Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC KRISHNAKRIPA KOTTARAKARA | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L4 | |
| 3 | Rejected-Technical HARIBHAVAN NORTH ARIYAD P O ALAPPUZHA | - | Rejected-Technical L2 | |
| 4 | Rejected-Technical CHANGANACHERRY GENERAL ELECTRICAL WORK | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | M Y ASSOCIATES L3 | Biju E.M L4 | HARISH AND CO L2 | K K Associates L1 |
|---|---|---|---|---|---|---|---|
| 1.00Solar lamps & Accessories. | |||||||
| 1.00 | OD332868/2025-2026:Conveyance, installation, testing and commissioning of solar post-top lantern on the existing pipe/ pole as required. Die Cast Al Post top luminaire shall have highly efficient mid power white dimmable LEDs with System lumen output of Minimum 5400 Lumens , and a typical corelated color temperature of 4000K with CRI>70 and lenses with efficient Bat Wing optics designed for efficient light distribution. The Lumens Output of the Fitting shall be of Minimum 5400 Lumens & wattage should not be more than 30W with PDC Housing with LM79 Report from Any NABL Accredited Lab. The Efficacy of Luminaire shall be of Minimum 180 Lumens / Watts at System level after all losses in Order to optimize required PV / Battery Sizing to be design as per 2 nights autonomy along with suitable Dimming profile. Luminaire should be with 12.8V 18AH LiFePo4 battery and 35Wp Mono Panel. External charging port should be provided ensuring easy battery charging for long transpiration / storage. Battery with 2000 Cycles life for ensuring long system life. Life of Product will be 50000 Burning hours life class. Intelligent smart power mode to maximize autonomy. Housing color should be Black, IP65 and IK08 for weather resistant and vandal proof installation.The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED. Detailed Technical Specs Reports along with IEC,BIS,EN Standards to be submitted for Technical Evaluation. {Make: Signify PHILIPS Model BPP750 LED54 NW AIO or equivalent) | 32 | each | 75,000 ₹24,00,000 | 84,710 ₹27,10,720 | 68,000 ₹21,76,000 | 62,000 ₹19,84,000 Lowest |
| 1.00 | OD333238/2025-2026:Supply, conveyance and erection of the following sizes GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. 65mm dia G.I. Pipe as per IS/1239 ISI MARKED C Class (heavy) | 30 | metre | 700 ₹21,000 | 784.25 ₹23,527.5 | 600 ₹18,000 Lowest | 700 ₹21,000 |
| 1.00 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. | 9.07 | cum | 450 ₹4,082.4 | 509.66 ₹4,623.64 | 400 ₹3,628.8 Lowest | 455 ₹4,127.76 |
| 1.00 | 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). | 3.24 | cum | 10,900 ₹35,316 | 12,277 ₹39,777.48 | 9,000 ₹29,160 Lowest | 11,000 ₹35,640 |
| 1.00 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels | 19.44 | sqm | 400 ₹7,776 | 462 ₹8,981.28 | 300 ₹5,832 Lowest | 500 ₹9,720 |
| 1.01 | OD335827/2025-2026:Supply installation testing commissioning of of Decorative pole of 4.0M in height above the ground level made out of GI, tubular pole washed and primered (ASTM A123, with minimum average GI coating of 65mm.), having two sections, bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 300mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 450 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The column & brackets to be painted in MRF antique copper & golden finish marine treatment. The pole shall be of composite/ construction designed to /wind load/ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The base pipe shall be sourced only from Tata Steel or JSW. make of Keselec/Wipro/Crompton/Bajaj | 32 | no | 14,200 ₹4,54,400 | 15,949.5 ₹5,10,384 | 12,500 ₹4,00,000 Lowest | 14,300 ₹4,57,600 |
Tender Value
₹29.4 L
EMD Value
₹50,000
Closing Date
13 Mar 2026, 5:00 pmClosed
EXECUTIVE ENGINEER
PWD ELECTRICAL DIVISION ALAPPUZHA
GENERAL-Improvements to Pathanamthitta town in Aranmula LAC-SITC of 30W Integrated Solar Post Top Luminaires along the Ring Road Walkway St. Peters Junction to Aban Junction -General Electrical Work
2026_PWD_844648_1
PWD/BLDG/19194/2025-2026
Open Tender
Electrical Works
Item Rate
120 days
Pathanamthitta
Please refer Tender documents.
11 documents required · 11 mandatory
₹2,760
₹50,000
20 May 2026
6 Mar 2026
16 Mar 2026
6 Mar 2026
13 Mar 2026
6 Mar 2026
Solar lamps & Accessories.
OD332868/2025-2026:Conveyance, installation, testing and commissioning of solar post-top lantern on the existing pipe/ pole as required. Die Cast Al Post top luminaire shall have highly efficient mid power white dimmable LEDs with System lumen output of Minimum 5400 Lumens , and a typical corelated color temperature of 4000K with CRI>70 and lenses with efficient Bat Wing optics designed for efficient light distribution. The Lumens Output of the Fitting shall be of Minimum 5400 Lumens & wattage should not be more than 30W with PDC Housing with LM79 Report from Any NABL Accredited Lab. The Efficacy of Luminaire shall be of Minimum 180 Lumens / Watts at System level after all losses in Order to optimize required PV / Battery Sizing to be design as per 2 nights autonomy along with suitable Dimming profile. Luminaire should be with 12.8V 18AH LiFePo4 battery and 35Wp Mono Panel. External charging port should be provided ensuring easy battery charging for long transpiration / storage. Battery with 2000 Cycles life for ensuring long system life. Life of Product will be 50000 Burning hours life class. Intelligent smart power mode to maximize autonomy. Housing color should be Black, IP65 and IK08 for weather resistant and vandal proof installation.The Successful bidder shall submit LM 79 & LM 80 of the Fitting and LED. Detailed Technical Specs Reports along with IEC,BIS,EN Standards to be submitted for Technical Evaluation. {Make: Signify PHILIPS Model BPP750 LED54 NW AIO or equivalent)
OD333238/2025-2026:Supply, conveyance and erection of the following sizes GI pipe in single section for post top lantern of all types on concrete base (excluding charges for concrete base and excavation) and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. 65mm dia G.I. Pipe as per IS/1239 ISI MARKED C Class (heavy)
14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.
14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).
14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
OD335827/2025-2026:Supply installation testing commissioning of of Decorative pole of 4.0M in height above the ground level made out of GI, tubular pole washed and primered (ASTM A123, with minimum average GI coating of 65mm.), having two sections, bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 300mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm with 4 Nos. of J bolts (GI) of size 16 mm diameter x 450 mm length. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The column & brackets to be painted in MRF antique copper & golden finish marine treatment. The pole shall be of composite/ construction designed to /wind load/ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. The base pipe shall be sourced only from Tata Steel or JSW. make of Keselec/Wipro/Crompton/Bajaj
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1426121.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1426121.xls
BOQ • 0.30 MB
SBD.pdf
Tender Documents • 2.36 MB
Accepted_List_of_Materials.pdf
Tender Documents • 0.37 MB
Special_condition_Electrification.pdf
Tender Documents • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .