SITC of New Electrical Sub Station Work in Devi C Block Girls Hostel at Civil Hospital Campus, Asarwa, Ahmedabad.

Memorandum showing items of works to be carried out

NO Quantity Item of Work Unit Estimated Rates In Words AMOUNT

:Excavation for foundation upto 1.5 mt.depth All kind of Soil.Including Hard

Murram and Soft Rock etc including strutting, sorting & Dewatering out and

stacking of unuseful materials and disposing off the excavated stuff upto any lead

and lift.(Excavated earth / Stuff to be stacked and surplus earth/unuseble Rupees One Hundred Forty Nine

material to be disposed with the permission of local authority any lavies/charges and Paisa Sixty Seven Only

to be paid by agencies and no extra payments will be made and disposed at non

objectinable place to be found by the Contractor. )

Excavation for foundation for 1.5 mt. to 3.0 mt. All kind of Soil. Including Hard

Murram, Soft Rock & Hard Rock (Not Required Blasting) etc. including

strutting, sorting & Dewatering out and stacking of useful materials and

disposing off the excavated stuff upto any lead and lift (Excavated earth / Stuff

Rupees One Hundred Sixty Two

2 234.92 to be stacked and surplus earth/unuseble material to be disposed with the Cmt 162.38

and Paisa Thirty Eight Only

permission of local authority any lavies/charges to be paid by agencies and no

extra payments will be made and disposed at non objectinable place to be found

by the Contractor.)

General Note : This shall be applicable to all concrete plan as well as work.

1. Providing and laying in position Ready Mixed specified grade concrete for

PCC & reinforced cement conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to

site of work in transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying,

All Concrete Work content as per grade (without fly ash as per item description)

Rupees Three Thousand Six

3 14.57 and as per latest IS 456 for all PCC & RCC elements of all shape, all size, at all Cmt 3,697.91 Hundred Ninety Seven and Paisa

places and heights/ depths including transporting, laying of concrete to site by

Ninety One Only

any means like pumping or tower crane etc., finishing and curing etc. and

including Admixtures in recommended proportions as per IS 9103 to accelerate,

retard setting of concrete as per direction of Engineer-in-charge. Rate shall be

inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and

labour for insert sleeves if any wherever required while casting. Rate also to

include lift charges and scaffolding for any heights / depths from FFL/GL.(unless

otherwise specified)

Including for provide all formwork should be rigid & water tight using best

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering & Providing formwork of

steel cup lock system including centring shuttering strutting and propping etc.

propping and centering below supporting floor to ceiling and removal of the same Rupees Five Thousand Forty Two

for in situ reinforced concrete and plain concrete work in flat surfaces such as and Paisa Nine Only

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

engineer in charge and approved , rates includes all levels , heights Up to

mtr, excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be

as per IS 456) for reinforced concrete work in:

Filling available selected / approved stacked excavated earth (excluding rock)

(Earth which is stacked at any location outside the campus non- objectionable

place shall be found by the contractor) in trenches, plinth, sides of foundations Rupees One Hundred Thirty and

etc. in layers not exceeding 20 cm. in depth consolidating 95% of MDD each Paisa Thirty Nine Only

deposited layer by ramming and watering and Compaction with Mechanical

equipments if possible

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering & Providing formwork of

steel cup lock system including centring shuttering strutting and propping etc.

Rupees Six Thousand Four

6 9.10 propping and centering below supporting floor to ceiling and removal of the same Cmt 6,401.97 Hundred One and Paisa Ninety

for in situ reinforced concrete and plain concrete work in flat surfaces such as

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

engineer in charge and approved , rates includes all levels , heights Up to 6.0 mt,

excluding reinforcement.

(No extra will be paid in variation of cement level, minimum cement level will be

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick

water proof ply with Exposed work in centring, shuttering & Providing formwork

Rupees Six Thousand Five

7 13.14 of steel cup lock system including centring shuttering strutting and propping etc. Cmt 6,505.60 Hundred Five and Paisa Sixty

propping and centering below supporting floor to ceiling and removal of the same

for in situ reinforced concrete and plain concrete work in flat surfaces such as

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

engineer in charge and approved , rates includes all levels , heights Up to

mtr, excluding reinforcement.

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick

water proof ply with Exposed work in centring, shuttering & Providing formwork

Rupees Six Thousand Five

8 7.47 of steel cup lock system including centring shuttering strutting and propping etc. Cmt 6,545.85 Hundred Forty Five and Paisa

propping and centering below supporting floor to ceiling and removal of the same

Eighty Five Only

for in situ reinforced concrete and plain concrete work in flat surfaces such as

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

engineer in charge and approved , rates includes all levels , heights Up to

mtr, excluding reinforcement.

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick Rupees Six Thousand Two

9 1.07 water proof ply with Exposed work in centring, shuttering & Providing formwork Cmt 6,228.61 Hundred Twenty Eight and Paisa

of steel cup lock system including centring shuttering strutting and propping etc. Sixty One Only

propping and centering below supporting floor to ceiling and removal of the same

for in situ reinforced concrete and plain concrete work in flat surfaces such as

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

Providing charge and in

laying approved

position, rates

grade all levels , for

concrete heights Up to

reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick

water proof ply with Exposed work in centring, shuttering & Providing formwork

Rupees Six Thousand Two

10 1.07 of steel cup lock system including centring shuttering strutting and propping etc. Cmt 6,268.86 Hundred Sixty Eight and Paisa

propping and centering below supporting floor to ceiling and removal of the same

Eighty Six Only

for in situ reinforced concrete and plain concrete work in flat surfaces such as

soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per IS:9103

to accelerated, retard, setting of concrete, improve workability as per direction of

engineer in charge and approved , rates includes all levels , heights Up to

mtr, excluding reinforcement.

Providing, laying controlled cement concrete M 250 and curing complete

Rupees Seven Thousand One

including the cost of form work (rates for centering, shuttering, formwork staging

11 30.12 Cmt 7,130.08 Hundred Thirty and Paisa Eight

scaffolding for considering up to 6.00 m height) but excluding reinforcement for

reinforced concrete work in: (C) RCC Slab i) up to Ground Floor slab level

Providing, laying controlled cement concrete M 250 and curing complete

including the cost of form work (rates for centering, Rupees Seven Thousand One

12 19.61 shuttering, formwork staging scaffolding for considering up to 6.00 m height) but Cmt 7,190.14 Hundred Ninety and Paisa

excluding reinforcement for reinforced concrete Fourteen Only

work in: (C) RCC Slab i) First Floor slab level

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick

water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. Rupees Seven Thousand Forty

propping and centering below supporting floor to ceiling and removal of the Five and Paisa Eighty Three Only

same for in situ reinforced concrete and plain concrete work in flat surfaces such

as soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per

IS:9103 to accelerated, retard, setting of concrete, improve workability as per

direction of engineer in charge and approved , rates includes all levels , heights

Up to 6.00 mtr, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum

Providing and laying in position M-250 grade concrete for reinforced cement

concrete work, using cement concrete work using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for any lead having continuous

agitated mixer, manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of batching plant from transit mixer to

site of laying, cost of water tight Centering , shuttering by using 18 mm thick

water proof ply with Exposed work in centring, shuttering & Providing formwork

of steel cup lock system including centring shuttering strutting and propping etc. Rupees Seven Thousand Eighty

propping and centering below supporting floor to ceiling and removal of the Six and Paisa Eight Only

same for in situ reinforced concrete and plain concrete work in flat surfaces such

as soffits of suspended floors slabs Landings walls, Fins and beams, column and

the like, floors etc & sides and soffits of beams, Haunching cantilevers Girders,

using grouting if required, admixture in recommended proposition as per

IS:9103 to accelerated, retard, setting of concrete, improve workability as per

direction of engineer in charge and approved , rates includes all levels , heights

Up to 6.00 mtr, excluding

reinforcement. (No extra will be paid in variation of cement level, minimum

Providing and laying TMT Bar FE 500/500D reinforcement for R.C.C. work and

straightening, cutting, bending, binding & placing in position completed upto any

Rupees Seventy Two and Paisa

15 18221.00 floor any level as per I.S. Standard. complete.as directed by EIC. Kg 72.72

Seventy Two Only

Providing and laying autoclave aerated concrete blocks as per drawing in single

or multiple layers with Ready mix joining mortar. Crushing strength of aerated

concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry

condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed

0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the

surface with necessary tool tackles The drying shrinkage shall be not more than

0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks when tested Rupees Four Thousand Five

16 28.84 in accordance with IS : 6641 (Part-2)-1972 etc. at all floors, any heights, all Cmt 4,514.84 Hundred Fourteen and Paisa

depths, any levels (in foundation and superstructure) and all places including Eighty Four Only

curing, scaffolding, racking / flush jointing etc complete, as per drawing /

specification and approved by architect and as directed by Engineer Incharge for

all civil, plumbing, electrical & infrastructure work

a) Ground FLoor

Providing and laying autoclave aerated concrete blocks as per drawing in single

or multiple layers with Ready mix joining mortar . Crushing strength of aerated

concrete block shall not be less than 40 KG/sqcm, minimum density in oven dry

condition between 651 to 750 KG/CUM, thermal conductivity shall not exceed

0.30 w/mk, fire resistant 4 hours, in true line level and plumb and cleaning the

surface with necessary tool tackles The drying shrinkage shall be not more than

0.05 percent for Grade 1 blocks and 0.10 percent for Grade 2 blocks when tested Rupees Four Thousand Five

17 28.36 in accordance with IS : 6641 (Part-2)-1972 etc. at all floors, any heights, all Cmt 4,568.17 Hundred Sixty Eight and Paisa

depths, any levels (in foundation and superstructure) and all places including Seventeen Only

curing, scaffolding, racking / flush jointing etc complete, as per drawing /

specification and approved by architect and as directed by Engineer Incharge for

all civil, plumbing, electrical & infrastructure work

Providing & laying 15 mm Ready Mix cement mortor 1:4 (1 cement : 4 coarse

sand) cement plaster in single coat on brick/concrete wall for interior plastering

Rupees One Hundred Seventy

18 210.23 finished even and smooth including finishing etc complete. Including Water Smt 171.84

One and Paisa Eighty Four Only

cement Compound.

a) Ground floor

Providing & laying 15 mm Ready Mix cement mortor 1:4 (1 cement : 4 coarse

sand) cement plaster in single coat on brick/concrete wall for interior plastering

Rupees One Hundred Ninety Six

19 210.23 finished even and smooth including finishing etc complete. Including Water Smt 196.66

and Paisa Sixty Six Only

cement Compound.

Providing & laying 12mm thick cement plaster in single coat on ceilings and

sofits of stairs for interior plastering upto floor two level finished even and

Rupees One Hundred Twenty Two

20 87.20 smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc complete. Smt 122.84

and Paisa Eighty Four Only

a) Ground Floor

Providing & laying 12mm thick cement plaster in single coat on ceilings and

sofits of stairs for interior plastering upto floor two level finished even and

Rupees One Hundred Forty Seven

21 87.20 smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing etc complete. Smt 147.65

and Paisa Sixty Five Only

Providing & laying 20 mm thick double coat sand face/mala cement plaster for

all floor all height with use of Ready Mix mortar on interior/exterior Block, brick/

concrete work for plastering comprising of base coat of 12 mm thick cement

Rupees Three Hundred Sixteen

22 388.85 plaster in cement mortar (1 cement: 4 coarse sand) in rough finishing and 8 mm Smt 316.13

and Paisa Thirteen Only

thick top coat of cement mortar 1:2 ( 1 cement : 2 coarse sand) finished with

trovel including scaffolding curing etc. complete. Including Water cement

Applying two coats of acrylic lapy ( putty) & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade including Rupees Forty and Paisa Fifty Nine

thoroughly brushing the surface free from mortar dropping and other foreign Only

matter and sand papered smooth.

Providing and applying Wall painting (three coats) with plastic emulsion paint of

approved brand and manufacture on under coated wall surface to give and even

Rupees One Hundred Twelve and

24 594.86 shade including throughly brushing the surface free from mortor droppings and Smt 112.95

Paisa Ninety Five Only

other foreign matter and sand paperd smooth on new work to give an even

shade.for all height

Finishing wall with weather proof low velocity ultima exterior emulsion paint on

wall surface (two coats) Including 2 coat primer and 2 Cost Putty (If required)

Rupees One Hundred Fifty Five

25 388.85 on wall surface to give an required shape even shade after thoroughly brushing Smt 155.11

and Paisa Eleven Only

the surface to remove all dirt, and remains of loose powdered materials. Etc

complete for all height

Providing and laying average 25 mm thick mirror polished kotah stone of

approved quality, selected and sorted for uniform colour in floor, otta, platform,

etc. of required sizes upto 600 x 600 mm fix size ( No Variation) as per design in

normal pattern (straight or staggered joint with square or rectangular shaped

stone) and residue as per drawing including 1:6 (1 cement : 6 sand) cement

mortar bedding of average 20 mm thickness jointed with grey cement and colour

pigment in proportion to match the shade of kota stone. Rubbing and polishing to Rupees Nine Hundred Ninety Two

be done with 2 coats of 60, 120 grades of emery, balckchapadi and gutka for and Paisa Sixty Six Only

special polish after it polishing to be done with 220, 320, 400, 600 grades of

emery till mirror finish is achieved. Curing, daily moping with water & kerosene

as directed for at least 15 days after final polishing etc. complete upto the

satisfaction of the Architect or Engineer-in-charge. (NO WAXING WILL BE

Providing and laying 18mm thick granite of specified size colour, shade and of

approved make, in skirting, risers of steps, dado, cladding , sill and jambs of

door, window & ventilation frame with mini. two coat of construction chemical

Rupees Two Thousand Four

and as per manufacture specification incl. rubbing and polishing, making edge

27 6.96 Smt 2,424.00 Hundred Twenty Four and Zero

moulding, making grooves (any nos.)rounding edge and All joints filled with

coloured cement putty as per architect detail and wiped to give sharp joints with

flush pointing and washed clean with acid as direction by E.I.C.

Providing and laying polished kota stone slab 25 mm thick in skirting, risers of

Rupees One Thousand One

steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement :

28 10.18 Smt 1,187.79 Hundred Eighty Seven and Paisa

coarse sand) and jointed with gray cement slurry including rubbing & polishing

Seventy Nine Only

Providing & laying china mosaic flooring of approvd make for plain and curved

surfaces at floor, dado, otta etc. comprising of 20 to 25 mm size broken pieces of

ceramic/ glazed tiles (only white colour) laid over 1:6 cement mortar bedding

including applying cement slurry at the rate of 2.75 kg per Sq.m. on plain or

sloped surfaces and filling joints with white cement. The flooring/ dado shall be

tampered with wooden rammer not exceeding 2 Kg in weight to bring the mortar

up to the surface including rounding of the junctions and extending them upto

cm along the parapet wall. The rate shall include any type of bands, vata, any

colour, any pattern or design as per drawing, curing, cleaning with water and Rupees Seven Hundred Forty

oxalic acid etc. complete as sample approved by Architect/ EIC. (Only plan area Seven and Paisa Twenty Nine Only

shall be measured including vata upto 150mm height). Rates should be inclusive

of acid washing and vata.

'All the waterproofing activities shall be carried out by in-house application

company of the principal material manufacturer and provide a written corporate

Supply Apply Corporate Warranty from the principal manufacturer that all work

executed will be free from defects in materials, workmanship and free of leaks

for a period of 10 years from the date of Work Completion, unless resulting from

structural defects or causes other than the work of this section. Said defects shall

Providing and laying IPS cement concrete flooring of mix 1:2:4 (1 cement:

coarse sand: 4 graded stone aggregate of 20mm nominal size) in a single layer,

including mixing, laying, compacting, and finishing the surface with a floating

coat of neat cement, with a slope as required for proper drainage. The work Rupees Three Hundred Fifty One

includes adding a waterproofing compound as per the manufacturer’s and Paisa Fifty Six Only

specifications to enhance the water resistance of the flooring. The thickness of

the IPS flooring shall be between 50mm to 75mm.

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 Rupees Twenty Three and Paisa

31 42.60 including neat cement finishing, watering etc. complete.For all floor Rmt 23.68

Sixty Eight Only

Terrace Waterproofing

Surface Preparation for waterproofing: Cleaning and preparation of surface with

the help of wire brush or grinder. Cleaning by air blower, crack filling etc,

complete. Wrapping all pipes inserts with a two way adhesion tape of make Dr.

Fixit Bathseal tape and grouting the gaps space between the slab & parapet wall,

grout the pipe gaps with non-shrink grout Dr. Fixit Pidigrout 10M or by

preparing polymer modified mortar with Dr. Fixit Pidicrete URP in the ratio of

1:3 by adding polymer 10% by weight of the cement.

Rupees One Thousand Four

32 78.02 Angel Fillet: Providing 50 mm X 50 mm angle fillets on the vertical up-stands, Smt 1,479.65 Hundred Seventy Nine and Paisa

parapet wall junction corners, service units and properly dressed by preparing

Sixty Five Only

polymer modified mortar with Dr. Fixit Pidicrete URP in the ratio of 1:3 by

adding polymer 10% by weight of the cement.

Waterproofing: Supplying & applying 2 coats of pre packed 2 component

cementitious waterproof coating, Dr. Fixit Fastflex, with a mix ratio of (liquid:

Powder), parts by wt. - 1:1.4, in the slab areas & extending it to the wall up to

300mm height above FFL. This includes lying of a 150mm wide strip of an open

woven glass fiber mesh over the angle fillets on the 1st coat while it is still wet.

The coverage shall be min. 2 Kg/sq.mt in 2 coats, self-curing for 4 days,

Providing and fixing ISI marked 35mm thk. Flush door shutter conforming to IS:

2202 (Part - 1 1980). 35mm thk. Flush door of approved quality factory made

solid core flush door shutter in single and double leaf fixing on Granite stone

frame (Granite stone Frame shall be paid seperately)as per drawing. 1mm thk.

Laminate sheet of approved colour / shade on the both side of 35mm flush door.

The timber shall be free from decay and insect attack knots and knot holes. The

flush door shutter to be ready factory made with both side hardwood ply board

faced, pine - wood core in continous gapless section with butt joints tightly

Rupees One Thousand Nine

33 2.10 factory bonded with hot press process on both face of the core with plywood. Smt 1,989.70 Hundred Eighty Nine and Paisa

including ISI marked hardware door fitting of handle & lock complete in all

respects including anti-termite treatment.Handles:- SS Handle, Lock :- cylindrical

lock , Hinges :- 4 Nos SS Hinges –Heavy gauge each shutter, Tower Bolts:-

Nos stainless steel each shutter and Stopper, Also Vision Panel for 6 mm Clear

Glass with Polish bidding patti to fix it, all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge and consultant.

Providing and fixing Colour Anodized aluminium work for doors, windows,

ventilators and partitions (Sliding window

like Two TRA ck, Three TRA ck, Four TRA ck, fix window/ Openable window /

Fix-Partition, etc),with extruded built up

standard tubular sections/ appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS :

1285, fixed with RA wl plugs and screws or with fixing clips, or with expansion

hold fasteners including necessary

filling up of gaps at junctions, at top, bottom and sides with required Rupees Three Hundred Ninety

PVC/neoprene felt etc. Aluminium sections shall One and Paisa Eighty Eight Only

be smooth, rust free, stRA ight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. bRA ss / stainless steel screws, fixture

like aldrop, handle, hinges / pivots &

window Bearings & concealed lock etc all complete at all floors/all levels/all

heights as per architectuRA l dRA wings

and the directions of Engineer-in-charge. .(Glazing and paneling to be paid under

relevant Item) Nut & bolt.

Providing and fixing Compact Sheet of any size, any shape, any color, any

texture as per approved sample (approved by architect)

and specified thickness in aluminium fRA me and shutter work with necessary

cutting of sheet, single side, double side coloured

as per dRA wing & specifications including providing and fixing EPDM quality Rupees One Thousand Two

35 15.20 rubber/ silicon sealant/ adhesive tape/ screwing on Smt 1,247.35 Hundred Forty Seven and Paisa

the periphery of the sheet as per the required thickness etc. complete at all floors/ Thirty Five Only

all levels/ all heights as per the dRA wing &

directed by EIC / Architect. Cut edges of the compact sheet shall be provided

with masking tape. Actual installed quantity shall be

measured and paid. RA te shall be inclusive of all type of wastage.

Providing & fixing rolling shutters of approved make made of 80 mm. Wide M.S.

laths inter locked together theit entire length and jointed together at the end locks Rupees Three Thousand Five

36 26.25 mounted on specially designed pipe shaft with bracket plates, guide channels and Smt 3,503.41 Hundred Three and Paisa Forty

out side locking with mechanical gear operated device including the cost of One Only

Hood cover and spring including priming coat of red lead paint two coat of Oil

paint .etc complete.

Providing, fabricating, assembling, hoisting/ erecting and fixing in position at

any heights/ any levels/ all floors/ all shapes & sizes with all leads & lifts using

MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS Plates,

Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bright Bars, Angles, MS

Sheet, Girder, Beam. threaded J bolts, insert plate, support plate etc as per

drawing. all confirming to latest relevant IS codes for the work of steel structures

like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets,

monkey ladder, cattle trap, grill door, pipe rack, rungs, false ceiling frame work,

Rupees One Hundred Twenty

37 1750.00 framing for facade, Roof canopy, fencing posts, M.S. Screen & fencing jali Kg 127.95

frame work etc. including straightening, cutting, bending, bolting and welding the Seven and Paisa Ninety Five Only

members all as per structural drawings and as per detailed specifications (for

materials & workmanship) including necessary scaffolding/ staging etc. complete

in the situations described hereinafter and comprising of : i) Profile Cutting of

components to required length/ width and shape/profile; ii) Smooth grinding/

machining of edges/ faces/ all welding joints; iii) Necessary welding (electric arc

welding) for required weld lengths and sizes. Fabrication shall be in a perfect

architectural workmanship manner and as provided in section V & VI of IS

& IS 7215. Welding shall be carried out by qualified welders/ fabricators. The

Electrical Work

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

Rupees Eight Thousand Eight

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

38 2 Ea. 8861.74 Hundred Sixty One and Paisa

Hz. with all internal connections, spreader tinned copper & complete erected in

Seventy Four Only

existing 16 G.M.S. housing.-Cat-lll

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic release suitable to work Rupees Twenty Three Thousand

on A.C.supply 50 Hz. with all internal connections, spreader tinned copper & Forty One and Paisa Thirteen Only

complete erected in existing 16 G.M.S. housing. Cat-lll

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA and above at 415 V having Normal

Rupees Twenty Seven Thousand

current rating 400A. with variable Thermal & magnetic release suitable to work

40 9 Ea. 27751.77 Seven Hundred Fifty One and

on A.C.supply 50 Hz. With all internal connections, spreader tinned copper &

Paisa Seventy Seven Only

complete erected in existing 16 G.M.S. housing. -cat-lll

Approved make standard Draw out type 4 Pole Air circuit breaker. Having 50 kA

breaking capacity with ICU=ICS=ICW (1 sec)Vsr=690 v, Ui=1kv ,impulse

voltage=12 kv with following type of relay and accessories.(B) with Rupees One Lakh Sixty One

41 3 microprocessor Release with over load, short circuit, earth fault protection and Ea. 161515.16 Thousand Five Hundred Fifteen

metering display in modular design with LED display and Test Trip button and Paisa Sixteen Only

facility, CTs and auxiliary contacts, of following current ratings. (iii) 1250Amp

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

Rupees Ten Thousand Five

wrapped with colour insulating tape for phase sequence of following current

42 8 Rn.Mtr 10559.55 Hundred Fifty Nine and Paisa Fifty

carrying capacity, erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary connections.

(E) Suitable for 630 Amp. capacity

(G) Suitable for 1200 Amp. Capacity Rupees Sixteen Thousand Four

43 10 Rn.Mtr 16499.36 Hundred Ninety Nine and Paisa

Thirty Six Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Eight Hundred Eleven and

44 10 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 811.03

Paisa Three Only

having following capacity (c)63 Amp. Cat-lll

Providing and erecting metallic vitrified danger notice board as per language

Rupees Eighty One and Paisa

45 4 suggested by engineer incharge for HIGH VOLTAGE installation to be erected Ea. 81.81

Eighty One Only

as per IS.-2551.

Providing and erecting required size HOT deep Galvanised iron strip for earthing

Rupees Seventy Seven and Paisa

46 200 of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper Kg. 77.77

Seventy Seven Only

Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. Rupees Seven Hundred Ninety

Four and Paisa Eighty Seven Only

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

Rupees Five Thousand Seven

resistance of installation duly stamped and signed by agency and officer Incharge

48 30 Ea. Hundred Sixty and Paisa Three

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (b)For Electrical installation up to

11 kV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper

wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange

- bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at Rupees Forty Thousand Nine

10 CPRI approved factory (iv) with 1000 mm. depth Sq.Mtr 40999.94 Hundred Ninety Nine and Paisa

Ninety Four Only

Design, Supplying, installing, testing of factory fabricated ready made Three

phase APFC Panel Cubical Panel fabrication should be type tested as per IEC

61921, 61439:1&2 Capacitor Duty Contactor for switching as per following

Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC,

SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA

at 400/440 Volts, with OC, SC, internal earth fault protection,Copper tinned

insulated Busbar,Cubical panel should be indoor type with IP 43 and IK

10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Rupees Seven Lakh Eighteen

50 1 Each 718985.67 Thousand Nine Hundred Eighty

Reactor for each capacitor,Panel having Short Circuit and Overload

Five and Paisa Sixty Seven Only

protection,Each step Capacitor having suitable MCB with Sc, OL, internal earth

fault relay,Each stage having Stage Contactor (Capacitor load rating),PF

regulator master controller having suitable steps with LCD display, Rs

Communication port, Indication LED Lamps for main incomer and ON-OFF for

each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site

situation,Cooling fans for panel (g)250KVAR

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary Rupees One Thousand Eighty Five

clamps or in existing trench / pipe of following size of cables (H) 3 1/2 core and Paisa Seventy Five Only

185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

Rupees One Thousand Four

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary

52 700 Mtr. 1401.88 Hundred One and Paisa Eighty

clamps or in existing trench / pipe of following size of cables (I) 3 1/2 core

Sq. mm( 120 Sq. mm 1/2 core)

Providing and erecting ISI Marked 3core 185 Sq.mm XLPE insulated 11 KV Rupees One Thousand Nine

53 60 armoured cable Aluminium conductor IS-7098 to be laid on wall with clamps or Mtr 1961.42 Hundred Sixty One and Paisa Forty

in provided cable trench / pipe approved manner as directed. Two Only

Providing and erecting sandwitched type bus duct having following specification

: Sandwich type busbar for use as Feeder Busbar for interconnection between

separate electrical equipment/ load centers, and for use as Plug in busbar risers.

54 The busbar shall be suitable for operation in a 690V / 1000 V system with

frequency of 50 Hz .System can be either earthed or unearthed. Impulse voltage

should be 12 KV. Standards:

The busbar shall be designed and manufactured in accordance with the following

international standards for busbar trunking.

-IS 8623/ 1993 Part I & II : Particular requirements of busbar trunking System

-IEC 61439 Part I & VI : Particular requirements of busbar trunking System

-IEC- 60529 : Degree of protection TESTING

The busbars shall be type tested at a reputable national / International test

laboratory (ASTA or CPRI) for short circuit withstand. The test shall be for a

minimum duration of one second.

• Degree of ingress protection (IP rating) shall also be tested at any reputed

independent laboratory. This test shall be for IP 55 for Indoor and IP 65 for

Outdoor application.

• Short circuit and Degree of protection type test reports will be submitted for

vThe bsubars shall be of high conductivity Copper of 99.9% pure ETP grade and

high conductivity Aluminium of 99.59% pure 63401 grade.

Where as earth conductor is required, it shall be separate external earth

conductor, of high conductivity aluminium. Cross section of Earth Conductor

shall be as per IEC

It should be possible to provide a 200% Neutral where specified.

Phase cross over box should have busbars crossing over each other not cables.

The busbars shall be individually insulated with 2 layers of insulating film.

Layers of POLYSTER material class ‘F’, 155ºC.

The housing shall be made of 1.6 mm electrogalvanised sheet steel, with an

epoxy powder coated paint finish of RAL 7032 grade. Alternatively Aluminum

casing of 2.5mm may also be provided. The housings shall be profiled, to provide

higher strength and efficient heat dissipation. The width of the housings shall be

same for all ratings of busbars, in order to provide interchangeability of tap off

The joints between sections shall be made so as to provide flexibility during

installation and expansion / contraction of busbar during operation. The joints

shall be of the single bolt type. The joint construction must have the following

a) Thermal expansion of Busbars at joint of at least 4 mm per joint.

b) The joint insulation must be of one piece moulded design and not have any cut

edges which can absorb moisture.

c) Joint assembly shall be removable as separate sub-assembly so that it can be

inserted or removed without disturbing the adjacent sections.

d) The joint system must be designed in a way that the installer cannot insert the

busduct length too far and damage the bolt insulator.

e) The busbars ends shall not have any holes or slots at the joints – the electrical

continuity shall be through pressure plates, achieving a high area of joint cross

section and expansion capability.

a) Plug in boxes will be draw out type, contacts shall be silver plated and spring

b) The front operating handle will be interlocked with the plug-in boxes cover so

that MCCB can be operated only with suitable cover in close position.

c) The door shall be provided with the door knobs.

d) When the MCCB is in ‘ON’’ position, even with the door knobs unlocked, the

operator should not be able to remove the box or open the tap off location cover.

e) During insertion, the earth conductor shall make contact first before the phase

conductors. This should follow the sequence of first in last out concept.

f) When the box is open the live conductors shall be safe guarded by a

transparent insulator plate which allows for visible inspection but does not allow

touching of the live conductors.

g) The tap off unit arrangement must achieve IP 54 without requiring any

additional sealing at site.

h) The tap off boxes will be suitable for accommodating MCCBs or other

accessories, as required. The tap off units should allow the flexibility of

accommodating different, reputed MCCB makes, to be mutually agreed

depending on the tender requirements.

(A) Aluminium Bus (Maximum Current Density 130A/ sq.cm)

(f)1600 Amp. capacity Rupees Sixteen Thousand Eight

60 Mtr. 16820.54 Hundred Twenty and Paisa Fifty

Providing, erecting, testing & commissioning approved make oil immersed

ONAN cooled, double wound, core type indoor / outdoor copper wound 11kV/

433V step down transformer of following capacities operating on 3 phase, 50 Hz

4 wire & neutral earthed system continuously rated for a full temperature rise in

55 oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete

with necessary radiator first filling of new transformer oil & standard fitting as

below complying with IS 1180( Part 1 ):2014 standards with energy efficiency

Off load tap changing range steps +2.5% to -5% on H.V for variation should be

provided. The H.V. shall be connected Delta & Secondary with star connection.

The transformer should have cable-end boxes on H.T. side suitable for up to

core 150 sq.mm. XLPE cable & on L.T. side suitable for bus duct or cables as per

requirement complete with test certificates from manufacturers

1. Oil conservator with filling Hole & Cap - One No.

2. Thermometer pocket with 6" dial type thermometer switch alarm &

trip contacts- Two nos.

3. Silica-gel breather with charge- One No.

4. Plain oil level gauge - One No.

5. Drain / Sampling / Filter valve- One No.

6. Top Filter Valve - One No.

7. Explosion vent with Diaphragm - One No.

8. Rating & Diagram plate - One No.

9. Additional neutral bushing for earthing - One No.

10. Bi directional Roller - Four Nos.

11. Earthing terminals - Two Nos.

12. Lifting lugs - Two Nos.

13. Air release plug. - One No.

14. Double float buchholz relay with Alarm and trip contacts.

15. Control cable as required from Transformer to VCB Panel is to be provided

with necessary connection to VCB relays for protection.

as per IS 1180 Latest levels norms

Rupees Seventeen Lakh Fifty Five

Max. allowable loses as per IS 1180 Latest levels norms at the time of tender Cat-

2 1755935.5 Thousand Nine Hundred Thirty

Five and Paisa Fifty Only

Providing, erecting, testing commissioning & getting Plan Approval as well as

NOC from Electrical Inspector for extensible H.T panel comprising of one

630A/800A/1250A. H.T. VCB incoming & Two outgoing 630/800/1250 A

Drawout type VCB confirming as per I.S. for use on 11 kV, 3 phase, 50 Hz.

unearthed A.C. supply system having breaking rupturing capacity of 350 MVA

or Above complete with spring operated mechanism, mechanically & automatic

ON-OFF and spring mechanism charged, discharged indicators, ON-OFF

mechanical push button, operation counter necessary auxiliary switches, closing Rupees Thirteen Lakh Twenty

56 1 shunt trip, air insulated busbar chamber having heat shrinkable PVC sleeves, Ea. 1328836.8 Eight Thousand Eight Hundred

mechanical interlocks safety shutters, isolating plugs and a VCB trolley with Thirty Six and Paisa Eighty Only

three vacuum interrupters with epoxy support insulators and self aligning finger

type isolating contacts. The breaker shall be Manual cum motorised mechanism

& auto spring charge with TNC switch closing with following accessories. The

Standared Companies Switchgear shall be Used and Only Manufacutres as per

IEC 62271-200/201 for beneficial use.

1.flush mounting type digital multifunctional meter with communication facility -

2. Power Factor Meter One No

3. Double core current transformer cast resin type having ratio 200 to 50/1 core

for metering & second core for protection having required class of accuracy. -

4. Instantaneous under voltage relay,Over Voltage relay & Temperature rise

5. Electrical closing coil & short trip coil operating on 110V. D.C.- Three Sets

6. Auxiliary relay for anti pumping device

7. Three phase Three limb Drawout type feeder connected & output of 200 VA

cast resin insulated potential transformer having ratio 12000V./110V. and

VA Burdon with 0.5 accuracy. - One No.

8. Common Alarm bell operating on 110V A.C.- One No.

9. Digital KWH Meter - One No.

10. Cable boxes suitable up to 11 kV 3core 150 sq.mm XLPE cable. - Three

11. 230V. A.C. to 110V. D.C. power pack for closing & tripping circuit

12.Breaker ON-OFF, Auto trip and spring charged indicators. - Three Sets.

13.Phase indicating & panel illumination lamps with plug socket - Three Sets.

14.Numerical Communicable type non directional O/C & E/F Relay with

a setting of 5-250% both in O/C & E/F. -Three Set

complete with necessary interconnection with air insulated high grade copper

busbar {Breaker Testing scope include Closing Time, Opening Time, VCB Hi-

Pot test at Site}{ Relay Testing Scope Include testing of all protection by three

phase testing kit at site }(VCB Trolley is to be provided)

Providing and fixing printed instruction chart both in English and Gujarati and

duly framed with front glasses, for treatment of person suffering from Electric Rupees One Hundred Thirty and

shock with minimum 50" diagonally size. Paisa Twenty Nine Only

Supplying rubber matting of following thickness as per IS:15652/IEC

Rupees One Thousand Twenty

58 12 b)4mm Sq.Mtr 1027.17

Seven and Paisa Seventeen Only

Supplying stand first AID box with antiseptic cream, medicine for use on wounds

due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-

Rupees Two Hundred Ninety Nine

59 2 aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or Ea. 299.97

and Paisa Ninety Seven Only

similar) etc. (All above contents shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge

G.I. sheet with extra handle at bottom duly painted white inside and Red out side Rupees Two Hundred Fourteen

with FIRE mark, filled with dry-sand and kept on existing stand provided or and Paisa Twelve Only

hung on wall hook.

Providing pair of rubber hand gloves suitable for working on 11 kV/22 kV

Rupees Two Hundred Fourteen

61 3 supply. Ea. 214.12

and Paisa Twelve Only

Supplying and erecting high tension cable end box outdoor type suitable. for 11 Rupees Three Thousand Eight

62 4 kV 150/185Sq.mm 3core H.T. cable complete with gland bushing and jointing Ea. 3853.15 Hundred Fifty Three and Paisa

material. Fifteen Only

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and Rupees One Thousand Seven

63 5 brackets confirming to IS 2171 1985 and complete erected with necessary Ea. 1712.96 Hundred Twelve and Paisa Ninety

clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall Six Only

complete[A] For 5 Kg Capacity

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and Rupees Two Thousand Two

64 5 brackets confirming to IS 2171 1985 and complete erected with necessary Ea. 2226.04 Hundred Twenty Six and Paisa

clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall Four Only

complete. [B] For 10 KG Capacity

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following Rupees Six Thousand Five

65 5 capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts Ea. 6591.26 Hundred Ninety One and Paisa

grouted in wall complete. [A] For 4.5 Kg Capacity Twenty Six Only

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

Rupees Eight Thousand Six

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts

66 5 Ea. 8671.86 Hundred Seventy One and Paisa

grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Eighty Six Only

Supplying & fixing Steel Chequered Plate having 12 mm thickness, duly painted Rupees Five Thousand Seven

67 50 with two coats of black Japan colour. (Average Wt 200.3 kg / Sq.Mtr) Sq. Mtr. 5780.23 Hundred Eighty and Paisa Twenty

Supplying and erecting approved make panel mounting type Digital Voltmeter

Rupees One Thousand Two

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

68 4 Ea. 1275.63 Hundred Seventy Five and Paisa

board with all connection, wiring etc .with manufacturers calibration certificate.

Sixty Three Only

Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Rupees One Thousand Five

69 4 Amps suitable to operate on 500 Volt AC , erected on existing panel board with Ea. 1558.43 Hundred Fifty Eight and Paisa

all connection, wiring etc .with manufacturers calibration certificate. Forty Three Only

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC

Rupees Three Hundred Seventeen

70 8 Supply 500 V on existing panel board with necessary connections. Ea. 317.14

and Paisa Fourteen Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

Rupees Two Hundred Seventy

71 4 ratio 15 VA burden erected in existing CRCA box duly secured with insulating Ea. 274.72

Four and Paisa Seventy Two Only

materials connected to the meter

Supplying & erecting approved make Power Factor Meter 150mm dia

flush/projection type/ balanced & unbalanced load to work with appropriately Rupees Five Thousand One

72 4 provided CT’s 100/5A to 400/5A ratio & other accessories complete erected in Ea. 5102.52 Hundred Two and Paisa Fifty Two

M.S. box & connected to the circuit by means of PVC copper Core leads. Only

Supplying and erecting approved make suitable panel indicator LED type lamp, Rupees Forty Three and Paisa

lens cover, complete erected with necessary connections. Forty Three Only

Supplying & erecting directly operated single phasing preventer complete erected

Rupees One Thousand Seventy

74 4 and connected to supply up to 45 Amp. Range. Ea. 1078.68

Eight and Paisa Sixty Eight Only

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.

(a) One wire 1.00 sq. mm Rupees Fifteen and Paisa Fifteen

(b) One wire 1.50 sq. mm Rupees Twenty One and Paisa

Twenty One Only

(c) One wire 2.50 sq. mm Rupees Thirty Four and Paisa

Thirty Four Only

(e) One wire 6.00 sq. mm Rupees Seventy and Paisa

(g) One wire 16.00 sq. mm

Rupees One Hundred Seventy

Seven and Paisa Seventy Six Only

(h) One wire 25.00 sq. mm

Rupees Two Hundred Ninety Five

and Paisa Ninety Three Only

(j) One wire 50.00 sq. mm

Rupees Five Hundred Eighty Eight

and Paisa Eighty Three Only

(l) One wire 95.00 sq. mm Rupees One Thousand One

10 Mtr. 1149.38 Hundred Forty Nine and Paisa

Thirty Eight Only

Providing and erecting following additional parts for panel mounting MCCBs

(A)Extended operating rotary handle with pad lock with three position trip,off,on Rupees Nine Hundred Sixty One

suitable for 25A to 250 A panel mounting cat-III and Paisa Fifty Two Only

Providing and erecting following additional parts for panel mounting MCCBs Rupees One Thousand Four

77 8 (B)Extended operating rotary handle with pad lock with three position trip,off,on Ea. 1442.28 Hundred Forty Two and Paisa

suitable for 400A to 630 A panel mounting cat-III Twenty Eight Only

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with Rupees Seventy Seven and Paisa

one coat of red oxide with erection on site as per direction of engineer in charge Seventy Seven Only

with necessary grouting, cementing, plastering & finishing complete.

Providing and fixing approved make Ladder type cable tray. Made from M.S

sheet. The cable tray should be bended as per IS 2062/1079 shall be fabricated of

double bended channel section longitudinal members with single bended Channel

section. Rungs of members welded to the base of the longitudinal members at

79 250 mm c/c spacing . as per IS and shall be coated with hot dip galvanizing as

per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge..

(3) 300 X 50 X 2.0 mm Thick Rupees Three Hundred Nine and

(6) 600 X 50 X 2.0 mm Thick

Rupees Four Hundred Seventy

One and Paisa Sixty Seven Only

Providing and fixing approved make 'T' Junction for ladder type cable tray.

Made from M.S sheet steel. The Junction should be bended as per IS 2062/1079.

80 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and as per instruction of

engineer in charge.. A - 'T' Junction

(3)300 X 50 X 2.0 mm Thick 'T' Junction

Rupees Two Hundred Sixty Five

and Paisa Sixty Three Only

(6) 600 X 50 X 2.0 mm Thick 'T' Junction

Rupees Four Hundred Seventy

One and Paisa Sixty Seven Only

Providing and fixing approved make '90° Elbow' for ladder type cable tray.

Made from M.S sheet steel. The Junction should be bended as per IS 2062/1079.

81 with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erected on existing support as per Specification and as per instruction of

engineer in charge..

(3) 300 X 50 X 2.0 mm Thick

Rupees Two Hundred Twenty

Seven and Paisa Twenty Five Only

(6) 600 X 50 X 2.0 mm Thick

Rupees Four Hundred Sixty Three

and Paisa Fifty Nine Only

INTERNAL POINT WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

Rupees Five Hundred Thirty Nine

82 30 type, erected on PVC / Metallic/Wooden box, single mounting base frame Ea. 539.34

and Paisa Thirty Four Only

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box, Rupees Eight Hundred Ten and

83 10 single mounting base frame covered with textured/metallic/white front plate PT. 810.02

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

Rupees One Hundred Fifty One

84 40 metallic/white front plate , modules erected with necessary connections as per Ea. 151.5

and Paisa Fifty Only

site situation directed by Engineer In charge. (1)One No. SP 6 Amp. Cat. III

(2) One No 5 pin plug Cat.III Rupees One Hundred Fifty One

and Paisa Fifty Only

(9) 16 Amp. SP one way switch Cat.III Rupees One Hundred Eighty and

Paisa Seventy Nine Only

(10) 6/16Amp. Universal socket Cat.III

Rupees One Hundred Ninety Nine

and Paisa Ninety Eight Only

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

Rupees Thirty Three and Paisa

88 100 fittings & Junction boxes fixed with adhesive solution & Clamps with following Mtr. 33.33

Thirty Three Only

dia of pipes, in approved manner as directed (b) 25 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Seventy Eight and Paisa

PVC insulated stranded wire of green colour for earth continuity of following Seventy Eight Only

size (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees One Hundred Four and

PVC insulated stranded wire of green colour for earth continuity of following Paisa Three Only

size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated Rupees Three Hundred Twenty Six

stranded wire of green colour for earth continuity of following size (A) with and Paisa Twenty Three Only

medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be Rupees One Hundred Twenty

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Three and Paisa Twenty Two Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing Rupees Three Hundred Thirty and

box having following capacity (A) 32 Amp. Cat.III Paisa Twenty Seven Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Three Thousand Four

94 1 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to Ea. 3412.79 Hundred Twelve and Paisa

be used) suitable for (B) three phase incoming and single phase horizontal type Seventy Nine Only

outgoing Per phase isolation type (PPI) (b) sheet steel double door (iii)8 way

Supplying & erecting approved make RCCB + MCB (Electro magnetic type

only) working on residual current device having 10 KA short circuit breaking

capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS Rupees Three Thousand One

95 1 12640 test knob facility trip free mechanism operating for rated leakage at Ea. 3117.87 Hundred Seventeen and Paisa

nominal ten volt, complete erected including all materials lugs screws etc. Eighty Seven Only

completed.[f] 63A, 4 pole Three Phase

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED Rupees Five Hundred Thirty Five

LED driver efficiency > 85 % and Paisa Thirty Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (v) 40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat.III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Four Hundred Twenty

97 100 Ea. 427.23 Seven and Paisa Twenty Three

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 15 watts, Surge-2 KV-cat-lll

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Rupees One Thousand Nine

98 10 sweep complete having 3blades with aluminium blades with , canopy & 30 cm. Ea. 1948.29 Hundred Forty Eight and Paisa

down rod erected with earthing.(Make shall be approved by Engineer in charge)) Twenty Nine Only

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

Rupees One Hundred Eight and

99 15 rod erected duly painted for fan complete with proper insulation without leakage Mtr. 108.07

Paisa Seven Only

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab Rupees Forty Three and Paisa

with Making the site as original. Forty Three Only

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen and Paisa

Supplying & erecting single phase approved make industrial exhaust fan suitable

for medium duty ring mounted low noise operation suitable for medium duty Rupees Two Thousand Fifty Four

having following dia size and maximum speed in RPM [A] 305 mm dia 900 and Paisa Thirty Four Only

Supplying and erecting approved make double ball bearing oscillating type

Heavy duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s wall

mounted with height adjustment and rotary tilting device complete with guard, Rupees Four Thousand Nine Hundred

wall bracket,mounting accessories as directed. (A) 450mm Fifty and Paisa One Only

Filling the necessary application to Supply Co,Following up and getting the

supplu filling the necessary Test report to the Supply Co.All Official/statutory Rupees Twenty Five Thousand Two

104 1 fess shall be paid by clients. (HT, Transformer, and all types of Electrical Ea. 25250

Hundred Fifty and Zero Paisa Only

Licening work including)

Total Amount A+B

Total Amount A+B

Deputy Executive Engineer (Civil) Executive Engineer (Civil)

PIU,-1, Ahmedabad PIU,-1, Ahmedabad

Asst. Engineer(Elect) Dy. Executive Engineer (Elect) Executive Engineer (Elect)

Piu Ahmedabad Piu Ahmedabad Piu Ahmedabad