Renovation of Community Hall Phase I at TNPL Unit I

Amount

DISMANTLE BRICK MASONRY IN GROUND FLOOR AND DISPOSE OFF WITHIN A INITIAL LEAD OF 40 MTR.

DISMANTLING OF MUDMAT CONCRETE, PCC1:5:10, GRANO FLOORING, ETC., USING BREAKERS AND DISPOSE OFF WITHIN A LEAD OF 2 KM DISTANCE AS DIRECTED.

REMOVAL OF EXISTING MOSAIC TILES WITH BED MORTAR FOR FLOOR AND SKIRTING USING CONCRETE BREAKER AND DISPOSING THE SAME TO OUT SIDE THE COLONY PREMISES AND FILL IN LOW LYING AREA.

DISMANTLING OF EXISTING MS STRUCTURE, PLATFORM, ROOF TRUSS, ETC., WITHOUT DAMAGE AND HAND OVER TO TNPL STORES/DEPARTMENT FOR REUSE INCLUDING CONSUMABLES, TRANSPORTATION, ETC., COMPLETE AT ALL LEVELS.

DISMANTLING OF EXISTING ROOF AND CLADDING SHEET (GALVALUME / AC SHEET) WITHOUT DAMAGE AND HAND OVER TO TNPL STORES/DEPARTMENT FOR REUSE INCLUDING TRANSPORTATION, ETC., COMPLETE AT ALL LEVELS.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR, 12MM THICK IN CM 1:4 INCLUDING NECESSARY SCAFFOLDING AND CURING ETC., COMPLETE FROM FFL TO +7.00 MTR LEVEL.

SUPPLYING AND FIXING OF CERAMIC FLOOR TILES ANTI SKID OF SIZE 300 X 300MM X 8MM THICK OF APPROVED MAKE AND SHADE WITH BED MORTAR IN CM 1:3, 20MM THICK TO DESIRED SLOPE AND POINTING THE JOINTS WITH TILE MAT COMPOUND, CURING, ETC., COMPLETE AT ALL LEVELS FOR TOILETS.

SUPPLYING OF WALL TILES OF APPROVED MAKE, SIZE AND DESIGN / SHADE AND FIXING THEM IN POSITION FOR WALLS WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MAT COMPOUND AS DIRECTED BY ENGINEER INCHARGE.

PROVIDING AND FIXING OF UPVC SLIDING WINDOW OF SIZE 1.50 X 1.20. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 62MM X 60MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE WINDOW SHUTTER COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLY AND FIXING OF MOSQUITO NETS IN EXISTING ALUMINIUM LOUVERED VENTILATORS AND WINDOWS AS DIRECTED BY ENGINEER IN CHARGE INCLUDING DRILLING OF SCREWS AT ALL LEVELS, LABOUR ETC., COMPLETE

SUPPLY AND FIXING OF PVC STANDARD DOOR AS PER SKETCH. 4 ( X ) MODEL OF APPROVED COLOUR AND MAKE.

SUPPLYING AND FIXING OF ROLLING SHUTTER (PULL PUSH TYPE) MADE OUT OF 12 GAUGE MS SHEET AND FIXING IN POSITION INCLUDING FIXING OF HOOD, GUIDE RAIL, CLAMP, LOCKING ARRANGEMENTS, LABOUR CHARGES AND APPLY ONE COAT OF RED OXIDE PRIMER AND TWO COATS OF SYNTHETIC ENAMEL (INDUSTRIAL QUALITY) OF APPROVED COLOUR ETC., COMPLETE AT ALL LEVELS.

PROVIDING TEMPORARY PLATFORM BY USING PIPES / SCAFFOLDING MATERIAL AND LAYING OF WOODEN PLANKS TO REQUIRED HEIGHT PROVIDE TARPAULINE OVER THE PLATFORM TO AVOID FALLING OBJECT ABOVE THE MACHINERY, ALSO REMOVE THE TEMPORARY PLATFORM AFTER COMPLETION OF THE WORK AS PER ENGINEER INSTRUCTION AT ALL LEVELS.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

SUPPLY AND FIXING OF EWC WHITE COLOUR WITH P OR S TRAP OF PARRYWARE OR EQUIVALENT MAKE AND FIXING OF PLASTIC LOW LEVEL TANK WITH INTERNAL FITTINGS OF SLIMLINE MAKE. ALSO FIXING OF CP ANGLE VALVE OF APPROVED ISI MAKE WITH CP INLET CONNECTION TO LOW LEVEL TANK. THE PLASTIC SEAT COVER WHITE COLOUR SHALL BE FIXED OF COMMANDER OR EQUIVALENT APPROVED MAKE. RATE INCLUDES COST OF ALL MATERIALS, NECESSARY CIVIL WORKS LIKE MAKING OPENING IN THE EXISTING WALL, TAPPING FROM THE EXISTING WATER LINE FOR INLET TO THE TANK, LABOUR CHARGES ETC., COMPLETE IN GROUND AND FIRST FLOOR.

PROVIDING AND FIXING IWC OF PARRYWARE / HINDUSTAN OR ANY OTHER APPROVED MANUFACTURE OF ORISSA PAN COMPRISING WG EARTHENWARE PAN 580 MM WITH "S" OR "P" TRAP, 10 LITRES PLASTIC HIGH LEVEL FLUSHING CISTERN WITH INTERNAL FITTINGS, 32 MM PVC FLUSH PIPE CONCEALED IN WALL OR AS DIRECTED AND 15MM C.P. ANGLE COCK, PVC CONNECTION 15 MM ETC. COMPLETE.

SUPPLYING AND FIXING WHILE GLAZED EARTHEN WARE WASH BASIN OF SIZE 550 X 400MM OF APPROVED MANUFACTURE WITH CENTRAL 15MM CP PILLAR TAP OF APPROVED MAKE WITH CI BRACKETS, WOODEN PLUGS 15MM PVC CONNECTION, 15MM CP ANGLE COCK, 40MM CP WASTE COUPLING WITH CHAIN AND PLUG AND PVC DRAIN PIPE WITH NECESSARY COUPLINGS ETC. COMPLETE.

SUPPLY AND FIXING OF CP HEALTH TAP TWO WAY 1/2" SIZE OF APPROVED MAKE INCLUDING UPVC HOSE AND ALL NECESSARY ACCESSORIES COMPLETE AS PER INSTRUCTIONS OF ENGINEER IN CHARGE.

SUPPLY AND FIXING 75 MM DIA PVC PIPE OF APPROVED IS MAKE 4 KG/ SQ.CM WITH NECESSARY GI CLAMP AT 1 MTR INTERVAL WITH NECESSARY SPARES LIKE COUPLING, BEND, ELBOW, ETC., TO SUIT THE SITE CONDITIONS AS DIRECTED.

SUPPLY AND LAYING OF 110MM DIA FINOLEX MAKE PVC PIPES WITH 'IS' APPROVED MAKE INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING OF STANDARD MAKE, ETC., COMPLETE AT ALL LEVELS. (PRESSURE CAPACITY : 4 KG/ SQ.CM)

SUPPLY OF 25MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

SUPPLY OF 20MM DIA THREADED U.PVC PIPE 40 SH OF FINOLEX MAKE AND LAYING IN POSITION INCLUDING NECESSARY SPECIALS LIKE BEND, ELBOW, CLAMPING, COUPLING INCLUDING NECESSARY EARTH WORK IN CASE OF UNDER GROUND LINE AND CONCEALING WORKS WHEREVER REQUIRED ETC., COMPLETE.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - CARPENTER.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - MASON.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING WELDING WORKS IN PIPE LINES, STEEL STRUCTURES, ETC., COMPLETE AT ALL LEVELS - WELDER

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL AND STRUCTURAL WORKS – HELPER FOR MASON / PLUMBER / CARPENTER / FITTER / WELDER, ETC.,

PROVIDING ANTI-TERMITE TREATMENT AS PER IS 6313 WITH THE TERMITICIDES CURRENTLY ALLOWED UNDER THE INSECTICIDES ACT 1968 BY THE INSECTICIDES BOARD INCLUDING COST OF TERMITICIDES OF IS STANDARD, LABOUR, ETC., THE CHLOROPYRIFOS OR IMIDACCOPRID MIXED WITH WATER AS PER MANUFACTURER SPECIFICATION - DRILLING HOLE 12MM DIA AT THE JUNCTION OF FLOOR & WALLS, 150MM DEEP AT 300MM INTERVAL IN THE CONCRETE FLOOR INSIDE / OUTSIDE AS THE CASE MAY BE TO REACH THE SOIL BELOW AND FILL DILUTED CHEMICALS.

Bidder Name

Amount in Words

MAARUTHI BUILDERS

KUMARAN KUDIL CONSTRUCTIONS

R.GANESAN

K PALANISAMY

R.GANESAN

KUMARAN KUDIL CONSTRUCTIONS

MAARUTHI BUILDERS