REPAIR/MAINTENANCE TO TOILET BLOCKS IN OTM ACCOMMODATION AND SERVANT QUARTERS IN MARRIED ACCOMMODATION AND PERIODICAL SERVICES TO OTM ACCOMMODATION AT CENTRAL ZONE UNDER GE (NORTH) BINNAGURI

Amount

Taking down existing roof treatment(water proofing membrane etc) including screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50 m and n. exc. 100 m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust, etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) mixed with liquid water proofing compound @200 ml per bag of cement or as per manufacturer's instructions order to maintain proper slope over existing roof surfaces, rendering is to be finished even and smooth (without using extra lime or cement) for laying brush bond waterproofing coating complete all as specified and as directed. Note: Water proofing treatment shall be paid and measured separately.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard or techno commercially equivalent make as listed in List of Makes in 4 coats of application (a) Applying primer coat with Primer @ 0.3 Kg /Sqm (b) Over priming coat applying roof guard or techno commercially equivalent make as listed in List of Makes and as per manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard or techno commercially equivalent make as listed in List of Makes @0.75Kg/sqm. (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.

Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for prepare the wall and floor surfaces of sunken portion of toilet and applying the water proofing materials BRUSH BOND RFX & NITO BOND BBX or techno commercially equivalent make as listed in List of Makes including PCC 1:2:4 (20mm graded stone aggregate) as per manufacturer's instructions complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest complete including provision of cement concrete bedding complete all as specified and as directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

S&F 15mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm bore medium grade galvanised tube with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M&L for non skid ceramic tiles of size 400x400x7mm thick in floor etc set & 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for 300 x 450mm glazed ceramic coloured tiles in vertical surface not less than 7 to 8 mm thick set and jointed in neat cement slurry laid over 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match etc complete all as specified and as directed.

Supply & fixed in repair, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper including brackets, waste pipe & CP waste coupling complete all as specified and as directed. Make: Hindware Cat No. 10017 or techno commercially equivalent make as listed in List of Makes.

Taking down PVC/AC soil pipe including fittings as in wall of any dia complete all as specified and as directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

As per item No 15 above but for 75 mm dia complete all as specified and as directed.

S&F in repair 100mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B1 complete all as specified and as directed.

Supply & fixed in repair, Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.

S&F in repairs Bib taps fancy type chromium plated for 15mm bore pipe, screwed down for iron pipes or for brass ferrule all complete as specified and as directed.

S&F in repairs angular CP Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified and as directed.

S&F in repair, Vitreous china bowl urinal, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. Make: Hindware Cat No. 60001 or techno commercially equivalent make as listed in List of Makes.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection PVC flush pipe of required length CI brackets nin lieu of old unserviceable push button flushing cistern complete all as specified and as directed.

Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames)complete all as specified and as directed.

S&F for solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specifications and drawing complete all as specified and as directed.

S&F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colur PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplied and fixed in the frame at site as per specification and drawings complete all as specified and as directed.

M&L for aluminium alloy anodised handle fabricated 150mm long complete all as specified and as directed.

M&L for aluminium alloy anodised barrel tower bolts 150 mm long complete all as specified and as directed.

S&F butt hinges 100mm size, medium weight, cold rolled stainless steel complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:4 on facia, roof projection, chajja etc finished fair and even using water proofing compound @200 ml per bag of cement or as per manufacturer's instructions complete all as specified and as directed. Note: Water proofing treatment shall be paid and measured separately.

M&L for Rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed.

M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work with water proofing compound @200 ml per bag of cement or as per manufacturer's instructions finishing the surface even & fair without using extra cement complete all as specified and as directed. Note :Water Proofing Compound shall be measured and paid separately under relevant item of this Schedule 'A'.

Supply only liquid water proofing compound conforming to IS: 2645 - 2003 complete all as specified and as directed.

M&L for three coats of white wash on walls over newly plastered surfaces of wall including preparation of surfaces etc complete all as specified and as directed.

All as per item Ser No 36 above but three coats of white wash on ceiling complete all as specified and as directed.

M&L for applying two coats of colour wash over a coat of white wash on newly plastered surfaces of wall including preparation complete all as specified and as directed.

M&L for two coats of acrylic emulsion paint (weather coat) over newly plastered surface of wall and necessary preparation of surfaces including 1mm thick wall putty complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down to remove smoke soot moulds moss and efflorescence salts and treating oil and greasy spots etc and applying two coats of colour wash complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls including cornices, pilasters and other wall features etc by brooming down or steel wire brushing scrapping down to remove smoke soot moulds moss and efflorescence salts and treating oil and greasy spots etc and applying two coats of white washing on the same complete all as specified and as directed.

All as per item Ser No 46 above herein above but on ceiling complete all as specified and as directed.

M&L for two coat of applying acrylic emulsion paint (weather coat) over existing surfaces of wall, chajja, column etc and including necessary preparation of surfaces including wall putty/white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

Dismantling existing PVC water tanks exc. 500ltrs and n.exc 1000 ltrs complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F in repairs 25mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F in repair 15mm bore chromium plated shower roses with arm (size of arm 195mm long with bend to 45 degree) complete all as specified and as directed.

S&F in repairs 15mm dia fancy type chromium plated Stop valves long shank and cup(concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in iron pipe 15mm bore complete all as specified and as directed.

S&F in repair steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded confirming to IS 1038 complete as specified and as directed and as shown on drawing No. SZ/TD/219/99, Sheet 1/2 & 2/2 dated 17 Jun 1999.

S&F in repair steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded confirming to IS 1038 complete as specified and as directed shown on drawing No. SZ/TD/219/99, Sheet 1/2 & 2/2 dated 17 Jun 1999.

S&F in repair aluminum anodized louvered ventilators with glass louvers, without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down old complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperture 1.40 mm complete all as specified and as directed.

Demolition of brickwork built in cement mortar including complete all as specified and as directed.

M&L for brick works with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for granite work 18-20 mm thick table rubbed and polished as in top of kitchen slab over 15 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L rounding to edge of stone, granite slab, kota stone slab one edge, such as in steps, cooking platform and other similar work complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces any description over 10 Cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for applying average 20mm thick plaster in two coats (10+10mm) with ready-mix pre-packed proportioned dry mix mortar, blended with PP fibres, mixed with liquid water proofing compound on top layer on fair faces of brick wall or concrete surfaces additives on external surfaces including transporting of material, mixing, curing, scaffolding etc complete all as specified and as directed. Note : Liquid water proofing compound will be measured and paid separately as supply only.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and fair without using extra cement complete all as specified and as directed.

M&L for waterproof cement based putty of average thickness 1 mm and sand papering surfaces to achieve smooth surfaces over new plastered surface on wall / ceiling / chajjas after preparation of surface and applying two coats of distemper acrylic emulsion of approved tint over a coat of alkaline resistant primer with roller including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of new plastered surfaces on wall / ceiling / chajjas and applying Two or more coats of 10-0% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surfaces as per the manufacturer instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with flow speed of minimum 1 Ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, bed block, copings, filling concrete, gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height, in roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc including necessary form work as required complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls, chajja, facia, roof projection etc by washing, rubbing down and stopping and applying one coat of exterior emulsion paint 100% acrylic, white or tinted on old painted surfaces of walls including cleaning glass, joinery electrical fittings, wiring etc; of drops and splashes complete all as specified and as directed.

M&L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

M&L for preparation of surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coats of acrylic based distemper emulsion of any tint/shade with roller including wall putty / white cement wherever required to fill the wall cracks/holes complete all as specified and as directed.

M&L for preparation of old treated surface of ceiling by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash / colour wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of old treated surface of wall by brooming down or steel wire brushing; scrapping down smoke root, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

Material and labour for preparation of old / previously decorated surfaces of walls and applying one coat of cement base paints over a coat of alkali resistance primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

Material and labour for preparation and applying one coat of weather proof paint any tint on chequered cement tiles/ interlocking tiles / kerb stones surfaces including washing floors, cleaning glass, joinery etc of drops and splashes complete all as specified and as directed.

M&L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enameled paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed.

M&L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and as directed. Notes for all Painting and Water Proofing Items :- The following precautionary measures shall be ensured by the contractor before and during execution of the work:- (a) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicator as approved by GE and contractor should submit MOU with the manufacturing company or their authorised applicator before execution of work and entire work shall be executed with the approved firm. (b) Contractor shall deposit entire qty of materials (Proprietary material) in sealed containers required for painting works covered under subject contract in the custody of Engr-in-charge/ office-in-charge of unit. (c) The material as required shall be issued to contractor by JE / Engr-in-charge on daily basis and the empty container / bags shall be deposited in the store of Engr-in-charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufactures, (d) After completion of the painting works contractor shall remove and clean all the droplets / stain of paint left on the glass floor, glass and joinery.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down carefully existing old unserviceable sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete for one Light point controlled by one, one way switch complete all as specified and as directed.

All as per item Ser No 76 above here in before but for one ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item Ser No 76 above here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item Ser No 76 above here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item Ser No 76 above here in before but for one bell point controlled by one bell switch 5 Amps complete all as specified and as directed.

All as per item Ser No 76 above here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F of switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

S&F of Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable complete all as specified and as directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F deluxe fan electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts withpre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cable from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia , MS clamp, nut, bolt and washers including necessary taking down the old one complete all as specified and as directed.

S&F of Bulk head luminaries suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaries efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaries efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nose of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 4 Sqmm standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspend ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including necessary taking down the old one complete all as specified and as directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 6 Sqmm standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspend ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including necessary taking down the old one complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non-metallic conduit with and including taking down unserviceable sub main taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. Notes: Two runs of submain wiring cable alongwith one run of earth wire with and including PVC conduit pipe shall be measured as one unit length.

All as per item Ser No 97 above but using two runs 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/isolators complete with and including taking down old unserviceable one all as specified and directed including taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F in repair MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 Amps, 240 Volts, C Series current carrying capacity 10 kA, including necessary connection and taking down old one complete all as specified and as directed.

SG ENTERPRISE

M/S MOHAN KUMAR BANSAL

SINGH & CO

SHRI PRADEEP PARIK