REPAIR/ MAINTENANCE / REPLACEMENT OF SPARE OF VT PUMPS, CENTRIFUGAL PUMPS, AND ALLIED WORKS IN EAST AREA UNDER GE DEHU ROAD

Amount

Disconnections suction and discharge line connection,Diconnection coupling motor of centrifugal pump of discharge capacity 55 LPS with head 122 mtr, motor capacity150 HP . Lifting and removing pump form its existing foundation. Dismantling the pump carefully checking, segregating serviceable,repairable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like shaft, key,Impellior,bearing upper casing etc) including replacement of unserviceable parts as required (The same will be measured and paid separately in respectable items mention bellow). Reassembling the pump including painting with two coats of synthetic enamel paint after necessary surface preparation , marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed . Pump Make=Kirloskar.Model No DSM 150/46. Note:(i) Spare parts for repair/replace will measured in respective items as per site required

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Coupling Key Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Impeller SSuitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Key for Sleeve Nut Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bolt for upper and lower half casing sSuitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor DSM pump .Make Kirloskar.

Supply Draing plug for casing suitablefor 15 HP pump . Suitable for pump set Model no DSM 150/46

Supply Paper packing between lower and upper casing Key Suitable for pump set Model no DSM 150/46

Supply O ring for shast sleev Suitable for pump set suitable for Model no DSM 150/46 ,Kirloskar

Supply Wear Ring suitable for Pump set Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shoulder Ring in CI Suitable for pump set Model no DSM 150/46 150 HP

Supply Interstage Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Lantern Ring Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE ball bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply DE Bearing Cover Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cartridge for bearing, DE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply NDE Bearing Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cartridge for bearing, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing cover, NDE Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing Cap Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Bearing nut,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Shaft sleeve, DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply stuffing box bush,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Hex screw for bearing cover,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Cylindrical pin,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Round Lock nut ,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland Packing,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Vent Valve,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Flexible ST Hose Pipe,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no DSM 150/46 ,Kirloskar

SupplyCooling PVC flexible of Suitable for pump set Model no DSM 150/46 ,Kirloskar

All As Above item No-01 above but centrifugal pump of discharge capacity 46 LPS with head 122 mtr, motor capacity120 HP Pump Make=Kirloskar.Model No RKB-100/23E35.

Repair the Impeller 1st stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.

Repair the Impeller 2nd stage with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no RKB-100/23E35Make-Kirloskar.

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no- RKB-100/23E35Make-Kirloskar.

Supply Coupling Key Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Impeller SSuitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Key for Sleeve Nut Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bolt for upper and lower half casing Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Taper pin with washers and nuts for lower and upper half casingCoupling Key suitablefor Model no- RKB-100/23E35,Make-Kirloskar.

Supply Draing plug for casing suitablefor 15 HP pump .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Paper packing between lower and upper casing Key Suitable for pump setModel no- RKB-100/23E35,Make-Kirloskar.

Supply O ring for shast sleev Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Wear Ring suitable for Pump set Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shoulder Ring in CI Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Interstage Ring Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Lantern Ring Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply DE ball bearing Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply DE Bearing Cover Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cartridge for bearing, DE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply NDE Bearing Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cartridge for bearing, NDE Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing cover, NDE Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing Cap Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Bearing nut,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Shaft sleeve, DE/NDE,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply stuffing box bush,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Water Deflector DE/NDE,Suitable for pump set Model no DSM 150/46 ,Kirloskar

Supply Air vent,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Hex screw for bearing cover,Suitable for pump set.Model no- RKB-100/23E35,Make-Kirloskar.

Supply Cylindrical pin,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Round Lock nut ,Suitable for pump set .Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland Packing,Suitable for pump set. Model no- RKB-100/23E35,Make-Kirloskar.

Supply Vent Valve,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Flexible ST Hose Pipe,Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

Supply Gland stuffing box suitable for nut and bolts Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

SupplyCooling PVC flexible of Suitable for pump set Model no- RKB-100/23E35,Make-Kirloskar.

All As Above item No-01 but Centrifugal Pump of capacity 130 LPS with Head 105 Mtr.with 75 HP motir Make : GRUNDFOS

Kit Chamber stack CRN155-4A,suitable for 75 HP centrifugal Pump,Make : Grand Force.

Mechanical Seal.uitable for 75 HP centrifugal Pump,Make : Grand Force.

Bulk Impeller 99262569,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Shaft 99196563,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit wear part,uitable for 75 HP centrifugal Pump,Make : Grand Force.

Kit Bearing,uitable for 75 HP centrifugal Pump,Make : Grand Force.

AIR &AF Charges,uitable for 75 HP centrifugal Pump,Make : Grand Force.

All As Above item No-01 but Centrifugal Pump discharge 34 LPS at 75 Mtr Head for 60 HP Model No DSM/80/36 : Kirloskar

Repair the Impeller with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36,Kirloskar

Repair the Pump shaft with metaling, grinding,polishing,balancing with true shape Suitable for pump set Model no DSM/80/36 ,Kirloskar

Supply Wear Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shoulder Ring in CI suitable for PUMP set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Interstage Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Lantern Ring suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland suitable for Pump set,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply DE Bearing s,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply NDE Bearing ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Deep Groove Ball bearing suitable for 60 HP,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply ANG Contact Ball bearing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Bearing Cover,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cover NDE,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Impeller,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Coupling,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Key for Sleeve Nut,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Shaft Sleeve Nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Round Lock nut ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Gland Packing,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Vent Valve,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Set of O Ring ,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Flexible ST Hose Pipe,,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Ms stud and including replacement of CI gland ,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply stuffing box suitable for nut and bolts,suitable for Model No DSM/80/36,Make: Kirloskar.

Supply Cooling PVC flexible of ,suitable for Model No DSM/80/36,Make: Kirloskar.

All As Above item No-01 but Centrifugal Pump set discharge 34 LPS at head 75 Mtr,60 HP Model No K1225 Make : Kirloskar

Supply Wear Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Shoulder Ring in CI suitable for PUMP set,suitable for Model No K1225 Make : Kirloskar

Supply Interstage Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Lantern Ring suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply Gland suitable for Pump set,suitable for Model No K1225 Make : Kirloskar

Supply DE Bearing suitable for Model No K1225 Make : Kirloskar

Supply NDE Bearing suitable for Model No K1225 Make : Kirloskar

Supply Deep Groove Ball bearing suitable for Model No K1225 Make : Kirloskar

Supply ANG Contact Ball bearing,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover,suitable for Model No K1225 Make : Kirloskar

Supply Bearing Cover NDE,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve suitable for Model No K1225 Make : Kirloskar

Supply Key for Impeller,suitable for Model No K1225 Make : Kirloskar

Supply Key for Sleeve Nut,suitable for Model No K1225 Make : Kirloskar

Supply Shaft Sleeve Nut ,suitable for Model No K1225 Make : Kirloskar

Supply Round Lock nut,suitable for Model No K1225 Make : Kirloskar

Supply Gland Packing,suitable for Model No K1225 Make : Kirloskar

Supply Vent Valve,suitable for Model No K1225 Make : Kirloskar

Supply Set of O Ring ,suitable for Model No K1225 Make : Kirloskar

Supply Gland stuffing box suitable for nut and bolts suitable for Model No K1225 Make : Kirloskar

All As Above item No-01 but Centrifugal Pump set discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

SupplyWear Ring suitable for Pump set suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Shoulder Ring in CI suitable for PUMP setsuitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Interstage Ring suitable for Pump set suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Lantern Ring suitable for Pump set suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Gland suitable for Pump set suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Liquid deflector suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply DE Bearing suitable for Capacity30 HP,suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply NDE Bearing suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Deep Groove Ball bearing suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply ANG Contact Ball bearing,suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Shaft Sleeve suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Key for Impeller suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Key for Coupling suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Key for Sleeve Nut suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Shaft Sleeve Nut suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Round Lock nut suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Gland Packing suitable for discharge 45 LPS 60 Mtr head , 30 HP.Make Kirloskar.

Supply Vent Valve suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Set of O Ring suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Flexible ST Hose Pipe suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

Supply Cooling PVC flexible of suitable for discharge 45 LPS 60 Mtr head 30 HP.Make Kirloskar.

All As Above item No-01 but Centrifugal Pump set 15 HP Model No KDS1537TT Make : Kirloskar OR Equivalent

Pump shaft Suitable for pump set 15 HP

DE/NDE Bearing No 6306 suitable for model no KDS 1537TT of capacity 15 HP

Shaft bush for 15 HP Pump including removal from the pumps

Shaft coupling flexible type KC 276 FOR 15 HP Cappacity in repair and removal from pumps

Star Nuts for 15 HP Centrifugal pump model no KDS 1537TT

Impeller for 15 HP Centrifugal pump model no KDS 1537TT

Air Fan for 15 HP Motor

Impeller wear ring

Bearing housing.

All As Above item No-01 but Centrifugal Pump set 12.5 HP Make : Kirloskar or equilent

Pump shaft Suitable for pump set 12.5 HP Make : Kirloskar or equilent

DE/NDE Bearing of capacity 12.5 HP Make : Kirloskar or equilent

Shaft bush for 12.5 HP Make : Kirloskar or equilent including removal from the pumps

Shaft coupling flexible type 12.5 HP Make : Kirloskar or equilent in repair and removal from pumps

Star Nuts for 12.5 HP Make : Kirloskar or equilent Centrifugal pump

Impeller for 12.5 HP Make : Kirloskar or equilent Centrifugal pump

Mechanical Shaft seal for 12.5 HP Make : Kirloskar or equilent Centrifugal pump

All As Above item No-01 but Centrifugal Pump set discharge 26LPS 31 Mtr 10 HP Make : Kirloskar

Pump shaft Suitable for pump set 10 HP

DE/NDE Bearing of capacity 10 HP

Shaft bush for 10 HP Pump including removal from the pumps

Shaft coupling flexible type 10 HP Cappacity in repair and removal from pumps

Star Nuts for 10 HP Centrifugal pump

Impeller for 10 HP Centrifugal pump

Mechanical Shaft seal for 10 HP Centrifugal pump model no KDS 1537TT

Disconnection the electric and pump connection and transportation to work shop for repair and back,taking out burnt winding coils from stator body cleaning of slots with soft wire brush and rewinding by using super enameled copper wire of existing size & gauge, heat and varnishing complete and M&L winding with super enamal copper wire of existing gauge including greasing, varnishing and alike testing and painting with two cote of synthetic eanamel paint,complete for under mentioned electric motors

All as item no 9 here in before but Squirrel cage electric motor of capacity 150 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity120 HP 3 phase 415 Volt AC supply. ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 60 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 30 HP 3 phase 415 Volt AC supply. (make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 15 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 10 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 9 here in before but Squirrel cage electric motor of capacity 5 HP/3 HP 3 phase 415 Volt AC supply ( make : kirlosker )

All as item no 9 here in before but Open well Submersible motor of capacity 15 HP

All as item no 9 here in before but Open well Submersible motor of capacity 10 HP

Taking down the Slip ring assy complete with studs made out of copper suitable for 150 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Slip ring assy complete with studs made out of copper suitable for 120 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Slip ring assy complete with studs made out of copper suitable for 60 HP Capacity Motor and supply and fixing the same all as directed.

Taking down the Carbon bush holder made of bronze suitable for 150 HP Capacity Motor and supply and fixing the same all as directed

Carbon brushes holder made of bronze as per existing sizes per sample suitable for 120 HP Capacity Motor

Carbon brushes holder made of bronze as per existing sizes per sample suitable for 60 HP Capacity Motor

Taking down the unserviceable Fan Blade upto 20 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 30 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 60 HP Motor and supply fixing the same.

Taking down the unserviceable Fan Blade upto 100-150 HP Motor and supply fixing the same.

Taking up the unserviceable cable of any type,and supply , laying and connecting with copper conductor including copper lugs in repair and PVC flexible pipes of suitable sizes of following capacities from panel board to starter to motor for connection.Polycab PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS: 694:2010 .

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to 35 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .25 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .16 sqmm three core Make : Polycab,Finolex,Havells

PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to .10 sqmm three core Make : Polycab,Finolex,Havells

Taking down the unserviceable MCCB from the existing panel and supply fixing the following type along with connection,providing Lug complet all as directed.

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(36 to45 kA rms) MCCB 400 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 250 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 200 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 160 Amps TPN ,Make: Havells,Legrand

Supply and Fix Moulded Case Circuit Breakers (AC 415 V)(Conforms to IS/IEC:60947-2),Adjustable Thermal & Fixed Magnetic,Rated Ultimate Shortcircuit Breaking Capacity-Ics=100% Icu at 415 .(26kA rms) MCCB 100 Amps TPN ,Make: Havells,Legrand

Taking down the unserviceable Starter from the existing panel and supply fixing the following type along with connection,providing Lug complet all as directed.

Supply and Fixing ML 1.5 FASD For 15 HP Squirrel cage Induction motor Make L&T Cat no SS91855 C&S, Havells or equivalent

Supply and Fixing ML2 FASD For 30 HP Squirrel cageInduction motor Make L&TCat no SS90705 C&S, Havells or equivalent

Supply and Fixing ML4 FASD For 60 HP Squirrel cageInduction motor Make L&TCat no SS90913, C&S, Havells or equivalent

Supply and Fixing ML6 FASD For125 HP to 150 HP Squirrel cageInduction motor Make L&TCat no SS90923, C&S, Havells or equivalent

Supply and Fixing MU-G 15 Fully Automatic Star-Delta Starter for 15/10 HP squrrel cage induction motor Make L&TCat no CS94901, C&S, Havells or equivalent

Supply and Fixing MN 16 DOL Starter for 3/ 5 HP Motor L&TCat no SS94351, C&S, Havells or equivalent

Supply and Fixing ML 1.5 contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML2 Contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML 3/4 Contactor Make: L & T/C&S/Havells or equivalent

Supply and Fixing ML10 ContactorMake: L & T/C&S/Havells or equivalent

S&F in repair Single phase preventor as reqd on site fpr protection of starter complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Disconnecting /dismantling /taking out the defective burnt out VT pump set (Moter/Pump) from jack well and transporting to shop including loading/unloading etc complete and reffixing again after necessary repair work of capacity 30 HP Vertical motor. The repair includes followings a) Dismantling/taking out strip opening /inspection complete of the bowl assembly, column pipe assembly, discharge head assembly etc and cleaing/ servicing overhauling all the servicable spare parts and M &L for painting to exposed surfaces of the column pipe assembly, bowl assembly and discharge head assembly etc with two coats of approved quality anticorrosive water resistant type black paint all as directed including labours for replacement of worn out / unservicable parts as required and directed by Engr-in-charge. b) Reassembling the complete pump set and re-erection and re-installation at its original position as directed c) Testing and commissioning complete all as directed by Engr-in-Charge. Note:1) The rate quoted by the tenderer includes all cost of necessary nut bots washers and alike if not included in Sch A 2) All new parts required will be measured and paid separately as supply only items. 3) The rate quoted by the tenderer also includes cost for taking out pump from the well 20m depth from GL and again lowering the same in its original level and alignment complete. 4)The size of wiring to be incorporated in the work shall be as per existing one hence contractor is requested to visit the site and to get acquanted with site conditions complete. 5)T&P , Transport etc incl in quated rate .

Suction case bearing for 30 HP VT Pump set of Capacity 30 HP.Make:Joyti

Impeller seal ring of Capacity 30 HP.Make:Joyti

Bowl Bearing of Capacity 30 HP.Make:Joyti

Bowl studs (SS) of Capacity 30 HP.Make:Joyti

Line shaft coupling (SS) of Capacity 30 HP.Make:Joyti

Bearing holder assembly of Capacity 30 HP.Make:Joyti

Line shaft Bearing (Throdan type) of Capacity 30 HP.Make:Joyti

Column studs /nut bolts (50 Nos) of Capacity 30 HP.Make:Joyti

Stuffing box bush of Capacity 30 HP.Make:Joyti

Latern Ring of Capacity 30 HP.Make:Joyti

Water deflector of Capacity 30 HP.Make:Joyti

Head shaft coupling of Capacity 30 HP.Make:Joyti

Head shaft coupling of Capacity 30 HP.Make:Joyti

Column pipe 150 mm of Capacity 30 HP.Make:Joyti

Impeller adjusting nut with screw of Capacity 30 HP.Make:Joyti

Impeller made out of MS with impeller key complete all as directed

Strainer Assembly of Capacity 30 HP.Make:Joyti

Bowl of Capacity 30 HP.Make:Joyti

Impeller shaft of Capacity 30 HP.Make:Joyti

Impeller collect assemly of Capacity 30 HP.Make:Joyti

Line shaft up to 1.5 mtr and replacement of the Line shaft coupling complete all as directed

Supply only NDE Bearing No 6307/C3 suitable for 30 HP Make SKF OR equivalent

S&F in repair electric connection box of ebonite materials with Insulators, lugs , protection cover suitable for 30 HP.

M&L for MS work including transportation and using angle iron 50x50 mm 5 mm thick including cutting, welding;Painting and fixing on wall or roof or floor using anchor fastner nut and bolt etc of suitable size as directed by Engr-in-Charge.

Repairs/rewinding of electric motors of the following . a) Disconnecting /dismantling /taking out the defective burnt out electric motor and transporting to shop including loding/unloading etc complete. b) Strip inspection, the motor, removing & taking out the burnt out windings of stator complete and keeping aside for further disposal all as directed. c) M& L rewinding the stator windings complete by using appropriate gauge super enamelled copper conductor including M& L for "F" class insulation, sleeving, varnishing, baking/overdrying , machining as required with brazzing filling etc complete d) cleaning / de carburising all the servicable spare parts of the motor replacing worn out/unservicable spare parts as required and as directed by Engr-in-Charge( The required spare shall be measured & paid separately under appropriate item of sch "A" as supply only ) e) Re-assembling the motor after repairs/rewinding and transporting to pump house including re-erection/ re-installation at its original position and necessary electrical connections all as directed complete. f) Testing and commissioning complete.

30 HP capacity , M/S Jyoti(Kirloskar) make, squirrel cage induction motor suitable for VT pump set

Taking out unserviceable air compressor twin lobe blower type 15 HP 1440 RPM, 3 phase 440Volt capacity 300 Cu ft/min from Pump House and carring out overhauling of air compressor with replacement of following spare parts , greasing, varnishing and alike testing complete of capacity

Bearing suitable 15 HP Blower.

Oil Seal uitable 15 HP Blower.

Oil Packing uitable 15 HP Blower.

Gear Hub uitable 15 HP Blower.

Gear Set uitable 15 HP Blower.

Rotar Set uitable 15 HP Blower.

S&F in replacement Change Over to the following type including removing from the panel.

Change Over open execution type 315 Amp 415 volts complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Change Over open execution type 200 Amp 415 volts complete all as specified and directed Make: L & T/C&S/Havells or equivalent

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at KINHAI pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)150 HP-01 No. (b) 120 HP-01 No (c)100 HP=01 No (d) 75 HP-01 No. (e) VT Pump 30 HP-03 Nos (f) 167 BHP diesel Engine Pump Set-01No

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at MIDC pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)60 HP-03 No.

Maintanence/servicing of different capacity and make electricly operated Centrifugal Pump at MAP pump house ,including renoval/replacement of defective parts, servicing and checking . Service representative minimum for one visit in every Month and 100% serviceable at all time. The scope of work maintioned in below. (i) Replenish the grease.(ii) Check the stuffing box packing. (iii) Check the alignment of the pumpset. (iv) Calibrate the measuring instruments.(v)Pressure gauge reading. (vi)(5.1.2 Bearing temperature.(vii) Leakage through stuffing box. (viii) Noise and vibration. (ix) Voltage and current. (x) Check the sealing and cooling connections for leakage (xi) Starter connection. Note:(i) Spare for routine maintanence like Lubricant,Coolent,Packing gland,rupper insertation,Cotten west,Nut's and bolt for coupling/cashing required for maintinaince are including the cost of work. (ii)spare required for repair will be measeured and paid seperatly in respective items. (iii)The Pump and Motor capacity under the scope of work is as under(a)30 HP-02 No.

Shri Sai Electricals

Om Sai Enterprises