Providing Development works for the work of Construction of Administrative building for TSP 1st Battalion in Trichy

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

41) Painting 2 coats - New "iron work"

55.2) Supplying and fixing of Flat Back Urinal

Annexure 2.1.1) Supplying and filling the basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.1.1) Plain cement concrete 1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) Plain cement concrete 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand

6.6.1) Brick work in C.M. 1:5 (Foundation and basement) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40MM Thick a. In Foundation & Basement

26.1) Flooring in bed of cement concrete 1:5:10 using 40mm size HBSJ and crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand

43.1) Supplying, Fabricating and placing in position of Mild steel grills / Ribbed Tor steels (without cement slurry wash) reinforcement for all dia of rods

57.2.1) Supplying and fixing of EWC (white) Rimless Bowl for coupled WC superior variety 380x660x850mm with UF soft closing slim seat cover

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

77.5.1) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

84.4) Run of Main 4 wires of 6 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

84.5) Run of Main with 4 wires of 10 Sqmm PVC insulated unsheathed single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

102) Supplying and fixing of 4'18 watts crystal LED tube light

114) Supplying and fixing of Mild steel angle of size 50x50x5mm for cable duct

Borewell arrangements 119) Supplying and delivery of single phase 2 HP open well submersible pumpset Duty 50 lpm x 50m

119.1) Supplying and delivery of clear water vertical wet type single phase 2 HP submersible pumpset suitable for 150mm dia borewell Duty 20 lpm x 150m

120) Labour charges for erection of submersible pumpset in borewell / open well (upto 5 HP)

121) Supplying and delivery of single phase panel board of direct online starter with two level guard and auto start (2 HP)

122) Supplying and fixing of following dia GI, GM, CI and Brass specials a) 50 mm dia GI Bend

b) 32 mm dia GI Union

c) 32 mm dia GI Hex Nipple

d) 32 mm dia GI Elbow

e) 50 mm dia GM Non-Return valve

f) 40 mm dia GM gate valve

g) 40 mm dia GI Elbow

h) 40 mm dia GI Union

i) 40 mm dia GI Coupling

j) 50 mm dia GM gate valve

k) 50 mm dia GI Union

l) 50 mm dia CI foot valve

m) 25 mm dia GM gate valve

n) 32 mm dia Brass valve

o) 32 mm dia Brass Non Return valve

123) Supplying and Delivery of PVC insulated and sheathed 3 core of 4 Sqmm PVC insulated flat type copper cable for submersible pumpset

124) Supplying and fixing of 50mm dia GI pipes 'B' class in position above ground level

124.1) Supplying and fixing of 32mm dia GI pipes 'B' class in position above ground level

124.2) Supplying and laying of 50 mm dia GI pipe 'B' class including Labour charges Below Ground level

124.4) Supplying and delivery of following dia UPVC specials a) 50mm dia UPVC Elbow

b) 50mm dia UPVC Tee

c) 50 x 40 mm dia UPVC Reducer

d) 50mm dia UPVC End cap

e) 50mm dia UPVC Hex Nipple

f) 50mm dia UPVC Bend

g) 32mm dia UPVC FTA

h) 32mm dia UPVC MTA

125.2) Supplying and laying of 50mm dia UPVC pipe including labour charges Below ground level

125.2.1) Supplying and fixing of 40 mm dia UPVC pipe including labour charges Above ground level

125.3) Supplying and fixing of 32mm dia UPVC column pipe for submersible Pumpset including lowering

125.4) Supplying and laying of 32mm dia PVC pipe/10 Kg/cm2 including cost of material and labour charges

127) Supplying and delivery of Nylon rope for tieing of submersible motor pumpset

Numbering Lettering and Elevation arrangements 129) Supplying and fixing Aluminium die casting letters a) 45 cm letters (18")

129.1) Supplying and fixing of Tamilnadu Government Emblem of 3'-3" dia having brass edging logo brass plate

130.1) Supplying and fixing of Plastic name board of required size

131.1) Supplying and fixing of Brass Name board with Brass letter of required size

137) Providing Sthapathy Cornice, Bothiyal, Pillar design at Top box design at bottom work for round column Ground Floor at Center Portico

138) Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated

139) Supplying and delivery of Godrej Navtal 7 levers Lock and Key

140) Supplying and delivery of 32mm dia Stainless steel Adopter

141) Supplying and fixing of 15mm dia CP flange

142) Supplying and fixing of 15mm dia CP Nipple

143) Supplying and fixing of 15mm dia CP Brass Angle Cock Tap

144) Supplying and fixing of Stainless steel Health faucet

145) Supplying and fixing of 20mm dia concealed CP Brass shower valve

146) Supplying and fixing of 15mm dia CP shower arm with shower rose

147) Supplying and fixing of the following Sanitary fittings a) Regular body of concelaed CP Brass stop cock suitable for 20mm pipe line with protection cap (without exposed parts)

b) CP Brass Hand shower (Health faucet) with 8mm dia 1.2mtr long flexible tube and wall Hook

c) CP Overhead shower 180mm dia round shape single flow (ABS Body chrome plated with Gray Face plate) with Rubit cleaning system

d) 20mm dia CP Brass Pillar Cock

e) 15mm dia CP Brass 2 Way Bib Cock with wall Flange

f) 20mm dia CP Brass Angular stop cock with wall flange

g) Exposed part Kit of 20mm dia concealed CP Brass stop cock

h) 15mm dia CP Brass Wall Mixer 3-in-1 system with Provision for both Hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower)

i) CP Shower Arm 20mm dia & 450mm long round shape with 90O bend for wall mounted shower with flange

j) Wall Hung Basin of size 720x465x190mm with fixing accessories

162) Supplying and fixing of 120W LED Street light fitting

163) Supplying and fixing of 150W LED Street light fitting

Amenities 251) Supply and fixing of openable and sliding type cupboard portion as per the drawing in between Commandant Chamber and Rest Room / Pantry by using 18mm tk water proof plywood

252) Supply and fixing of openable and sliding type cupboard portion as per the drawing in the Commandant Rest room by using 18mm tk water proof plywood

253) Supply and filling of Red soil, Organic compost, Good Earth, River sand. The soil mix to be sorted, graded mixed spread and levelled in specified locations & quantity (In loads-3 units) - Red soil and Good Earth (200 cft) Deep red in color, weed free clod free organic composit (100 cft) - Brownish black, Odor free, weed free etc.,

254) Excavating pits of size 0.6m x 0.6m filling with garden soil and Planting shrubs /trees specified below of minimum 1.5m height

255) Excavating pits of size 0.3m x 0.3m filling with garden soil and painting shrubs /trees specified below of minimum 0.35m height a) Agave Americana

b) Tradescatia

c) Exora (Yellow)

d) Exora (Red)

e) Duranta

f) Allamanda

256) Supply and planting of Korean Grass by showing patch (turfing) of Lawn will take over month for the Lawn to grown over the complete area including digging of soil, all debris, stone, weed, root or any other material will be removed

257) Manufacturing, supplying and fixing of stainless steel flag post for National flag using 75mm dia 304L Grade stainless steel pipe of 1.60mm thick at required locations to a height of 7m from finished floor level

258) Supplying and erection of state emblem of India to a height of 1.05m moulded using cement mortar with appropriate ratio of cement, crushed stone sand & water and finixhed with cement slurry including painting with suitable colours using two coats of exterior emulsion over priming coat

259) Supplying and fixing of Block out Roller screen including labour charges for stiching charges with strip cloth at top and 20mm aluminium hanger rods with brackets etc.,

DG set arrangements 516) Supply, installation testing and commissioning of 82.5 KVA Diesel Generator set

517) Erection, Testing and commissioning of 82.5 KVA Diesel generator set

518) Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator

Exhaust Pipe 519) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer

520) Supply and installation of MS exhaust pipe of suitable thickness with 125mm dia complete wih MS wall / ceiling support etc.,

521) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

522) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

Approval from CEIG / CEA 523) Preparation of necessary drawings for both Diesel Generator sets for approval (The building is fed by HT power supply)

524) Providing safety equipments : CO2 fire extinguisher, 1 No, 9 lit capacity fire buckets - 3 Nos. and rubber mat - 1 No. etc

Cabling and End Termination 525) Supply and laying of XLPE, aluminium conductor 1.1 KV grade armoured, MV cable of the following size in the existing cable trays / trenches as required generally confirming to IS 1554/Part-I/1970 a) 3.5 core x 185 Sqmm PVC Aluminium Armoured UG cable

526) Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following size with earth connection a) 3.5 core x 185 Sqmm Brass cable gland

527) Supply and providing cable end termination of following size of XLPE armoured LTUG Aluminium cable with necessary Aluminium cable sockets by crimping etc., a) 3.5 core x 185 Sqmm Aluminium cable end termination

Earthing and Earth connections 528) Earthing as per the ISI speciication with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx6mm

529) Plate earthing as per the ISI specification with an earth electrode of 2.10m class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 600x600x3mm

530) Supply and run of 2 of No. 8 tin coated copper for earth connections

531) Supplying and fixing 25mmx3mm copper strip on surface or in recess for connections as required

532) Supplying and fixing of 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral etc.,

544) Supplying and fixing of Electrically operated sanitary Napkin Incinerator destroyer

551) Supplying and fixing of hydraulic door closer (Heavy)

External Electrical Arrangements 561) Supplying of following sizes of PVC Armoured Aluminium LTUG cable a) 3.5 core 70 Sqmm aluminium LTUG cable

b) 3.5 core 120 Sqmm aluminium LTUG cable

c) 4 core 16 Sqmm aluminium LTUG cable

561.1) Labour charges for laying of PVC Aluminium armoured LTUG cable above ground level

561.2) Labour charges for laying of PVC Aluminium armoured LTUG cable excluding civil works below ground level

562) Supplying and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection a) 3.5 core 120 Sqmm brass cable gland

b) 3.5 core 70 Sqmm brass cable gland

c) 4 core 16 Sqmm brass cable gland

563) Supplying and providing cable end termination of following sizes of XLPE Armoured LTUG Aluminium cable a) 3.5 core 120 Sqmm cable end termination

b) 3.5 core 70 Sqmm cable end termination

c) 4 core 16 Sqmm cable end termination

563.1) Supply and fixing of triple pole and neutral four way 7 segment 3 tier compartmental type MCB Distribution board

564) Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar

565) Supply and erection of 250 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar

566) Supply, installation, testing and commissioning of following CT metering Panel with wall mounted and all accessories

566.1) Supply and fixing of Manhole cover SFRC for the size of 750mm x 750mm

566.2) Supply and fixing of 40 Amps Rotary switch with 3 Nos. indicator lamps including interconnection wires etc.,

566.3) Supply, installation, testing and commissioning of Cast resin CT'S - 200A/5A, 0.2S Accurcy

566.4) Supply, installation, testing and commissioning of 16 way SS Test Terminal Block with copper wiring etc.,

567) Supplying, fixing and testing and commissioning of MCCB/MCB/Isolator in a sheet steel enclosure on surface/recess including inter connection, Painting etc., a) 40 A TPN 10 KA MCB

b) 10/20/32A DP 10KA MCB

c) 63A TPN 10 KA MCB

Emergency Lighting 568) Supply, Installation, Testing and Commissioning of 2 KVA sineware single phase inverter with Exide/equivalent tubular battery for 30 minutes backup time with suitable rack / trolly for inverter and batteries

569) Supply and fixing of 1000W/230V automatic electric water heater of 25 litres capacity including cost of fixing with all necessary connections, clamps, screws etc.,

570) Supplying of 20 feet street light pole complete set with necessary accessories such as 2"3mm thick MS pipe-10 feet height, 1 ½ " 3mm thick MS pipe-10 feet height, ¾" GI pipe 2½ feet with necessary 1 ½ " ¾" clamp-2 Nos. and 6"x4" street light box-1 No. 10 A connector-1 No. 1.50 Sqmm wire 15mtrs. ½" foundation bolt-4 Nos. 25 W LED street light fittings- 1 No. etc

571) Supplying and fixing of Galvalume sheet roofing 0.47mm thick

572) Supplying fabrication and fixing in position of mild steel angles for truss including cost of all materials and labour charges

Fire Fighting arrangements Fire Alarm system 586) Supply and installation of 12 zone Automatic fire Alarm panel along with battery backup in power failure condition

587) Supply and installation of heat detector to operate on 24V DC supply make system sensor

588) Supply and installation of Electronic hooter 5 watts capacity wall mounting type

589) Supply and installation of manual call point with hammer and chain etc

590) Supply and installation of 2 corex1.0 Sqmm copper cable

591) Supply and installation of Photo electric smoke Detectors

592) Supply and installation of response indicators for smoke detectors inside the rooms

593) Supply and installation of ABC type Fire Extinguishers, cylindrical in shape, wall mounting type, with intial charge and discharge nozzle, capacity 6 Kgs ISI marked

594) Supply and installation of CO2 type fire extinguishers, wall mounting type, cylindrical in shape, with discharge horn, capacity 4.5 Kgs ISI marked

610) Supply and fixing of perforated cable trays made out of 14 SWG CRCA sheet steel of following sizes a) 150 x 50mm

612) Supplying and fixing of Four pole 6 Amps to 32 Amps MCB

613) Supplying and fixing of 1 No. of 300 Amps 500 volts grade porcelin fuse unit