Renewal coat Macadamisationand maintenance of road from Kundi to Birjala Package No JK03_87 Length 2.85 Kms PMGSY DIV URI.

Amount

Pavement

Scarifying the existing bituminous road surface by mechanical means & disposal of scarified material with a lift up to 3m. & lead up to 1000m as per technical specification clause 301 .4 .

Providing & laying Bituminous macadam, 50 mm thick, with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site including all leads,liftsf, laid over a previously prepared surface with paver finisher to the required grade, level & alignment and rolled to achieve the desired compaction as per MORD technical Specification Clause 504,including cost and carriage of material from source to site of work, with all leads, lifts, loading, unloading and octori. (Finished work to be measured, complete)

Tack Coat: Providing and applying tack coat using hot straight run bitumen grade VG-10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.1 on W.B.M @ 0.75 kg/sqm.

Tack Coat: Providing and applying tack coat using hot straight run bitumen grade VG-10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.2 on bitumen surafce @.5 kg/sqm.

25mm thick SDBC :- Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in- Charge. 25 mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity including cost and carriage of all materials from approved source to site of work with all leads lifts loading and octroi complete job.( finished work to be measured)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A ,Type B and Type C as per Technical Specification Clause 510.specification 1995) By Mechanical Means Type B Bitumen (S-90) including cost and carriage of all materials from approved source to site of work with all leads lifts loading and octroi complete job.( finished work to be measured.

Maintenance for Five Years

1st Year

2nd Year

3rd Year

4th Year

5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.

M/S Tech Builders