RECONSTRUCTION OF COLLAPSED BOUNDARY WALL AT MO V NEW SITE AND REPLACING OF EXISTING WINDOW WITH UPVC WINDOW WITH DECO GRILL IN BUILDING NO P1 AT IN DET AT VISHAKHAPATNAM

Amount

Excavation over areas n.exc 1.5m deep and getting out in soft loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/loose soil complete all as specified and directed

Removing Excavated soils to a distance exceeding 250 metres but not exceeding 500 metres and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Demolition of stone masonry wall built in cement mortar including all quions, arches, pillars etc complete all as specified and directed

M & L for plain cement concrete (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete , Design Mix M-30 (using 20 mm graded crushed stone aggregate) in slabs suspended on walls, beams and columns in floors, roofs, landings and in shelves or similar works complete all as specified and directed.

M & L for reinforced cement concrete Design Mix M-30 (using 20 mm graded crushed stone aggregate) in beams, cantilevers, lintels over 1.5 m span complete all as specified and directed.

M&L for Reinforced Cement Concrete Design Mix M-30 (using 20 mm graded crushed stone aggregate) for foundations, footing, plinth beams, bases for columns etc complete all as specified and directed.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions square, or rectangular rough finished surfaces complete all as specified and directed.

M & L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, slabs, shelves.plinth beams including supports etc, rough finished surfaces, flat complete all as specified and directed.

M & L for form work to sides of concrete foundation, footing,plinth band, bases of columns etc, rough finished surfaces, flat complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L for Mild steel TMT bars 5 mm to 10 mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for Rendering 10 mm thick on fair faces of concrete surfaces of walls in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed

M & L for Plain cement concrete type B0, (1:2:4) (using 12.5 mm graded crushed stone aggregate) in cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates and the like including necessary form work, weathering, slightly rounded or chamfered angles and throating as required complete all as specified and directed.

M & L for Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and directed.

Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , of Fe 410-W (Gde-E- 250)quality-A complete all as specified and as directed. Note : Design of Grill,Gate and others similar works shall be as approved by GE)

S& F in repairs 600 mm dia stainless steel punched tape Concertina Coil as per IS 4454 with galvanised coating and punched tape material as per IS - 513 deep drawn quality with galvanised coating, having medium barbs (barb length 24+1 mm, Pitch between two barbs 35 + 1 mm) fixed in position and secured to both sides of shaped angle iron post, stretched to a length of 8 to 10 m to achive 600 mm dia as in fencing to steel post and to another coil / MS ribs including fixing with special galvanised fasterners such as 'J' clips, 'C' clips, 'U, clips all as spe-cified and directed . Note : After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement , tenderare requested to take this in consideration while quoting their rates and no claim whatsoever in this respect shall be considered at any later stage.

S& F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) (Aluminium sliding windows) and set aside or removing from site complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm each but not exceeding 4 sqm with shutters(Without taking off shutters from the frames) (Aluminium sliding windows) and set aside or removing from site complete all as specified and directed.

S & F Powder coated Aluminium anodised grill of make "Deco grill" and DG - 104 model with apperture of size 105 x99 mm, suitable ''F'' or ''E'' section fixed to window/ventilator frame for securing Deco grill and interlock and secruing the frame to masonry wall with brass screws complete all as specified and directed.

M & L Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed (1:6) complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Making good under cills or over arches, lintels and bressummers, including all-pinning when necessary with CM1:4 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior weather coat acrylic paint(100% acrylic) over one coat of primer complete all as specified and directed

Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed

M/S Jayalakshmi Constructions

Ruchira Associates

TECHNO SOFT SOLUTIONS

AMBIKAA ENGINEERING

S R CONSTRUCTIONS

ALLURI CONSTRUCTIONS

Sri balaji Constructions

SREE VIJAYALAKSHMI ENTERPRISES

PRADEEP ENTERPRISES