Construction of Cold Storage Godown and Cold Storage Facility at ARS Yelamanchili

Construction of Open Stage at College of Community Science, Lam, Guntur.

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with coarse sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete corresponding to M7.5 Grade 1:4:8 as per IS 456 equivalent to 1:4:8 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 40mm Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level, curing concrete etc., and complete for finished item of work. (APSS No. 402)

Footings: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Plinth Beam: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Rat proof Projection 100 mm thick: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Flooring Concrete: VRCC M- 20 Nominal mix ( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) (using 400kgs of cement) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span Hire Charges For Centering & Scaffolding including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Hire Charges For Centering & Scaffolding but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Columns: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Lintel beam at 2.10 m level: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Sunshades: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Roof beams: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Roof slab 125 mm thick: VRCC M-20 Nominal mix (Using 400kgs of cement)( 1:1.5:3) (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for COLUMNS AND LINTELS for Nominal Mix: M 20

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

VDF (Vacuum Dewatered concrete Flooring) of 75 mm thick laid in panels of size 4m x6m or as per (internal floor area) M20 grade design mix for using 6mm to 20mm size SS5 graded machine crushed hard blasted granite metal including cost and conveyance of all materials like cement, fine, coarse aggregate etc., to site and excluding cost of seigniorage charges, machine mixing all centering charges, laying concrete, vibratng lift charge, curing including cost of cutting grooves by saw and filling with polysuplhide solution etc., as directed by the department (including labour charges for finishing CC flooring with vaccum dewatering process as per standard specificaton as directed by the department, overheads and contractor profit etc., complete for finished item of work.

Plain Cement Concrete corresponding to M15 Grade as per IS 456 equivalent to 1:2:4 (cement: fine aggregate: Coarse aggregate) proportion nominal mix for foundations and under flooring bed using 20mm Hard, machine crushed granite from approved quarry using concrete mixer 10/7 cft (0.2/0.8cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level, curing concrete etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) - Belt concrete

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-2008) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc.,and overheads & contractors profit complete for finished item of work. (APSS No.126)

Refilling with useful available excavated earth (excluding rock) with a lead of 50 min trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS NO.309&310)

Filling with carted Gravel for foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc., complete including cost and conveyance of Crusher dust for finished item of work.

Basement: Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Super structure: Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Super structure: Fly ash Block Masonry work in CM(1:6) prop (Cement: Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer in charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904)

Basement: Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Super structure: Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Ornamental ceiling plastering 12mm thick single coat in CM (1:3) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc., overheads & contractors profit complete for finished item of work as per special spn: 1108

Providing and fixing RCC Jalies 50mm thick including all labour charges for fixing etc., complete for finished item of work.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new walls with two coats of acrylic emulsion paint of approved brand & shade over a coat of water based cement primer of interior grade I making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For internals walls.

Painting to new walls with two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) less than 50 grams/litre for exterior walls of approved brand & shade over a coat of water based cement primer of EXTERIOR gradell making total 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, with neat finishing including cost and conveyance of all materials to site and all operational, incidental, labour charges etc., complete for finished item of work. For Externals walls.

Providing and fixing factory made solid Wood Polymer Composite (WPC)-both side sunglass 1mm thick laminated single sutter Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame and providing 6Nos of 'Z' hold fast, 2 Nos of 12" Aluminium aldrop, 4 Nos MS powder coated 6" hinges, 1 nos of Aluminium Tower bolt 6", 2 Nos of 6" Aluminium handles, Aluminium door Stopper,rubber,stop bushes and all labour charges and putup, fevicol gum, nails, complete for finished item of work as directed by the dept. Size of the door : (1.00 x 2.10 m size) = 2.1 Sqm

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension.

Supply & application White washing three coats with white cement paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials for:-White wash - White washing 3 coats with white cement

Supply of PUF panel 80 mm thick with skin: PPGI/PPGI (Pre-painted Galavnised Iron) Sheet both sides of thickness 0.50 mm with Micro-ribbed, sheet color-RAL 9002 and panel joint as CamlockJoint and Infill material with PUF density of 40 kg/m3 including transportation charges etc complete for finished item of work.

Supply of floor panel - PUF slab 80 mm thick with skin: Craft paper on both sides, Infill material with PUF density of 40 kg/m3 etc., complete for finished item of work.

Supply and fixing of Vapour barrier polyethylene sheet of 200 micron single layer including placing and installation etc complete (including over lap of 100 mm at the joints)

Providing Kadapa slab 40 mm thick and size not less than 0.457 M x 0.457 M and fixing with CM 1:3 including all incidental, operational, labour charges etc., complete for finished item of work.

VDF (Vacuum dewatered concrete flooring) of 75 mm thick laid in panels of size 4m x6m or as per (internal floor area) M20 grade Nominal mix for using 6mm to 20mm size SS5 graded machine crushed hard blasted granite metal including cost and conveyance of all materials like cement, fine, coarse aggregate etc., to site and excluding cost of seigniorage charges, machine mixing all centering charges, laying concrete, vibratng lift charge, curing including cost of cutting grooves by saw and filling with polysuplhide solution etc., as directed by the department (including labour charges for finishing CC flooring with vaccum dewatering process as per standard specificaton as directed by the department, etc., complete for finished item of work.

Providing Thermo Mechanically Treated (TMT) Bars for (Fe 500/ tmt grade as per IS 1786-1979) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work.

Supply and application of epoxy flooring of light green or light blue colour seamless joint free finish with 3mm thickness and antislip and water washable chemical resistance durable and non particle shedding with attractive finishing complete for finished item of work.

Supply and application of epoxy coving 50mm X 50mm wide at the corner of the walls complete for fnished item of work.

Providing PPGI inside and outside Flashings, REVITS, with silicon sealant and other accessories etc., complete for finished item of work.

Installation charges for PUF panels etc., complete for finished item of work.

Supply and Fixing of swing door of size 900 mm X 1800 mm X 80 mm (SKIN: PPGI/PPGI) (Pre-painted Galavnised Iron) Outer/ inner with all accessories such as door hinges, door closer and lock handel, Infill Material with PUF Density of 40+/-2 Kg/m3, etc., complete for finished item of work.

Supply and fixing of light fittings, pressure relief valves, strip curtains etc., complete for finished item of work.

Supply, installation & Commissioning of Air cooled condincing unit with Emerson reciprocating compressure CR 30, Condenser fan favelle, Air cooled condenser, HP/LP Service valve (Liquid and section), Slight glass 4.0 K.W 4(4 Kw x 2 Sets) including Dehumidification Inbuilt arrangement. (Preferred Make for IDU: Star Cooler, Preferred Make for CDU: Blue Star / Carrier, Compressor Make: Emerson /Equivalent, Compressor Type: Hermetic Scroll)

Supply, installation & Commissioning of blue cold evaparator with reheater coil (8kw) 300 mm X 2 fans, SS casing etc., Complete for finished item of work.

Supply, installation & Commissioning of control panel with RH control, Microprocessor based Temperature Display with Indicator, controller- Subzero, MCR Siemens, Contractor -Siemens, Single Phase preventer etc., Complete for finished item of work.

Providing interconnecting piping, wiring between CDU and IDU, expansion valve, refrigerant, insulation, CDU stands etc., Complete for finished item of work.

Machinery installation charges

Supply of Air curtain cost and conveyance of all materials and labour charges etc complete for finished item of work.