WBPWD/EE/N24/EL/e-NIQ- 234/24-25

Amount

SUB HEAD 1 -- DISTRIBUTION WIRING Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (RR/Polycab/Finolex) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ 1(a)/(ii)/E-14 ]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC [ 1(a)/(iv)/E-14 ]

SUB-HEAD 2-- PLUGS & SOCKETS Supplying & Fixing CRC sheet metal (16 SWG) JB-cum Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall as per GS. -- 240 mm x 200 mm x 65 mm [ 10(d)/E-4 ]

Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick as per GS. [ 17(b)/E-6 ]

SUB HEAD 3 -- BDB,PDB,VTPN ETC Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 240 V, 32 A DP Main Switch with fuse on L&N ( Make - Havells/ L&T/ ABB ) [ 1(a)/D-1 ]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 63 A TPN SFU on angle iron frame ( Make - Havells/ L&T/ ABB ) [ 4(a )/D-3 ]

SUB HEAD 4 -- SUPPLY OF CABLES Supply & Delivery of 2 Core PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor Cables for Working Voltage up to 1100 Volts of following sizes. [ Make - Polycab/Gloster/RR ] 2 core 10 Sq mm. cable. [ NS ]

SUB HEAD 5 -- LAYING OF CABLES Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as per GS. -- [ 2(a)/F-1 ] [ For 2 core 10 Sq mm. ]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damagesas per GS. -- From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [ 5(i)/F-3 ] [ For 2 core 10 Sq mm. ]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre as per GS. -- [ 1(a)/F-2 ] [ For 2 core 10 Sq mm. ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring as per GS. -- 2 core 10 Sq mm. cable gland. [ 7(a)/F-4 ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) as per GS.2 core 10 Sq mm. cable [ 8(b)/(iii)/F-5 ]

SUB HEAD 6 -- COMPOUND LIGHTS AND FEEDER PILLAR Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire as per GS. [ 18/ C-3 ]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. [ 20(a)/C-3 ]

Fixing only LED Street light type fittings incl. making holes/providing clamping arrangement & necy. GI reducer as required on the existing arm brackets of the 9 mtr. height pole/Mini Pole Structure as per the direction of EIC. [ NS ]

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary With 250x250x100mm 16 SWG GI Loop Box [ 12(b)/I-1 ]

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting. ( 250 x 250 x 100mm ) [ 16(b)/I-2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (RR/Polycab/Finolex) of the following sizes in the prelaid polythene pipe - 2 x 36/0.3 (2.5 Sq mm.) + 1 x 22/0.3 (1.5 Sq mm.) as ECC incl. S & F 13 mm. dia. heavy gauge polythene pipe from loop box of Pole to fittings. [ 1(s)/E-9 & 50/K-1 ]

Supplying & fixing of 240 V time sensor switch consisting of the following accessories: A) 240 V, 40 A, DP MCB isolator of breaking capacity 10 KA & C characteristics - 01 no. (Make: L & T), B) 24 hour digital timer switch (Make: L & T) - 01 no., C) 240 V 25A DP power contactor (Make: L & T) - 01 no., D) Auto manual toggle switch - 01 no., E) 240 V, 20 A, SP MCB of breaking capacity 10 KA & C characteristics (Make: L & T) - 01 no., F) LED indicator lamp - 01 no. red & 01 no. green in 2+10 way SPN MCB DB (Make: L & T) incl. lock & key arrangement concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of Cu wire & provision for earthing attachment.

Supply & Delivery of 9 mtr. Swagged type Single Steel tubular Pole ( Make - Jindal/ Bansal/Uthkarsh ) from Store to work-site as per specification type 410- SP- 28 as overall length 9.0 mtr. and Planting Depth - 1.50 mtr, Approx weight of Pole -- 113 KG. and having dimension as per details given below : outside Dia & Thickness of Section as Bottom section ( 139.7 x 4.50 ) mm., Middle Section - ( 114.3 x 3.65 ) mm, Top section ( 88.9 x 3.25 ) mm. and Length of Section -- Bottom - 5.00 mtr; Middle - 2.00 mtr; Top - 2.00 mtr. with fixing the MS base plate incl. necy. arrangements. as per direction of E.I.C. [ NS ]

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc.as per GS. -- Upto 9.0 mtr; Size - 06 x 0.6 x 1.70 mtrs. [ 1(a)/H-1 ]

Supply & Fixing of detachable type Single arm bracket made of 100 mm & 40 mm dia GI pipe ( Make - Jindal/ Bansal/Uthkarsh ), 1.5 mtr. Long with necy. arrangements suitable for fixing at the top of the pole incl painting with two coats of Aluminium paint over one coat of RO primer. [ NS ]

Supply & Fixing of detachable type Double arm bracket made of 100 mm & 40 mm dia GI pipe ( Make - Jindal/ Bansal/Uthkarsh ), 1.5 mtr. Long with necy. arrangements suitable for fixing at the top of the pole incl painting with two coats of Aluminium paint over one coat of RO primer. [ NS ]

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. -- Upto 9.0 mtr. long pole. 1st coat of aluminium paint over 1 coat of RO priming. [ 4(a)/(i)/H-2 ]

2nd coat of aluminium paint over 1st coat. [ 4(a)/(ii)/H-2 ]

Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below. Size -- 50 mm and upto 75 mm. [ 6(b)/H-2 ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 Sq mm [ 9(i)/ F-5 ]

4 Sq mm [ 9(ii)/ F-5 ]

6 Sq mm [ 9(iii)/ F-5 ]

Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 2750 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips/Crompton/Havells/Wipro) Colour - White

Supply & Delivery of Street light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 13200 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips/Crompton/Havells/Wipro) Colour - White

Supply & Delivery of Flood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 8800 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips/Crompton/Havells/Wipro)

Supply & Delivery of Flood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 16500 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips/Crompton/Havells/Wipro)/ Colour - White

Supply & Delivery of Flood light luminaire (IP 66) with peanut lens and high poer LED to ensure uniform distribution and higher spacing between poles, 10 KV SPD, THD<10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW : 110 lumen/watt and minimum system output 22000 lumen suitable for use with 230 Volt, 50 Hz. ( Make - Phillips/Crompton/Havells/Wipro)

SUB HEAD 7 -- MISCELENEOUS Dismantalling of the existing old electrical wiring from old existing outdoor fittings - fixtures etc. and mending good the damages as required as per direction of EIC. [ NS ]

Supply & Fixing hylum Meter Board on wall of size 2' x 1.5' by MS angle frame ( 50 mm x 50 mm ) incl. provision for fixing the 1 (One) nos. Three phase meter with supply & fixing 250/415 Volt, 3 Nos. 200 Amp Fuse Base and Bridge including 1 Nos. Neutral link incl. painting the wooden board as per direction of E.I.C. [ NS ]

Supply & Laing of Meter Loop connection incl. Supply & fixing 4 x 35 sqmm PVC single core multi stranded copper wire (RR/Polycab/Finolex) through PVC flexible pipe ( 3 meter. of Length of each Phase wire & Neutral wire i.e. 3 x 4 = 12 Mtr. of total length ) from Meter to Cut - Out and Cut - Out to Incoming of Main Switch with proper socketting by Pin/Ring type copper lugs of required sizes as per the direction of EIC. [ NS ]

Additional charges for cutting the RCC Road and mending good the damages as to original finish after laying the cable through the existing GI Pipe protection as per size given below -- 40 mm dia [ NS ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. -- 40 mm dia [ 11(c)/F-6 ]

SUB HEAD 8 -- EARTHING Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [ 1(a)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI - Medium GI Pipe [ 2(a)/ G-1 ]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid G.I. wire -- No. 4 SWG GI wire. [ 5(a)/(i)/G-2 ]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [ 4(b)/G-2 ]

ASCO (BID ID -6218699)

DEBNATH ENGINEERING WORKS (BID ID -6224095)

R D ENTERPRISE (BID ID -6213027)

MONALISA (BID ID -6231719)