Kishanpath yojana (Year 2023-24)

Providing & fixing ordinary kilometer stone of precast C.C.1:2:4 Including Necessary Reinforcement as per IRC type design in CC 1:4:8 including painting & lettering etc.complete

Providing & fixing Hectometer as per IRC type design including painting, lettering etc.complete ( ii ) fixing in CC 1:5:10

Providing & fixing guard stone as per IRC type design including painting, lettering etc.complete ( I ) fixing in Earth

Providing & fixing Indicator stone of approved stone as per IRC type design including white washing etc.complete ( I ) fixing in Earth

Providing and fixing Village sign board as per standerd I.R.C. type design of steel plate incl. painting,lettering etc. complete with fixing in cement concrete 1: 4: 8 with necessary excavation.

Providing and fixing junction board of M.S plates and angles as per standard I.R.C design including fixing in C.C 1:4:8 with necessary excavation, painting figuring and lettering on board etc, complete

Supplying and fixing Road sign Board of M.S. plates angle iron including painting, lettering etc. complete incl. fixing in cement concrete 1: 4: 8 with necessary excavation etc. complete as per I.R.C. type design. [I] Non-Reflective type.

Village name/ Bump Ahed sign: Providing and fixing sign boards made out of 2mm aluminium sheet size 90x60 cms rectangle as per the design of IRC 67 1977 pre treated with phospheting process & acid etching coated with one coat of epoxy primer and two coats of best quality epoxy paint: reflectorised with retro reflective sheeting as per latest MOST specidication: letters and numbers should be as per IRC 30 1968, 3.10m long(2nos) stand post and frame fabricated from suitable size iron angle of 50x50x5 mm painted with best quality epoxy coatings in black and white bends, the details of symbol or inscription/numerals for ezch board shall be as per the instruction of engineer in charge. the fixing at site shall be in 1:2:4 CC block of size 45x45x60 cms for ezch leg incl. excavation curing etc. comp. under the suprvision of engineer in charge A) Engineer Grade

Providing and filling in foundation with ordinary C.C. M-100 mix and Providing necessary vertical pin headers including formwork, vibrating, ramming and curing etc. complete.

Providing and casting in situ ordinarycement concrete M-200 for average 75 mm thick wearing coat laid as directed including tamping ,vibrating, finishing, curing and filling in joints with bitumen complete.

Total…

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad

STEEL CONSUMPTION STATEMENT

Providing and laying in position FE 500D TMT bar reinforcement including cutting, bending, hooking and tying complete as per detailed drawings for the following.(A) Piers (B) Abutments (C) R.C.C. Returns

Total…

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad

ASPHALT CONSUMPTION STATEMENT

Providing and laying 37.50 mm thick Built up spray grout in One layers using black crushed stone aggregate as per gradation and specification including using bitumen for tackcoat at the rate of 2.5 Kg./10 Sqmt. on Surface by mechanical sprayer and bitumen of VG-10 grade mixing at the rate of 19.90 Kg./ M.T.by weight of total mix ( i.e.1.99 % ) including heating and mixing the aggregate and bitumen by continuous batching drum mix plant, transporting the mix and spreading the same by paver finisher and consolidation with vibratory roller including cost of all materials, fuel, labours,tools and plants. using contractor's own drum mix plant and machineries etc. complete.

Providing, laying and rolling of 25 mm thick open graded premix bitumenous carpet with B.T. aggregate as specified and using bitumen VG-10 for tackcoat at the rate of 2.5 Kg./10 Sq.Mt. on BT surface and using bitumen VG-10 for mixing with aggregate at the rate of 3.36 % i.e. 33.60 Kg./ M.T. of total mix including heating and mixing in drum mix plant, spreading the same with paver finisher and consolidation with vibratory roller including necessary fire wood, oil, lubricants, labor charges etc. using contractor's own drum mix plant and equipment, tools etc. completed in accordance with the requirement of specification.

Providing and laying seal coat with B.T. aggregate as specified using aggregate at the rate of 0.18 Cum/ 10 Sq.Mt. and bitumen VG-10 for mixing with aggregate at the rate of 4.5 % i.e. 45.00 Kg./M.T. of total mix including heating and mixing in drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including necessary fire wood, oil, lubricants, labour charges using contractor's own drum mix plant, machineries and equipment, tools etc. complete in accordance with the requirement of specification.

Total…

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad

EMULSION (SS-1) CONSUMPTION STATEMENT

Total…

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad

EMULSION (RS-1) CONSUMPTION STATEMENT

Total…

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad

BILL OF QUANTITIES

Item No.

In Figure

Claring & gurubbing road length including uprooting rank vegetation , grass bushes , shrubs , saplings & trees girth up to 300 mm removal of stumps of trees cut earlier & disposal of unserviceable materials to be used of ouctioned up to a lead of 100 mt.

Earthwork for embankment including breaking clods, dressing with all leads and lifts (excluding watering and consolidation) (D)From borrow Area within 2.00 Lead

Rolling of earthwork in layers with power roller including filling in depressions which occur during the process. (more than 10 ton)

Supplying and stacking of crushed stone aggregates, chippings of hard of stone 40 to 63 mm mm size free of disintegrated pieces of deleterious and organic matter (for W.B.M.) and grading as per I.R.C. code with 10 K.M. Lead including filling the boxes.

Supplying and stacking of Machine crushed stone aggregates, chippings etc.of 6 to 10 mm size of hard stone free of disintegrated pieces, deleterious and organic matter (for WBM) and grading as per I.R.C. code with av. 10 Km. lead..Including filling the

Supplying and stacking of stone dust on road site including filling the measure boxes with average lead 10.00 km

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates

Spreading blindage or road crust filling the gaps in metal and leveling to camber and gradient as directed.(i) STONE DUST

Rolling and consolidation using vibratory road roller 8 - 10 tonne capacity (C) Water bound Macadam (Layer not exceeding 100mm thickness)

Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam as per MORTH specification including premixing the material with water at OMC in mechanical mixer Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver finisher in sub-base/base course on a well prepared sub-base and compacting with vibratory roller to achieve the desired density etc comp.

Providing and laying 37.50 mm thick Built up spray grout in One layers using black crushed stone aggregate as per gradation and specification including using bitumen for tackcoat at the rate of 2.5 Kg./10 Sqmt. on Surface by mechanical sprayer and bitumen of VG-10 grade mixing at the rate of 19.90 Kg./ M.T.by weight of total mix ( i.e.1.99 % ) including heating and mixing the aggregate and bitumen by continuous batching drum mix plant, transporting the mix and spreading the same by paver finisher and consolidation with vibratory roller including cost of all materials, fuel, labours,tools and plants. using contractor's own drum mix plant and machineries etc. complete.

Providing, laying and rolling of 25 mm thick open graded premix bitumenous carpet with B.T. aggregate as specified and using bitumen VG-10 for tackcoat at the rate of 2.5 Kg./10 Sq.Mt. on BT surface and using bitumen VG-10 for mixing with aggregate at the rate of 3.36 % i.e. 33.60 Kg./ M.T. of total mix including heating and mixing in drum mix plant, spreading the same with paver finisher and consolidation with vibratory roller including necessary fire wood, oil, lubricants, labor charges etc. using contractor's own drum mix plant and equipment, tools etc. completed in accordance with the requirement of specification.

Providing and laying seal coat with B.T. aggregate as specified using aggregate at the rate of 0.18 Cum/ 10 Sq.Mt. and bitumen VG-10 for mixing with aggregate at the rate of 4.5 % i.e. 45.00 Kg./M.T. of total mix including heating and mixing in drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including necessary fire wood, oil, lubricants, labour charges using contractor's own drum mix plant, machineries and equipment, tools etc. complete in accordance with the requirement of specification.

Providing & fixing ordinary kilometer stone of precast C.C.1:2:4 Including Necessary Reinforcement as per IRC type design in CC 1:4:8 including painting & lettering etc.complete

Providing & fixing Hectometer as per IRC type design including painting, lettering etc.complete ( ii ) fixing in CC 1:5:10

Providing & fixing guard stone as per IRC type design including painting, lettering etc.complete ( I ) fixing in Earth

Providing & fixing Indicator stone of approved stone as per IRC type design including white washing etc.complete ( I ) fixing in Earth

Providing and fixing Village sign board as per standerd I.R.C. type design of steel plate incl. painting,lettering etc. complete with fixing in cement concrete 1: 4: 8 with necessary excavation.

Providing and fixing junction board of M.S plates and angles as per standard I.R.C design including fixing in C.C 1:4:8 with necessary excavation, painting figuring and lettering on board etc, complete

Supplying and fixing Road sign Board of M.S. plates angle iron including painting, lettering etc. complete incl. fixing in cement concrete 1: 4: 8 with necessary excavation etc. complete as per I.R.C. type design. [I] Non-Reflective type.

Village name/ Bump Ahed sign: Providing and fixing sign boards made out of 2mm aluminium sheet size 90x60 cms rectangle as per the design of IRC 67 1977 pre treated with phospheting process & acid etching coated with one coat of epoxy primer and two coats of best quality epoxy paint: reflectorised with retro reflective sheeting as per latest MOST specidication: letters and numbers should be as per IRC 30 1968, 3.10m long(2nos) stand post and frame fabricated from suitable size iron angle of 50x50x5 mm painted with best quality epoxy coatings in black and white bends, the details of symbol or inscription/numerals for ezch board shall be as per the instruction of engineer in charge. the fixing at site shall be in 1:2:4 CC block of size 45x45x60 cms for ezch leg incl. excavation curing etc. comp. under the suprvision of engineer in charge A) Engineer Grade

Providing and filling in foundation with ordinary C.C. M-100 mix and Providing necessary vertical pin headers including formwork, vibrating, ramming and curing etc. complete.

Providing and laying in position FE 500D TMT bar reinforcement including cutting, bending, hooking and tying complete as per detailed drawings for the following.(A) Piers (B) Abutments (C) R.C.C. Returns

Providing and casting in situ ordinarycement concrete M-200 for average 75 mm thick wearing coat laid as directed including tamping ,vibrating, finishing, curing and filling in joints with bitumen complete.

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (i) RCC work

Total…

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

* Estimated Amount

put to tender

Deduct :…………% Below

In Words ……………………………………

* (Please strike out whichever is not applicable).

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer

Panchayat (R&B) Sub Division

Bhanvad