Kerala

Active

Works

Civil Works - Buildings

Pro no 1861/2026-27 Construction of Ladies wellness centre over newly constructing Anganwadi building in Poonthura ward Thiruvananthapuram Corporation

Local Self Government Department

TVPM CORPORATION FORT ZONAL | Thiruvananthapuram, Kerala

Amount: ₹10.2 LCloses: 24 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Closes24 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹10.2 L

EMD Value

₹25,400

Closing Date

24 Oct 2026, 5:00 pm5d left

Tender Inviting Organisation

Name

Assistant Executive Engineer (Fort)

Address

OFFICE OF ASSISTANT EXECUTIVE ENGINEER , FORT ZONAL ,TVPM CORPORATION

Work Description

Pro no 1861/2026-27 Construction of Ladies wellness centre over newly constructing Anganwadi building in Poonthura ward Thiruvananthapuram Corporation

Tender Information

Tender ID

2026_LSGD_879622_5

Reference Number

LSGD/CELSGD/AEE4/FORT26-27(7)

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

TVPM CORPORATION FORT ZONAL

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredSCANED COPY OF FOT (.pdf)

RequiredSCANED COPY OF PRELIMINARY AGREMENT (.pdf)

RequiredSCANED COPY OF FOT AFFIDAVIT (.pdf)

RequiredSCANED COPY OF FOT EPAY (.pdf)

RequiredSCANED COPY OF FOT IPACT (.pdf)

RequiredSCANED COPY OF SBD (.pdf)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹25,400

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 Oct 2026

Published

15 Oct 2026

Bid Opening

26 Oct 2026

Download Starts

15 Oct 2026

Download Ends

24 Oct 2026

Submission Starts

15 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (36 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1RENNOVATION
1.001	50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete	7.27	cum	-	-
1.002	13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).	116.52	sqm	-	-
1.003	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	116.52	sqm	-	-
1.004	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	116.52	sqm	-	-
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	680.25	kg	-	-
1.006	OD68886/2026-2027:Providing and fixing Aluminium traffold sheet sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	80	sqm	-	-
1.007	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	245.71	sqm	-	-
1.008	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	27.5	metre	-	-
1.009	OD69022/2026-2027:Supplying and fixing 110 mm dia upvc rain water gutter (square pathy) including fitting with 32 mm x 5mm MS flat supporters at 1m intervel complete	36	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Work Item Documents

BOQ_1496012.xls

BOQ • 0.33 MB

AFFIDAVIT1861.pdf

Tender Documents • 0.23 MB

epayment.pdf

Tender Documents • 0.24 MB

1861FOT.pdf

Tender Documents • 0.25 MB

integrity.pdf

Tender Documents • 0.24 MB

SBD.pdf

Tender Documents • 2.34 MB

1861PA.pdf

Tender Documents • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1RENNOVATION
1.001	50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete	7.27	cum	-	-
1.002	13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).	116.52	sqm	-	-
1.003	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	116.52	sqm	-	-
1.004	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	116.52	sqm	-	-
1.005	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	680.25	kg	-	-
1.006	OD68886/2026-2027:Providing and fixing Aluminium traffold sheet sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	80	sqm	-	-
1.007	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	245.71	sqm	-	-
1.008	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	27.5	metre	-	-
1.009	OD69022/2026-2027:Supplying and fixing 110 mm dia upvc rain water gutter (square pathy) including fitting with 32 mm x 5mm MS flat supporters at 1m intervel complete	36	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1RENNOVATION

1.001

50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

7.27

cum

1.002

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

116.52

sqm

1.003

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

116.52

sqm

1.004

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

116.52

sqm

1.005

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

680.25

1.006

OD68886/2026-2027:Providing and fixing Aluminium traffold sheet sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

1.007

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

245.71

sqm

1.008

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

27.5

metre

1.009

OD69022/2026-2027:Supplying and fixing 110 mm dia upvc rain water gutter (square pathy) including fitting with 32 mm x 5mm MS flat supporters at 1m intervel complete

metre