Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
| 2 | Accepted-Technical LAXMI BAZAER TEHSIL JOGINDERNAGAR DISTT MANDI HP | MANDI | HIMACHAL PRADESH | 175001 | Accepted-Technical Fulfil eligibility Ceriteria |
| 3 | Accepted-Technical | Accepted-Technical Fulfil eligibility Ceriteria |
Tender Value
₹3.8 L
EMD Value
₹7,650
Closing Date
3 Jul 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Baijnath District Kangra HP
Replacement testing and commissioning of ATS starter of 75 HP with allied accessories etc under PDNA
2026_HPIPH_137659_1
3297-3345 dated 25-06-2026
Open Tender
Pumps/Motors
Item Rate
30 days
Baijnath
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
Yes
Executive Engineer
₹7,650
7 Jul 2026
27 Jun 2026
4 Jul 2026
27 Jun 2026
3 Jul 2026
27 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of 75.00 HP ATS (Auto Transformer Starter ) Heavy duty of standard make such as MEI / Havels / AVON / Crompton / Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 440 volts capacity and ampere meter of capacity 20 to 32 ampere of standard make complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 1 | Nos. | - | - |
| 2 | Providing & laying PVC insulated jointless, flat water proof 3 core copper cable 35mm2 of Siemens / Finolex / Grandlay / Gloster make conforming to BIS:1554 (Part I)-1988 or latest with up to date ammendments of suitable size for the pump sets offered(one cable carrying all three phases) including all other electrical equipment /accessories such as thimbles,flexible pipe, solder, nuts & bolts cable glands etc. laid in pipes or trenches under floor. complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 12 | Mtr | - | - |
| 3 | Providing and fixing of copper thimble of 250 Amp. Size complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 12 | Nos. | - | - |
| 4 | Providing and fixing of transformer oil complete fixing at site complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 120 | Liters | - | - |
| 5 | Providing and fixing double flanged swing type cast steel Sluice valve / Gate Valves of Kirloskar / Leader make having size of following dia Class 300 Material CSS , BS: 1414/API 600 equal to delivery of pump and capable of with standing nominal seat pressure (Latest addition) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
65 mm dia. | 1 | Nos. | - | - |
| 6 | Providing and fixing of double flanged cast steel non return valve / Check Valves of following dia Kirloskar / Leader make make having size of following dia Class 300 Material CSS , BS: 1414/API 600 equal to delivery of pump and capable of with standing nominal seat pressure (Latest addition) complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
65 mm dia. | 1 | Nos. | - | - |
| 7 | Providing and supplying of Cast Iron double flange Sluice valve of following diameter heavy duty PN-1.6 of Kartar / Kirloskar / Leader make including cost of nuts bolts rubber sheet 4mm thick entire carriage and welding of flange T-5 of both end in double end in double layerof GI Pipe testing of joints at site confirming to IS:14846 latest with upto date ammendaments complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge .
80 mm dia. | 1 | Nos. | - | - |
| 8 | Providing and laying column assembly 65 mm with double flange table-17 GI/MSERW pipes of suitable size (layout to be approved by the Engineer-Incharge) for suction delivery and common header considering site requirements and NPSH required/available.The pipe sizes for suction and delivery shall as per the requirement of offered pump and common header shall be equal to dia of rising main including tapers. flanges, bends, rubber gaskets, 3 mm thickness as per IS:2712-1979 and required number of nuts and bolts upto 5 metres from the outer wall of the pump house as per layout approved by the Engineer-Incharge as per IS:1364-1983 . The pipes material shall conform to relevant BIS codes and capable of with standing field test pressure equal to 1.5 times the operating pressure.complete in all respect in all leads and lifts as per the direction and Entire to the Satisfaction of Engineer in Charge . | 1 | Job | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.68 MB
TC.pdf
Tender Documents • 0.05 MB
BOQ_203770.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .