Construction Of Home Guard Office at Kapadvanj Dist:- Kheda (Incl. Electrification)

Name of Work : Construction Of Home Guard office at Kapadvanj, Dist:- Kheda (Incl. Electrification)

SOR 2024-25 (Kheda)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs

Description Total Qty Unit Rate Rate In Word Rs. Amount

1 Excavation for foundation upto 1.5 mt depth including sorting out 825.00 Cmt 253.58 RS: Two Hundred

and stacking of useful materials and disposing off the excavated stuff Fifty Three and Paise Fifty

upto Any lead & Lift (C) Hard Murram Eight only

2 Excavation for foundation in (C) Hard Murram From 1.5 to 3.00 mt 226.00 Cmt 270.83 RS: Two Hundred

depth including sorting out and stacking of useful materials and disposing Seventy and Paise Eighty

of the excavated stuff upto ANY lead & Left. Three only

3 Excavation for foundation in (C) Hard Murram From 3.0 to 5.00 mt 39.00 Cmt 282.90 RS: Two Hundred

depth including sorting out and stacking of useful materials and disposing Eighty Two and Paise

of the excavated stuff upto ANY lead & Left. Ninty only

4 Providing & laying Controlled CEMENT CONCRETE 1:3:6 ( 1 cement ; 3 15.00 Cmt 2976.00 RS: Two Thousand

coarse sand; 6 crushed stone aggregates and curing complete including Nine Hundred Seventy Six

cost of formwork in foundation and plinth. only

5 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 127.00 Cmt 2653.67 RS: Two Thousand Six

8 crushed stone aggregates 40mm nominal size) and curing complete Hundred Fifty Three and

including cost of form work in foundation and plinth Paise Sixty Seven only

6 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 32.00 Cmt 2492.51 RS: Two Thousand

10 graded stone aggrigates of 40 mm nominal size) curing complete Four Hundred Ninty Two

inculuding cost of formwork in FOUNDATION AND PLINTH. and Paise Fifty One only

7 Providing & laying Controlled Cement Concrete M 150 and curing 70.00 Cmt 3942.50 RS: Three Thousand

complete including cost of Formwork of Plywood only with fair finish so as Nine Hundred Forty Two

to give fair finish and Excluding cost of reinforcement for reinforced and Paise Fifty only

concrete work in foundation & plinth. Rate are also inclusive of providing

and mixing Plasticizer of approved make in proportion as Per Mix Design.

8 Providing & laying Controlled CEMENT CONCRETE M-300 and 12.00 Cmt 4712.94 RS: Four Thousand

finishing smooth with curing etc complete including the cost of plywood Seven Hundred Twelve

formwork only with fair finish but excluding the cost of reinforcement in and Paise Ninty Four only

FOOTING base of columns and Mass concrete. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

Description Total Qty Unit Rate Rate In Word Rs. Amount

9 Provinding and Laying controlled cement concrete M-300 and Finishing 22.00 Cmt 8020.52 RS: Eight Thousand

smooth with curing etc.complete. Including the cost ofplywood formwork Twenty and Paise Fifty

only with fair finish but excluding the cost of reinforcement for R.C.C work Two only

in Horizontal & Vertical WALLS heving any cross section area of Wall f.

Rate are inclusive of providing and mixing plastisizer of approved make in

propertion as per mix design.

10 Providing & laying Controlled CEMENT CONCRETE M-250 and 105.00 Cmt 4550.55 RS: Four Thousand

finishing smooth with curing etc complete including the cost of plywood Five Hundred Fifty and

formwork only with fair finish but excluding the cost of reinforcement in Paise Fifty Five only

FOOTING base of columns and Mass concrete. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as Per Mix

11 Providing & laying controlled CEMENT CONCRETE of M- 250 and 23.00 Cmt 8613.29 RS: Eight Thousand

Finishing smooth with curing complete including the cost of plywood Six Hundred Thirteen and

formwork only with fair finish but excluding the cost of reinforcement for Paise Twenty Nine only

RCC work in Column up to plinth for any cross sectional area. of Column

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

12 Providing & laying Controlled CEMENT CONCRETE M-250 & finishing 22.00 Cmt 7021.28 RS: Seven Thousand

smooth with curing etc. complete including cost of plywood formwork only Twenty One and Paise

with fair finish but excluding cost of reinforcement For Plinth Beam Twenty Eight only

Having any C/s Area. Rate are inclusive of Pro.& Mix plastisizer of

approved make in proportion as per mix design.

13 Providing and laying Controlled cement concrete M-250 and finishing 7.00 Cmt 8737.52 RS: Eight Thousand

smooth with curing etc.. complete including the cost of plywood formwork Seven Hundred Thirty

only with fair finish exculding the cost of reinforcement of BEAMS having Seven and Paise Fifty Two

any cross sectional area of Beam For GROUND FLOOR. Rate are also only

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

14 Brick work using common burnt clay building bricks having crushing 324.00 Cmt 3981.21 RS: Three Thousand

strength not less than 35 Kg/Sq.cm.in foundation and plinth in cement Nine Hundred Eighty One

mortar 1:6 (1-cement:6-coarse sand) (B) Conventional bricks and Paise Twenty One

15 Provinding and Laying controlled cement concrete M-250 and with curing 6.00 Cmt 5906.91 RS: Five Thousand

etc.complete. Including the cost of plywood formwork only with fair finish Nine Hundred Six and

but excluding the cost of reinforcement for R.C.C work in Coping . Rate Paise Ninty One only

are inclusive of providing and mixing plastisizer of approved make in

propertion as per mix design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

16 Provinding and Laying controlled cement concrete M-200 and with curing 12.00 Cmt 5849.63 RS: Five Thousand

etc.complete. Including the cost of plywood formwork only with fair finish Eight Hundred Forty Nine

but excluding the cost of reinforcement for R.C.C work in Coping . Rate and Paise Sixty Three

are inclusive of providing and mixing plastisizer of approved make in only

propertion as per mix design.

17 Filling available excavated earth (excluding rock) in trenches. 614.00 Cmt 129.10 RS: One Hundred

plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth Twenty Nine and Paise

consolidating each disposited layer by ramming and watering. Ten only

18 Filling in Foundation and Plinth with selected soil or murrum in layers of 737.00 Cmt 279.23 RS: Two Hundred

20cms. thickness including watering, ramming, consolidating and dressing Seventy Nine and Paise

etc.complete As Per Engineer In-Ccharge. Twenty Three only

19 FILLING in plinth with SAND under floors including watering, raming 37.00 Cmt 455.63 RS: Four Hundred

consolidating and dressing etc. complete. Fifty Five and Paise Sixty

20 Applying general insecticide pest control treatment to floors, 366.00 Smt 88.40 RS: Eighty Eight and

cupboards etc including labour material etc. complete. Using Paise Forty only

Heptachloride 20 EC. As Per 6113_pests Consentration Weight

percent is recommended one litre chemical emulsion dillute with 39 liter of

water will give. Total dillute concrentration will be 40 litre inclusive of one

litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S code

21 Providing & laying controlled CEMENT CONCRETE of M- 200 and 26.00 Cmt 10301.99 RS: Ten Thousand

Finishing smooth with curing complete including the cost of plywood Three Hundred One and

formwork only with fair finish but excluding the cost of reinforcement for Paise Ninty Nine only

RCC work in Column For GROUND FLOOR for any cross sectional area.

of Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

22 Providing & laying controlled CEMENT CONCRETE of M- 200 and 26.00 Cmt 10341.39 RS: Ten Thousand

Finishing smooth with curing complete including the cost of plywood Three Hundred Forty One

formwork only with fair finish but excluding the cost of reinforcement for and Paise Thirty Nine

RCC work in Column For FIRST FLOOR for any cross sectional area. of only

Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

23 Providing & laying controlled CEMENT CONCRETE of M- 200 and 4.00 Cmt 10380.79 RS: Ten Thousand

Finishing smooth with curing complete including the cost of plywood Three Hundred Eighty and

formwork only with fair finish but excluding the cost of reinforcement for Paise Seventy Nine only

RCC work in Column For SECOND FLOOR for any cross sectional area.

of Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

24 Providing and laying Controlled cement concrete M-200 and finishing 33.00 Cmt 8680.25 RS: Eight Thousand

smooth with curing etc.. complete including the cost of plywood formwork Six Hundred Eighty and

only with fair finish exculding the cost of reinforcement of BEAMS having Paise Twenty Five only

any cross sectional area of Beam For GROUND FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

25 Providing and laying Controlled cement concrete M-200 and finishing 26.00 Cmt 8719.65 RS: Eight Thousand

smooth with curing etc.. complete including the cost of plywood formwork Seven Hundred Ninteen

only with fair finish exculding the cost of reinforcement of BEAMS having and Paise Sixty Five only

any cross sectional area of Beam For FIRST FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

26 Providing and laying Controlled cement concrete M-200 and finishing 3.00 Cmt 8759.05 RS: Eight Thousand

smooth with curing etc.. complete including the cost of plywood formwork Seven Hundred Fifty Nine

only with fair finish exculding the cost of reinforcement of BEAMS having and Paise Five only

any cross sectional area of Beam For SECOND FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

27 Providing & Laying Controlled Cement Concrete M-250 & and finishing 4.00 Cmt 7702.61 RS: Seven Thousand

smooth with Curing Complete including the cost of plywood formwork only Seven Hundred Two and

with fair finish but excluding cost of the reinforcement for RCC Work in Paise Sixty One only

SLAB having thickness of 13cm TO 15cm at GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

28 Providing & Laying Controlled Cement Concrete M-250 & and finishing 3.00 Cmt 8126.51 RS: Eight Thousand

smooth with Curing Complete including the cost of plywood formwork only One Hundred Twenty Six

with fair finish but excluding cost of the reinforcement for RCC Work in and Paise Fifty One only

SLAB having thickness of 10cm TO 13cm at GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

29 Providing & Laying Controlled Cement Concrete M-200 & and finishing 53.00 Cmt 8018.25 RS: Eight Thousand

smooth with Curing Complete including the cost of plywood formwork only Eighteen and Paise

with fair finish but excluding cost of the reinforcement for RCC Work in Twenty Five only

SLAB having thickness of 10cm TO 13cm at GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

30 Providing & Laying Controlled Cement Concrete M-200 & and finishing 48.00 Cmt 8057.65 RS: Eight Thousand

smooth with Curing Complete including the cost of plywood formwork only Fifty Seven and Paise

with fair finish but excluding cost of the reinforcement for RCC Work in Sixty Five only

SLAB having thickness of 10cm TO 13cm at FIRST FLOOR. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

31 Providing & Laying Controlled Cement Concrete M-200 & and finishing 4.00 Cmt 8097.05 RS: Eight Thousand

smooth with Curing Complete including the cost of plywood formwork only Ninty Seven and Paise

with fair finish but excluding cost of the reinforcement for RCC Work in Five only

SLAB having thickness of 10cm TO 13cm at SECOND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

32 Providing & Laying Controlled Cement Concrete M-200 & and finishing 9.00 Cmt 7594.35 RS: Seven Thousand

smooth with Curing Complete including the cost of plywood formwork only Five Hundred Ninty Four

with fair finish but excluding cost of the reinforcement for RCC Work in and Paise Thirty Five only

SLAB having thickness of 13cm TO 15cm at GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

33 Providing & Laying Controlled Cement Concrete M-200 & and finishing 2.00 Cmt 7633.75 RS: Seven Thousand

smooth with Curing Complete including the cost of plywood formwork only Six Hundred Thirty Three

with fair finish but excluding cost of the reinforcement for RCC Work in and Paise Seventy Five

SLAB having thickness of 13cm TO 15cm at FIRST FLOOR. Rate are only

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

34 Providing and laying Controlled cement concrete M-200 for R.C.C. 5.00 Cmt 8404.01 RS: Eight Thousand

LINTEL including finishing smooth with curing etc. Complete including the Four Hundred Four and

cost of plywood formwork only with fair finish but excluding the cost of Paise One only

reinforcement for GROUND FLOOR Providing and Mixing Plasticiser in

cement concrete including rate of labour,material etc.as per direction of

Engineer in charge.

Description Total Qty Unit Rate Rate In Word Rs. Amount

35 Providing and laying Controlled cement concrete M-200 for R.C.C. 4.00 Cmt 8443.41 RS: Eight Thousand

LINTEL including finishing smooth with curing etc. Complete including the Four Hundred Forty Three

cost of plywood formwork only with fair finish but excluding the cost of and Paise Forty One only

reinforcement for FIRST FLOOR Providing and Mixing Plasticiser in

cement concrete including rate of labour,material etc.as per direction of

Engineer in charge.

36 Providing and laying Controlled cement concrete M-200 for R.C.C. 1.00 Cmt 8482.81 RS: Eight Thousand

LINTEL including finishing smooth with curing etc. Complete including the Four Hundred Eighty Two

cost of plywood formwork only with fair finish but excluding the cost of and Paise Eighty One

reinforcement for SECOND FLOOR Providing and Mixing Plasticiser in only

cement concrete including rate of labour,material etc.as per direction of

Engineer in charge.

37 Provinding and Laying controlled cement concrete M-250 for reinforced 18.00 Cmt 9285.86 RS: Nine Thousand

conerete CHHAJJAS not exceeding 10cm thickness up to floor two level Two Hundred Eighty Five

including finishing the exposed surface with cement mortar 1:3 ( 1 cement and Paise Eighty Six only

: 3 fine sand) to give a smooth surface ,centering and plywood .formwork

only with fair finish and curing complete. excluding cost of reinforcement

for ALL FLOOR. Providing and Mixing Plasticiser in cement concrete

including rate of labour,material etc.as per direction of Engineer in charge.

38 Providing and laying Controlled cement concrete M-200 including finishing 7.00 Cmt 7995.88 RS: Seven Thousand

smooth for R.C.C. STAIR CASE including centering plywood formwork Nine Hundred Ninty Five

only with fair finish and curing etc. Complete excluding cost of and Paise Eighty Eight

reinforcement for ALL FLOORS. Providing and Mixing Plasticiser in only

cement concrete including rate of labour,material etc.as per direction of

Engineer in charge.

39 Brick Bat Filling 40mm thick at Required Depth as per Drawings and 16.00 Cmt 489.79 RS: Four Hundred

Specifications and Direction of Engg - in - Charge. Eighty Nine and Paise

Seventy Nine only

40 Honey Comb common burnt clay building bricks having crushing strength 6.00 Cmt 2667.41 RS: Two Thousand Six

not less than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in cement Hundred Sixty Seven and

mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ) Paise Forty One only

41 BRICK WORK using common burnt clay building bricks having crushing 118.00 Cmt 4246.86 RS: Four Thousand

strength not less than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement Two Hundred Forty Six

: 6 Fine sand ( Conventional Bricks ) for Ground Floor. Mortar shall be and Paise Eighty Six only

prepared by mixture machine only.

42 BRICK WORK using common burnt clay building bricks having crushing 96.00 Cmt 4286.65 RS: Four Thousand

strength not less than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement Two Hundred Eighty Six

: 6 Fine sand ( Conventional Bricks ) for First Floor. Mortar shall be and Paise Sixty Five only

prepared by mixture machine only.

Description Total Qty Unit Rate Rate In Word Rs. Amount

43 BRICK WORK using common burnt clay building bricks having crushing 44.00 Cmt 4326.44 RS: Four Thousand

strength not less than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement Three Hundred Twenty Six

: 6 Fine sand ( Conventional Bricks ) for Second Floor. Mortar shall be and Paise Forty Four only

prepared by mixture machine only.

44 HALF BRICK masonary in common brunt clay building bricks having 4.00 Smt 593.90 RS: Five Hundred

crushing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 Ninty Three and Paise

cement : 4 coarse sand ) conventional bricks for Foundation & Plinth.. Ninty only

Mortar shall be prepared by mixture machine only .

45 HALF BRICK masonary in common brunt clay building bricks for Ground 81.00 Smt 645.22 RS: Six Hundred Forty

Floor. Mortar shall be prepared by mixture machine only . Five and Paise Twenty

46 HALF BRICK masonary in common brunt clay building bricks having 101.00 Smt 651.16 RS: Six Hundred Fifty

crushing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 One and Paise Sixteen

cement : 4 coarse sand ) conventional bricks for First Floor. Mortar shall only

be prepared by mixture machine only .

47 Providing 10 mm thick cement PLASTER in single coat on ceilings for 457.00 Smt 215.31 RS: Two Hundred

interior plastering and finished even & smooth in C.M. 1:3 ( 1 cement : 4 Fifteen and Paise Thirty

sand ) including finishing with a floating coat of neat cement slurry at One only

Ground Floor. Mortar shall be prepared by mixture machine only.

48 Providing 10 mm thick cement PLASTER in single coat on ceilings for 382.00 Smt 240.53 RS: Two Hundred

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 Forty and Paise Fifty

sand ) including finishing with a floating coat of neat cement slurry at First Three only

Floor. Mortar shall be prepared by mixture machine only.

49 Providing 10 mm thick cement PLASTER in single coat on ceilings for 26.00 Smt 265.75 RS: Two Hundred

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 Sixty Five and Paise

sand ) including finishing with a floating coat of neat cement slurry at Seventy Five only

Second Floor. Mortar shall be prepared by mixture machine only.

50 Providing 15 mm thick cement PLASTER in single coat on brick or 999.00 Smt 219.41 RS: Two Hundred

concrete wall for interior plastering and finished even and smooth in C.M. Ninteen and Paise Forty

1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat One only

cement slurry at Ground Floor. Mortar shall be prepared by mixture

51 Providing 15 mm thick cement PLASTER in single coat on brick or 964.00 Smt 246.52 RS: Two Hundred

concrete wall for interior plastering and finished even and smooth in C.M. Forty Six and Paise Fifty

1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat Two only

cement slurry at First Floor.Mortar shall be prepared by mixture machine

Description Total Qty Unit Rate Rate In Word Rs. Amount

52 Providing 15 mm thick cement PLASTER in single coat on brick or 226.00 Smt 273.63 RS: Two Hundred

concrete wall for interior plastering and finished even and smooth in C.M. Seventy Three and Paise

1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat Sixty Three only

cement slurry at Second Floor. Mortar shall be prepared by mixture

53 Providing 20 mm thick SAND FACED cement Plaster on walls above 948.00 Smt 332.33 RS: Three Hundred

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : Thirty Two and Paise

3 sand ) and 8mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Thirty Three only

Complete for any height. Mortar shall be prepared by mixture machine

only. Plaster should be done by gutkha only.

54 Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 1060.00 Smt 494.76 RS: Four Hundred

20mm thick cement plaster in single coat plastering upto floor two level Ninty Four and Paise

Outside and finished even and smooth in (i) Cement mortar 1:3 (1-cement Seventy Six only

: 3-sand) as Base Coat and providing 2-3 mm thick synthetic texture

plaster of approved texture (Material Shall be Used as Approved By

GSPHCL Only ) including cost of all materials, labour, conveyance, loading

and unloading, taxes, royalties, scaffolding, watering etc.complete for any

Height as per Drawing and instructions of Engineer -in -Charge.

55 Providing 10 mm thick cement PLASTER in single coat of interior 193.00 Smt 198.56 RS: One Hundred

plastering and finished even and smooth in cement mortar 1:3 ( 1 cement : Ninty Eight and Paise Fifty

3 sand ) and finishing with floating coat of neat cement slurry including Six only

providing and mixing Water Proofing material in C.M. in proportion

recommended by the manufactures for all floors.Mortar shall be prepared

by mixture machine only.

56 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing 23.00 Smt 110.70 RS: One Hundred Ten

paint treatment treatment in two coats of vertical and horizontal surface of and Paise Seventy only

depressed portion of Bath/W.C. as directed by engineer in charge.This

treatment shall be carried out over & above water proofing plaster.

57 Providing Cement vata (10 cm x 10 cm size) quarter round in cement 298.00 Rmt 23.45 RS: Twenty Three

mortar 1:1 including neat cement finishing, watering etc.complete. and Paise Forty Five only

58 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. 4.00 Cmt 791.68 RS: Seven Hundred

Complete. Ninty One and Paise Sixty

59 Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 course 35.00 Smt 348.08 RS: Three Hundred

sand :4 graded stone aggregate 20mm nominal size) laid in one layer Forty Eight and Paise

finished with a floating coat of neat cement. (B) 50 mm thick. Eight only

Description Total Qty Unit Rate Rate In Word Rs. Amount

60 Provinding and fixing chicken wire mesh Jali 18 Gauge or Fibre Mesh of 205.00 Smt 64.06 RS: Sixty Four and

145 GSm and 0.18mt wide with necessary screws and nails to joint or Paise Six only

crack between R.C.C. column and brick work etc. complete as per

Engineer-in-charge.wire mesh jail Shall confrom to relevant is Specifiction

61 Providing & Lay 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 630.00 Smt 1498.40 RS: One Thousand

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 Four Hundred Ninty Eight

coarse sand) on new surface orfixing on existing flooring by adhesive and Paise Forty only

including dismentaling of existing flooring and material jointed with color

cement slurry including finised with flush pointing & cleaning the surface

etc. complete for light shade

62 Providing and laying double charge Vitrified tiles 8mm to 10mm thicke of 47.00 Smt 1392.20 RS: One Thousand

approved brand and manufacture with sizing in skirting of 10mm thick Three Hundred Ninty Two

cement mortar plaster 1:3(-1-cement;3-coarse sand) or jointed with white and Paise Twenty only

cement slurry including flush pointing, rubbing and curing etc .complete.

63 Providing & Lay 24" x 24" Anti skid vitrified 8 to 10 mm thick tile flooring 51.00 Smt 1383.99 RS: One Thousand

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse Three Hundred Eighty

sand) on new surface orfixing on existing flooring by adhesive including Three and Paise Ninty

dismentaling of existing flooring and material jointed with color cement Nine only

slurry including finised with flush pointing & cleaning the surface etc.

complete for light shade

64 Proviidng and Laying coloured glazed tiles of the size 207.00 Smt 1403.33 RS: One Thousand

300mmx600mmx8mm in skirting,risers of steps and dedo on 10mm thick Four Hundred Three and

cement plaster 1:3(1cement:3 coarse sand)& jointed with white cement Paise Thirty Three only

65 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for 83.00 Smt 2428.00 RS: Two Thousand

jambs and sills of doors & windows using neat cement slurry laid over 20 Four Hundred Twenty

mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and Eight only

jointed with grey cement slurry including racking(Tancha Work) rubbing

and polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with

base of neat cement) as per direction of Engineer in charge including fully

rounding the exposed edges as directed.

66 Pro and Laying 25mm thick Doubel Pre polished ( Dimond polished ) 43.00 Smt 1078.70 RS: One Thousand Ten

polished kota stone flooring over average 20mm thick base of cement Hundred Seventy Eight

mortar 1:6 ( 1 cement : 6 coarse sand ) and jointeed with gray cement and Paise Seventy only

slarry including rubbing and polishing etc. complete All kota stone edge

shall be hand cutting Machine Cut shall be not allowed..

Description Total Qty Unit Rate Rate In Word Rs. Amount

67 Pro and Laying Doubel Pre polished ( Dimond polished ) polished kota 5.00 Smt 1215.70 RS: One Thousand

stone slab 25mm thick in risers of steps.dedo,Skirting and pillars laid on Two Hundred Fifteen and

10mm thick cement mortar 1:3 ( 1 cement : 3 coars sand ) and jointed Paise Seventy only

with gray cement slarry including rubbing & polishing etc. complete

68 Providing and fixing both side polished machine cut KOTA STONE In 35.00 Smt 793.90 RS: Seven Hundred

Green Colour Shelves / Partitions 20mm to 25mm thick embaded in to wall Ninty Three and Paise

at support including racking and finishing smooth the surface including Ninty only

cutting the stone as and where required etc. complete including fully

rounding of exposed edges etc. complete for ALL FLOORS.

69 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm 7.00 Rmt 3757.60 RS: Three Thousand

high resting on thick sandwiched polish Granite Slab in C.M 1:3 with Seven Hundred Fifty Seven

providing and fixing 25 mm thick rough kota stone at bottom and 20 to 25 and Paise Sixty only

mm thick Polish Granite stone ( single piece/ telephonic Black ) top &

Vertical and polished granite stone (single piece/ telephonic Black ) 20 to

25mm thick on top & 18mm thick in Vertical with 15mm high machine cut

polished granite round moulded Top facia patty including polishing etc .

complete as per drawing and specification without stainless steel sink

including necessary cutting for sink & making hole for gas pipe and fixing

P.V.C bend of 25mm dia.

70 Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin 2.00 No. 3695.00 RS: Three Thousand

Finish Kitchen Sink of over all Minimum size 533mm x 457mm x 203mm Six Hundred Ninty Five

deep having bowl Minimum size 470mm x 395mm x 203mm Finishing with only

cement mortar 1:3 (1-Cement : 3-Fine Sand) etc. Complete. Rate including

of 32mm dia. C.P. Brass Waste Coupling and 32mm dia. Rigid PVC

Waste Pipe upto N.T. (S.S. Kitchen Sink Shall be of Nirali, Navkar, Carysil

or Krishna make Only) for ALL FLOORS.

71 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & 2.00 No. 1330.32 RS: One Thousand

Wall Flange . Rate are inclusive of all matreials, Labour & Necessary Three Hundred Thirty and

Fittings etc. Complete as per Detailed Drawings, Specifications and as per Paise Thirty Two only

the Instruction of Engineer In charge. The Model & Make of Sink Cock

Shall be as per the Approved Make List of GSPHCL.

Description Total Qty Unit Rate Rate In Word Rs. Amount

72 Providing and fixing extruted Aluminium section window having extruded 11.00 Smt 2119.14 RS: Two Thousand

Aluminium Colour anodized section frame main outer size 127mm x One Hundred Ninteen and

38.10mm x 1.35mm @ wt.of 1.384 Kg/mt, horizontal Four track member Paise Fourteen only

size 122.20mm x 31.75mm x 1.10mm @ Wt.1.205 Kg/mt , vertical member

of size 122.20mm x 31.75mm x 1.50mm @ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete for window. for

73 Providing and fixing Alluminium section window having extruded 75.00 Smt 1568.27 RS: One Thousand Five

Aluminum Colour anodized section frame main outer size 95mm x Hundred Sixty Eight and

24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), Paise Twenty Seven only

horizontal Three track member size 92mm x 31.75mm x 1.30mm (of

Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size

92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt)

with sliding shutters.of horizontal member size 40 mmx18mm x1.29mm (of

Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size

40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float glass with colour

anodized aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details With Both Side Locking Arrangment

74 Providing and fixing standard extruded of alluminium section of size 63 * 6.00 Smt 1163.92 RS: One Thousand One

38.10 * 1.2 mm ( Jindal section NO:2434,@Wt 0.643 Kg/RMT )with colour Hundred Sixty Three and

aNOdized alluminium frame for ventilation with 5 mm thick frosted glass Paise Ninty Two only

as details etc complete for ventilation

75 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door 18.00 Smt 11082.31 RS: Eleven Thousand

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Eighty Two and Paise

Construction of Flush Door is with Pine or southern Yellow Pine Filler and Thirty One only

2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with

Lock rail on Center. ........

Description Total Qty Unit Rate Rate In Word Rs. Amount

on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of

size 150mm x 70mm with Chemically Treated and Seasoned Including

Paint Matching with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi

and harmful insects also warranty against seasoning related issues like

crack, bending, twisting, warping. Laminates on shutter shall be press by

cold press method. Shutter shall be.........

removed on completion of work in such a way that shutter & Frame is free

from nail mark & any damages etc. Rates are also Inclusive of all Labors &

Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch

S.S. but Hinges, ...........

and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details ...........

Shall be as Per approved Material Make List of G.S.P.H.C. The Required

Frame is to be Obtained from Vanil Udhyog Maked Only.Rate Including

Bedding Patti 40 x 10mm

76 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door 27.00 Smt 8399.74 RS: Eight Thousand

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Three Hundred Ninty Nine

Construction of Flush Door is with Pine or southern Yellow Pine Filler and and Paise Seventy Four

2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with only

Lock rail on Center. ........

on Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of

size 100mm x 60mm with Chemically Treated and Seasoned Including

Paint Matching with Laminates. Frame & Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi

and harmful insects also warranty against seasoning related issues like

crack, bending, twisting, warping. Laminates on shutter shall be press by

cold press method. Shutter shall be.........

removed on completion of work in such a way that shutter & Frame is free

from nail mark & any damages etc. Rates are also Inclusive of all Labors &

Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch

S.S. but Hinges, ...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm

Long X 10mm thick. Door are Fixing as per Details ...........

Shall be as Per approved Material Make List of G.S.P.H.C. The Required

Frame is to be Obtained from Vanil Udhyog Maked Only.Rate Including

Bedding Patti 40 x 10mm

77 Provinding and Laying 18 mm thick Telephonic black Granite Stone 48.00 Smt 2128.80 RS: Two Thousand

Slab Flooring over 20mm thick average base of C.M. 1:6 (1cement : 6 One Hundred Twenty Eight

coarse sand) laid and jointed with grey cement slury including Rubbing and and Paise Eighty only

Polishing etc. Complete for All Floors.

78 Provinding and Laying 18 mm thick Telephonic black Granite stone 17.00 Smt 2265.83 RS: Two Thousand

slab in Skirting / Dado over 10mm thick average base of C.M. 1:3 Two Hundred Sixty Five

(1:cement :3 coarse sand) laid and jointed with grey cement slury including and Paise Eighty Three

Rubbing and Polishing etc. Complete for All Floors. only

79 Moulding Of Kota Stone/Granite Stair Trade Complete As Per Direction 87.00 Rmt 129.95 RS: One Hundred

Of Engineer In Charge Twenty Nine and Paise

Ninty Five only

80 Pro. 3 Nos Groove In Total Length Of Staircase Tread Of Size 87.00 Rmt 82.80 RS: Eighty Two and

10mm*10mm Finished Smooth In Parallel Line , Equally Spaced As Per Paise Eighty only

Direction Of Engineer In-Charge In All Type Of Flooring , Etc. Complete

81 Providing & Fixing Granite shelves of 18 mm thk For Bath room & 6.00 Smt 2115.40 RS: Two Thousand

wash basin only with Moulding on al sides incl. making Grooves in One Hundred Fifteen and

the wall and then making it good as per Engi.in charge. Paise Forty only

82 Providing and fixing solid PVC Flush Door shutter 24mm thick. made 23.00 Smt 4511.18 RS: Four Thousand

from Co-extruded three layer rigid PVC foam sheet(single Extruded) with Five Hundred Eleven and

density not less than 600kg/cbm outer layer (0.8-1mm)thick should be rigid Paise Eighteen only

PVC with density of not less than 1400kg/cbm. Door should be water

proof, Termite proof, fire retardant & having good screw holding

capacity(200 kgf). Providing and fixing 100% Solid Wood Plastic

composite (WPC) Door Frame 90mmx45mm made from wood plastic

composite(single Extruded Process)material with density 780kg/cbm. As

per drawing as directed by the engineer in charge.including PVC beading

Description Total Qty Unit Rate Rate In Word Rs. Amount

83 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste pipe 65.00 Rmt 471.36 RS: Four Hundred

with ' O ' Ring 110 mm dia. of ISI13592/92-2013 (Reaffirmed 2018) or its Seventy One and Paise

relevant & latest edition & Pipe fixing for Vertical Drain pipe, etc.complete Thirty Six only

and making good the wall ceiling and floor. (B) 110mm dia

84 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste 84.00 Rmt 245.74 RS: Two Hundred

pipe with "O" ring of ISI13592/92-2013 (Reaffirmed 2018) or its relevant Forty Five and Paise

& latest edition &, Pipe fixing for Vertical Drain pipe, etc.complete and Seventy Four only

making good the wall ceiling and floor. (A) 75mm dia

85 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 118.00 Rmt 302.54 RS: Three Hundred

90mm Dia Complete with Special flings, Compressor type Fittings, Pipe Two and Paise Fifty Four

fixing for Vertical Rain water pipe, Including making good the ceiling and only

floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe

and vertical pipe and 90mm bend at the end near by Ground level rate are

Inclusive of all Necessary Fittings required.

86 Providing and fixing concealed or open center point to wall ceiling & floor 48.00 Rmt 202.97 RS: Two Hundred

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal Two and Paise Ninty

for potable water of following dia. nominal bore tube fittings and clamps Seven only

including making good the wall, ceiling and floor etc. complete. Pipe shall

be concealed or open as mention in tender description. Pipe shall be as

per approved make of GSPHCL make list. [B] 20 mm inner dia.

87 Providing and fixing concealed or open center point to wall ceiling & floor 74.00 Rmt 247.25 RS: Two Hundred

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal Forty Seven and Paise

for potable water of following dia. nominal bore tube fittings and clamps Twenty Five only

including making good the wall, ceiling and floor etc. complete. Pipe shall

be concealed or open as mention in tender description. Pipe shall be as

per approved make of GSPHCL make list. [C] 25mm inner dia.

88 Providing and fixing concealed or open center point to wall ceiling & floor 39.00 Rmt 437.66 RS: Four Hundred

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal Thirty Seven and Paise

for potable water of following dia. nominal bore tube fittings and clamps Sixty Six only

including making good the wall, ceiling and floor etc. complete.rate

including Z-patti. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list. [D]

40 mm inner dia.

Description Total Qty Unit Rate Rate In Word Rs. Amount

89 Providing and fixing concealed or open center point to wall ceiling & floor 56.00 Rmt 647.30 RS: Six Hundred Forty

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal Seven and Paise Thirty

for potable water of following dia. nominal bore tube fittings and clamps only

including making good the wall, ceiling and floor etc. complete.rate

including Z-patti. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list. [D]

50 mm inner dia.

90 Providing and fixing concealed or open center point to wall ceiling & floor 189.00 Rmt 1312.94 RS: One Thousand

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal Three Hundred Twelve

for potable water of following dia. nominal bore tube fittings and clamps and Paise Ninty Four only

including making good the wall, ceiling and floor etc. complete.rate

including Z-patti. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list. [D]

65 mm inner dia.

91 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt 120.00 Each 182.83 RS: One Hundred

Rubber mounted for Pipe Supporting Clamping System for External Eighty Two and Paise

Vertical Fixed line with wall distance 3" including nuts, bolts, fastners etc Eighty Three only

complete as per detailed Specifications and as directed by Engineer in

92 Providing Supplying and Fixing S4 Channel System (S4 Channel + 124.00 Each 421.58 RS: Four Hundred

Profile Bracket + U Bolt Rubber mounted System) for multiple Pipes for Twenty One and Paise

External Vertical Fixed line with wall distance 3" including nuts, bolts, Fifty Eight only

fastners etc complete as per detailed Specifications and as directed by

Engineer in Charge.

93 Provinding and laying inegrated cement based water proofing treatment of 473.00 Smt 929.50 RS: Nine Hundred

required thickness over the roof including 10mm thick waterproofing Twenty Nine and Paise

cement plaster in cement plaster in cement mortar1:3 and chaina mosaic Fifty only

fitting and finally finishing the surfase with white cement slurry and

slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less

then 45mm, including treating the vertical surfaseof the parapet wall up to

20cms . height above finished level of terracing including finishing the top

with joint less water proofing plaster , curing , testing etc. complete. Rate is

including ten years performance of guarantee bond to be given on stamp

paper. (No extra shall be paid for increase in thickness for proper slope).

Description Total Qty Unit Rate Rate In Word Rs. Amount

cement admixed with properly water proofing compound conforming to IS -

2645 and 10 mm thick water proofing cement plaster in Cement mortar 1:3

over the R.C.C.slab incl. cleaning the surface before treatment

with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick

water proofing cement plaster in cement mortar 1:3 (1 cement ,3 coarse

sand) admixed with proprietary water proofing compound conforming to IS

2645 to required slope and treating similarly the adjoining walls up to

200mm height incl. rouding of junction of walls.

less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry

minimum period of two weeks for curring for final taste

All above operation to be done in order and as directed and specified

by the Engineer In Charge.

94 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern 10500.00 Kg 74.94 RS: Seventy Four

fabricated from M.S. flat,square bars, round bars,c-channel, square/round and Paise Ninty Four only

box pipe as per detail Drawings. Rate is inclusive of welding with grinding

smooth surface, two coats of Oil paint and one coat of yellow Zinc primer

coat of approved brand only. Oil paint shall be used as per Approved

Material List By G.S.P.H.C the Structural Steel Shall be used only ISI mark

95 S.S. Railing. Providing and Fixing of Stainless Steel 304 grade Pipe 25.00 Rmt 3143.43 RS: Three Thousand

Railing 0.90mt. Height. Top Round Pipe (Baluster) of 2" dia. Vertical One Hundred Forty Three

balustrade 1.5" x 1.5" at every max. 0.90mt. c/c and intermediate 3 nos. and Paise Forty Three

runners pipe mid rail of 1" dia. and S.S. base plate of 100 x 8mm. The only

Railing system shall be floor mounted with anchor fastener and base plate

of 100mm size having 8mm thickness completed as per detailed drawing &

as directed by engineer in charge. Rate are inclusive of all material, labour,

taxes & polishing.

Description Total Qty Unit Rate Rate In Word Rs. Amount

96 Providing and fixing Wash down white vitreious china WALL HUNG (as 9.00 No. 5470.90 RS: Five Thousand

Per Approved Material List )water closet EUROPEAN TYPE W/C PAN of Four Hundred Seventy

size 555x360x390mm with intergal "P" trap including jointing the trap with and Paise Ninty only

pan and soil pipe in vitereous china white colour. Rate inclusive of

providing and fixing PVC Flush Tank (as Per Approved Material List ) Soft

seat of the same make. Rate are inclusive of all necessary fittings required

for installation of flushing tank and wall hung. Wall hung shall be fixed on

S.S heavy duty rack bolt having 16mm dia, 165mm length using Plastic

sleeve Make by Using Drill Bitt Only.

97 Providing & Fixing Single Hole Wash Basin with CI or M.S. brackete & M. 9.00 No. 3935.33 RS: Three Thousand

I fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Nine Hundred Thirty Five

Tap, PVC Bottle Trap with Connection 32mm dia. C.P brassa waste and Paise Thirty Three

coupling etc. Complete. Rate are inclusive of all matreials, Labour & only

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications

and as per the Instruction of Engineer In charge. The Model & Make of

Wash Basin pillar tap,Angle tap ,Bottel Trap Shall be as per the Approved

Make List of GSPHCL

98 Providing and fixing 600mm x 450mm beveled edge MIRROR of superior 9.00 No. 825.48 RS: Eight Hundred

glass mounted on 6mm thick A.C. sheet or plywood sheet fixed to wooden Twenty Five and Paise

plugs with C.P. brass screws & washers. Forty Eight only

99 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour 9.00 No. 909.08 RS: Nine Hundred

& Necessary Fittings etc. Complete as per Detailed Drawings, Nine and Paise Eight

Specifications and as per the Instruction of Engineer In charge. The Model only

& Make of Towel Ring Shall be as per the Approved Make List of

100 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour 9.00 No. 1078.70 RS: One Thousand Ten

& Necessary Fittings etc. Complete as per Detailed Drawings, Hundred Seventy Eight

Specifications and as per the Instruction of Engineer In charge. The Model and Paise Seventy only

& Make of Towel Rod Shall be as per the Approved Make List of

101 Provinding and fixing S.S hook rail 8 NOs legs hook on S.S. patti of 12.00 No. 249.84 RS: Two Hundred

400 X 35 X 3 mm size S.S patti. As Per GSPHCL Make List. Forty Nine and Paise

Eighty Four only

102 Provinding and fixing gun metal check or non return full way WHEEL / 5.00 No. 656.86 RS: Six Hundred Fifty

HANDLE VALVE 40 mm dia. Rate are inclusive of all matreials, Labour & Six and Paise Eighty Six

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications only

and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL.

Description Total Qty Unit Rate Rate In Word Rs. Amount

103 Provinding and fixing gun metal check or non return full way WHEEL / 4.00 No. 4865.50 RS: Four Thousand

HANDLE VALVE 65 mm dia. Rate are inclusive of all matreials, Labour & Eight Hundred Sixty Five

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and Paise Fifty only

and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL.

104 Providing and fixing S W R Nahni trap of the following nominal dia. Self 15.00 No. 541.80 RS: Five Hundred

cleaning design with top jali and stainer including cost of cutting and Forty One and Paise

making good the walls and floors 100mm inlet and 50mm outlet.Including Eighty only

150 mm x 150 mm stainless steel jali with grating.

105 Providing and fixing S W R MULTI trap of the following nominal dia. Self 12.00 No. 508.29 RS: Five Hundred

cleaning design with top jali and stainer including cost of cutting and Eight and Paise Twenty

making good the walls and floors 100mm inlet and 50mm outlet.Including Nine only

150 mm x 150 mm stainless steel jali with grating.

106 Providing & Fixing SHOWER WITH ARMS (as Per Approved Material 5.00 No. 931.79 RS: Nine Hundred

List ) ,make with all neccery fitting. Rate are inclusive of all matreials, Thirty One and Paise

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Seventy Nine only

Specifications and as per the Instruction of Engineer In charge. The Model

& Make of SHOWER WITH ARMS Shall be as per the Approved Make

List of GSPHCL.

107 Providing & fixing Concealed COCK 25 MM DIA Rate are inclusive of all 5.00 No. 1233.57 RS: One Thousand

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Two Hundred Thirty Three

Drawings, Specifications and as per the Instruction of Engineer In charge. and Paise Fifty Seven

The Model & Make of Concealed COCK Shall be as per the Approved only

Make List of GSPHCL.

108 Providing and Fixing in Position Cowel Vent to Pipes of 75 mm dia. 7.00 No. 16.47 RS: Sixteen and

Paise Forty Seven only

109 Providing and Fixing in Position Cowel Vent to Pipes of 110 mm dia. 7.00 No. 28.16 RS: Twenty Eight

and Paise Sixteen only

110 Providing and Fixing 3mm thick acrylic sheet with Vinyl letter colour-2073- 3.00 Smt 7193.89 RS: Seven Thousand

dark grey for back ground and colour-2199-white letter with required One Hundred Ninty Three

screws…etc as per required sizes complete etc as per specification & and Paise Eighty Nine

instruction as per engineer Incharge. only

111 Provinding supplying and fixing stainless steel 304 Grade letters as per 1360.00 Sq.Inch 118.20 RS: One Hundred

detail drawing and instruction of Engineer Incharge Eighteen and Paise

112 Providing and Laying G.I.Rain water spout of 50 mm Dia of required 2.00 No. 100.90 RS: One Hundred

Length. and Paise Ninty only

Description Total Qty Unit Rate Rate In Word Rs. Amount

113 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all 9.00 No. 565.51 RS: Five Hundred

matreials, Labour & Necessary Fittings etc. Complete as per 6 Detailed Sixty Five and Paise Fifty

Drawings, Specifications and as per the Instruction of Engineer In charge. One only

The Model & Make of Health Faucets Shall be as per the Approved Make

114 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 9.00 No. 990.61 RS: Nine Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Ninty and Paise Sixty One

per Detailed Drawings, Specifications and as per the Instruction of only

Engineer In charge. The Model & Make of Bib Tap Shall be as per the

Approved Make List of GSPHCL.

115 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive 9.00 No. 1309.39 RS: One Thousand

of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Three Hundred Nine and

Drawings, Specifications and as per the Instruction of Engineer In charge. Paise Thirty Nine only

The Model & Make of Two way Bib Tap Shall be as per the Approved

Make List of GSPHCL.

116 Providing a I.S.I mark 7 levers three keys brass pad lock of Navtal ( 25.00 No. 243.64 RS: Two Hundred

Godrej ) make 65mm dia on completion of project. Forty Three and Paise

Sixty Four only

117 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 870.00 Smt 188.49 RS: One Hundred

Ceilling/Slop Surface (two coats) to give an required shap even shade Eighty Eight and Paise

after throughly brushing the surface to remove all dirt and remains of loose Forty Nine only

poweder material etc. complete. Rate are inclusive of applying two coat of

lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give

and even shade including thoroughly brushing the surface free from mortar

dropping andother foreign matter and sand papered smooth. Fine Putty

primers and Plastic Emulsion Paint Shall Be Used As Per approved

Material List By G.S.P.H.C

118 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two 2195.00 Smt 176.01 RS: One Hundred

coats) to give an required shap even shade after throughly brushing the Seventy Six and Paise

surface to remove all dirt and remains of loose poweder material etc. One only

complete. Rate are inclusive of applying two coat of lapy (Putty) and one

coat of primer on new wall surface to give and even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.primers and Plastic Emulsion

Paint & Putty Shall Be Used As Per approved Material List By G.S.P.H.C

119 Finishing wall with weather proof exterior emulsion paint on wall 2008.00 Smt 147.68 RS: One Hundred

surface (two coats) over and above applying One Coat Of Primer to give Forty Seven and Paise

an required shape even shade after thoroughly brushing the surface to Sixty Eight only

remove all dirt, and remains of loose powdered materials.etc

complete.primers and exterior Emulsion Paint Shall Be Used As Per

approved Material List By G.S.P.H.C

Description Total Qty Unit Rate Rate In Word Rs. Amount

120 Providing and fixing in positon ISI marked Rotational moulded 5000.00 Litre 3.91 RS: Three and Paise

Polyethylene double layer cylindrical vertical storage tank (IS : 12701 ) Ninty One only

water tank size including making inlet and outlet. Overflow and wash out

arrangement with GI connection including using necessary M.H for

connection etc. Complete with closed cover including applying two coats of

oil pianting outside the tank etc complete.& all materials used as per

approved material List By G.S.P.H.C.L

121 Providing TMT steel (Fe - 500D) reinforcement for R.C.C. work including 70619.94 Kg 75.46 RS: Seventy Five and

cutting, bending, binding and placing in position etc. Complete for all floor. Paise Forty Six only

Brand As approved by the GSPHCL only shall be Used.

122 Providing and fixing Urinal of approved quality including connecting 5.00 No. 1026.01 RS: One Thousand Ten

the urinal with waste pipe trap and integral longitudinal flush Hundred Twenty Six and

pipe.Rate are inclusive of all matreials, Labour & Necessary Fittings Paise One only

etc. Complete as per Detailed Drawings, Specifications and as per

the Instruction of Engineer In charge. The Model & Make of urinal

Shall be as per the Approved Make List of GSPHCL.

123 Making connection of galvanised Mild steel distribution branch with 1.00 Job 1500.00 RS: One Thousand Five

galvanised mild steel main 50mm to 80mm nominal bore by providing Hundred only

and fixing tee including cutting and threading the pipes complete.

124 Providing & fixing S.W. gully trap without C.I. grating brick masonary 7.00 No. 1176.94 RS: One Thousand One

chamber & water tight C.I. Cover of size 300 mm x 300mm size with Hundred Seventy Six and

standard weight (1) square mouth trap 150mm x 100mm size "P" or "R" Paise Ninty Four only

125 Constructing brick masonry chamber for under ground C.I. inspection 14.00 No. 3793.18 RS: Three Thousand

chamber and bends with brick having crushing strength not less than 35 Seven Hundred Ninty

kg./cm2 in C.M. 1.5 R.C.C. top slab with 1:2:4 mix (1 Cement : 2 coarse Three and Paise Eighteen

sand :4 graded stone aggregate 20mm size) with 8 mm dia steel at 15 only

cm,C/C and providing & Fixing R.C.C cover size cover 0.60x0.45x0.07 met

with 40x40x5 mm angle.frame and foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cment walls & bed connect etc. complete rate inclusive of

outside plaster of 15mm thick in cm 1:3 form top of chamber and all side

up to 45 cm deep below ground level.(A) Inside dimansions

455mmx610mm.and 450 mm deep for Single or multi purpose pipe line.

Description Total Qty Unit Rate Rate In Word Rs. Amount

126 Extra over above Item No-125 for additional depth 0.10 mt. Or part there of 42.00 No. 239.99 RS: Two Hundred

beyond 450 mm depth for brick masonary chamber for 455m x 610mm Thirty Nine and Paise

size. Ninty Nine only

127 Constructing brick masonary chamber for underground C.I.Inspection 15.00 No. 5476.93 RS: Five Thousand

chamber and bends with bricks having crushing strength not less than 35 Four Hundred Seventy Six

kg/Cm2 in C.M.1:5 R.C.C. top slab with 1:2:4 mix (1-cement:2-coarse and Paise Ninty Three

sand:4-graded aggregate 20mm size ) with 8mm dia TMT steel at 15 cm only

c/c both ways and providing and fixing precast R.C.C.Cover size 0.60 x

0.45 x 0.07m with M.S. angle frame. of 40 x 40 x 5mm foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.complete

rate are also inclusive of outside plaster 15mm thick in C.M.1:3 from top of

chamber and all side upto 15cm deep below ground level.(i) Inside

dimention 600mm x 850mm and 450mm deep for multy perposed pipe

128 Extra over above Item No-127 for additional depth 0.10 mt. Or part there of 45.00 No. 322.37 RS: Three Hundred

beyond 450 mm depth for brick masonary chamber for 600mm x 850mm Twenty Two and Paise

size. Thirty Seven only

129 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 75.00 Rmt 229.00 RS: Two Hundred

SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline Twenty Nine only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight ...............

to the departmental stores etc. complete. (100mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of

pipes, sliding over the elastomeric sealing rubber ring placed on the

specified valley of the corrugation at........

lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete as

per drawing,specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction

of Engineer-in-charge PipeAs Per approved Material List By G.S.P.H.C .

Description Total Qty Unit Rate Rate In Word Rs. Amount

130 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 75.00 Rmt 396.00 RS: Three Hundred

SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline Ninty Six only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per..........

.......... EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance

to the departmental stores etc. complete. (150mm ID Dia) Including

Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of

pipes, sliding over the elastomeric sealing .........

.........rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the continuity

tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes &

fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge PipeAs Per approved Material List By G.S.P.H.C .

131 Providing & fixing Precast RCC cover for IC and MH chambers including 3.00 No. 1702.00 RS: One Thousand

MS angle frame of 40x40x5mm and CC 1:1.5:3 precast RCC cover Seven Hundred Two

including 8mm dia. TMT steel at 15 CM c/c both ways and oil painting to only

frame and handle including finishing of concrete with CM (1:3) etc

complete. Rates are inclusive of cost of angle frame, TMT steel,

reinforcement, concrete finishing work and two pieces of MS flate 25x3mm

handle finished dimention of RCC cover shall be 0.60 X 0.45 X 0.07 Mt.

132 Providing and fixing pre-cast concrete kerb stone of gray cement based 310.00 Rmt 358.06 RS: Three Hundred

concrete block 30cm length,30cm height and 15cm thick of M-250 grade Fifty Eight and Paise Six

concret as per approved design and including excavation for fixing in only

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

133 Providing and Fixing Precast Rubber Dye Interlocking Concrete block 490.00 Smt 680.10 RS: Six Hundred

60mm thick with grade of concrete M300 Puumatic compressed by Eighty and Paise Ten

Mechanically pressed and as per approved design including 75mm Sand only

layer for levelling and filling the joint with Sand in proper line and level etc.

Description Total Qty Unit Rate Rate In Word Rs. Amount

134 Providing & Fixing cast iron steps of size 500x150mmx22.5mm and 24.00 No. 201.74 RS: Two Hundred One

painting with two coats of Anti-corrosive paint etc.complete. and Paise Seventy Four

135 Providing & fixing 600mm dia loop hot dip galvanised iron concertina coil 190.00 Rmt 632.00 RS: Six Hundred

made out of 2.5mm dia wire with 22mm long razor sharp barbs at 35mm Thirty Two only

centre fitted on 40mm x 40mm x 5mm M.S angle post of required shape &

size at 3.00 mtr centre distance concertina coil shall be fixed on M.S angle

stand with the help of 4 nos RBT wire M.S angle stand shall be fixed on

top of compound wall with 15m x .15mx.4m deep block in controlled

cement concreate M-250. Rate is inclusive of applying one coat of primer

and 3 coats oil painting on M.S. angle stand shall be made as per the

drawing supplied or as directed by engineer In Charge.

136 Box cutting the road surface to proper slope and camber for making a 289.00 Cmt 103.17 RS: One Hundred

base for road work including removing ther excavated stuff and disposing Three and Paise

as on the road side slope directed upto 50Mt. lead Seventeen only

137 Rolling and Consolidation water bound macadam including watering not 1680.00 Smt 20.79 RS: Twenty and

exceeding 150 mm thickness ( Main layers including binding materials) Paise Seventy Nine only

including filling in depressions which occurs during the process ( B) with

power roller exceeding 8 tones and not exceeding 12 tones.

138 Providing,Laying and Fixing 25mm thick expansion joint by hydro cell 7.00 Smt 738.13 RS: Seven Hundred

semi-rigid UV resistance with high high performance laminated closed cell Thirty Eight and Paise

polythene foam joint filler in sheet foam as directed etc. Complete Thirteen only

139 Providing and fixing 25 mm diameter backup rod having minimum density 60.00 No. 133.14 RS: One Hundred

22 kg per cum (ASTMD - 3575) & compression strength of 0.40 kg per sqm Thirty Three and Paise

(ASTM - 5249) and finishing with polysulphide sealant etc. complete. For 20 Fourteen only

mm wide expansion joint

140 Construction Of Concrete Road Using Trimix System Having of any 135.00 Cmt 4565.56 RS: Four Thousand

Thickness M-300 Concrete Mix With Providing And Fixirs & Removing Of Five Hundred Sixty Five

"C" Channel Having Size 75Mm. X75Mm As Per Required Level Slope and Paise Fifty Six only

And Thickness Of Concrete Road Fl Levelling Of Place Concrete With

Surface Vibrator Machine, Dewatering System Device Finishing With

Power Floater Machine And Trowel Light Brooming On The Surface As

Directed With Providing Expansion Joint Size 20 X 190Mm Using Of

Concrete Cutter Machine Including Curing Etc. Complete.

141 Providing & Making cutting in C.C Road including cleaning etc. Complete 125.00 Rmt 36.80 RS: Thirty Six and

as per direction of Engineer incharge. Paise Eighty only

Description Total Qty Unit Rate Rate In Word Rs. Amount

142 providing & Fixing 25mm Dia backup rod of having minimum density 70.00 Rmt 17.48 RS: Seventeen and

22KG per Cum(ASTMD-3575) & Compression strength of 0.40 kg per sqm Paise Forty Eight only

(ASTM- 5249) and finishing with polysulphide etc. For 25mm wide

Expansion joint.

143 Providingand laying Two level or slopes) and jointing reiforced concrete 60.00 Rmt 237.83 RS: Two Hundred

light duty, non pressure pipes I.S.Class NP-2 of the following diameter with Thirty Seven and Paise

collars and butt ends prepared for collar joints, including testing of pipes Eighty Three only

and joints etc. complete. (E) 150 mm. Dia.

144 Supplying of Graded hand Broken stone aggregate for WBM Road of size 46.00 Cmt 1034.68 RS: One Thousand Ten

40mm to 63mm including conveyance charges for any lead and lift. Hundred Thirty Four and

Paise Sixty Eight only

145 Spreading of graded hand broken stone aggregate for Soiling WBM road 46.00 Cmt 247.28 RS: Two Hundred

of size 40 mm to 63 mm. Forty Seven and Paise

Twenty Eight only

146 Supplying of Graded hand Broken stone aggregate for WBM Road of size 46.00 Cmt 991.93 RS: Nine Hundred

25mm to 50mm including conveyance charges for any lead and lift. Ninty One and Paise Ninty

147 Spreading of graded hand broken stone aggregate for Soiling WBM road 46.00 Cmt 247.28 RS: Two Hundred

of size 25 mm to 50 mm. Forty Seven and Paise

Twenty Eight only

148 Supplying of murram for binding material on WBM road of including 15.00 Cmt 305.80 RS: Three Hundred

conveyance charges for any lead and lift. Five and Paise Eighty

149 Spreading blindage or road crust filling the gaps in metal and levelling to 15.00 Cmt 146.01 RS: One Hundred

gradient & Camber as directed.(i) Murrum Forty Six and Paise One

150 Providing, Supplying & Laying Granular Sub Base (GSB) by 56.00 Cmt 1386.84 RS: One Thousand

providing M.C. coarse graded material, spreading in uniform layers Three Hundred Eighty Six

with motor grader on prepared surface, mixing by mix in place and Paise Eighty Four

method with rotavator at OMC and compacting with vibratory roller only

to achieve the desired density complete as per MORTH

151 Providing Pre-Moulded asphalt filler joint as per drawing (A) 12mm 1.50 Smt 695.17 RS: Six Hundred Ninty

Five and Paise Seventeen

Description Total Qty Unit Rate Rate In Word Rs. Amount

152 Providing and fixing premoulded compressible filler board in black 2.50 Smt 788.78 RS: Seven Hundred

colour confirming to MoRT&H Specifications (Clause 1015), having Eighty Eight and Paise

minimum density 95kg/cum, non-staining with less than 1% water Seventy Eight only

absorption & compression recovery of 93% minimum as per

specification for 20 mm wide expansion joint including cutting to

required size and shape at all levels etc.complete as directed.

153 providing and corrogulated JSW pre coated sheet roofing fixed withh 165.00 Smt 1015.76 RS: One Thousand Ten

galvanised iron J or L hooks, bolts and Nuts 8 mm dia with bitumin and Hundred Fifteen and Paise

G.I. Limpet washer or G.I. limpet washer with white lead complete Seventy Six only

excluding the cost of Purlines , rafters and trusses(0.60mm thick)

154 Drilling of pilot bore hole in all strata by mud flush DR rig 250 mm 100.00 Rmt 749.00 RS: Seven Hundred

diameter with lowering of pipes, including jointing, Forty Nine only

welding etc. labour of cement slurry, sand and gravel packing and

development of bore with air compressor of required capacity vertically etc.

complete bore shall stand up un-ceased at least 71 hours complete.

155 Reaming of 250 mm diameter pilot bore including assembling, lowering, 100.00 Rmt 461.00 RS: Four Hundred

housing, casing stainer pipes with gravel packing, clay packing etc. 550 Sixty One only

156 Manufacture, supply and delivery of ISI marked ERW M.S. pipes 100.00 Rmt 2407.00 RS: Two Thousand

conforming to IS: 4270/2001 with latest amendment Four Hundred Seven

Rates are exclusive of GST only

157 Steel bent plate suitable to 250 mm diameter ERW pipes 50.00 No. 90.80 RS: Ninty and Paise

etc. size 200 X 150 X 6 mm etc. complete. Eighty only

158 Supplying of Gravel selected size 4mm to 6 mm size at site of work etc. 5.00 Cmt 2029.00 RS: Two Thousand

complete Twenty Nine only

159 Supplying of Portland cement at store or site of work including all taxes, 2.00 M.T 6302.00 RS: Six Thousand

loading, unloading, carting insurance etc. complete Three Hundred Two

160 Supply of Clamps made from M.S. plate with three holes on either sides 1.00 Pair 2017.73 RS: Two Thousand

with bolts and nuts and washers of standard and approved make size Seventeen and Paise

900mm X 100mm X 16 mm flat suitable for 250mm diameter pipes etc. Seventy Three only

161 Supply of M.S. Bail plug having length of 0.45 m from medium class pipe 1.00 No. 1054.48 RS: One Thousand Ten

suitable for 250 mm diameter pipes etc. complete. Hundred Fifty Four and

Paise Forty Eight only

Description Total Qty Unit Rate Rate In Word Rs. Amount

162 Supply of Bore Plug having 100 mm height made fromM.S. plate with 1.00 No. 1150.12 RS: One Thousand One

three holes at equal distance on circumferences for nuts, bolts type locking Hundred Fifty and Paise

arrangements of standard make suitable for 250 mm internal diameter Twelve only

pipes etc. complete.

163 Cement Sealing by means of mud pumps without cost of Cement etc. 1.00 Job 13273.00 RS: Thirteen Thousand

complete. Two Hundred Seventy

164 Supply of Clay balls size of 25mm to 35 mm diameter made from sticky 5.00 Cmt 751.00 RS: Seven Hundred

clay etc. complete Fifty One only

165 Development of each water bearing zone coming across up to the depth 1.00 Job 27777.00 RS: Twenty Seven

of bore well ( tube well ) of by lowering 100 mm diameter drop line and 32 Thousand Seven Hundred

mm diameter G.I. air line for each zone with suitable capacity Air Seventy Seven only

Compressor up to availability of sand free discharges

166 Electro logging of bore as directed by the Engineer - in -charge etc. 1.00 Hr 12000.00 RS: Twelve Thousand

167 Charges of Air Compressor capacity of 900CFM 200PSI etc. complete 1.00 Hr 27330.00 RS: Twenty Seven

for 6.00 hours job etc. complete Thousand Three Hundred

168 Pumping test of the tube well by 70.00 H.P. submersible pump test with 1.00 Job 36607.00 RS: Thirty Six

D.G. set for 72 hours etc. complete. Thousand Six Hundred

169 Geophysical survey for pin point for bore well including survey done by 1.00 Job 14286.00 RS: Fourteen

GSSWB department with ralay repail of pin point location including fees to Thousand Two Hundred

GSSWB department & Transporatation charges.. Eighty Six only

170 Making connection of galvanised Mild steel distribution branch with 1.00 Job 878.85 RS: Eight Hundred

galvanised mild steel main 50mm to 80mm nominal bore by providing and Seventy Eight and Paise

fixing tee including cutting and threading the pipes complete. Eighty Five only

171 Providing & Laying Lawn for Land Scapping including Watering the lawns 125.00 Smt 150.00 RS: One Hundred Fifty

and all labours. only

172 Providing & laying & fixing Tree Plant of various plants such as plantation 75.00 No. 600.00 RS: Six Hundred

rate are also inclusive of Maintaining the plant in give Condition at the time only

of Completion including Tree guard etc. Complete

Description Total Qty Unit Rate Rate In Word Rs. Amount

173 Providing, laying, testing and commissioning of 'C' class heavy duty MS 16.00 Rmt 2581.50 RS: Two Thousand

pipe confirming to IS 3589/IS 1239 including welding, fittings like elbows, Five Hundred Eighty One

tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes on and Paise Fifty only

wall/ceiling with suitable clamps/support frame and painting with 2 or more

coats of synthetic enamle paint of required shade complete as required.

The work includes makingholes in brick or RCC walls, slabs/ roofs and

making good the damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of approved

shade (Post office red) of enamelpaint over a coat of approved primer..

174 Providing, laying, testing and commissioning of 'C' class heavy duty MS 3.00 Rmt 1910.39 RS: One Thousand

pipe confirming to IS 3589/IS 1239 including welding, fittings like elbows, Nine Hundred Ten and

tees, flanges, tappers, nuts, bolts, gaskets etc and fixing the pipes on Paise Thirty Nine only

wall/ceiling with suitable clamps/support frame and painting with 2 or more

coats of synthetic enamle paint of required shade complete as required.

The work includes makingholes in brick or RCC walls, slabs/ roofs and

making good the damages by bringing to the original condition to the

satisfaction of the Engineer in charge, painting two coats of approved

shade (Post office red) of enamelpaint over a coat of approved primer.. (80

175 Supply and installation,testing and commisioning of Butterfly valves of PN 2.00 No. 6101.15 RS: Six Thousand One

1.6 ratings with bronze/gunmetal seat duly ISI marked complete with nuts, Hundred One and Paise

bolts, washers, gaskets confirming to IS 13095 of following sizes as Fifteen only

required: (B) 100 mm dia

176 Providing, installing testing & commissioning of non-return valve of 2.00 No. 9945.68 RS: Nine Thousand

following sizes confirming to IS 5312 complete with rubber gasket, GI Nine Hundred Forty Five

bolts, nuts, washers etc. as required. (B) 100 mm dia and Paise Sixty Eight

177 Supplying, fixing single headed internal hydrant valve with instaneousbgun 4.00 Set 6886.72 RS: Six Thousand

metal/stainless stell coupling of 63mm dia with cast iron wheel ISI marked Eight Hundred Eighty Six

confirming to IS 5290 (type A) withy blank gun metal/ stainless steel cap and Paise Seventy Two

and chain as required (a)single headed Gun Metal only

178 Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A of 15 4.00 No. 2854.62 RS: Two Thousand

mtr. standard length of approved pattern and size including gun metal Eight Hundred Fifty Four

male and female Coupling Gun Metal Only and Paise Sixty Two only

179 Providing & fixing 63mm dia 15 m long RRL hose pipe with 63mm dia 4.00 Set 3916.23 RS: Three Thousand

male and femal couplings duly bound with GI wires, revates etc. Nine Hundred Sixteen and

confirming to IS 636 (typa-A) as required Paise Twenty Three only

Stainless steel (grade 304)

Description Total Qty Unit Rate Rate In Word Rs. Amount

180 Fire Hose Cabinet (size 600x 450 x 250mm) Providing, Fixing, Testing, & 4.00 No. 3453.00 RS: Three Thousand

Commissioning of weather proof standard fire hose cabinet stand Four Hundred Fifty Three

mounting type having single opening with M.S. Fabricate stand, cabinet only

make with min 18 gauge MS sheet. Necessary locking arrangements .

Rates are inclusive of all taxes.

181 Supplying and fixing first-aid Hose Reel with MS construction spray 4.00 No. 7920.84 RS: Seven Thousand

painted in post office red, confirming to IS 884 complete with the following Nine Hundred Twenty and

as required.25 mm nominal int. dia. Water hose thermoplastic (Textile Paise Eighty Four only

reinforced) type-2 as per IS12585 25 mm nominal internal dia gun metal

globe valve and nozzle.

Drum and brackets for fixing the equipment of the wall. Connections from

risers with 32 mm dia stop gun metal valve & MS pipe and socket.

182 Supply, Installation, Testing & commissioning of 25mm dia gun metal ISI 4.00 No. 608.08 RS: Six Hundred Eight

mark Gate Valve with 25mm dia nipple as complete as directed. and Paise Eight only

183 Design Supply and installation of safety sinages made of Zince sulphied 896.00 Sq.Inch 7.95 RS: Seven and Paise

base glow in the Dark Rigid Sheet with high luminiues properties inclusing Ninty Five only

transparent weather proof U/V stabilized plastic pasted on 2mm, 3mm

thick clear acrylic sheet Emergency exit Do not use Lift in Case of Fire

Floor Marking fire lift stair Exit hydrant point fire extinguisher Fire Alarm,

184 Getting provisional NOC and Final NOC and Renewal of NOC (During 1.00 Job 16950.00 RS: Sixteen Thousand

Defect Liability Period) for Fire Hydrant,Sprinkler system, Fire Nine Hundred Fifty

Extinguisher, Fire alarm system etc. from local fire authority or any other only

relevant statutory authority at initial stage and required various other

stages of construction work, including preparation of reports/drawings as

per fire authority requirement. Rate also includes renewal of Fire NOC

during defectliability........

............ period as per requirement. Main agency has to give demonstration

of all fire system to fire officer police / concern beneficiaries & GSPHCL.

Agencyhas to submit FDR of approved bank as per clause 2.0, section

of Rs 20000.00 Or Quoted rate which ever is higher to GSPHCL for

minimum maturitperiod of Four yearsin favour of GSPHC, which will be

released after Successful Submitting of All Fire NOC

atthecompletionofdefectliabilityperiod.Renewal Fire .N.O.C. shall be

submitted final S.D.proposal.Agency hasto bornecharges like...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

........... preparing and submission of allthe

documents,Photographs,CD/DVDrequired togetthe N.O.C. from concern

fire department and also liaisoning work with concern departments. Main

civil agency has to get the pre-NOC from fire & emergency department

well beforestarting civil & the fire hydrant work including sump &

pumproom work. For that professional & experience fire agency has to

prepare drawing of fire hydrant system, sprinkler system, fire alarm

system, DGset etc. as per tender item and making floor layout of all fire

pump panel, cable earthing etc in pump room. If any changes

required...........

............... in drawings of sump & pump room. Main agency has to inform in

written before excavation of pump & sump room. Agency has to calculate

the total head & discharge required as per NBC/local fire office

requirement and as per sitesituation and submit fire pump OEM

specification curve foundation detail etc & get approval of cable, panel

drawings & specification. After completion of fire hydraunt related work as

per pre-NOC, tender specification & drawing approved by fire department,

.............agency has to do site visit with fire department & give the testing &

demonstration to fire officer & get the final NOC before handing over of the

building. Agency has to give live testing & demonstration of all system to

GSPHCL & police department jointly. For fire NOC fee separate item is

taken in tender. Agency has to quote the rate as per latest Gazettein

respective tender item.

Total Civil Amount(A)

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 150.00 Point 605.00 RS: Six Hundred Five

X 1.5 sq. mm copper PVC insulted FRLS-H wire with 1.5 sq. mm only

(green) copper PVC insulated FRLS-H wire for earth continuity in

FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive

185A solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC

pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make

5/6 Amp. ISI mark modular type switch.............

Description Total Qty Unit Rate Rate In Word Rs. Amount

............... and accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules erected

flushed with wall / ceiling with necessary modular lamp holder /

modular ceiling rose / HD Connector 75 mm deep GI box as per

requirement ( make & model approved by EIC and matching colour

with switches accessories) as directed for concealed wiring. Light

point. Cat.-III.(Conductor resistance should be as per IS:8130/1984 )

Necessary sheet cover must be erected on all ...........

...............box to prevent mortar going into the box.& for ceiling light

Point use deep Junction box of same PVC Pipe make . Length of

point wiring must not increase than 10 mtr. For that necessary

switch boards and their locations must be finalised before execution

by agency otherwise payment will not be done for extra long point.

(For future extention, if required, agency has to erect one higher

size metal box and modular plate as per instruction of EIC. ........

.............Cost of blank plate shall be paid as per tender item) [Wire

must be having box packing][This item include

cleaning(inside/outside) of all GI switch boards,electric point

box,fan box & box cutting plaster arround modular plate without

any gap] (Light Point Cat-III)

Secondary Point (Cat-III) 30.00 point 208.00 RS: Two Hundred Eight

For Bell Point, Cat.-III 10.00 Point 605.00 RS: Six Hundred Five

For Fan Point (with 6 A. Modular type switch and two module 50.00 Point 842.00 RS: Eight Hundred Forty

185D hum free EME Rotary Five step type electronic fan regulator both Two only

having ISI mark) Cat.-III

For separate Point (with 6 Amp. Switch & 3/5 pin socket both 30.00 Point 636.00 RS: Six Hundred Thirty Six

having ISI mark) Cat.-III only

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket 70.00 Point 306.00 RS: Three Hundred Six

both having ISI mark) Cat.-III only

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and erecting Medium Class FIA approved and ISI mark 1500.00 Mtr. 24.00 RS: Twenty Four only

white colour (embossed) RIGID PVC PIPES of following size

complete erected with necessary PVC fittings & Junction boxes fixed

186A with adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. 20 mm. dia.

For 25 mm. dia. 1000.00 Mtr. 33.00 RS: Thirty Three only

Providing & Erecting Mains with approved make FRLS-H PVC 1500.00 Mtr. 81.00 RS: Eighty One only

Insulated wire ISI marked 1.1 KV grade with FIA approved ISI

mark medium class 20/25/32 mm dia. embossed rigid PVC pipe

187A with same company PVC fitting fixed with adhesive solution to be

erected on/in brick wall / slab along with continuous G. I. fish wire

to draw mains Zari work & plastering by cement mortar ..........

.............& finishing the surface to match the wall / ceiling complete

(Conductor resistance should be as per IS:8130/1984 ) [a] 2 x

sq.mm. FRLS-H copper multi stranded conductor mains with

sq.mm. FRLS-H copper multi stranded conductor for earthing as

per standard colour code. (with 20 mm dia. PVC pipe) [Wire must

be having box packing]

For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains 600.00 Mtr. 108.00 RS: One Hundred Eight

with 1.5 sq.mm. FRLS-H copper multi stranded conductor for only

earthing as per standard colour code. (with 20/25 mm dia. PVC

pipe as per requirement) [Wire must be having box packing]

(Conductor resistance should be as per IS:8130/1984 )

For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains 200.00 Mtr. 145.00 RS: One Hundred Forty

with 2.5 sq.mm. FRLS-H copper multi stranded conductor for Five only

earthing as per standard colour code. (with 20/25 mm dia. PVC

pipe as per requirement) [Wire must be having box packing]

(Conductor resistance should be as per IS:8130/1984 )

Description Total Qty Unit Rate Rate In Word Rs. Amount

For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains 450.00 Mtr. 192.00 RS: One Hundred Ninty

with 2.5 sq.mm. FRLS-H copper multi stranded conductor for Two only

earthing as per standard colour code. (with 25 mm dia. PVC pipe as

per requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated 100.00 Mtr. 37.00 RS: Thirty Seven only

188 Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts

etc. complete of following sizes.

Providing and erecting Plug Point wiring with 1.1 KV grade ISI 20.00 Point 930.00 RS: Nine Hundred Thirty

marked approved make 2 x 2.5 sq.mm copper PVC insulated FRLS- only

H wire with 1.5 sq.mm (green) copper PVC insulated FRLS-H wire

for earth continuity in FIA approved ISI mark white colour

medium class 20/25 mm dia. rigid PVC pipe with same band PVC

fitting fixed with adhesive solution erected in brick wall/slab along

with continuous G. I. fish wire to draw wires and make plaster zari

for PVC pipe & boxes shall be filled with cement mortar &

189 finishing the surface to match the wall / ceiling complete with

Amp Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall. (a) 16 Amp. indicator

switch & 1 No. 6/16 A universal socket white colour suitable for

pin top duly both having ISI mark. (Necessary Sheet Must Be

Erected On All Box To Prevent Mortor Going In To The Box) Cat.-

Providing and erecting Plug Point wiring with approved ISI 20.00 Point 1087.00 RS: One Thousand Ten

marked 1.1 kv grade 2 x 4.00 sq.mm copper PVC insulated FRLS-H Hundred Eighty Seven only

wire with 2.5 sq.mm (green) copper PVC insulated FRLS-H wire for

190 earth continuity in FIA approved ISI mark white colour medium

class 20/25 mm dia. igid PVC pipe with same band PVC fitting

fixed with adhesive solution erected on/in brick wall /...........

...............slab along with continuous G.I. fish wire to draw wires and

make plaster zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the brick wall / ceiling

complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with

Description Total Qty Unit Rate Rate In Word Rs. Amount

............appropriate front plate modules erected flushed with wall.

(a) 16 Amp. indicator switch & 1 No. 16 Amp. universal socket

white colour suitable for 3 pin top duly. Cat.-III (Necessary Sheet

Must Be Erected On All Box To Prevent Mortor Going In To The

Box)(AC/Gyser point)

Providing following type of Modular Type Accessories mounted 5.00 Each 159.00 RS: One Hundred Fifty

with 20 G company fabricated metalic box, single mounting base Nine only

frame covered with textured / metallic front plate, modules erected

with necessary connection. As desired by Engineer in charge. a) TV

Co-axial Socket outlet. Cat.-III

Two pin / RJ-11Telephone Socket (For One Gang) Cat III 10.00 Each 159.00 RS: One Hundred Fifty

Blank Plate Single. Cat.-III 511.00 Each 25.00 RS: Twenty Five only

Modem Jack for Computer Open RJ-45 Cat III 20.00 Each 159.00 RS: One Hundred Fifty

16Amp. Universal socket. Cat.-III (For AC Points) 10.00 Each 198.00 RS: One Hundred Ninty

16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete 10.00 Each 493.00 RS: Four Hundred Ninty

Cat.-III Three only

Modular indicating call bell Cat.-III 5.00 Each 326.00 RS: Three Hundred Twenty

Modular Buzzer Cat.-III 5.00 Each 148.00 RS: One Hundred Forty

Providing & erecting Switch board for Computer or electric 20.00 Each 1122.00 RS: One Thousand One

apparatus consisting of following items in single board erected on Hundred Twenty Two only

Metal board erected as directed. 1 no. 6/16 Amp. universal Socket,

1 nos. 16 Amp. indicator switch, 3 nos. 6 Amp. Switch & 3 nos.

Amp. 5 pin Plug.

For Computer power Supply board. Cat. III

Providing and erecting modular type accessories mounted on 20G 5.00 Each 629.00 RS: Six Hundred Twenty

G.I. company fabricated galvanised metal box covered with Nine only

193 approriate front plate modules erected flushed with wall/Ceiling

with 1 Nos. of 16 Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin plug.

[For TV Switch board] Cat III

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and Erecting following size of TV Co-axial flexible cable 250.00 Mtr. 39.00 RS: Thirty Nine only

comprising inner conductor of solid bare copper insulated with

Foam PE & Secondary conductor made of poly – Aluminium film

bonded Al. Braids @ coverage of 65% overall sheated with black

PVC insulation a. RG-6

Providing & Erecting 2.0 mtr long Earthing system by making 8.00 Each 6000.00 RS: Six Thousand only

minimum bore of 225 mm dia in soft soil. Suitable for pipe-in-pipe

technology earthing.Earth electric rod must be made from

Corrosion free Hot dip galvanizing pipes having following

195A specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B

Class ISI mark reputed Brand Terminal Size: 70mm X 100mm

..............Terminal Should be made from inner pipe for that pipe

must be pressed and give rectangular shape so its work as a

terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any

where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole

must be.........

............... provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%

(C) Back fill Compound ........

............. :-Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg. Necessary

test report must be submitted.

Description Total Qty Unit Rate Rate In Word Rs. Amount

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of

{Make & Model to be approved by EIC) OEM has to submit all

detail & sample for approved before supplying } Water must be

poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance

to at least 02 ohms & voltage between neutral &Earthingupto

volt. Agency has to maintain earthing& its value for one year. If

required. Earthing must be done in the presence of A.E.

Providing and fixing heavy-duty earthing inspection chamber : 8.00 Each 1025.00 RS: One Thousand Twenty

heavy duty PVC/CC/Brick masonary should be size of Five only

195B 400mmX400mmX400mm depth and Cover should be heavy duty

cast iron with required size of 300mmX300mmX4mm thick.

For above earthing additional charges for boring in hard rock soil 8.00 Each 325.00 RS: Three Hundred Twenty

196C (by breaker) & filling soft soil in earth pit (certificate for soil have to Five only

given by DEE / AE along with photographs)

Supplying and erecting 8 W LED lamps with following wattage 20.00 Each 111.00 RS: One Hundred Eleven

capacity of 220 to 240 voltage, minimum 15000 burning hours life, only

500 V in built surge protection,Polycarbonate diffuser, mounting

196 suitable for E14 / E27 / B22 lamp holders, pf greater thanequal to

0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

Supplying and Erecting LED indoor fitting having 1100mm long 30.00 Each 370.00 RS: Three Hundred Seventy

with LED of wattage Mashroom shape 0.2W to 0.5W assemble on only

single MCPCB with housing use as a heat sink shall be made from

197 white powder coating Aluminum extrusion having enough strength

(sample must be approved by EIC)with polycarbonate diffuser with

following specification:................

Description Total Qty Unit Rate Rate In Word Rs. Amount

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV(N) IP rating: IP

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing Clamp min.12mm wide heavy duty design & strength

should be sufficient to hold the fitting erected on wall or ceiling

(R) 3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 80.00 Each 1159.00 RS: One Thousand One

Cool/Natural white/Warm (6K/4K) white Color back lit LED Hundred Fifty Nine only

Down lighter with BIS approved separate potted driver with single

piece pressure die cast aluminium alloy housing (no plastic part

allowed) with corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete......................

Description Total Qty Unit Rate Rate In Word Rs. Amount

................. (LED from Philips Lumileds, CREE, Nichia, Bridgelux,

Seoul & Osram) CRI > 80, CCT 6K/4K. The LED's should be

mounted on back lit metal core PCB for better heat conduction and

long life of LED. Test report of shall be submitted (LM 79 for

complete fixture, for individual LED). The Fixture have protection

like miswiring, over voltage, over load , IP20 wrong wiring, THD <

15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%.

For 24 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ

@ 240V, 4 KV surge protection.................

The fixure must have min. 2400 lumen light output. The fixture

should be provided with external separate Potted driver, latest

Valid BIS approved Luminaire and driver. The Fixture efficiency ≥

90 lumens/watt only for safety and performance. (L70 @

Hrs.) The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, IK test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replacement

Guarantee for complete Fixture

SITC of Indoor Commercial Recess / Surface mounted (IP20) 50.00 Each 1027.00 RS: One Thousand Twenty

maximum 18 W Cool/Natural white/Warm white Color LED Seven only

Down lighter office Lighting Luminaire with separate potted driver

199 with single piece pressure die cast aluminium alloy housing with

corrosion resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED

complete ................

Description Total Qty Unit Rate Rate In Word Rs. Amount

...............(LED approx.6K/4K from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K

bin). The LED's should be mounted on back lit metal core PCB for

better heat conduction and long life of LED. The Fixture should

comply all International Standarad third party (LM 79 for complete

fixture, LM80 for individual LED). The Fixture have protection like

miswiring, over voltage, over load, wrong wiring, THD < 15%,, P.F

> 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%. For 18 W

fixture wide voltage range from 180 V to 270 V, 50/60 HZ @ 240V

application, 4 KV surge protection................

The fixure must have min. 1800 lumen light output. The fixture

should be provided with external separate Potted driver, latest

Valid BIS approved Luminaire and driver. The Fixture efficiency ≥

90 lumens/watt only for safety and performance. (L70 @

Hrs.) The fixture should be able to easily mount on POP / Grid false

ceiling. The Luminiare should be tested as per IP 20 and following

test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test,

Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5yrs. free replacement

Guarantee for complete Fixture

SITC of Indoor Commercial Recess / Surface mounted (IP20) 45 W 5.00 Each 2071.00 RS: Two Thousand Seventy

Cool/Warm white Color LED Down lighter office Lighting Luminaire with One only

separate potted driver with single piece pressure die cast aluminium alloy

housing with corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with high brightness

LED complete.............

Description Total Qty Unit Rate Rate In Word Rs. Amount

............. (only from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul &

Osram) CRI > 80, CCT 5600K (5400 to 5800K bin). The LED's should be

mounted on back lit metal core PCB for better heat conduction and long

life of LED. The Fixture should comply all International Standarad third

party (LM 79 for complete fixture, LM80 for individual LED). The Fixture

have protection like miswiring, over voltage, over load, wrong wiring, THD

< 15%,, P.F > 0.95, efficiency ≥ 90 lm/w & driver efficiency > 85%. For

W fixture wide voltage range from 160 V to 270 V, 50/60 HZ @ 240V

application, 4 KV surge protection.................

The fixure must have min. 4050 lumen light output. The fixture should be

provided with external separate Potted driver, latest Valid BIS approved

Luminaire and driver. The Fixture efficiency ≥ 90 lumens/watt only for

safety and performance. (L70 @ 30,000 Hrs.) The fixture should be able to

easily mount on POP / Grid false ceiling. The Luminiare should be tested

as per IP 20 and following test reports should be submitted at the time of

approval: heat resistant test, thermal test, Ingress protection test, drop

test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel partner of

the manufacturer has to submit 4 yrs. free replacement Guarantee for

complete Fixture

Providing and erecting max. 10 watt LED battern having main 5.00 Each 309.00 RS: Three Hundred Nine

housing having powder coated aluminium extruded & mashroom only

shape polycarbonate diffuser. Electrically & photomatry parameters

are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95,

system luments min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤

15%, delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70,

201 Electronic CC driver, 3 core insulated copper wire for internal

wiring, IP20, operating voltage: 160 to 270 V, Surge - 2 KV, Fixing

Clamp min.12mm wide heavy duty design & strength should be

sufficient to hold the fitting erected on wall or ceiling,Length of

fitting should be min.600mm,3 core x 0.5 Sqmm copper wire with

min. 1ft (300mm) & earthing connector.

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and erecting Polycarbonet body surface mounting LED 5.00 Each 780.00 RS: Seven Hundred Eighty

Bulk head type 9 watt Lighting Fitting with electronic driver having only

THD less than 15%, CRIgreater than80, P.F.0.95 And lumen output

from luminaire 720 lm, input voltage range 160 270 V AC, 50 Hz

cool white (3000 to 6500 k), inbuilt driver having efficiency greater

thanequal to80lm/w, 20 deg C to + 60 deg C working temperature,

AL frame with Beam Angle 120 deg.

supplying & erecting 30 W LED POST TOP LATTERN fitting with 5.00 Each 3444.00 RS: Three Thousand Four

high power white LEDs wattage of 1 ww and above assebled on Hundred Forty Four only

single MCPCB's effiency more than 130 lumens per watt and

corrosion free high pressure diecast alluminium housing with

smooth finish powder caoted and heat sink extruded alluminium

203 with difuser and poly carbonate optics/ lences with compny mark

/ name /engraved or embossed 120 to 300 volt, power factor more

than 0.95, THD < 10%, CCT 5000K to 5700K , Uniformity ratio >

0.45, Luminure efficency Min 110 lumens per watt.................

.................... LED Driver efficency > 85%. Cree/osram/philips

Lumileds/Nichia /Seoul/Bridge Lux (USA) make LED used for

luminare ( Each Fitting required LM 79 and LM-80 certificates) (B)

Flood Light(IP-65)Surge-10KV.(E)Post Top Latern LED Fitting

Comprises of 650 MM TOP diameter 120 degree beam angle with

Nos supporting ribs proposed for garden & Promenade. maximum

40 WATT, (Note:- The manufacturer/authorized Channel partner

of the manufacturer has to submit 4yrs free replcement Guarantee

for complete Fixture)

Supply, Installation, Testing and Commissioning of 1200mm sweep, 50.00 Each 2603.00 RS: Two Thousand Six

BEE 5 Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Hundred Three only

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium

204 blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not less than 0.9, Service Value (CMM/W)

minimum 7.5, Air delivery minimum 220 CMM, Minimum

RPM,230v (tolerance as per IS : 374 2019), THD less than

Description Total Qty Unit Rate Rate In Word Rs. Amount

................ compitible with electronic regulator unit for Five Speed

Control and all remaining accessories including safety pin, nut

bolts, washers, temperature rise equal to 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.Down road: up to 1.0 mtr as per

site requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj

Energos 28 & Crompton make & model approved by EIC suject to

above specification )

Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded 55.00 Each 125.00 RS: One Hundred Twenty

to the RCC bars up to 50 mm Length each side & piereced through Five only

205 16 Gauge G.I Box having 125 mm dia & depth of 75 mm complete

erected concealed in ceiling with necessary modular type Round

Supplying and erecting approved make oscillating type bracket fan 5.00 Each 2509.00 RS: Two Thousand Five

A.C. 230 V. 50 cy/s 400/450 mm sweep wall mounted with height Hundred Nine only

206 adjustment and rotary tilting device complete with guard, flexible

Core plug top complete erected with lead wires as directed. Cat II

Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe 60.00 Rn. Mtr. 107.00 RS: One Hundred Seven

/M.S. Pipe down rod erected duly painted for fan complete with only

necessary 24/0.2 flat 3 core flexible cable with earthing.The Down

rod thickness,hole,locking arrangement,construction,power

coating,colour shed should be match as original down rod brought

207 with ceiling fan.For that agency has to give original down road

sample to fabricator and one sample down rod should be approved

with EIC .After approval given by EIC agency can use the down rod

as per approved sample.If without approval down rod will be erect

on site,agency has to replace them with own cost.(No vibration or

wobbling of fan while rotating)

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supplying & erecting approved make 200mm sweep low noise 10.00 Each 1687.00 RS: One Thousand Six

decorative exhaust fan having Aerodynamically designed & Hundred Eighty Seven only

Blanced Blade, Blade finish Opaque,body colour White , finish

Glossy , Rated Speed 1800 revolution per minute ,air delivery

208 500m³ / hr , noise level 50 dB , Power Consumption 35 W, ,Rated

Voltage 230 V , no. of blades 7 , guard 18 Louvers , square frame

ABS body with inbuilt lowers & square frame.( Havell's Make

Ventilair LX or Bajaj, Usha, Crompton & Equivalent Model

Approved by EIC subject to Above Specification )

Supplying & erecting single phase approved make industrial 2.00 Each 3052.00 RS: Three Thousand Fifty

exhaust fan suitable for medium duty ring mounted low noise Two only

operation suitable for medium duty with metalic gril having

following dia size and maximum speed in RPM For 305 mm dia.

900 RPM (Make & Model Approved by EIC subject to Above

Specification )

Providing & Erecting Decorative Dig Dong bell Stereo type 250 5.00 Each 170.00 RS: One Hundred Seventy

Volt complete erected on existing polished wooden block or in M.S. only

210 box with 3mm thick white ISI mark laminated sheet. (Anchor-

Chime model,Rider,Vision,GM modular)

Supplying and erecting M.S./G.I. metal box having 16 Gauge 1000.00 Sq. Inch 5.94 RS: Five and Paise Ninty

painted with red oxide be concealed in wall with necessary Four only

plastering & finishing with 3 mm thick laminated sheet with

grooving as directed of following depth 3" depth.

Desiging,fabricating,testing electrical panel (switch board) at 3.00 Sq. Mtr. 21500.00 RS: Twenty One Thousand

manufacuturer's workshop and Providing & erecting at site. Panel Five Hundred only

should be weather proof, dust & vermin proof, floor mounted front

operated cubical panel board having IP-54 made from 2 mm. thick

212 CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick

CRCA M.S. sheet for internal partitions with necessary supporting

angles, flats including skirting, bending, drilling, welding, riveting

with internal partitions & cable alley,rubber gromets, rib, control

wires, backelite control fuses as per requirements,.................

Description Total Qty Unit Rate Rate In Word Rs. Amount

..............sufficient nos. of hinges for doors, door locking

arrangement, rubber gasket complete with Required Nos. heavy

Duty Connector with Cadmium plated nut and bolt for Anti rusting

and Al.busbar for earth, nuts/bolts,washer etc as per instruction of

engineer-In-Charge. Cost of supplied item like switchgears, LED

indicator ,CTs , busbars and PVC FRLS copper wire with suitable

size for power interconnection,measuring instruments, foundation

flange-bolts-base plates, cost of C channel/angle iron stand (1ft to

2ft height as per cable size)shall be excluded of panel

fabrication.Specification of suppiled items is attached seperatly.

which shall be carried out before applying painting, painted with

powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse,

meters etc. The dimension shall be measured excluding base

beams.switchgear of approved brand and specification shall be

used and erected at CPRI approved panel manufacturers only.

Busbar compartment must be separate for easy termination of

tails/cables and to avoid least distance of punching holes in busbar.

Panel depth shall be 350 mm.

Panel manufacturer have to give 4 years service support if in case of

breakdown or fault. Panel manufacturer have to submit electrical

meter calibration report. Agency should design the panel in such a

way that there should not be any excess in panel area (sq.mtr) &

length of bus-bar (mtr), if any excess is need to be done agnecy has

to draw attention to GSPHCL at the time of approval of G.A.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the

Description Total Qty Unit Rate Rate In Word Rs. Amount

Size of door and Ele. room / Pump room shall be measure and

provide to panel manufacturer to prepare GA drawing considering

the size of electrical room/pump room door and also inside size of

it. Agnecy has to co-ordinate with civil agency for giving proper

dimenssion of electrical room/pump room to accomodeted panel

easily.[Including Necessary numbering / marking on PANEL done

with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC

on site as per requirement] (See attached details specification of

panel & manufacture also while quoting rate. [Manufacturer must

be of Gujarat state so three stage inspection can be done if required

and service support]

Supplying and erecting tripple pole & neutral 440V / 500 V Panel 2.00 Rn. mtr. 3171.00 RS: Three Thousand One

mounting Copper Busbars with four equal Nos. of electrolyte bus Hundred Seventy One only

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wraped with colour insulating

tape for phase sequence of following current carrying capacity,

213A erected with necessary bus bar supports / insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

connections.For electrolyte copper busbars Suitable for 200 Amp.

capacity having cross section area not less than 150 sq. mm

Suitable for 300 Amp. capacity 1.00 Rn. mtr. 4861.00 RS: Four Thousand Eight

Hundred Sixty One only

Suitable for 100 Amp. capacity 2.00 Rn. mtr. 1942.00 RS: One Thousand Nine

Hundred Forty Two only

Supplying & erecting approved make Four Pole 415 V change over 1.00 Each 12120.00 RS: Twelve Thousand One

switch interior for panel mounting with operating mechanism Hundred Twenty only

A.C.23 duty confirming to IS [a] For 200 Amp FP . Cat III

For 125 Amp FP . Cat III 2.00 Each 7713.00 RS: Seven Thousand Seven

214B Hundred Thirteen only

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing & erecting approved make ATS panel suitable for 1.00 Each 49402.00 RS: Forty Nine Thousand

following size of 3 phase, 415 V., 50 Hz, A.C. diesel generating set Four Hundred Two only

complete of scope as detailed below:

1) Power module: Motorised Changeover switch with ATS

215 controller, Auxiliary contactor with NO & NC contacts with

Automatic Battery Charger, indicating lamps for Generator ON,

Mains ON, Load and suitable control terminals and power

terminals with neutral earthing studs. (D) ATS Panel for 50 /

kVA 3 phase DG Set

Providing and erecting Two way Centre off Four pole MCB 1.00 Each 928.00 RS: Nine Hundred Twenty

216 Change Over Switch (IS 13947-3 / IEC 60947-3) in existing box.(a) Eight only

Providing and erecting Approved make Three pole moulded case 0.00 Each 27477.00 RS: Twenty Seven Thousand

circuit breaker having breaking capacity/strength ICU of 50 K.A. Four Hundred Seventy Seven

and above at 415 V. having Normal current rating 400A.with only

variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing including

Neutral Link(Cut Out)(Main Panel)

Providing and erecting in existing fabrication panel Approved 2.00 Each 22813.00 RS: Twenty Two Thousand

make Four pole moulded case circuit breaker having breaking Eight Hundred Thirteen

capacity ICU of 35 K.A. at 415 V having normal current rating of only

250 A. with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing. ICS=100%

of ICU only.(Pump room Main panel )

Providing and erecting in existing fabrication panel Approved 1.00 Each 17667.00 RS: Seventeen Thousand Six

make Four pole moulded case circuit breaker having breaking Hundred Sixty Seven only

capacity ICU of 35 K.A. at 415 V having normal current rating of

219 upto 200A. with variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only.

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and erecting in existing fabrication panel Approved 2.00 Each 6723.00 RS: Six Thousand Seven

make Four pole moulded case circuit breaker having breaking Hundred Twenty Three only

capacity ICU of 25 KA. at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing.ICS=100% of ICU only

Providing and erecting in existing fabrication panel Approved 1.00 Each 8774.00 RS: Eight Thousand Seven

make Four pole moulded case circuit breaker having breaking Hundred Seventy Four only

capacity ICU of 35 K.A. at 415 V having normal current rating of

221 upto 125 A. with variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only.

Providing and erecting following additional parts for panel 5.00 Each 952.00 RS: Nine Hundred Fifty

mounting MCCBs (A)Extended operating rotary handle with pad Two only

222 lock with three position trip,off,on suitable for 25A to 250 A panel

mounting cat-III(Company must be same company of switchgear)

Providing & Erecting Approved make Earth fault Relay suitable to 1.00 Each 5428.00 RS: Five Thousand Four

mount with inter connection to moulded case circuit breaker having Hundred Twenty Eight only

CT ratio & MCCB rating as following along with shunt trip 220 V

AC with all internal connections & complete erected in existing

M.S.housing.(2) 125 A -200 A , CT Ratio 1/200

Providing and erecting multifunctional meter suitable for 2.00 Each 13984.00 RS: Thirteen Thousand Nine

application of Power monitoring and showing measurement of Hundred Eighty Four only

following Voltage, Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive power, Average

voltage Vavg, Peak demand power PM, QM, SM, Demand power P,

Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor

and displacement PF (signed, four quadrant),....................

Description Total Qty Unit Rate Rate In Word Rs. Amount

................. Calculated neutral current, Active, reactive, apparent

energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage

U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag,

Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand

current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz,

40...300 V DC, Network frequency 50 Hz, Type of network 3P,

Display type 7 segments LED, Display colour Red, Messages

display capacity 3 fields of 4 characters, Display digits 12 digit(s) -

14.2 mm in height

Supplying and erecting approved make set of indicator lamps of 6.00 Each 43.00 RS: Forty Three only

225 LED type lamp, lense cover, Bakelite holder complete erected with

necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 6.00 Each 272.00 RS: Two Hundred Seventy

50/5 to 1000/5 ratio 15 VA burden havong 0.5 class accuracy Two only

erected in existing CRCA box duly secured with insulating

materials connected to the meter

Providing & erecting Approved make. energy meter 3 phase 4 wire 1.00 Each 2586.00 RS: Two Thousand Five

227 unbalanced load 500 V.50A / 100A complete erected as directed Hundred Eighty Six only

with necessary earth wire. Cat-ii

Providing & erecting Suitable set of 3 Nos CTS for 100A and above 1.00 Each 2085.00 RS: Two Thousand Eighty

228 as required for Energy Meter including testing charges as required Five only

by Electrical Inspector.

Providing & erecting Miniature circuit breaker single pole 6 Amp. 15.00 Each 122.00 RS: One Hundred Twenty

to 32 Amp. suitable to operate on 240 V A.C. system and having Two only

229 breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark. (Main Panel,Police Station

Panel,Street light Terminal Box)(Spare)

Providing & erecting 240 V MCB Double pole switch for Motor and 10.00 Each 360.00 RS: Three Hundred Sixty

inductive load (C curve) having 10 KA breaking capacity & only

230A confirms to IS:8828 in Existing M.S. box having following capacity.

For 40 Amp DP. (Main Panel,Police Station Panel,3-Phase DB &

For 6-32Amp 5.00 Each 327.00 RS: Three Hundred Twenty

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing & erecting 415 V MCB Four Pole for Motor & Inductive 5.00 Each 803.00 RS: Eight Hundred Three

Load (C Curve) having 10KA breaking capacity & confirms to IS only

231A :8828 in existing box having following capacity [c] 63 Amp. (Main

Panel,3-Phase DB,Police Station Panel) (Spares)

For 40A FP MCB(If required) 5.00 Each 728.00 RS: Seven Hundred Twenty

Providing & erecting 240 V MCB Double pole switch for Motor 2.00 Each 659.00 RS: Six Hundred Fifty Nine

and inductive load (C curve) having 10 KA breaking capacity & only

confirms to IS:8828 with same company metal box with earthing

terminal having following capacity with necessary Numbering with

oil Paint by painter. For 40 Amp.(If Required)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive 2.00 Each 1172.00 RS: One Thousand One

Load (C Curve) having 10KA breaking capacity & confirms to IS Hundred Seventy Two only

:8828 with same company metal box with earthing terminal having

following capacity with necessary Numbering with oil Paint by

painter. [c] 63 Amp. (If Required)

Supplying & fixing box for housing RCCB + MCB combination 5.00 Each 299.00 RS: Two Hundred Ninty

made of 18 SWG sheet steel duly powder coated with gasket, dust Nine only

& vermin proof bakelite shield two earthing terminals for following

234A type of RCCB, RCCB + MCB with necessary numbering / marking

with oil Paint by painter. [a] For 2 pole [Box must be of same

company as MCB, ELCB used]

For 4 pole [Box must be of same company as MCB, ELCB used] 5.00 Each 486.00 RS: Four Hundred Eighty

Providing and erecting Approved make ELCBs / RCCBs 1.00 Each 2434.00 RS: Two Thousand Four

conforming to IS: 12640 and having sensitivity of 30 mA and Short Hundred Thirty Four only

Circuit withstand capacity of 10 KA and suitable for operation on

phase and neutral 240 V having characteristic of quick action &

tripping with all advance feature & do not incorporate any

electronic component (mounted in Box) for following Max. rating

erected as directed with same company metal box with earthing

terminal.Suitable for operation on Single phase 240 Volt max. rating

of (i) For 40 Amp. DP Cat.-III. (If required)

Description Total Qty Unit Rate Rate In Word Rs. Amount

For 25 DP ELCB Amp. (For Lift Panel) 1.00 Each 2145.00 RS: Two Thousand One

Hundred Forty Five only

Providing and erecting Approved make ELCBs / RCCBs 1.00 Each 2872.00 RS: Two Thousand Eight

conforming to IS: 12640 and having sensitivity of 30 mA and Short Hundred Seventy Two only

Circuit withstand capacity of 10 KA and suitable for operation on

phase and neutral 415 V having characteristic of quick action &

236 tripping with all advance feature & do not incorporate any

electronic component (mounted in Box) for following Max. rating

erected as directed .Suitable for operation on Three phase 440 Volt

max. rating of (iii) For 40A FP (For Lift Panel)(3-Phase DB)

Providing ad erecting approved make single phase Double Door 6.00 Each 6254.00 RS: Six Thousand Two

metal clad D.B. as per relevant indian standards ammended upto Hundred Fifty Four only

date. Supplying and fixing following way single phase MCB

distrubution board of company fabricated with sheet box with

powder coated inside and outside after apply seven tank chemical

23 process of 1.2mm thick CRCA sheet cover (Door, Back side &

body of MCBDB) complete with suitable integral single piece

construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting

MCBDB.Manufacturer must be provided...................

D type PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with isolation

& Protecting Cover for 240 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC insulated copper conductor up

to terminal blocks and internal connection, tinned coppper bus bar,

1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including

Description Total Qty Unit Rate Rate In Word Rs. Amount

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C

curve confirms to IS:8828 having breaking capacity of 10 KA) and

S.P. MCB of rating 6 to 32 Amp. with NL suitable to...............

.............. operate on 240 Volt A.C. power. (6 to 25 Amp 12 Nos.) (The

DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish

the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by

EIC on site. Font / number size given by EIC on site as per

requirement] Single phase incoming and horizontal single phase

Supply, Installation, Testing & Commissioning of Three Phase, 440 1.00 Each 6319.00 RS: Six Thousand Three

V Surge Suppressor protection Device (SPD) & 40 Amp. TPN MCB Hundred Ninteen only

(or as per SPD OEM guideline for the protection of SPD which is

erected such a way that it can be operated easily) SPD Must be

Capable to Protect all electrical and electronic equipments. The

Detail Specification are As per Attached sheet with Annexture -A

(Hakel, Iskira,OBO make) (With Three year Gaurantee / Warranty)

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) 1.00 Each 103213.00 RS: One lac Three Thousand

as per following requirement: (1) Input Voltage Range - Three Two Hundred Thirteen only

Phase 340 To 480 Volt AC. (2) Out put Volatge-Three Phase 415 Volt

AC (Line - Line) with Voltage Regulation of +/-1%. (3) Frequency

range -47 Hz To 63 Hz. (4) Efficiency - More or equal to 98%. (5)

Type of Stabilizer-Suitable for Balance & Unbalance Load and

Voltage including SPD (6) Controlled Type - Digital Micro

239 Controller Based Disply. (7) Rate Of Correction - Upto 100 Volt/Sec

(Line - Line) (8) Servo Motor Drive - AC Syncronous Stepper Motor -

As per KVA Capacity, Out put volatge and Voltage regulation

requirement. (9) Nil Wave form Distortion and Effect of Load

Power. (10) Responce Time - 10 milli second. (11) Protection

requirements - Input low Cut off protection/Input High Cut Off

Protection /Output Low Cut Off protection/lOutput High

(12) Fault Annuciation Panel LED shows Input present, Input high

Input low, Output Normal, Output High, Outpur low, Overload.

(13) Output On time delay-10 seconds (14) Ambient Tempeature

capacity-0-45 RH upto 90%. (15) Enclosure Type - IP 20 (16) Type of

Cooling - Oil (17) cabinet/Enclosure : Oil tank must be made from

3mm thick CRCA sheet & cabinet must be made from 2mm thick

CRCA sheet ,Output: Bypass switch with changeover switch and

Provied SPD & 5 year free replacement guarantee on Stamp paper.

Loading and unloading of above item shall be done by hydra and

skill work force under supervision of electrical engineer and

guidelines given by manufacturer to avoid damage to the item.

Picture of it to be submitted in running bill / final bill.Size of door

and Ele. room/Pump room shall be checked by agency's engineer

before giving order. giving order.If found any problem in size

discuss with GSPHCL engineer for rectification before.(Make -

Servomax,Fuji,Krykard,ProtkG)

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supplying & erecting 12 mm thick backelite sheet of approved make 2.00 Sq. Mtr. 2289.00 RS: Two Thousand Two

and grade on 25 x 25 x 3 mm red oxide painted angle iron frame Hundred Eighty Nine only

suitable for fixing ICDP SWITCH and energy meter (contractor

240 shall make approved drawing of Bakelite sheet To arrange required

No. of Energy meter & ICDP switch -busbar etc. as per Actual space

available in electrical room at site)

Providing and erecting metallic vitrified danger notice board as per 5.00 Each 69.00 RS: Sixty Nine only

241 language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

Supplying and laying UPVC cable trunking system comprising 20.00 Mtr. 275.00 RS: Two Hundred Seventy

unplasticised polyvinyl, chloride rigid material with ignition free & Five only

flame proof confirming BS with necessary end caps Internal and

242A external bend, flat bends, coupler, tee etc. All necessary accessories

and measuring of following sizes. [1] 75 mm x 50 mm trunking (MK

/ Legrand/OBO Make Only)

100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 20.00 Mtr. 424.00 RS: Four Hundred Twenty

Supplying and erecting approved make GRP/FRP Perforated type 50.00 Rmt 636.00 RS: Six Hundred Thirty Six

Cable Tray Material – Corrosion Resistant Polyester Flame only

Retardant U.V. Stabilized Resin System - Manufactured from

Pultruded Sections- Polyester Resin System, Glass Content : 55 –

% - - Standard Length : 3000 mm- Support Span – 1500 mm,

243A Deflection L/200 - Specification NEMA FG1 1993- UV Resistant -

Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low

Flammability - Specification Followed NEMA FG1 1993 Oxygen

Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent

of Burning) – 20 mm as per..................

.................... Standard ASTM D 635 - Tensile Strength – 4000 –

Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 –

10000 Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength

– 130 Kg/Cm2 as per Standard ASTM D 256- Compressive Strength

– 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol

Hardness – 50 – 65. For Width - 300 mm, Pultruded “C” Channel

with 50 mm Sides 4 mm Thickness, Loading 30 Kg./Mtr.

Description Total Qty Unit Rate Rate In Word Rs. Amount

For Width - 150 mm, Pultruded “C” Channel with 30mm Sides 3 50.00 Rmt 493.00 RS: Four Hundred Ninty

mm Thickness, Loading 15 Kg./Mtr. Three only

Providing and fixing approved make Ladder type cable tray. Made 50.00 Rmt 306.00 RS: Three Hundred Six

from M.S sheet. The cable tray should be bended as per IS only

2062/1079 shall be fabricated of double bended channel section

longitudinal members with single bended Channel section. Rungs

of members welded to the base of the longitudinal members at

244 mm c/c spacing . as per IS and shall be coated with hot dip

galvanizing as per IS 2629/4759. with coupler plate / Fish plate

and GI hardware like nut - bolt and washers etc. erected on existing

support as per Specification and as per instruction of engineer in

charge..(3) 300 X 50 X 2.0 mm Thick

SITC of specified make X color for Cat. 6 Data and Y color for Cat. 2000.00 Mtr. 47.00 RS: Forty Seven only

6 voice cable to be done in prelaid PVC pipe / raceway, but without

the cost of raceway or pipe (the wire is to be drawn from MFD/ JB

to outlet point) For CAT - 6 (For Computer Cabling and For Voice

Cabeling) (Dlink, Molex, commscope system, Legrand make Only)

SITC of 24 x 10/100/1000BASE T ports 2.00 Each 15247.00 RS: Fifteen Thousand Two

4 x Gigabit RJ45/SFP Combo ports Hundred Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management

user interface.

24 Port. [Dlink,cisco enterprise,HP enterprise,netgear,Allied telesys

and model approved by EIC as per specification]

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB 2.00 Each 4357.00 RS: Four Thousand Three

based IO Jacks (RJ45, TIA 568C Category 6, Installation and Hundred Fifty Seven only

Termination of all 24 nos. Catergory 6 UTP , unloaded with

individually replaceable 24 nos. Category 6 I/O Jacks complying

with TIA 568.C.2, as per given jack specification Shall be suitable

for loading unshielded & shielded jacks for different category

systems (CAT 6 & CAT 6A) [molex,commscope system,legrand ]

Description Total Qty Unit Rate Rate In Word Rs. Amount

SITC of company fabricated Patch cords shall conform to Cat 6 & 30.00 Each 199.00 RS: One Hundred Ninty

conductor shall be stranded for better flexibility Shall support Nine only

network line speeds up to 1 Gbps Shall have RJ 45 jacks. For 2 Mtr.

[molex,commscope system,legrand]

SITC of company fabricated Patch cords shall conform to Cat 6 & 30.00 Each 155.00 RS: One Hundred Fifty Five

conductor shall be stranded for better flexibility Shall support only

network line speeds up to 1 Gbps Shall have RJ 45 jacks. For

Mtr.[molex,commscope system, legrand ]

Supply and installation of 9U steel rack for installing 4 nos. 2.00 Each 11441.00 RS: Eleven Thousand Four

Ethernate switches/Hubs. The Rack should be fully enclosed steel Hundred Forty One only

housing fabricated with 14 SWG sheet and powder coated with

250 glass doors and having wire management systems. The rate

includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip

and all the wiring in the rack. Size 600 X600 mm (Rittal, Valrack,

APC, Legrand Make )

Supplying & erecting Delton or approved make Telephone Cable 50.00 Mtr 124.00 RS: One Hundred Twenty

electrolytic copper conductor PE insulation twisted in two pairs, & Four only

wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to C-

251A DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.(a) Conductor Size 0.5 mm

armoured Ten Pairs.[make and model approved by EIC strictly as

per tender specification]

For Conductor Size 0.5 mm armoured Twenty Pairs.[make and 50.00 Mtr 198.00 RS: One Hundred Ninty

251B model approved by EIC strictly as per tender specification] Eight only

Providing & erecting Tag Box for Telephone Lines suitable for 20 1.00 Each 1355.00 RS: One Thousand Three

252 Pairs Krone type complete with Krone & locking arrangements. Hundred Fifty Five only

Providing & erecting Tag Box for Telephone Lines suitable for 50 1.00 Each 1730.00 RS: One Thousand Seven

253 Pairs Krone type complete with Krone & locking arrangements. Hundred Thirty only

Description Total Qty Unit Rate Rate In Word Rs. Amount

SITC LED Bollard fittings of minimum height 600 mm & dia.100mm 5.00 Each 2661.00 RS: Two Thousand Six

having polycarbonate clear/milky diffuser mounted on 3mm thick Hundred Sixty One only

aluminium finished powder coated pipe with base plate

160x160mm with erection by M8x75mm fastner with required RCC

foundation.IP65 for 9-20 watt, surge- 4 kv-

Supplying and erecting approved make Octagonal pole made from 4.00 Each 9044.00 RS: Nine Thousand Forty

HR sheet steel. The pole should be made as per IS. and shall be Four only

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box with Hot Deep

Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key

255A locking with silicon rubber gasket. Consist of terminal plate of min

6mm Hylam sheet, standard profile 35 mm X 7.5 mm Din-Rail &

MCB, Brass stud type terminal and arrangement for cable

termination to be erected on RCC foundation as per details given

by manufacturer and EIC..................

................ considering site requirement.For 6 Mtr. Long 70 mm Top

X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long

with necessary G.I. J Bolts .Approx Pole weight 59 kg (make:-

Bajaj,Valmont,Transrail,Ambica, RR Ispat (Test certificate to be

submitted)SITC Octagonal Pole Foundation (1) Grade of RCC 1:2:4,

(2) Grade of steel rainforcement of RCC FE 415, (3) Clear cover to

rainforcement 50mm, (4) Concrete vibrated, (5) use suttering /

farma(6) Foundation Colour Same As Building Colour outside

Shade (7) Detail drawing will be given by corporation

For 8 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness 4.00 Each 15370.00 RS: Fifteen Thousand Three

with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm Hundred Seventy only

long hot deep galvanized J-Bolt, nuts, washers with 1000mm under

ground and 200mm above ground level and 450mm dia.

255B Foundation in 1:2:4 proportion.(As Per Details given by

Manufacturer & EIC Considering Site Requirement.Approx.Pole

Weight 67kg.) (make:-Bajaj,Valmont,Transrail,Ambica, RR Ispat

(Test certificate to be submitted)

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supplying & erecting Sintex or approved make SMC press 2.00 Each 890.00 RS: Eight Hundred Ninty

moulded composite FRP. loop-in, loop-out approx. 2mm thick box only

complete with bakelite connector strip 4way & hinged doors having

256A locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps& earth bolt

of following size of box.a) 300mm x 200mm x 100mm [deep] (For

For 140mm x 140mm x 100mm [deep] 2.00 Each 295.00 RS: Two Hundred Ninty

For 250mm x 200mm x 100mm [deep] 2.00 Each 510.00 RS: Five Hundred Ten

Supplying and erecting Coil type earthing, coil made from 8 SWG 8.00 Each 369.00 RS: Three Hundred Sixty

galvanised iron wire with 50 mm OD and 50 turns (length of turns Nine only

approx. 200 mm) and having additional continuous streight

length of 3.00 mtr at open end and should be connected to

earthing bolt and burried in 1.5 mtr deep specially prepared earth

pit complete with salt and charcoal/coke as required for coil type

earthing. (Approx weight of coil 1.0 to 1.1 Kgs)

Supplying and erecting Fabricating terminal box for street light pole 10.00 Each 702.00 RS: Seven Hundred Two

made from 16 SWG M.S. sheet having following size complete with only

fixing arrangement for terminal board, with necessary hole for wire

entry and exit from the box. The box shall be provided with cover

and hinges on one side and bolting at other end The box shall be

fixed by clamps fabricated from 25mm x 6mm flat.The box shall be

258 painted with one coat of red oxide and two coats of paint having

following box size 330 mm x 260 mm x 140 mm (depth). And

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.

bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with

suitable brass studs with nuts, washers and clamps of size 25 mm x

3 mm suitable for pole painted with one coat of red lead paint.

Description Total Qty Unit Rate Rate In Word Rs. Amount

For Wall & Terrace Street light Bracket:Providing and Fixing of wall 8.00 Each 487.00 RS: Four Hundred Eighty

and terrace bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm Seven only

outside diameter and length suitable for building face for fixing the

brackets and having spread of Upto 0.50 mtr. length with suitable

259 degree angle as per site situation suggested by EIC. vertical plane

and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of

alluminium paint (Zinc Coating before alluminium Paint is

mandatory)with .......................

.................... complete with 150*150*2mm thick G.I plate with 4no

heavy duty galvanized jasti khila of required size or Single arm

bracket (pipe in pipe type) suitable for terrace as per design given

by EIC Considering parfait, height ,width and total height of

building and type of led fitting .

(a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash

make Only) (Fabricators:- Ambica / Fab / Bajaj / Impression

equipment Only) (Test certificate to be submitted)

For Street light Pole Bracket:Supplying and erecting street light 5.00 Each 487.00 RS: Four Hundred Eighty

pole bracket bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm Seven only

outside diameter complete with suitable B class G.I. Sleeve tubing

of 2 mm. thick and required size and approx. 45 Cms length

suitable for 76.5 / 80 mm. required size of pole top having nuts and

bolts for fixing the brackets and having spread of Upto 0.50 mtr.

260A length with 110 deg. with vertical plane and suitable welded

stiffner reducer and nipple with check nut complete painted with

one coat of red oxide and two coats of alluminium paint.(Zinc

Coating before alluminium Paint is mandatory) (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only)

(Test certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash 1.00 Each 616.00 RS: Six Hundred Sixteen

260B make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR only

Ispat Only) (Test certificate to be submitted)

Description Total Qty Unit Rate Rate In Word Rs. Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire 2.00 Each 4406.00 RS: Four Thousand Four

with total consumption of max. 55 Watts with single piece heavy Hundred Six only

duty & sufficient size of die cast aluminium housing to

261 accommodate driver, both SPD and necessary wiring and terminal

easily inside the housing. High power LEDs wattage of 5 Watt

(Driving current of LED should be max. 80Pct. of Rated current)

..................shall be mounted on high quality metal core PCB with

extremely precison designed heat sink complete with IP66

protection. LED lense are covered with thoughened glass /

premium cluster Lens for better light distribution. The fixture

should be suitable for pole/bracket mounting. The fixture should be

complied with both LM79 and LM 80 certified. LED module should

be tested L70 at 50,000 hrs ( All Test Certificate must be submitted

with RA bill). LED fitting provided with high quality potted driver

with Metal housing and protection against high and low Voltage

cut Off, Protection against 440V. Driver should................

.................. have protection like over current, over voltage, short

circuit and operational in the temperature range of 0 deg to 50 deg

and humidity range of 10Pct. to 90Pct. RH. THD of driver should be

less than 10Pct. and P.F greater than 0.95. The Fixture should meet

the technical criterias like Operating Voltage range 180 to 270 V,

total lumens of fitting not less than 7500, CCTgreater than 4K/6K as

per site requirement & decided by EIC, CRI greater than 65, beam

angle 120 deg, surge immunity level at least 4 KV integral and

KV non integral. (Note:- The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture)

Description Total Qty Unit Rate Rate In Word Rs. Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire 8.00 Each 5229.00 RS: Five Thousand Two

with total consumption of max. 75 Watts with single piece heavy Hundred Twenty Nine only

duty & sufficient size of die cast aluminium housing to

accommodate driver, both SPD and necessary wiring and terminal

262 easily inside the housing. High power LEDs wattage of 5 Watt

(Driving current of LED should be max. 80Pct. of Rated current )

shall be mounted on high quality metal core PCB with extremely

precison designed heat sink complete.........................

....................... with IP66 protection. LED lense are covered with

thoughened glass / premium cluster Lens for better light

distribution.The fixture should be suitable for pole/bracket

mounting. The fixture should be complied with both LM79 and LM

80 certified.LED module should be tested L70 at 50,000 hrs ( All

Test Certificate must be submitted with RA bill) . LED fitting

provided with high quality potted driver with Metal housing and

protection against high and low Voltage cut Off, Protection against

.................Driver should have protection like over current, over

voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10Pct. to 90Pct. RH. THD of

driver should be less than 10Pct. and P.F greater than 0.95. The

Fixture should meet the technical criterias like Oprating Voltage

range 180 to 270 V, total lumens of fitting not less then

CCTgreater than 4K/6K as per site requirement & decided by EIC,

CRI greater than 65, beam angle 120 deg, surge immunity level at

least 4 KV integral and 10 KV non integral. (Note:- The

manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire 6.00 Each 6316.00 RS: Six Thousand Three

with total consumption of Max.105 watts with single piece heavy Hundred Sixteen only

duty & sufficient size of die cast aluminium housing to

accommodate driver, both SPD and necessary wiring and terminal

easily inside the housing. High power LEDs of 5 Watt (Driving

current of LED should be max. 80Pct. of Rated current ) shall be

mounted on high quality metal core based PCB with

Description Total Qty Unit Rate Rate In Word Rs. Amount

...................... precised designed heat sink, complete with IP66

protection. LED lense are covered with toughened glass /

premium cluster Lens for better light distribution. The fixture

should be suitable for pole/bracket mounting. The fixture should

be complied both LM79 and LM 80 certified. LED module should be

tested L70 at 50,000 hrs( All Test Certificate must be submitted with

RA bill). LED fitting provided with high quality potted driver with

Metal housing and protection against high and low Voltage cut Off,

Protection against 440V.....................

..................... Driver should have protection like over current, over

voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10Pct. to 90Pct. RH. THD of

driver should be less than 10Pct. and P.F greater than 0.95. The

Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 15750, CCT

greater than 4K/6K as per site requirement & decided by EIC, CRI

greater than 65, beam angle 120 deg, surge immunity level at least

KV integral and 10 KV non integral. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs

free replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire 6.00 Each 5324.00 RS: Five Thousand Three

with total consumption of Max.75 watts with single piece heavy Hundred Twenty Four only

duty & sufficient size of die cast aluminium housing to

accommodate driver, both SPD and necessary wiring and terminal

easily inside the housing. High power LEDs of 5 Watt (Driving

current of LED should be max. 80Pct. of Rated current ) shall be

mounted on high quality metal core based PCB with

extremely...................

Description Total Qty Unit Rate Rate In Word Rs. Amount

................. precised designed heat sink, complete with IP66

protection. LED lense are covered with toughened glass /

premium cluster Lens for better light distribution. The fixture

should be suitable for pole/bracket mounting. The fixture should be

complied both LM79 and LM 80 certified. LED module should be

tested L70 at 50,000 hrs ( All Test Certificate must be submitted

with RA bill). LED fitting provided with high quality potted driver

with Metal housing and protection against high and low Voltage

cut Off, Protection against 440V.........................

................... Driver should have protection like over current, over

voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10Pct. to 90Pct. RH. THD of

driver should be less than 10Pct. and P.F greater than 0.95. The

Fixture should meet the technical criterias like Operating Voltage

range 180 to 270 V, total lumens of fitting not less then 11250, CCT

greater than 4K/6K as per site requirement & decided by EIC, CRI

greater than 65, beam angle 120 deg, surge immunity level at least

KV integral and 10 KV non integral. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs

free replacement Guarantee for complete Fixture)

SITC of Outdoor aesthetically designed LED Flood Light Luminaire 8.00 Each 9304.00 RS: Nine Thousand Three

with total consumption of Max.250 watts with single piece heavy Hundred Four only

duty & sufficient size of die cast aluminium housing to

accommodate driver, both SPD and necessary wiring and terminal

easily inside the housing. High power LEDs of 5 Watt (Driving

current of LED should be max. 80% of Rated current ) shall be

mounted on high quality metal core based PCB with

Description Total Qty Unit Rate Rate In Word Rs. Amount

....................... precised designed heat sink, complete with IP66

protection. LED lense are covered with toughened glass /

premium cluster Lens for better light distribution. The fixture

should be suitable for pole/bracket mounting. The fixture should be

complied both LM79 and LM 80 certified. LED module should be

tested L70 at 50,000 hrs ( All Test Certificate must be submitted

with RA bill). LED fitting provided with high quality potted driver

with Metal housing and protection against high and low Voltage

cut Off, Protection against 440V....................

..................... Driver should have protection like over current, over

voltage, short circuit and operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. THD of driver

should be less than 10% and P.F > 0.95. The Fixture should meet the

technical criterias like Operating Voltage range 180 to 270 V, total

lumens of fitting not less then 11250, CCT > 4K/6K as per site

requirement & decided by EIC, CRI > 65, beam angle 120 deg, surge

immunity level at least 4 KV integral and 10 KV non integral. (Note:-

The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture)

Providing & Erecting Univesal Astro interlligent Street light Control 1.00 Each 18406.00 RS: Eighteen Thousand Four

266 System insu with weather proof box for indoor allplication 5KVA ( Hundred Six only

as Per atteched Specification)

Providing , erecting , testing and commissioning Insu Intelligent 1.00 Each 24984.00 RS: Twenty Four Thousand

Streetlight Controller specially design for energy saving in Nine Hundred Eighty Four

conventional streetlight system ( Cat. No. SLC 03 1Ph 15KVA only

20Amp/Cat NoSLC 03 1 ph 15 KVA 20 amp per phase) having

267 technial specification ,1 phase 2 wire, 230 V AC/ph +/ 25Pct. R Y B

N 2 Wire supply System.50 Hz (+ / 10 Pct.), 2 W (Stand By) to 4 W

(at street light operation) consuption , Advance 8 bit micro

controller, switching on longitude and latitude base, accaracy of +

1 minute per month. with inbuilt....................

Description Total Qty Unit Rate Rate In Word Rs. Amount

....................... battery, with battery life of more than 8 years, with

speicial device which hold the parameter for more then 10 years

without any power and password protected. 16 character and two

line LCD display with backlight, 4 keys user friendly keyboard

system, 7500 VA feeder pillar capacity, 63/100 amps isolator

Outpus with termination 40/63 Amps 2/3 pole contactor , 3X16

Amps with F R cable provision to by pass by way of

........................ operation through auto/manual switch, 2 to

centigrade and humidity 90 Pct. non condensing Outdoor type

installation on pole with clamps.(Provided with clamps and nut

bolt) or wall or floor, three locking system flush type internal panel

lock, external pad lock and internal U clamp locking systems for

against theft of panel. having 17/25 Kg weight ,16/18 guage MS

weather proof with industrial exterior powder coated with 7 tank

process RAL 7035. (Make & model to be approved by EIC)

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 60.00 Mtr 642.00 RS: Six Hundred Forty Two

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under only

ground or to be laid on wall with suitable G.I. heavy guage 1.0mm

268A thick cable clamp or in existing DWC pipe underground or road

crossing or floor.(a) For 3*1/2 core120 Sq. mm (70 Sq. mm * 1/2

core)(Cut off Switch to Sump room Main Panel )

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 80.00 Mtr. 338.00 RS: Three Hundred Thirty

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under Eight only

ground or to be laid on wall with suitable G.I. heavy guage 1.0mm

268B thick cable clamp or in existing DWC pipe underground or road

crossing or floor.(a) For 3*1/2 core 50 Sq. mm (25 Sq. mm * 1/2

core)(Main Panel to Police Station Panel CO Switch and DG Set

to MAin Panel )

For 3*1/2 core 70 Sq. mm (35 Sq. mm * 1/2 core) If Rewqured 60.00 Mtr. 450.00 RS: Four Hundred Fifty

For 4 core x 25 Sq. mm ( Police Station Main Panel to Lift Panel 60.00 Mtr. 227.00 RS: Two Hundred Twenty

and Main panel Sump room to Fire Panel ) Seven only

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 386.00 Mtr. 451.00 RS: Four Hundred Fifty One

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be only

laid on wall with suitable G.I. heavy guage 1.6mm thick cable clamp

or in existing DWC pipe underground or road crossing or floor.

(a) For 4 core x 4 sq.mm.

Providing & erecting Mains with ISI marked, 1.1 KV grade 60.00 Mtr. 70.00 RS: Seventy only

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS:694, IEC - 227 erected in

existing pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. For One

wire 6.00 Sq.mm (Conductor resistance should be as per

[f] One wire 10.00 sq. mm (Conductor resistance should be as per 50.00 Mtr 114.00 RS: One Hundred Fourteen

IS:8130/1984 ) only

For One wire 16.00 Sq.mm (Conductor resistance should be as per 150.00 Mtr. 176.00 RS: One Hundred Seventy

IS:8130/1984 ) Six only

For One Wire 25.00 Sq.mm(Conductor resistance should be as per 50.00 Mtr. 293.00 RS: Two Hundred Ninty

IS:8130/1984 ) Three only

For One Wire 35.00 Sq.mm(Conductor resistance should be as per 50.00 Mtr. 373.00 RS: Three Hundred Seventy

IS:8130/1984 ) Three only

For One wire 70.00 Sq.mm (Conductor resistance should be as 50.00 Mtr. 829.00 RS: Eight Hundred Twenty

per IS:8130/1984 )) Nine only

Providing & fixing Solderless crimping type Aluminium lugs 16.00 Each 15.00 RS: Fifteen only

conforming to IS suitable for cable of following size evenly crimped

271A with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] For

271B For 35/50 Sq.mm 28.00 Each 20.00 RS: Twenty only

For 70 Sq mm 28.00 Each 25.00 RS: Twenty Five only

271D For 120 Sq mm 18.00 Each 45.00 RS: Forty Five only

Providing & fixing Solderless crimping type Copper lugs 298.00 Each 8.00 RS: Eight only

conforming to IS suitable for cable of following size evenly crimped

272 with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing & fixing double compressed heavy duty flange type 30.00 Each 43.00 RS: Forty Three only

brass cable gland with rubber ring for P V C insulated armoured

273A cable complete with outgoing tails, insulating tape etc. For

following size cables. (a)For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI,

Comet Make Only)

For 3*1/2 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 66.00 RS: Sixty Six only

For 2 to 4 core x 70.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 102.00 RS: One Hundred Two

For 2 to 4 core x 50.0 Sq. mm (Sigma, MCI, Comet Make Only) 12.00 Each 75.00 RS: Seventy Five only

For 2 to 4 core x120 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 139.00 RS: One Hundred Thirty

Supplying following size of Light duty “A” Class G.I. Pipe & 20.00 Mtr. 171.00 RS: One Hundred Seventy

erecting as directed by Engineer-in-charge. For 25 mm dia. One only

Providing & Erecting Flexible PVC insulated multistrand multicore 80.00 m 58.00 RS: Fifty Eight only

1.1 kv grade ISI marked copper wires of following size to be erected

as directed. 3 core 1.5 sq.mm. PVC insulated round copper wire ISI

For 3 core 2.5 sq.mm. PVC insulated round copper wire ISI mark. 150.00 Mtr. 96.00 RS: Ninty Six only

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. 10.00 Mtr. 261.00 RS: Two Hundred Sixty One

below ground across the road crossing or on floor with necessary only

material in an approved manner and making the ground as per

original.(C) For 150mm Dia

Providing & laying HDPE Double walled corrugated pipes (DWC) 250.00 Mtr. 117.00 RS: One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load Seventeen only

required of 450N capacity with anti rodent and ultra violet material

properties with necessary connecting accessories of same material

277A at required depth to be laid 90 cms. under ground for laying of

cable below ground / road surface for enclosing cable and back

filling the same to make ground as per original. (A) For Outer dia.

50 mm and Inner dia. 38 mm. (Test Certificate to be Submitted)

For Outer dia.90mm and Inner dia. 75mm(Test Certificate to be 60.00 Mtr. 150.00 RS: One Hundred Fifty

Submitted) only

For Outer dia.120mm and Inner dia. 103.50mm (Test Certificate to 60.00 Mtr. 191.00 RS: One Hundred Ninty

be Submitted) One only

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing & erecting open well horizontal mono block pump set 2.00 Each 17108.00 RS: Seventeen Thousand

with cast iron body, complete for three phase submersible motor One Hundred Eight only

having [C] For 3 HP 3 phase open well horizontal mono block

pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head

suitable for 50/65 mm dia delivery pipe

Supplying and erecting approved make 3 HP DOL type motor 1.00 Each 46157.00 RS: Forty Six Thousand One

control cubical panel made from 16 G. CRCA sheet duly epoxy Hundred Fifty Seven only

powder painted inside and outside with hinged doors and locking

arrangement Floor Mounting On 300 mm Height with MS Stand

Angle & CC Foundation. Size 35 mm (H) x 35 mm (W) x 05 mm (D).

279 The detail specification & quantity of material used are as under.

Panel must be with minilec relay for auotmatic change over for

pump 1 & 2 logically without using manually change over switch

(Minimum Panel Size: 1.10 meter (H) x 1.10 meter (W) x

Rating: 63 Amp., Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-

65), Rating: 0-60 Amp., Make: Meco, Qty: 01 No. (3) Ammeter

Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer, Qty: 01 No.

(4) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Meco, Qty:

No. (5) Volt Selector Switch, Rating: 6 Amp., Rotary, Make: Salzer,

Qty: 01 No. (6) C.T.- Current Transformer, Rating: 60/5 Amp.,

Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B), Rating:

mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB , Rating: 20 Amp.,

Make: L&T , Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm,

Make: Any ISI, Qty: Lot (10) Copper Busbar, Rating: 63A/100 Amp.,

Qty: Lot (11) Numeric logical relay, Qty: 1 No.

Description Total Qty Unit Rate Rate In Word Rs. Amount

10 KA, Rating: 20 Amp., Make: L&T, Qty: 02 Nos. (2) Power

Contactor (415 V) Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos.

(3) Over Load Relay, Rating: 6-10 Amp., Make: L&T, Qty: 02 Nos.

(4) Digital Ameter (SR-65), Rating: 0-20 Amp., Make: Meco, Qty:

Nos., (5) Digital Voltmeter (SR-65), Rating: 0-500 V, Make: Meco,

Qty: 02 Nos. (6) Indicating Lamps (Start,Run,Trip), Rating: 22.5 mm

LED, Make: Airon, Qty: 04 Nos. (7) Push Button (Start,Stop),

Rating: 22.5 mm, Make: Airon, Qty: 02 Nos. (8) SPP, Rating: 415 V,

Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per Amp.,

Make: Airon, Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm.,

Make: Any ISI, Qty: Lot (11) Power Wiring, Rating: As Per Amp.,

Make: Any ISI, Qty: Lot

KA, Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP

Type, Rating: 2 KVAr, Make: Concap, Qty: 01 No., (3) Power wiring,

Rating: As Per Amp., Make: Any ISI, Qty:Lot

KA, Rating: 32 Amp., Make: L&T, Qty: 01 No. (2) Power wiring,

Rating: As Per Amp. (3) Earthing Strip: 25 x 3; G.I. Strip, Qty:

No. (4) MCB-DP-10KA , Rating: 20A, Make: L&T, Qty.:01 Nos.

Supplying, & erecting C.I. swing, check type non-return (Reflux) 3.00 Each 1010.00 RS: One Thousand Ten

Valve -ISI marked suitable for following size (A) 50 mm dia. Hundred Ten only

Lowering of existing submersible motor pump set complete with 2.00 Each 848.00 RS: Eight Hundred Forty

required No. and size of pipes by means of proper chain pulley Eight only

block and pipe wrenches. Job includes stacking of pipes

cronologically after the checking of threads. [d] For open well

horizontal submercible pump set for sump well. (ii) 1 HP to 5 HP

Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect 1.00 Each 232.00 RS: Two Hundred Thirty

suitable kitkat fuse / MCB to be . erected on polished wooden Two only

board inside the box with hinged/sliding door with rubber rings

282 and erected on pole with suitable pole clamp, all duly painted with

one coat of red oxide and two coats of paints. (Cost of Fuse / MCB

shall be taken extra) [Provision for motors cable joints near sump]

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and erecting ISI marked PVC insulated PVC Sheathed 20.00 Mtr. 103.00 RS: One Hundred Three

283 Flat flexible Submersible copper cable approved make of following only

Size. [d] 3 Core x 2.5 Sq. mm

Providing water proof straight joint in PVC insulated flat flexible 2.00 Each 188.00 RS: One Hundred Eighty

copper cable by using insulated material water proofing material Eight only

and making the joint complete. UP to 10 Sq.mm

Providing, erecting, fabricating the M.S. structure as per 500.00 kg 77.00 RS: Seventy Seven

requirement of site as per structure design Including proper size only

approved by EIC of M.S. angles, flats, bars, square pipe, channels,

sections (Tata,Zindal,Asian,Jsi Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac

285 make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering

and finishing complete. All hole opening of square pipe end must

be closed with M.S plate welding. Payment will be done on KG as

per Actual weight.

Supplying & erecting bank of all polypropylene condenser (APP 20.00 KVAR 690.00 RS: Six Hundred Ninty

type) with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of only

P.F. correction for operation on 3 phase 50 c/s, 400 /440V (+ / -

10%) with externally discharging resistance, earthing terminal &

built on angle iron of channel iron frame work and provided with

terminal cover box. Complete erected on provided iron bracket or

on floor duly tested by license.

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supply, Installation, Testing and Commissioning (SITC) of 50 KVA Silent Type 1.00 Each 776739.00 RS: Seven lac Seventy Six

Diesel Generating (DG) Set(s) of prime power rating (kVA) as specified, complete Thousand Seven Hundred

as a packaged system, conforming to CPCB IV+ (or better) emission norms, and Thirty Nine only

complying with all applicable statutory requirements, codes and standards

including (but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS 5514 (latest

editions/amendments). The DG set shall be suitable for 415 V ±10%, 50 Hz ±5%,

3-phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for tropical

287 conditions, and shall be capable of delivering 10% overload for one (1) hour after

twelve (12) hours of continuous operation (ISO 8528), unless otherwise stated by

the OEM. The scope shall include complete accessories, interconnections, anti-

vibration arrangements, exhaust system, acoustic enclosure, consumables for

first commissioning, and all works necessary to render the installation fully

functional and compliant, as directed by the Engineer-in-Charge (EIC).

(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably

rated for the specified DG set prime rating at site conditions, complete with

dynamically balanced flywheel, heavy-duty engine mounting, and electric

starting arrangement. The engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall comply with ISO 8528/BS

5514 requirements for steady-state speed regulation. Engine shall be complete

with dry type air cleaner with restriction indicator, lube oil cooler (if required),

radiator/cooling package (as applicable), and all sensors/switches required for

protections and annunciation.........................

...................... The engine shall be capable of 10% overload for one (1) hour after

twelve (12) hours continuous operation and shall be suitable for continuous duty

under tropical ambient conditions. The offered engine model shall be CPCB IV+

compliant and shall be supplied with complete emission control/after-treatment

system (including DEF/urea dosing where applicable) along with all accessories,

tanks, pumps, heaters and controls required for compliant operation. The supply

shall include first fill of lubricating oil, coolant and consumables required for

initial commissioning and testing. All fasteners, couplings, guards, hoses and

standard/recommended accessories required for safe and reliable operation

shall be included and shall be subject to inspection/approval by the EIC.

Description Total Qty Unit Rate Rate In Word Rs. Amount

(B) Engine-Mounted Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with

LCD/LED display, event log and alarm/trip annunciation, complete with all wiring,

harnesses and terminations. Indications/protections shall include (minimum) the

following and any additional protections recommended by the OEM: (i)

Start/Stop key switch and/or push buttons with emergency stop; (ii) Output

breaker: suitably rated 4-pole ACB/MCCB/MCB as applicable, with minimum

kA rupturing capacity (or as per fault level at site, whichever is higher), with

shunt trip where required; (iii) Jacket water/coolant temperature – indication

and high temperature alarm/trip; (iv) Lube oil pressure – indication and low

pressure alarm/trip;......................

.................. (v) Lube oil temperature (where provided) – indication/alarm; (vi)

Battery charging indication, battery voltage indication and charging failure alarm;

(vii) Engine speed (RPM) indication and overspeed trip; (viii) Engine running

hours meter (non-resettable); (ix) Fuel level indication and low fuel alarm; (x) Fail-

to-start / crank fail alarm; (xi) Under/over frequency and under/over voltage

protection (alternator side) as applicable; (xii) Common alarm and common trip

indication with potential-free contacts for BMS/remote annunciation. All

meters/indications shall be of proven industrial quality and the panel shall be

wired, ferruled and labelled. The contractor shall submit wiring diagrams,

protection settings and datasheets for approval prior to dispatch/installation.

Description Total Qty Unit Rate Rate In Word Rs. Amount

(C) Alternator:

Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase,

Hz, 1500 RPM, 0.8 lagging PF, continuous duty, dynamically balanced rotor, self-

cooled, self-excited and AVR regulated. Enclosure shall be SPDP, minimum IP23.

Insulation shall be Class H with suitable tropicalization; temperature rise shall be

within limits of the applicable standard. The alternator shall comply with IS

13364 (Part 2), IS 4722 and/or BS 2613 (latest), as applicable. Voltage regulation

with AVR shall be within ±1.0% (steady state) or OEM standard whichever is

better. The alternator shall be capable of 10% overload for one (1) hour after

twelve (12) hours of continuous operation. Harmonic distortion shall be suitable

for non-linear loads; alternator shall be equipped with appropriate AVR features

(e.g., soft start, UFRO) and shall be suitable for motor starting duties typical to

the installation. Terminals shall be brought out to a terminal box with adequate

space for termination and shall include earthing terminals. All routine/type test

certificates (as applicable) shall be submitted for acceptance.

(D) Base Frame & Foundation: Engine and alternator shall be mounted on a

suitably designed, fabricated MS channel base frame with stiffeners, lifting

arrangement and coupling guard, duly painted/treated for corrosion protection.

The set shall be installed on an adequately designed cement concrete

foundation/pedestal with anchor bolts, pockets, grouting and anti-vibration

mounts (AVMs) / spring isolators as per OEM recommendations and site

conditions. Vibration levels shall be within OEM permissible limits. The

contractor shall be responsible for alignment, levelling, tightening torque and re-

check after load trial, complete in all respects..............

(E) Fuel Tank: In-built/base fuel tank fabricated from minimum 3 mm thick MS

sheet, duly leak-tested, complete with filling arrangement, vent, drain, cleaning

opening, level indication and isolation valve(s). The capacity shall be adequate

for minimum eight (8) hours continuous operation at full load. Fuel piping

between tank and engine shall be MS ‘C’ class pipes of suitable diameter with

compatible flexible connections (where required), complete with all valves,

clamps, supports, unions and fittings. Any additional safety provisions required

by local fire authority/UGVCL/competent authority (such as double

wall/bunding, flame arrestor, etc.) shall be provided within the quoted

Description Total Qty Unit Rate Rate In Word Rs. Amount

(F) Exhaust System: Heavy-duty residential type exhaust silencer suitable for

CPCB IV+ installation (with DEF/after-treatment system wherever applicable)

along with exhaust piping of required length, bends, supports and flexible

bellow, complete with rain cap, drain arrangement and all accessories. Exhaust

piping shall be thermally insulated/lagged and cladded where required to ensure

personnel safety and to limit heat radiation inside the DG room/enclosure. The

complete exhaust arrangement shall be designed such that engine exhaust back

pressure remains within OEM permissible limits and shall comply with applicable

statutory and safety requirements.

(G) Starting System:

12 V / 24 V DC electric starting system (as per OEM design) comprising starter

motor(s), battery charger/alternator charging arrangement, relays, cabling and

terminals, complete with maintenance-free batteries of suitable Ah capacity to

ensure minimum three (3) consecutive cranking attempts. System shall include

battery isolator and indication of charging healthy/failure. All battery

interconnections shall be with crimped lugs, insulated sleeves and proper

supports, complete in all respects................

(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-

fabricated, weatherproof and corrosion protected, suitable for outdoor

installation, with minimum IP65 protection (or better) for the enclosure body.

Enclosure design shall provide adequate fresh air intake and hot air discharge for

engine radiator and alternator cooling such that the internal temperature rise

remains within OEM limits at full load. Provision shall be made for safe

access/maintenance including lockable doors, viewing window (where provided),

emergency stop access, and cable entry glands. Noise level of the complete DG

set with enclosure shall not exceed 75 dB(A) measured at 1.0 m distance in free

field conditions, in accordance with applicable CPCB requirements. The

enclosure shall comply with CPCB IV+ (or better) requirements and other

applicable local rules/regulations. All louvers, acoustic infill/insulation, fasteners

and sealing arrangements shall be of fire-retardant/industrial grade as per OEM

standard. Any deviation from the specified noise/IP requirements shall be

treated as non-compliance unless explicitly approved by the EIC in writing.

Description Total Qty Unit Rate Rate In Word Rs. Amount

The DG set shall be provided with a durable QR code/label fixed on the

enclosure/control panel, linking to a document repository containing (as a

minimum) approved GA drawings, wiring diagrams, foundation and installation

details, OEM catalogues, operating & maintenance manuals, factory test reports,

type test certificates (where applicable), warranty certificate, geo-tag of

manufacturing location, and rating plate data as per relevant IS/BS/ISO

requirements. The OEM/Contractor shall provide a Remote Monitoring System

(RMS) with minimum one (1) year connectivity (SIM/data plan/server access as

applicable), including dashboard access, user ID/password, and data download

facility. RMS shall, at minimum, capture and report: DG status

(Auto/Manual/Off), start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel

level, battery voltage, alarms/trips with time stamp, and GPS/location (where

supported). All licences/subscriptions required for the stated period shall be

included in the quoted price.

Erection, testing, commissioning and satisfactory performance demonstration

shall be carried out as per site requirements and as directed by the Engineer-in-

Charge. The scope shall include pre-commissioning checks, insulation resistance

tests, no-load and load trials, safety/protection checks, and performance test on

load bank (where directed) with submission of test records at OEM

premises..................

..............The contractor shall provide initial consumables including first fill of

diesel fuel ( 80% of fuel tank capacity at the time handing over ), lubricating oil,

coolant, etc. required for commissioning and the specified tests. The

bidder/OEM shall provide comprehensive warranty/guarantee including repair/

rectify/ replacementof any spare parts, engine, alternator, control panel, RMS,

replacement of battery, enclosure and all accessories( excluding consumable

item like oil, fiter etc.)...................

Description Total Qty Unit Rate Rate In Word Rs. Amount

................ The period of guarantee shall be consided upto defect liability period

complation or releace of final security deposit which ever is later. The

warranty/guarantee shall be start from the date of NOC or handing over whicg

ever is later. covering defects in materials and workmanship. During warranty,

all spares/repairs/replacements and visits required to maintain the DG set in

serviceable condition shall be carried out at no additional cost.including All

necessary statutory approvals, inspections, testing and certification from the

Electrical Inspector/competent authority (including Supply , testing and sealing

of energy meter(s) & CT & meter box wherever applicable) shall be arranged

and obtained by the contractor within the quoted scope and time, at no extra

cost. Required O&M manuals, as-built drawings, warranty certificates and

training to operating staff shall be provided prior to handing over................

....................Factory testing shall be carried out with fuel and load bank at

power factor and the DG set shall be offered for inspection prior to dispatch.

Cost inclusive of Diesel, To & Fro Fair, Lodging boarding etc. of two engineer of

Note: The DG set specifications shall comply with the latest CPCB

guidelines/notifications and all applicable local rules/regulations prevailing as on

the last date of tender submission applicable local rules/regulations prevailing as

on the last date of tender submission

(A) Agency has to provide DG set 50 KVA ,BHP not less than 65.8 BHP with

diesel of 80% of fuel tank capacity , Heavy Duty standard oil M.S./ PVC Barrel

& Diesel Filling hand Pump of required capacity at the time of Handing over. (

(Diesel Engine- cummins, Mahindra, koel, caterpiller) (Alternator- crompton,

stamford, Leroy- Somer)

Executing comprehensive (All-in-All) service & maintenance( Four service per 1.00 Each 72600.00 RS: Seventy Two Thousand

year & breakdown emergencyservice as and when required ) with consumable Six Hundred only

item like Oil filter, cartridge Fuel filter, Element fuel filter, primary filter, fasety

filter, dosing control unit filter, filter head unit, poly V belt, V-belet drive,

volvoline engine oil, Volvoline coolant water etc. as per terms & condition of

288 tender. main agency has to give All-in-All comprehensive maintenance

contract of DG set OEM/Authorised dealer for a period of complation opf defect

liability period or release of find security deposit which ever is later and copy of

this maintenance contract as per annexure and FDR must be submitted with final

Description Total Qty Unit Rate Rate In Word Rs. Amount

...................... Agency has to submit FDR of approved bank of GSPHCL, of

Rs.72600.00 + GST or quoted amount which ever is higher to G.S.P.H.C.L. for

minimum maturity period of Five years in favour of GSPHC, Which will be

released after successful completion of AMC & at the end of defect liability

period. In any case without submitting FDR final bill submission will not be done

DG set agency has to maintain written record of service & maintenance during

defect liability period duly sign by police dept. and submit regularly to

G.S.P.H.C.L. DG set agency has to do maintenance as per terms & condition in

tender. Agency has keep D.G. set for continuous trouble free operation during

defect liability period as per given list ....................

.................... otherwise GSPHCL shall not release the FDR & Final SD.This item

including cost of Three (3) year connectivity (SIM/data plan/server access as

applicable), including dashboard access, user ID/password, and data download

facility for Remote Monitoring System (RMS) ( Excluding first year which is

consider in Dg set item) . This SIM card shall be issused in the name of electrical

agency who has supply & commissing DG set and maintain the record of

performance & maintenance datas of DG set.

2) Checking the alignment and tappet setting.

3) Checking the carbon brushes / AVE.

4) Checking the oil level and replace the oil.

5) Leakages IN/OUT Cylinder.

6) All Electrical wrings including AMF panel if available.

7) Dynamo Setting.

8) RPM setting, Frequency & Voltage Adjustment.

9) Replacing material like fuel filters, gasket, tappet covers, diode

rectifiers, Bridge rectifiers if found defective and in not working

10) Major Overhauling & Top overhauling shall be included in

scope of Agency.

OEM has to Provide fitness certificate at the time of releasing S.D

(For 50 KVA DG Set)

Description Total Qty Unit Rate Rate In Word Rs. Amount

Supply, Installation, testing and commissioning of electric driven 1.00 Each 33838.00 RS: Thirty Three Thousand

booster Terrace pump with automatic operation and consisting of Eight Hundred Thirty Eight

following complete in all respects as required.( Terrace Pump ) (a) only

Horizontal type, Singlestage, End Suction pump ,Closed Coupled

Pump of cast iron body & bronze impeller with stainless steel shaft,

mechanical confirming to IS : 1520 (b) 7.5 HP squirell cage induction

motor TEFC type............................

............................ suitable for operation on 415 volts, 3 phase, 50 Hz

AC supply with IP 55 class of protection for enclousure, horizontal

foot mounted type with Class-'F' insulation, conforming to IS-

325.(C) M.S fabricated common base Plate, coupling, coupling

guard, foundation bolts etc. as required (d) Suitable Cement

Concrete Foundation duly plastered and anti vibration pads. (The

All Required Technical Specification And Test Certificate Shell Be

Submitted TO Local Fire Authority For Approvel) 450 LPM AT

Supplying & erecting approved make motor control cubical panel 1.00 Each 8811.00 RS: Eight Thousand Eight

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder Hundred Eleven only

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

for R- Y - B phases, overload relay, Automatic water level

290 controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay &

contactors will be of L & T, Siemens or BCH make only. Rating of

DOL Starter Panel as per Terrace Fire Pump Requirement

Supply, Installation, Testing and Commissioning of ABS Shock 4.00 Each 380.00 RS: Three Hundred Eighty

and Vibration Resistant On/Off Push Button switch for Fire only

hydrant Pump Remore operation, with all mounting accessories

complete with Junction Box for mooting on Surface [Test certificate

must be submitted] (Ravel,ASES,Apollo Make Only )

Description Total Qty Unit Rate Rate In Word Rs. Amount

Providing and erecting PVC insulated PVC Sheathed flat flexible 50.00 Mtr. 171.00 RS: One Hundred Seventy

copper cable ISI marked approved make of size with all require One only

accessories [d] 3 Core x 6 Sq. mm for Jockey pump

Providing and erecting PVC insulated PVC Sheathed flat flexible 50.00 Mtr. 484.00 RS: Four Hundred Eighty

293 copper cable ISI marked approved make of size with all require Four only

accessories [f] 3 Core x 16 Sq. mm for main pump

Supply and laying of 4 core x 1.5 sq.mm Copper Armourd cable 100.00 Mtr. 107.00 RS: One Hundred Seven

with all require accessories [From fire panel in pump room to fire only

duct for ON-OFF switch connection for fire system]

Supplying and erecting Flexible PVC insulated multistrand 1200.00 Mtr. 39.00 RS: Thirty Nine only

multicore 1.1 kv grade ISI marked copper wires of following size to

295 be erected as directed.For 1.50 Sq.mm 2 core round PVC sheathed.

having insulation colour RED and BLACK for Fire Alarm System.

Supplying, installation, testing & commissioning of intelligent analog 40.00 Each 2415.00 RS: Two Thousand Four

addressable photothermal detector having IS-11360-1985 or BS 5446 Part I- Hundred Fifteen only

1977 & Part VII –1985 (VdS approved) or NFPA72 ( LPCB/ UL/ULC/FM approved)

with Latest ammendment complete with mounting base & Plate complete as

required.( Make:- Edwards, Notifier, Siemens , Schneider, GST )

Supplying, installation, testing & commissioning of intelligent addressable 2.00 Each 2288.00 RS: Two Thousand Two

thermal detector with rate of rise cum fixed tempreature thermistor having IS- Hundred Eighty Eight only

2175 - 1988 or BS-5445 ( EN 54) Part 5 –1977(VdS approved) or NFPA72 (LPCB/

UL/ULC/FM approved) complete with base & plate as required.( Make:-

Edwards, Notifier, Siemens , Schneider, GST )

Supplying, installation, testing & commissioning of addressable manual call 4.00 Each 3271.00 RS: Three Thousand Two

point having IS or BS (EN 54) (Vds approved) or NFPA 72 (LPCB/ UL/ULC/FM Hundred Seventy One only

approved) with Latest Amendment complete as required ( Make:- Edwards,

Notifier, Siemens , Schneider, GST )

Supplying, installation, testing & commissioning of addressable Hooter cum 4.00 Each 2966.00 RS: Two Thousand Nine

strobe having IS or BS (EN 54) (Vds approved) or NFPA 72 (LPCB/ UL/ULC/FM Hundred Sixty Six only

approved) with Latest Amendment complete as required. ( Make:- Edwards,

Notifier, Siemens , Schneider, GST )

Supplying, installation, testing & commissioning of response indicator on 5.00 Each 228.00 RS: Two Hundred Twenty

surface/recessed MS Box having two LED, metallic cover complete with all Eight only

connections etc as required. ( Make:- Edwards, Notifier, Siemens , Schneider,

Description Total Qty Unit Rate Rate In Word Rs. Amount

SITC of Microprocessor based Net-workable Analogue Addressable Fire 1.00 Each 93005.00 RS: Ninty Three Thousand

Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 Five only

and approved by approved By LPCB &vds . The Fire Alarm Control Panel

shall have inbuilt two loop. The Panel must have large graphic display. The

Panel must also have the capability to take Addressable Intelligent Wired