast cement concrete in landings, cover slabs (for manholes etc.) in Type B1 1:2:4 (20 mm graded agregate) to set in cement mortar 1:4 with plain faces.

M & L for preparing of surfaces on old surfaces & applying two coats of White washing on ceiling.

M & L for chalk whitening on plastered surfaces preparatory to distempering & apply two coats of oil bound distemper on wall.

M & L for preparing of surfaces on old surfaces & applying two coats of cement based paint on wall surfaces.

S & F of figured glass 4mm thk, pin head type and glazing with oil putty in squares exc 0.5 sqm in each pane

S & F of powder coated aluminium windows of Jindal make as approved by HEF authority, consisting of three track channel and three track sliding shutters with sections of size 92 x 32 mm for bottom, top & sides as frame sections, 40 x 18mm shutter sections including Neoprene gasket, Mosquito net, nylon encased, SS rollers, locking arrangement etc. in 18 G all as specified and directed complete

S & F of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness of powder coated not less than 50 micron)

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S & F of 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane.

Dismantling & removing existing wooden door of any size and shape and type with wooden shutter & frame along with its fittings, etc. complete

S & F Flush shutters of 40mm thk, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping /frame to match

S & F of brass handles, cast type, polished bright of 125mm size

S & F of Floor door stopper of brass body 150mm & tongue, anodised,with hard drawn steel spring, fixed in floor

S & F of Brass barrel tower bolts, with length of bolt 150 mm cast or sheet barrel & rolled or cast bolts & fixed

S & F of Butt hinges, brass, with mild steel hinge pin, bright polished and fixed, type B-11 with 100mm in size

S & F of brass, sliding door bolt of 300 mm in length with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L for Running welding in repairs exc 9mm but n exc 20mm

S & F of Fe-410-W(Gde-E-250) quality-B roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thk of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified

M & L for preparation of old surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint on one coat of redoxide on steel surfaces.

M & L for Mild steel screw bolts (machine made 16MM TO 20MM) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S & F Electrical water storage geyser, Capacity - 25 liters, BEE rating - 5 star, Rated power - 2kw, Adjustable knob forn temp. setting, Auto cut-off, IPX-4 protection, multifunction safety valve, PUF insulation, Warranty -2 years (Min.)

YASH ASSOCIATES (BID ID -874157)

AYUSH CONSTRUCTION (BID ID -877233)