Repairing of electrical works at Block Animal Health Centre (BAHC), Sonarpur South 24 Parganas.

Amount

Dismantling the existing old & damaged electrical wiring, switch board(approx-10 sets), power plugs(approx-15 sets ),computer board(approx-6 sets), fixtures (approx-30),Ceiling fans(approx-12pcs),Wall bracket fans(approx-04 pcs),exhaust fans(approx-3 pcs),SPNDBs(approx-02 sets),PDBs(approx-01 sets), all the entire building(approxArea--1500sqft) etc. from its own position with own tools & tackles, manpower and mending good the damages as per G.S.(Salvage value of less cost materials)

Supplying and fixing 415V, 100A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment 4way- 1 no. 415 V 63 A. FP MCCB (Input) & 02 no. 415 V. 40 A. TP MCB, 6 nos. 16-32 SP MCBs as required(outgoing) (Make:Legrand/ Siemens/ L&T/ABB).

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment i) 6 way HTPN DB - 1 no. ii) I/C - 415V, 63A FP Isolator -1 no. iii) O/G - 240V, 16-32A SPMCB-18 nos. [Make - Legrand/Siemens/Havells/ABB] [For AC & Power Socket]

Supplying and fixing 4way double door sheet steel (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

Supplying and fixing 6way double door sheet steel (16SWG), powder coated cable end box for TPN DB Horizontal enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

S&F 250V, (6-16)A per way, Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. i) 2+10 way SPN DB - 1 no. ii) I/C - 240V, 40A DP Isolator - 1 no. iii) O/G - 240V, 6-16A SP MCB - 10 nos. [Make - Legrand/Siemens/Havells/ABB]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. On Board

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm dia, 3 mm thick Polythene pipe, without earth continuity wire, by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles, as per GS.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes including S &F flexible polythene pipe and making necy. connection as required. a)4 x 126/0.4 (16 sqmm) [From Cut out to Main switch ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [ AC]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4.0 sqmm) ECC (For SPNDB)

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC( For VTPN to HTPN DB)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [ AC]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4.0 sqmm) ECC (For SPNDB)

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC( For VTPN to HTPN DB)

4 x 126/0.4 (16 sqmm)

Supply & Fixing 2 nos. 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (6A+6A Socket Board)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(Power Pt )

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.. (For AC)

Supply & Fixing 240V, 25A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and delivery of Single LED Fitting (18Watt,230VAC, 50Hz, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC. 105 ≤ Luminious efficacy < 120 Lumen/watt. The LED Luminaries & accessories should have BEE certification. [Make: Crompton/Philips/havells or equivallent]

Supply and delivery of Twin LED Fitting (18Watt, 230VAC, 50Hz, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube, as directed by EIC. 105 ≤ Luminious efficacy < 120 Lumen/watt. The LED Luminaries & accessories should have BEE certification. [Make: Crompton/Philips/havells or equivallent]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required

S&D of 240V 36 watt, recess mounted 2'x2' LED fittings with glare-free uniform illumination, suitable for 2'x2' grid ceiling with CCT ( 5700-6500) & with minimum luminious efficacy ≥105 & <120 lumen/watt or better. The LED Lamp and accessories shall have BEE Certification. [Make: Crompton/Philips/havells or equivallent]

Fixing only full 2ft x2ft Glow light fitting on false ceiling after cutting the false ceiling incl. necessary connection and mending goods the damages to original finish.

Supply & Fixing of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp as per EIC (Make-Havells/ Philips/Crmpton/Wipro/Jaguar)

Supply & delivery of 1200mm sweep 230V AC Ceiling fan incl. Blades, canopy etc. with 18" down rod (14SWG), Fork (10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc. with safety wire & P2 type capacitor as directed by EIC with complete accessories. [Make: Orient/Crompton/USHA]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. As per GS

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) As per GS

Supply & Delivery 230V, 50 Hz, 400mm sweep full metal body , heavy duty AC wall bracket fan (Make: Orient / Havells / EPC) complrte with all accessories.

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20PVC insulated flexible copper wire 0.5 mt. length

Supply and delivery of 230V 230mm (9") Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty, Usha, Crompton, Bajaj or equiv Make]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: As per GS

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

a) For 23 cm (9") Exhaust fan

Supply & Delivery of 240V, 8400 Lumens (minimum) LED Street Light Fittings with IP 66/ 67, IK 10 protection including 10 KV SPD with CCT 3000K/5700K & Luminious efficacy 120 Lumen/Watt minimum or better, burning hour 100000 at L70850, LED Balast should with stand 440V for 8 hours. The LED luminaires and accessories shall have BEE Certification & LED should be with lens (Light efficacy will not get depriciated less than equal to 70% of the rated value over the lifetime of the Luminaries) (Make: Havels / Philips(Signify) / WIPRO/ Crompton) (Manufacturer warranty should not less than 3 years)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply, Delivery & installation of LED Sign Board (as per inscription given by the authority during the execution of work) of Size 10'x4' sq ft with front side 3mm thick A-1 quality ACP Blue colour (AD-41) board capable of preventing avoid wind pressure which is also to be attached to M.S. structure(front/back side of board of suitable size MS angle/ MS hollow square/rectangle bar by drilling hole incl. S&F special type steel nuts, bolts and washer). The matter of the LED sing board should be in English/Bengali alphabets made of laser cutting box type by white colour letter making in the shape of male/female incl. all fixing facility, from 3mm thick imported white acrylic sheet including jointing/setting the same part by part and fixing on the board by using chloroform/machine screw etc. is to be fixed on ACP board (on front) incl. S&F SMD module (Best Quality make) of required quantity for illumination of.(Male & Female) letters including necessary interconnection & SMPS. The matter will be as per requirement of competent authority and as per direction of EIC.(40 sqft *1nos of board), incl Erection of glow sign board on wall with 4 nos.L Shape Angle 8'long x 2" Width x 3mm thickness with nut,bolts etc. as directed by EIC.

Making necessary arrangement for fixing the above LED board by making necessary supporting structure to resist storm by S&F of 40mmx40mmx5mm M.S. angle incl.making brick foundation at on height of 5ft from roof level incl. all fixing accessories including providing necessary fixing materials. Incl. Charges for making heavy type scaffolding arrangement hiring materials and removing after work as required.

S&F of 250V double door AC Timer DB [equivalent of 2+10 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCB ('C' curve 10KA), 1 no. 6-25A SP MCB ('C' curve 10kA), 1no. Programmable Digital time switch-24 hrs with minimum switching of 15 minutes and 1 no. 18A/25A 2-Pole power contractor with inner plate & 1 no. 25A Modular starter on outer plate and internal wiring by suitable size of Cu wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC. [Make-ABB/L&T/Crabtree]

Supply & Delivery 1.1KV grade Al/XLPE/Ar./PVC cable as per choice of EIC. (Make - Polycab / Havells / RR Kabel / Gloster )

4Cx 25 sq.mm ( Main Switch to VTPN DB)

2C × 6 sqmm (For Compound Light)

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. ( Main Switch to VTPN DB)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (for Compound Light)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4Cx 25 sq.mm.

2C × 6 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Cx25 sq.mm

2C × 6 sqmm

Supply, Installation, Testing & commissioning of 1Ph/1Ph, IGBT based, DSP controlled, PWM technology double conversion true Online 3KVA High frequency UPS system with 12V SMF battery to provide 60Mints backup & battery interconnecting cables. Battery: 4992VAH (12x26x16) Battery (Make: Exide/Numeric/APC/Power One/Emmerson) (For Male ward,Labour room,OT room)

Cost of Transportation charges of Batteries and online UPS machines from Company store or workshop to site incl. Loading and Unloading and position all batteries and UPS machines on Racks as per direction of E.I.C. incl. necessary interconnections by Co's own tools & tackles as per direction of E.I.C..

Cost of Making suitable size of floor mounted Rack by 40x40x6 mm "L" type MS angle incl. painting by 2 coat of Synthetic Enamel Paint over one coat of RO Primer as per direction of E.I.C. for holding 1 set of batteries and 1 no. UPS incl. Loading, unloading and Transportation cost, etc..

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By ISI Medium GI Pipe

Excavation of soil for installation of Earth Electrode and filling & ramming, for Soft Soil, as per GS.

S&F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd., as per GS.

Connecting the equipments to earth busbar incl. S&F 2x8 SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS.

Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity - 6.5 kW (Minimum) Minimum ISEER - 3.8, BEE level - 3-Star(min)[1st July22 to 31st December 2025] IS Compliance - IS-1391(Part-I & Part-II) with all amendment Refrigerant - R410A/R32 Compressor - Rotary/Scroll (Fixed/Variable speed) Evaporator & Condenser Coil - Copper Operating outdoor temperature - 48ºC and above Air Flow: 800 CFM (Minimum) Power supply -230V, 50Hz (±tolerance asper applicable standard),as directed by EIC. The scope of work is also includes supply and fixing of the following: (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape - 3 mtr (ii) Necessary 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr and 230V, 25A, 3pin plug top with indicator (Anchor/North West/Legrand/Havells) [Make: General/Daikin/Mitsubishi Electric/Blue Star/Voltas/Carrier]

Supply & Delivery of High-wall Split-type Air-Conditioner having following specification: Cooling Capacity - 5.0 kW (Minimum) Minimum ISEER - 3.8, BEE level - 3-Star(min)[1st July22 to 31st December 2025] IS Compliance - IS-1391(Part-I & Part-II) with all amendment Refrigerant - R410A/R32 Compressor - Rotary/Scroll (Fixed/Variable speed) Evaporator & Condenser Coil - Copper Operating outdoor temperature - 48ºC and above Air Flow: 600 CFM (Minimum) Power supply -230V, 50Hz (±tolerance asper applicable standard),as directed by EIC. The scope of work is also includes supply and fixing of the following: (i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape - 3 mtr (ii) Necessary 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr and 230V, 25A, 3pin plug top with indicator (Anchor/North West/Legrand/Havells) [Make: General/Daikin/Mitsubishi Electric/Blue Star/Voltas/Carrier]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including Supply of required Refrigerant, S&F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm MS angle iron frame for outdoor unit (or arrangement recomended by Manufacturer), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC.

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines. (i) Supply & Fixing of extra refrigerant pipe(as requisite dia) with nitrile rubber insulation and wrapping tape [each mtr Refrigerent pipe will include cost of 1 metre liquid pipe line and 1 mtr gas pipe line of required dia and other accesories as required].

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines. i) 2.5 sqmm ,3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster)

Supply & laying Soft Drawn PVC Drain Pipe 19mm dia with proper supports & brackets as per direction EIC. (Make: Suprime/Oriplast)

Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning.

ELECTROMAX (BID ID -6719337)

KABIR ENTERPRISE (BID ID -6731303)

M/S SAMRIDDHI ELECTRO & CO. (BID ID -6730131)

MINU ELECTRICALS (BID ID -6736919)

BHARAT INFOCOM (BID ID -6715912)

PUSPA ELECTRIC (BID ID -6719359)