Providing E.I. work in construction of building for Dr. G.S. Khush Institute of Genetics, Plant Breeding and Biotechnology at PAU, Ludhiana

Amount

A. ELECTRICAL ACCESSORIES S/E of LED Tube light highly durable surface mounted with T-8 LED, 20 watt Tubular Lamp and decorative end caps etc. ,with 2 year onste warranty ,complete (Fitting & Tube lamp ) in all respect as desired by Engineer-in-charge (Make: Crompton / Havells/ Wipro/Phillips)

S/E of Energy Saving LED Street Light 60w luminaire with system efficiency 110Lm/watt Aluminum PDC housing, with powder coated , IP 66 Protection, Fiberglass insulated multi strand wire, Covering heat resistant toughened glass. High bright white power LED Surge Protection Device should be Separate, installed in Luminaries up to 10KVwith 2 Year on site warranty,complete set along with all required accessories as desired by Engineer -In Charge at site. (Make Crompton/Wipro/Havells/Phillips)

S/E of Energy Saving LED Street Light 90w luminaire with system efficiency 110Lm/watt Aluminum PDC housing, with powder coated , IP 66 Protection, Fiberglass insulated multi strand wire, Covering heat resistant toughened glass. High bright white power LED Surge Protection Device should be Separate, installed in Luminaries up to 10KVwith 2 Year on site warranty,complete set along with all required accessories as desired by Engineer -In Charge at site. (Make Crompton/Wipro/Havells/Phillips)

S/E of vetilator plastic Exhaust Fan10'' complete in all respect with required fixing arrangements, as desired by engineer In charge (Make: USHA/Crompton/Havells)

S/E of Exhaust Fan12'' complete in all respect with required fixing arrangements, as desired by engineer In charge(Make: USHA-Turbo LD DBB /Crompton-TransAir/Havells)

S/E of Heavy Duty Exhaust Fan18'' complete in all respect with required fixing arrangements, as desired by engineer In charge (Make: USHA/Crompton/Havells/GEC)

S/E of ceiling fan 56" with required fixing arrangements, as desired by engineer In charge (Make: Crompton greaves- High Speed/USHA- striker,/Havell's-XP)

S/E of ceiling fan 48" with required fixing arrangements, as desired by engineer In charge (Make: Crompton greaves- High Speed /USHA- striker, /Havell's-XP)

Supply & Erection of 600mmx600mm 36watt recessed mounted LED Fixture with full diffuser with minimum lumens efficiency of 100 Lm/watt with APFC constant current driver for proper driving of LED. The input voltage range shall be150 V to 270V.The LED driver shall be of isolated type with constant current and constant voltage topology to ensure optimum driving of LEDs .The LED driver shall be have minimum 2.5 KV of surge protection,complete in all respect as desired by Engineer-in-charge at site. (Make: Crompton/Wipro/Havell's/Phillips)

Supply & Erection of 300mmx600mm 40watt Surface/Recessed mounted LED Fixture with full diffuser with minimum lumens efficiency of 100 Lm/watt with APFC constant current driver for proper driving of LED. The input voltage range shall be150V to 270V. The LED driver shall be of isolated type with constant current and constant voltage topology to ensure optimum driving of LEDs. The LED driver shall be have minimum 2.5 KV of surge protection,complete in all respect as desired by Engineer-in-charge at site.(Make: Crompton/Wipro/Havell's/Phillips)

Supply & Erection of surface mounted Round LED 18/20 watt PDC PCA housing.The LED driver shall be of isolated type with constant current and constant voltage topology to ensure optimum driving of LEDs, Efficacy 100 lm/w complete in all respect as desired by Engineer-in-charge at site. (Make: Crompton/Wipro/Havell's/Phillips)

MAIN PANEL Design ,manufacture & testing of main panel 1.6 mm thick MS sheet steel fabricated cubicle type Panel dust and vermin proof powder coated complete with hinged and lockable doors with flexible Earth Connection. All the panels dead Back construction complete with inter connections by copper tapes/ wires and painting & extra space for MCCB/MCB's . One set of phase indicating lamps with back up fuses in incoming feeder only. Each MCCB outgoing feeder shall be provided with one no. ON indication lamp. Panel shall be provided with earth Strip. INCOMMER:- Provision for 1 Nos. 630 Amp 415 Volt Breaking Capacity ≥ 36 KA Four Pole Microprocessor based Adjustable thermal & magnetic setting protection MCCB Unit. Bus Bar 700 Amp TPN Aluminium Busbar. (Description as per DNIT item No. 42)

TRANSFORMER:- S/E and commissioning of 11/.433 Kv Compact substation (CSS) 500 KVA complete with fixed manual switch fuse unit in SF6 insulated stainless Steel Enclosure, 1 no incomer VCB & outgoingACB, along with protection relays,CT, PT's, transformer 500 kVA oil type ONAN, BusBar, IDMT, protections, with all assecories complete along with (Foundation) CIVIL / MECHANICAL Structure required to install the CSS, complete in all respect as desired by Engineer-in-charge at site. (Make:Siemens/ Scheneider/Kirloskar/ ABB/L&T/Crompton)

GENERATOR Supply and Erection of 3 Phase 125 KVA Silent Genset with auto starter kit to be operated with Auto Changeover , noice level should be less than 75 db within the 1Mtr. Range,Fuel tank suitable for 8 Hrs of operation, 1 no. Battery for starting purpose, base rail, Remote start panel with battery charger,Installation arrangements for 200Amp changeover Switch, loading unloading, Panel complete set with 2 Year warranty in all respect as desired by Engineer -In -Charge at site. Compliance with Indian Standards. Make: SUDHIR/JACKSON) (Description as per DNIT item No. 44)

FOUNDATION:- Making of Reinforced cement concrete (1:2:4) foundation as per genset Dimensions( +1' around) and Approx 2' pathway around genset foundation complete in all respect as desired by Engineer -In -Charge at site.

Dismantling ,Shifting of existing HT/LT line /Poles conductor etc. Street light Pole ,change Single Arm brackets with new Double Arm brackets complete in all respect as desired by Engineer-in-charge.

S/E of Water Cooler stainless steel body with cooling capacity 60 LPH, storage capacity 120 LPH, Rated Current 2.5 Amp, Chiller tank & front panel top/bottom of stainless steel, top lid/side panel/real panel should be of GPSP precoated sheet with gaurd film, ISI marked, Anti corrosive of 60/120 Ltr complete in all respect as desired by Engineer-in-charge. (Make: USHA/Bluestar/Voltas)

S/E of six stage Compact RO System suitable for 100 People, treated water dispensing 50 LPH, TDS<2000 PPM, Hardness<600 PPM, Auto flush @ every start, every stop of Eureka forbes-Aquagaurd Reviva-50LPH/ equivalent Kent make. The product should have ISO 9001 and Indian Medical Association Certifica-tion. complete as desired by Engineer-in-Charge. (Make: Eureka Forbes-Aquagaurd/Kent)

Supply Erection of powder coated/anodized concealed Light Deep with PVC cover plate for fire detection system complete in all respect as desired by Engineer -In -Charge at site.

B. NETWORKING:- S/E and laying of CAT-6 Cable complete in all respect as approved by the Engineer-in-charge at site. ( Make: AMP, Schenider, MOLEX or Equivalent)

Supply Installation of 24 Port Patch Panels fully loaded complete in all respect as approved by the Engineer-in-charge at site. (Make: Molex/Extreme/schenider or Equivalent)

Supply Installation of Indoor Rack Mount Console Unit - 12U, 1 no. PDU 5Amp socket 5 no.,cable manager, fan complete in all respect as approved by the Engineer-in-charge at site. (Make: NETRACK/WALRACK or Equivalent)

Supply Installation of Indoor Rack Mount Console Unit - 15U, 1 no. PDU 5Amp socket 5 no.,cable manager, fan complete in all respect as approved by the Engineer-in-charge at site. (Make: NETRACK/WALRACK or Equivalent)

C. AIR CONDITIONING S/E of 3.0 TR Cassette Split Air conditioner (Copper) with twin rotary/scroll compressor to be installed in grid type false ceiling complete in all respect as desired by Engineer -In -Charge at site..Make :- O General , Daikin , Hitachi ,Mitsubishi

S/E of 4.0 TR Cassette Split Air conditioner (Copper) with twin rotary/scroll compressor to be installed in grid type false ceiling complete in all respect as desired by Engineer -In -Charge at site.Make :- O General , Daikin , Hitachi , Misubishi

S/E of 2.0 TR 4/5 Star Inverter Split Air conditioner (Copper) with rotary compressor to be installed on walls with stand for outdoor unit complete in all respect as desired by Engineer -In -Charge at Site .Make :- O General , Daikin , Hitachi ,Mitsubishi

S/E of 1.5 TR Inverter Five Star Inverter Split Air conditioner (Copper) with rotary compressor to be installed on walls with stand for outdoor unit complete in all respect as desired by Engineer -In -Charge at site..Make :- O General , Daikin , Hitachi ,Mitsubishi

S/E of copper refrigerant piping(19.6mm*9.53mm) complete with proper 9 mm insulation, fittings, elbow,bends, with supporting arrangement for walls , civil work etc for 3TR and 4TR Cassette split air conditioner complete in all respect as desired by Engineer -In -Charge at Site. Make:- Totalline,Ryoku,VRV

S/E of copper refrigerant piping(15.88mm*6.35) complete with proper 9 mm insulation ,fittings, elbow,bends, with supporting arrangement for walls , civil work etc for 2TR /1.5 TR split air conditioner complete in all respect as desired by Engineer -In -Charge at Site. Make:- Totalline,Ryoku,VRV

S/E hard PVC Pipe of 25 mm dia to withstand pressure of 10kg/cm² for drain of Airconditioners complete in all respect as desired by Engineer -In -Charge at Site (Make -Supreme/JINDAL/ FINOLEX/ DIPLAST)

S/E of MS fabricated duly painted MS ODU stand for split AC 4.0 Tr complete in all respect as desired by Engineer-In-Charge at site.