Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹23.3 L+₹2.5 L (12.3%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹25.5 L+₹4.8 L (23.1%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹26.0 L+₹5.2 L (25.3%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹29.4 L+₹8.7 L (42.1%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
COMPREHENSIVE MAINT TO CERTAIN JCOS MD ACCN AND MAP PH-II AT ASHOK NAGAR AREA UNDER AGE B/R (EAST) AT GE DEHU ROAD
2022_MES_543406_2
8669
Open Tender
Civil Works
Item Rate
270 days
GE Dehu Road, Pune
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹60,000
Yes
21 Oct 2022
6 Sept 2022
5 Oct 2022
6 Sept 2022
3 Oct 2022
20 Sept 2022
Amount
Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.
Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.
Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.
Demolition of concrete ( un reinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)
Dismantling wrought iron or mild steel work of any description not otherwise provided for .
Dismantling of PVC water tank of capacity exc 250 litre and n. exc 500 litre and complete all as specified and directed.
Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for above ground level complete all as specified and as directed.
Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.
S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)
M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.
S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructions with all fittings and accessories etc complete.
All as per item No.13 above but plain sheet fix in valley gutter / ridge
M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.
Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.
Disconnecting existing PVC water tanks of capacity 1000 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
Fixing only water tanks of capacity 1000 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes.
M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.
Ditto as item No 20 above but n'exc 1.5 Sqm each.
Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.
Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded .All as specified.
Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.
S&F aluminum powder coated window and ventelator shutter sliding type two way with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete .
S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete
S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.
S&F 3.0 mm th sheet glass ordinary quality plain and glazing with oil putty in square n'exc .5 sqm in each pane.
S&F 4.8 mm th sheet glass plain and glazing with oil putty in square n'exc .5 sqm in each pane.
S & F of 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F of 100 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.
S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.
S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L 25 mm thick P.C.C 1:2:4 type B-1 using 20 mm graded aggregate in sub base
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.
M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.
All as per item No 48 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.
M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete
Ditto above item No 50 but on skirting over 10 mm th rendering in CM 1:4 complete.
M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.
S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.
Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.
All as per item No. 55 above but bore of pipe 20mm
M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm
All as per item No. 57 above but bore of pipe 20mm
S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.
S&F in repairs bib taps cast copper alloy with capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.
S & F in repairs pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.
S & F in repairs Brass cromium plated with capstan headsshower rose of 125 mm dia complete all as specified.
S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)
S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified. (Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit)
S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.
S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm
S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).
S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce.
S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .
S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod fixed to brackets complete all as specified and directed.
S&F aluminium anodised brackets for 25mm dia curtain rods complete all as directed.
M & L 50 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .
Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.
M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement.
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement.
M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls.
M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemper on walls.
M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.
M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.
M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L One coat of synthetic enamel paint on old painted steel surfaces over 10 cm width or girth incl prepration of surfaces complete
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.
M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.
M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.
M& L Chequared Cement Concrete Tiles 20 CM x 20 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.
S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling all as specified
M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid comlplete as specified
S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.
M & L for cleaning of existing surface vertical wall area , roof top by removing all loose wornout quickly materials carrying out necessary repairs to damaged pointing and make surface ready to recive the waterproofing treatment.
M & L for providing waterproofing to wall, roof surface using super Aquacrete/Aqa proof 102 (Tested as per IS 2465) @ 3 Kg/Sqm as per following specification. Layer I: M & L for painting one coat polymer slurry @ 1 Kg /Sqm. Layer II: M & L for providing MRP 1st class membrane (in case of treatment to roof surface.) Layer III: applying two coats of polymer slurry @ of 2 Kg/Sqm as per the manufacturers specification and directions
S & F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
M & L for Sand filling under floors or in foundations including watering and consolidation
S & F in repairs Pulley Operated Cloths Drying system of 7 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Enge-in-charge.
S & F in repairs Pulley Operated Cloths Drying system of 8 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Enge-in-charge.
M&L for cement conceret 1:2:4 Type B-2 Using 40 mm graded stone aggregate as in surface channel and drain bed wall and floor etc.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
H S TAKHI
M/S B.A. GAIKWAD
L.K.R.TIWARI CONSTRUCTION
A S Shingote
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .