General Civil Maintenance Work of Viaduct & 05 Metro Stations (i.e. Ranip, Sabarmati Railway, AEC, Sabarmati and Motera Stadium) of North-South Corridor NS-4 Section from Ranip to Motera Dead End of Ahmedabad Metro Rail Project Phase - 1

BILL OF QUANTITIES

1.0 The Bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers,

Special Conditions of contract, Scope of Work, Technical Specifications etc.

2.0 Schedule ‘A’ consists of DSR items for Civil works & AMC/R&B SOR works as detailed in Tender documents.

Tenderer has to quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘A’.

3.0 Schedule ‘B’ consists of Non DSR items for Civil works as detailed in Tender documents. Tenderer has to

quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘B’

4.0 The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’, ‘B’ are for completed

and finished items of works and complete in all respect. It will be deemed to include cost of all plants,

labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification,

contractor’s profit, taxes and establishment/overheads, together with preparation of design and drawings,

all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the

5.0 The Summary Sheet of Bill of Quantity is given in Annexure – 1. The bidder may note that the quote shall

be inclusive of all taxes. The tax bifurcations is to be given in Annexure – 2 of the BOQ.

6.0 If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-

responsive and shall be rejected.

7.0 Tenderers shall quote their offer in Indian Rupees (Rs.) only. Tenderers are required to quote percentage

(%) above/below/at par in figures in the appropriate highlighted cell in the summary sheet.

8.0 Errors will be corrected by the employer for any arithmetical errors in computation or summation as per

contract conditions.

9.0 All the unit rates/ percentages should be filled in figures. In case of any discrepancy, the value provided in

words shall be treated as sacrosanct.

10.0 The work executed against all the BOQ items in Schedule ‘A’ & ‘B’ as detailed in tender document would be

paid on measurement basis.

11.0 The contractor may raise their “On Account” payments on monthly basis as per the status of work on the

last day of the respective month.

12.0 In case of Schedule A item the description is given in brief and detailed description of item should be as

given in respective ie., DSR, AMC SOR, R&B SOR.

13.0 The financial bid is to be submitted online on https://tender.nprocure.com. The other relevant clauses of

submission of bid is clarified in ITT, Para / Clause D1 to D11

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

FINANCIAL BID FORM

To : The Managing Director,

Gujarat Metro Rail Corporation (GMRC) Limited

Address : Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar: 382010, Gujarat, India

Name of work: - “General Civil Maintenance Work of Viaduct & 05 Metro Stations (i,e, Ranip,

Sabarmati Railway, AEC, Sabarmati and Motera Stadium) of North-South Corridor NS-4

Section from Ranip to Motera Dead End of Ahmedabad Metro Rail Project Phase - 1.”

1. Having examined the site of works and Bid Documents, comprising Instructions to Bidders, Scope of

works, Conditions of Contract, Technical Specifications, Bill of Quantities I/we, the undersigned offer to

execute and complete such works and remedy any defects therein in conformity with the said bid

documents for the sum of Rs. (Refer Annexure – 1 ) or such other sum as may be ascertained in

accordance with the said Bid documents.

2. We undertake, if our Bid is accepted, to commence the work from issuance of LOA / receipt of the

order to commence the work, and to complete and deliver the sections and whole of the works

comprised in the Contract within the period (i.e. 24 Months) stated in the bid hereto.

3. If our Bid is accepted, we will furnish Performance Security (ies) in the form of a Bank Guarantee to be

jointly and severally bound on us, in accordance with the Conditions of Contract.

4. We agree to abide by this Bid for the period of One Hundred & eighty (180) days from the last date

fixed for Bid Submission and it shall remain binding upon us and may be accepted at any time before

the expiry of that period.

5. We confirm our agreement to treat the Bid documents and other records connected with the works as

secret and confidential documents and shall not communicate information contained therein to any

person other than the person authorised by the Employer or use such information in any manner

prejudicial to the safety and integrity of the works.

6. Unless and until an agreement is prepared and executed, this Bid, together with your written

acceptance thereof, shall constitute a binding Contract between us, but without prejudice to your right

to withdraw such acceptance without assigning any reasons thereof.

7. We understand that you are not bound to accept the lowest or any bid you may receive.

We attach herewith proof of submission of income tax returns along with profit & loss statement attached

with tax returns.

Yours faithfully,

Authorised Signature :

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Tender Notice No. : GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

“General Civil Maintenance Work of Viaduct & 05 Metro Stations (i,e, Ranip,

Sabarmati Railway, AEC, Sabarmati and Motera Stadium) of North-South

Corridor NS-4 Section from Ranip to Motera Dead End of Ahmedabad Metro Rail

Project Phase – 1.”

Annexure – 1 (i.e. Summary Sheet of Bill of Quantity)

Rate to be Quoted by the Tenderer

Sr. No Schedule

(in Rs.) In Figures In Words

(% above/below) (% above/below)

(DSR/SOR Items) ..

Schedule – B ……………………………………

(Non DSR Items) 1,40,00,000.00 ..

Total Amount (INR) In

Total Amount (INR) In

(Inclusive of all taxes)

1.0 The tenderer shall quote a single percentage (Above/Below/At Par ) at SN. 1 & 2 of this Summary Sheet only and nowhere els

2.0 The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be inclusive of all

3.0. The tax bifurcations to be filled in Annexure – 2 (i.e. Details of Taxes and Duties).

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

“General Civil Maintenance Work of Viaduct & 05 Metro Stations (i,e, Ranip, Sabarmati

Railway, AEC, Sabarmati and Motera Stadium) of North-South Corridor NS-4 Section from

Ranip to Motera Dead End of Ahmedabad Metro Rail Project Phase - 1.”

Summary of BOQ - NS-4 Section Phase I

Sr. no Schedule Amount

Schedule A -Provisional sum for item not covered under the

schedule of items in this BOQ.

All item of work which are not covered in BOQ but are required to be

carried out as per direction of Engineer, will be based on list of

concerned item as available in latest Schedule of Rates (SOR) of

i. Schedule of Rates DSR -2023 CPWD

ii. Schedule of Rates of SCHEDULE OF RATES FOR BUILDING

WORKS AHMEDABAD CITY (AMC) YEAR:-2023-24 issued by

GOVERNMENT OF GUJARAT ROAD AND BUILDING DEPARTMENT.

A iii. SCHEDULE OF RATES FOR BUILDINGS, ROADS & BRIDGES WORKS ₹

AHMEDABAD DISTRICT for the year 2023-24 of Road & Building

(R&B) Department of Government of Gujarat.

iv. Delhi Schedule of Rates (E&M)

v. Delhi Schedule of Rates (mechanical)

Note:The order of preference for adopting the Rates will be in

accordance with as first preference being at (i) and the last

preference being at (iii) above, till the availability of concerned items

in the respective schedule of Rates.

1 Sub-Schedule - B.1 (Doors/Windows/Railing)

2 Sub-Schedule - B.2 (Toilet/Washroom/Plumbing/PHE)

3 Sub-Schedule - B.3 (ACP/Rolling Shutter)

4 Sub-Schedule - B.4 (Carriage/Disposal)

Sub-Schedule - B.5 (Core Cutting/Expansion Joint/Grouting/Cold

Bitumen/Waterproofing/PCC)

6 Sub-Schedule - B.6 (Glass Work)

7 Sub-Schedule - B.7 (False Ceiling/Flooring/Granite)

Sub-Schedule - B.8 (Repairing Work Granite/False ceiling/False

Flooring/Door/Windows/Door Lock/Tiles/Door Handle)

9 Sub-Schedule - B.9 (PEB Painting/Bolt Tightening)

10 Sub-Schedule - B.10 (Hire Machinary)

11 Sub-Schedule - B.11 (Signage/Other Misc)

12 Sub-Schedule - B.12 (Borewell items)

13 Sub-Schedule - B.13 (Paver Block Work)

14 Sub-Schedule - B.14 (Paint Work)

B Total Amount for Schedule B ₹

B Total Amount for Schedule B ₹

Total amount in Rs. (Including GST) ₹

Total amount in Rs. (Including GST) ₹

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Schedule - B (NDSR Items)

Sr No Sub-Schedule - B.1 (Doors/Windows/Railing) Unit Rate

Providing & fixing 10mm dia stainless steel tower bolt 200mm long

1 NDSR-1 with all screws etc. complete as directed by engineer in charge. Each ₹

Providing & fixing of stainless steel L-drop 12 inch with all nuts, screws

drilling by employing skilled carpenter in non-fire door along with a

2 NDSR-2 Each ₹

pad lock (pad lock make; Harrisons or its equivalent) all complete as

per the direction of Engg-in-charge.

Providing and fixing stainless steel D-shaped door handle as confirming

to grade 304.(Minimum length of 200 mm to 250mm, Make-dorma or

3 NDSR-3 Each pair ₹

equivalent) complete as per direction of engineer in charge.

Providing and fixing chromium plated brass 100mm mortice latch

4 NDSR-4 and lock with 6 levers and a pair of lever handles of approved Set ₹

quality with necessary screws etc. complete.

Providing and fixing panic bar / latch (Double point) fitted with a single

body, Trim Latch & Lock on back side of the Panic Latch of reputed

brand and manufacture to be approved by the Engineer- in- charge, all

Providing and fixing Aluminium door stops/wall stoppers to flush

6 NDSR-6 doors or panelled solid and glazed doors, etc., complete as per Each Shutter ₹

drawings and directions of engineer in charge.

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS :

embossed on the body, door weight upto 36 kg to 80 kg and door

7 NDSR-7 each ₹

width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

8 NDSR-8 Providing & fixing EL Bihari hinge in aluminium door /window Each Set ₹

Providing & fixing of aluminium handle set with locking arrangement

for aluminium window shutter as per approved quality with required

9 NDSR-9 Each ₹

screws complete as per direction of Engineer-in-Charge.

Providing and fixing of high pressure laminated board confirming to

code BS EN-438-2015 of 12mm thickness for partition and doors with

all necessary fittings, fasteners, screws and rubber strip for the groove

10 NDSR-10 in the plaster for reducing noise level of door closing etc. required as Sqm ₹

per approve design and colour, complete as per direction of engineer

Spraying and applying aldrine for anti-termite treatment of wall doors

and wooden cupboard /almirah and kitchen cabinet. Aldrine to be

sprayed on wall by making hole using drilling machine and on doors &

wooden cupboard/almirah and kitchen cabinets by

injection/gun/applicator. Work will be carried out in presence of

11 NDSR-11 qualified supervisor to ensure safety of applicator and other staff as Each ₹

well as residents of the flats. Rates are inclusive of all required

material, machine, gun and all skilled and unskilled labour, lead and

lift, ascent-decent complete as per direction of Engineer-in-Charge.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by

12 NDSR-12 SMT ₹

mass) is recommended 10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of surface is recommended as per

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

13 NDSR-13 6131_paret-II Consentration Weight one percent is recommended i.e SMT ₹

one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by mass)

is recommended i.e one litre chemical emulsion diluted with 19 liter

14 NDSR-14 SMT ₹

oil base. Total solution will be 20 liters inclusive of one liter chemical

emulsion application at the rate of 7.5 litre chemical / Sqm of surface

is recommended as per I.S.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners

15 NDSR-15 stainless steel bolts etc., of required size, on the top of the floor or the Kg ₹

side of waist slab with suitable arrangement as per approval of

Engineer-in-charge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as

nuts, bolts, steners etc.).

Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

16 NDSR-16 Kg ₹

including applying priming coat of approved steel primer. M.S. tube

Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position

17 NDSR-17 and applying a priming coat of approved steel primer, including Kg ₹

welding and bolted with special shaped washers etc. complete. Hot

finished welded type tubes

Sr No Sub-Schedule - B.2 (Toilet/Washroom/Plumbing/PHE) Unit Rate

Providing and fixing of CI grating 200x200 mm with all required

18 NDSR-18 materials and labour complete as per direction of Engineer-in-Charge, Each ₹

nothing shall be paid extra.

Providing and fixing Floor trap Stainless Steel jali over existing floor

19 NDSR-19 Nos ₹

Providing and fixing white vitreous china pedestal type water closet

(European type )with seat and lid, 10 litre low white various china

flushing system & C.P flush bend with fittings & C.I Basets, 40mm flush

bend, overflow arrangement with special of standard make and

20 NDSR-20 Each ₹

mosquito proof coupling of approved municipal design complete

including painting of fittings and brackets, cutting and making good the

walls and floors wherever required.

Providing and fixing Flushing Cistern (Make - Hindware or Equivalent)

21 NDSR-21 Each ₹

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing and fixing wash basin with C I brackets, 15 mm C. P. brass

pillar taps, 32mm C.P. brass waste of standers pattern including

painting of fittings and brackets , cutting and making good the walls

22 NDSR-22 Each ₹

wherever require. White Vitreous China wash basin size 630x450 mm

with a pair of 15mm Cc.P brass pillar taps

Providing and fixing Angle Valve (Make - Jaquar or Equivalent) Code:

23 NDSR-23 Each ₹

Providing and fixing Bib Cock (Make - Jaquar or Equivalent) Code: FLR-

24 NDSR-24 Each ₹

Providing and fixing Pillar Cock (Make - Jaquar or Equivalent) Code:

25 NDSR-25 Each ₹

Providing and fixing of jet spray with flexible tube made of Volga or

26 NDSR-26 Each ₹

approved quality.

Providing and fixing of bib cock with health faucet with flexible pipe of

appropriate length with a separate stop cock for the health faucet. The

27 NDSR-27 Each ₹

cost to include all fittings and fastenings all complete as required

Providing and fixing PVC Connection (Make - Jaquar or

28 NDSR-28 Each ₹

Equivalent)Code: ALD-805

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm size with automatic

flushing cistern with standard flush pipe and C.P brass spreaders with

29 NDSR-29 brass unions and GI clamps complete, including painting of fittings and Each ₹

each brackets cutting and making good the walls and floors wherever

required. One urinal wash basin with 5 litre white PVC automatic

flushing cistern

Providing and Fixing of WC seat Cover , complete with all accessories

30 NDSR-30 required as per direction of Engineer-in-charge. Each ₹

CERA make (B1510108) or equivalent

Cleaning of chocked sewer line by diesel running vehicle mounting

hydraulic operated high pressure suction cum jetting sewer cleaning

machine fitted with pump having 4000 litres suction capacity and

litres water jetting tank capacity including skilled operator, supervising

31 NDSR-31 engineer etc. for cleaning and partial desilting of manholes and Metre ₹

dechocking of sewer lines. Dechocking and flushing of sewer line from

one manhole to another by high pressure jetting system of 2200 PSI

for sewer line from 150 mm dia upto 300 mm

Testing of potable water as per the standard of local (As per IS 10500)

32 NDSR-32 water supply authority (I/c supplying of water sample to the Each ₹

laboratory) and providing the sample test report to EIC.

Cleaning of underground water tank of all the sections/Capacity of

tank by emptying of water in other tanks or in a separate storage

device to avoid the wastage of water. The rates are inclusive of all

taxes, men, materials, safety equipments and other required

33 NDSR-33 resources. Nothing shall be paid extra and work shall be paid extra and Per Tank ₹

work shall be carried out as per direction of Engineers in charge. The

tank shall be cleaned on half yearly basis and report shall be submitted

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Cleaning of terrace/loft water storage tank (inside surface area) upto

2000 litre capacity at all heights with coconut brushes, duster etc.,

removal of silt, rubbish from the tank and cleaning the tank with fresh

water disinfecting with bleaching powder @ 0.5gm per litre capacity of

tank including marking the date of cleaning on the side of tank body

with the help of stencil and paint and disposing of malba all complete

34 NDSR-34 as per direction of Engineer-in-Charge. (The old date already written litre ₹

on tank should be removed with paint remover or black paint and if

date is not written with the stencil or old date is not removed

deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI

fittings or ball cock is damaged that is to be repaired by contractor

at his own cost and nothing extra will be paid on this account)

Providing and fixing UPVC soil and waste pipes ISI marked / SWR with

solvent cement / rubber ring joints and further protected with

fibreglass paste, including all specials such as bends, tees, reducers etc

with or without door as required, including any cutting and making

35 NDSR-35 good of floors / walls that may be necessary, clamps and stays as per

requirements. The pipes laid above the floor level (sunken level)

should be rigidly fixed with PCC bedding and levelled at every one

metre intervals

36 NDSR-35.1 [A] 50mm Dia 6 Kg/cm2 Rmt ₹

37 NDSR-35.2 [B] 75mm Dia 6 Kg/cm2 Rmt ₹

38 NDSR-35.3 [C] 110mm Dia 6 Kg/cm2 Rmt ₹

39 NDSR-35.4 [D] 160mm Dia 6 Kg/cm2 Rmt ₹

PVC PIPE 160 MM: Providing and laying 160mm dia & 6kg pressure

40 NDSR-36 PVC pipe for drainage, all work complete as directed by engineer in Rmt ₹

charge. (make - as per approved list).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipes & fittings

with one step CPVC solvent cement, trenching, refilling & testing of

joints complete as per direction of Engineer in Charge.

42 NDSR-37.1 [A] 15 mm. Rmt ₹

43 NDSR-37.2 [B] 20 mm. Rmt ₹

44 NDSR-37.3 [C] 25 mm. Rmt ₹

45 NDSR-37.4 [D] 32 mm. Rmt ₹

46 NDSR-37.5 [E] 40 mm. Rmt ₹

47 NDSR-37.6 [F] 50 mm. Rmt ₹

Providing and fixing PVC P-trap /multi-trap /Nahani-trap of 110mm dia

for kitchen /bathroom with demolishing of kota stone/cement

concrete flooring of required area or up to 1.0 sqm for rectification of

seepages and repairing the same as above, including the cost of

48 NDSR-38 Each ₹

materials i.e. PVC P-trap/multi-trap/Nahani trap, solvent, piece of PVC

pipe, Kota stone, cement concrete or other materials, labour charges,

taxes etc. complete as per direction of Engineer-in-charge.

Providing and fixing UPVC/CPVC ball valve of approved quality, High or

49 NDSR-39 low pressure ,with plastic floats complete as directed by engineer in

50 NDSR-39.1 20 mm nominal bore Each ₹

51 NDSR-39.2 25 mm nominal bore Each ₹

52 NDSR-39.3 32 mm nominal bore Each ₹

53 NDSR-39.4 40 mm nominal bore Each ₹

54 NDSR-39.5 50 mm nominal bore Each ₹

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

55 NDSR-39.6 65 mm nominal bore Each ₹

Mirror of staff toilet - Providing and fixing toilet mirror made of 6mm

thick BWP ply with craft paper fixed to wall with screws/wooden plugs

56 NDSR-40 5mm thick float glass mirror etc. including all necessary arrangement Sqm ₹

complete as per direction of engineer in charge. (Make - as per

approved list).

Providing and fixing vitreous toilet paper holder of vitr with mortar /

57 NDSR-41 white cement with all fittings and fastenings all complete as required Nos ₹

Providing and fixing of CP grab rail in PWD Toilet. The cost to include

58 NDSR-42 Nos ₹

all fittings and fastenings all complete as required

Providing and fixing Urinal Partition of 20mm thick of approved

59 NDSR-43 material granite as specified. The cost shall include all fittings and Nos ₹

fastenings all complete as required

Providing and fixing automatically operated Hand Dryer with in-built

60 NDSR-44 heating unit and twin blowers of NovoTech or equivalent make Nos ₹

Supply and Fixing PVC floor trap 125 x 75mm self-cleansing design with

or without vent arm, Inlet receiving cap of 50 & 40mm dia complete

61 NDSR-45 Nos ₹

Including cutting and making good the walls and floors

Supply of materials & Constructing brick masonry Rain Water

Chambers with !!. 'A' class Table Molded bricks in cement mortar 1:S

62 NDSR-46 (1 cement: 5 fine sand), !. R.C.C. Top slab"wlth 1:2:4 Mix (1 Cement:

coarse sand: 4 graded stone ,s aggregate), foundation concrete

63 NDSR-46.1 Inside size of 600 x 600 depth of 600mm with RCC cover Each ₹

Supply installation testing and commissioning water cooler having

nominal cooling capacity of 40 liters per hours, with 40 liters storage

tank with 2 nos. of faucets, one no goose neck type (for glass filling)

and other one fountain type {for drinking} both with separate

64 NDSR-47 Set ₹

mechanical lever control with 1.5 HP electric otor for compressor to

work on one phase 230 volts SO Hz AC power supply WI th complete

accessories including cutting and making wall as required.

Sr No Sub-Schedule - B.3 (ACP/Rolling Shutter) Unit Rate

Providing and fixing (Aluminium Composite Panel) Sheet any colour on

existing frame as per requirement all complete in all respect as per

65 NDSR-48 direction and satisfaction of Engineer-in-Charge sqm ₹

4mm thick ACP (FR grade) of Aludecor ALAS color AD09

Annual repairing and maintenance of exixting rolling shutters including

dismentaling shutter and refinig the same and fixing of new items as

per requirement including cleaning,oiling,greasing,alignment and

testing complete.The cost of new items will be paid separatly except

66 NDSR-49 small hardware like nuts/bolts and nails which are included in this Each ₹

item.The scopre of work includes checking of shutters for smooth

functioning quarterly or as & when requires in emergency.

Providing hardware or other parts for smooth functioning of rolling

67 NDSR-50 shutter, items will be supplied as per CPWD specifications.

68 NDSR-50.1 Brackets (sides) Each ₹

69 NDSR-50.2 Wire spring Each ₹

70 NDSR-50.3 Spring holder Each ₹

71 NDSR-50.4 MS-Gararee device Each ₹

72 NDSR-50.5 Gear -Box Each ₹

GMRC Page 10 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

73 NDSR-50.6 Rolling shutter Handle Each ₹

74 NDSR-50.7 Locking Naka/Kundee including welding Each ₹

75 NDSR-50.8 Ball Bearing Each ₹

76 NDSR-50.9 Gararee Rod Each ₹

77 NDSR-50.10 MS-Top Cover Mtr ₹

78 NDSR-50.11 Bottom Locking rail Mtr ₹

79 NDSR-50.12 M.S. Lathe Mtr ₹

80 NDSR-50.13 MS pipe shaft 2" dia Mtr ₹

81 NDSR-50.14 Side guide rail Mtr ₹

82 NDSR-50.15 MS Grill (for existing pattern) Sqm ₹

83 NDSR-50.16 Rolling shutter lever lock Each ₹

Oiling & greasing, repairing and welding of rolling shutter with

84 NDSR-51 accessories fittings all work completed as per direction of engineer in Each ₹

charge.(Accessories will be paid extra).

Sr No Sub-Schedule - B.4 (Carriage/Disposal) Unit Rate

Supply of canter on hire charges basis, for carriage of any material

85 NDSR-52 Each ₹

from metro stations to GMRC depots.

Clearing grass / bushes from ground level with the help of tractor

mulcher assembly/talwar/ hand held grass / bush cutting machine

including machine operator, fuel and all kind of blades required for

86 NDSR-53 cutting grass stems of bushes upto 5 cms dia at a height of 15 cms Sqm ₹

from ground level and disposal of material so cleared within 50m lead

and as per satisfaction of E-I-C.

Disposal of Malba away from the premises through Dumper. Rates are

87 NDSR-54 Per Trip ₹

for each trip. (Minimum quantity of Malba = 8 cum).

Sub-Schedule - B.5 (Core Cutting/Expansion Joint/Grouting/Cold

Sr No Unit Rate

Bitumen/Waterproofing/PCC)

88 NDSR-55 Core cutting as per direction of engineer incharge

a) Core cutting work in RCC structure(Vertical as well as horizontal) -50

89 NDSR-55.1 Inches Depth ₹

b) Core cutting work in RCC structure(Vertical as well as horizontal) -

90 NDSR-55.2 Inches Depth ₹

Providing and fixing Hilti Chemical fastener HIT-V-5.8, M12x220mm of

12mm dia. including injecting HIT-RE 500 V3 chemical grout using

injection gun including drilling of hole in RCC, concrete or brick

91 NDSR-56 masonry, cleaning the hole with pump, fixing the fastener, injecting Each ₹

the chemical etc. as per direction of Engineer-in-Charge (Work during

block hours in night) rates are inclusive of GST and Carriage.

Providing, cutting and fixing Hilti chemical fastener M16x200mm with

HILTI chemical grout RE 500 V3 including drilling of hole in RCC,

Concrete or brick masonary, cleaning the hole with blow out pump,

92 NDSR-57 Each ₹

fixing the fastener with chemical grout using chemical injecting gun

etc. complete as per direction of Engineer-in-charge.

Applying bonding agent on old surface of concrete including cleaning

93 NDSR-58 and preparation of surface with all T&P. (make - as per approved list ). per set ₹

Expansion Joint: Compression seal joint

Providing and installing compression seal joint confirming to

specification including provision of edge beams at end edges of both at

94 NDSR-59 RM ₹

joining precast diaphragm segments, cast in situ units and all related

operations as required to complete the work as specified in

specifications.

GMRC Page 11 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Cleaning of existing joints (Expansion dummy and construction joints)

by removing old existing sealing compound by kerosene oil, drying

with blow lamp and filling again with Polysulphide Sealant of approved

95 NDSR-60 Mtr ₹

make including painting the sides of slabs with primer of approved

make complete as per satisfaction of Engineer-in-charge.

Providing , placing and pasting Silicone Sealant WX of approved make

for sealing the surface of concrete to aluminium, aluminium to glass

aluminium to aluminium, aluminium to masonry surface etc. With

96 NDSR-61 Mtr ₹

preparing the surface and placing the sealent with the help of gun

,complete in all respect as per satisfaction of E.I.C.

Providing and pasting of Sika multiseal tape 100 mm wide at all

97 NDSR-62 locations including all T&P, labour etc for cleaning the surface, Mtr ₹

applying the tape all complete as per direction of EIC.

Providing and supplying CICO Grout V1, premixed ultra high strength

98 NDSR-63 non-shrink cementitious grout or equivalent as approved by Engineer- Bag ₹

Supplying of micro concrete chemical in 25 kg per bag make as per

99 NDSR-64 Each ₹

approved list of GMRC.

Supplying Cold Bitumen to site as per per dirction of Engineer-in-

100 NDSR-65 Each Bag ₹

Providing, mixing and applying SBR polymer (of approved make)

modified Cement mortar in proportion of 1:4 (1 cement: 4 graded

coarse sand with polymer minimum 2% by wt. of cement used) as per

specifications and directions of Engineer-in-charge.

Note: Measurement and payment: The pre-measurement of thickness

shall be done just after the surface preparation is completed and

101 NDSR-66 Payment under this item shall be made only after proper wet curing

has been done and surface has been satisfactorily evaluated by

sounding / tapping with a blunt metal instrument and/or the 75mm

size cube crushing strength at the end of 28 days to be not less than

102 NDSR-66.1 12 mm average thickness. Sqm ₹

103 NDSR-66.2 25 mm average thickness in 2 layers. Sqm ₹

PROVIDING AND LAYING SBR POLYMER AND CEMENT MIXTURE (1:3)

104 NDSR-67 Sqm ₹

PROVIDING AND LAYING APP MODIFIED POLYMERIC MEMBRANE (3

105 NDSR-68 MM THICK, REINFORCED WITH GLASS FIBRE MATT) Sqm ₹

Providing and applying polysulphide sealant including cost of backer

106 NDSR-69 rod and application of primer of different location as per direction of RM ₹

Engineer-in-Charge for groove of size 80mm width

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources

107 NDSR-70 : 8 graded stone aggregate 40 mm nominal size derived from natural Cum ₹

Sr No Sub-Schedule - B.6 (Glass Work) Unit Rate

108 NDSR-71 Providing & fixing in position glass

109 NDSR-71.1 5 mm thick heat reflecting glass Sqm ₹

110 NDSR-71.2 Extra for toughening 5 mm thick clear float glass Sqm ₹

Providing and fixing 6mm-10mm thick clear float glass in aluminium

door, window, ventilator, shutter and partitions etc. with PVC and

111 NDSR-72 neoprene gasket etc. complete as per architectural drawing and as per Sqm ₹

the directions of engineer in charge. (make - as per approved list)

GMRC Page 12 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing and fixing of structural toughened glass 13.52 mm(

6.00+1.52+6.00) in all locations of metro stations including the cost of

sealing gaps with clear / coloured sealant / silicon of approved make

112 NDSR-73 Sqm ₹

and brand, cutting of groove (wherever required ) including fixtures &

fitings etc. complete as per site requirement. ( make- as per approved

Providing and replacing 1000 mm TO mirror, covered with powder

coated covering having sun shade to existing hanging member support

from station roof/floor at the location as directed by Engineer- in -

113 NDSR-74 Each ₹

charge. Rates are inclusive of all material, labour, scaffolding, cartage

and all taxes etc. all complete.

Providing and fixing toughened glass in partitions ,doors, faced,

counter etc. supported at bottom and sides with all necessary fitting

and fixture of approved make the glass to be fixed in wall/S.S pipe/M.S

114 NDSR-75 framed structure as per approved design complete as per direction of

EIC(frame work and fittings to be paid separately and for payment

glass area only will be measured)

115 NDSR-75.1 a) 12 mm thick toughened glass Sqm ₹

116 NDSR-75.2 b) 10 mm thick toughened glass Sqm ₹

117 NDSR-75.3 c) 8 mm thick toughened glass Sqm ₹

118 NDSR-75.4 d) 6 mm thick toughened glass Sqm ₹

Sr No Sub-Schedule - B.7 (False Ceiling/Flooring/Granite) Unit Rate

Providing and fixing tiled false ceiling of approved materials of size

x 595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections (galvanized @ 120 grams

/sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to ger required length and of size 24 x 38 mm made from

0.30mm thick (minimum) sheet, spaced at 1200mm centre to centre to

form a grid of 1200 x 600mm and secondary cross "T" of length

600mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet

to be interlocked at middle of the 1200 x 600 mm panel to form grids

of 600x600 mm and wall angle of size 24x24x0.3mm and laying false

ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to be suspended from

119 NDSR-76 ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling Sqm ₹

with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable

rods with galvanised butterfly level clips of size 85x30x0.8mm spaced

at 1200mm centre to centre along main T, bottom exposed width of

24 mm of all T-sections shall be pre-painted with polyester paint, all

complete for all heights as per specifications, drawings and as directed

by Engineer-in-charge. Providing and fixing of Flex alum metal tile

ceiling system manufactured by M/s. Hunter Douglas India Pvt. Ltd or

equivalent comprising of tile of 600 mm wide and 600 mm long

manufactured out of 0.50mm thick GI perforated for desired openings

and patterns giving a 22% open area. The tile will be manufactured on

advanced equipment that includes several levelling stages in the

GMRC Page 13 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing and Installing in position as per approved sample reflected

ceilings plans 1200x600 perforated metal panel ceilings demountable

tray type made up of minimum 1mm thick manufactured from GI

corrosion resistant steel/ multi layer coil coated sheets/ rolls. The

pitch and dia of perforations shall be as per approved design. The tiles

shall be laid down on a suitable grid system made up of minimum

1.5mm thick roll formed galvanised steel sections. with suitable

suspension system with hangers placed at a maximum distance of

2400mm centre to centre. The ceiling system shall be powder coated

to approved shade & colour with a minimum thickness of S5 microns.

On the top of the ceiling panel shall be lined with factory fitted non

120 NDSR-77 woven accoutic felt of soundtex or equivalent make, with a NRC value sqm ₹

of 0.70. The celling system shall have provision of fixing of lights,

diffusers, speakers as per systems contractors requirements. The

ceiling system shall have an easy mechanism of removing the tiles for

inspection and access of the services above.

Provision of special access panels to be made where marked on the

drawings. All the suspension system and substructure cost ls Included

Providing and fixing in position GI Gutter of 2mm thick sheet of

approved quality including fabrication and erection with self tapping

screws epdm washers with necessary laps and stiffeners, application of

121 NDSR-78 Sqm ₹

sealant, making provision for drainage spout with all leads and lifts etc.

Complete as per drawing and specifications. ( Measurement to be as

per profile area)

Providing and fixing removable raised/ false access flooring with

system and its components of approved make for different plenum

height with possible height adjustment upto 50mm, comprising of

modular load bearing floor panels supported on G.I. rectangular

stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-

charge consisting of:a) Providing at required spacing to form modular

frame work, pedestals made out of GI tube of thickness minimum

mm and 25mm outer diameter, fully welded on to the G.I. Base plate

of size 100mm X 100mm X 3mm at the bottom of the pedestal tube,

G.I. pedestal head of size 75mm x 75mm x 3.5mm welded with GI fully

threaded stud 16mm outer diameter with two Gi check nuts screwed

on the stud for level adjustment upto 50mm, locking and stabilizing

122 NDSR-79 the pedestal head in position at the required level. The pedestals shall Sqm ₹

be fixed to the subfloor (base) through base plate using epoxy based

adhesive of approved make or the machine screw with rawl plug.b)

Stringers system in all steel construction hot dipped galvanized of

rectangular size 570x20x30x0.80mm thick having holes at both ends

for securing the stringers on to the pedestals head using fully threaded

screws ensuring maximum lateral stability in all directions, the grid

formed by the pedestal dns stringer assembly shall receive the floor

panel, this system shall provide adequate solid, rigid support for access

floor panel, the system shall provide a minimum clear uninterrupted

clearance between the bottom of the floor for electrical conduits and

wiring etc. all complete as per the architectural drawings, as specified

GMRC Page 14 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing and fixing 10 mm thick acid and / or alkali resistant vitrified

tiles of approved make and colour using acid and /or alkali resisting

mortar bedding and joints filled with acid and / or alkali resisting

123 NDSR-80 cement as per IS:4457 complete as per the direction of Engineer-in- Sqm ₹

charge. For flooring on a bed upto 30 mm thick mortar 1:4 (1

appropriate cement : 4 coarse sand).

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8mm having with water absorption less

than 0.5% and conforming to IS: 15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi

124 NDSR-81 modals location etc., laid on 20mm thick base of cement mortar 1:4 Sqm ₹

(1cement : 4 coarse sand) in all shapes & patterns including grouting

the joints with white cement mixed with matching pigments etc.

complete as per direction of Engineer-in-Charge.

Providing and laying broken white glazed China mosaic flooring for

plain and curved surfaces on terraces, floors, balconies, roofs etc.

comprising of 12mm to 20mm size broken pieces of ceramic/ glazed

tiles, laid over cement mortar 1: 3 bedding on plain or sloped surfaces.

The Treatment includes preparation of surface as required for water

proofing of roofs, balconies, terraces etc consisting of following

operations: (a) Apply of slurry coat of neat cement using 2.75 kg/sqm

of cement admixed with water proofing compount confirming to IS

2645 and approved by engg. incharge over the slab including adjoining

walls upto 300mm height including the cleaning the surface before the

treatment. (b) Laying brick bats with mortar using broken bricks/ Brick

bats 25-115mm size with 50% cement mortar (1:5) admixed with

water proofing compound confirming to IS 2645 and approved by

125 NDSR-82 engg. incharge over 20mm thick layer of cement mortar of Mix 1:5 Sqm ₹

admixed with water proofing compound confirming to IS 2645 to

required slope and treating similarly the adjoining walls upto 300 mm

height including rounding of junctions of walls and slabs. (c) After

days of proper curing applying coat of cement slurry using 2.75kg/sqm

of cemment admixed jointless cement mortar of mix 1:4 admixed with

water proofing compound confirming to IS 2645. (d) Providing and

laying broken white glazed China mosaic flooring for plain and curved

surfaces on terraces, floors, balconies, roofs etc. comprising of 12mm

to 20mm size broken pieces of ceramic/ glazed tiles, laid over cement

mortar 1: 3 bedding on plain or sloped surfaces. The flooring shall be

tamped to bring the cement mortar cream upto the surface, including

Providing and laying vitrified floor tiles of light and dark shades, in

different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS : 15622, of

approved make, in all colours and shades, laid on 20mm thick cement

mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints

126 NDSR-83 (paper joints) with white cement and matching pigments etc., Sqm ₹

complete. Size of Tile 600x600 mm. Laser machines shall be used for

cutting tiles for cut / corner tiles and the cut edges shall be grounded

smooth to obtain straight and hairline joints.

GMRC Page 15 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing, laying, jointing, grouting including fixing in position to

backing, prepolished, 20 mm thick granite, in sizes not less than

600x1200x20mm and rubbed to smooth mirror finish for

Veneering/Cladding work to walls, beams, columns, pilasters, fascia,

upstands, jambs, sills, copings, soffits of openings and beams, with

grout mortar of thickness to be ascertained at site so as to achieve

true lines, levels, plumb, planes etc. subject to a minimum thickness of

20 mm for the grout cement mortar 1:4, and making of openings for

service and other outlets etc. all to pattern, design and details as per

drawings or as directed and including preparing the backing to receive

127 the granite work, white cement mortar, mixed with pigment to

NDSR-84 match colour of granite for bedding and jointing, including curing, Sqm ₹

rubbing, sand blasting, washing, cleaning, providing cut-out for

services, machine cutting, providing machine drilled holes, recesses,

rebates for stainless steel attachments/ fixings, providing movement

joints etc. all as per drawings, specifications and as directed

complete (stainless steel attachments/fixings shall be paid

separately). Provision to be made for "V" groove as per drawing,

design and as approved by engineer. All shades and textures of

granite available in Quarries of Nearby states (Gujarat, Rajasthan etc.,)

Providing, laying mirror polished granite stones 20mm thick, all to

required sizes, design, details and pattern as per drawings,

including diagonal, inlays, borders, margins in one or more types of

stone over prepared base mortar with ordinary Portland Cement, fit

jointed with/ without groove, with white cement slurry mixed with

pigment to match shade of granite including all finishing, all as

required, as per specifications and drawings and as

directed complete in floors, landings with upto 30mm thick base

cement mortar 1:4 (1 cement : 4 coarse sand) using hairline finish

(unless otherwise specified) and curing, rubbing, mirror polishing /

honing / sand blasting, washing, cleaning, making cut out

128 NDSR-85 for services as instructed etc.. Note: Mirror Sqm ₹

polished granite of all shades and textures available in Quarries of

Nearby States (Gujarat, Rajasthan etc.,), In approved polished

(mirror/honed) Base Light Coloured Granite stone slabs in minimum

size 1200 mm x 600 mm in flooring, In approved polished

(mirror/honed) Dark Coloured Type-1 Granite stone slabs in minimum

size 1200 mm x 600 mm in flooring, In approved polished

(mirror/honed) Dark Coloured Type-2 Granite stone slabs in minimum

size 1200 mm x 600 mm in flooring, In approved sand blasted Light

Coloured Granite stone slabs in minimum size 1200 mm x 600 mm

in flooring, In approved sand blasted Dark Coloured stone slabs in

129 NDSR-86 Dismantling of granite Sqm ₹

Sub-Schedule - B.8 (Repairing Work Granite/False ceiling/False

Sr No Unit Rate

Flooring/Door/Windows/Door Lock/Tiles/Door Handle)

Repairing and refixing of door/windows shutter including removal of

shutter from chaukhat cutting where necessary removing and refixing

130 NDSR-87 butt hinges on other side of frame of shutter wherever required. (Cost Each ₹

of hinges including fixing shall be paid extra).

Repairing of existing aluminium door and windows I/c opening the

131 NDSR-88 section and refining the section as per the existing as per direction of Each ₹

GMRC Page 16 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Repair of loose/damaged aluminium expansion joint strip with GP-2

132 NDSR-89 Sqm ₹

or equivalent at Platform and concourse level.

Refixing of dry cladding upto 10 metre heights with 300mm thick gang

saw cut stone with (machine cut edges) of uniform colour and size

upto 1m x 1m, fixed to structural steel frame work and/or with the

help of cramps, pins etc. and sealing the joints with approved weather

133 NDSR-90 Sqm ₹

sealant as per Architectural drawing and direction of Engineer-in-

charge. (The steel frame work, stainless steel cramps and pins etc. shall

be paid for seperately).

refixing of old 15-30mm thick granite stone of required size and shape

of approved shade, colour and texture in footpath,flooring in road side

plasaz ,concourse,platform and similar locations, laid over 20mm thick

134 NDSR-91 base of cement mortar 1:4 incliuding grounting the joints with white Sqm ₹

cement mixed with mathing pigment, epoxy touch up etc. asper

direction of Engineer incharge.

Replacing existing floor tiles/granite including cutting existing fixed

tile/granite, dismantling tile/granite, removing all debris, cleaning and

fixing new tile/granite using suitable adhesive of Laticrete or approved

135 NDSR-92 Sqm ₹

equivalent, all complete as per direction and satisfaction of Engineer-

in- Charge. (This item does not include cost of Tile/Granite which shall

Repairing/strengthening of existing raised false floor consisting of

pedestal and floor panels by providing extra support like the provision

of stringers made of 25mm MS square pipe etc. All complete as per the

direction of the engineer in charge. The rates are inclusive of each

individual materials, labours, machining/equipments all lead, lifts,

136 NDSR-93 transportation, painting and priming of stringers with anti Sqm ₹

corrosive/fire retardent paints etc. complete, panels will be properly

re-fixed by maintaining its shape, size, level, alignments free from any

undulation etc.complete.

Sr No Sub-Schedule - B.9 (PEB Painting/Bolt Tightening) Unit Rate

Removing of old paint, rust with help of power tool and preparing the

surface to various standards (ASA 3.0) before application of primer.

The rate will include all the tools, paints, labour and other

137 NDSR-94 consumables and incidental charges. Nothing extra shall be paid Sqm ₹

except item no. 2, 4 & 5. The surface which are not accessible with the

help of power tool shall be prepared by the wire brush.

Cleaning the surface (roof truss at platform level) with detergent, wire

brush, tools for (inaccessible area) and making dust free. The work

shall be carried out as per direction of engineer-in-charge and include

138 NDSR-95 Sqm ₹

all labour, maternilas. tools, plants, ladders, scaffoldings, spider, sfaety

blets ect. all complete ( surface preparation to chaleve St2).

Covering of flooring with terpoline to avoid any stain mark at granite

floors on daily basis including labour charges for spreading and rolling

139 NDSR-96 Sqm ₹

back daily. (The dust collected should be disposed off to the specified

GMRC Page 17 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing and fixing of PP spider with necessary scaffolding, ladders,

materiakls, machines upto the height of 8m at platform shed with all

lead, lifts ascent, descent and transportation etc. All complete rates

are inclusive of all highly skilled and semi-skilled labour. work wil be

140 NDSR-97 Sqm ₹

carried out strictly in non- operational hours as per direction of

engineer-in-charge. Wherever Spider net not possible to fix, payment

of scaffolding may be be given seperatly.

Applying surface tolerant epoxy coating in two coats with epoxy based

primer with minimum DFT of 200 micron and volume of solids not less

141 NDSR-98 than 75%. Paint is to be applied with spray painting in places where its Sqm ₹

inaccessible it may be applied with brush. (Item to be used where

surface is having scaling)

Application of finishing coat of(UV resistant coat) of minimum

142 NDSR-99 Sqm ₹

micron thickness on surface which is not having any scaling

Tighting of loose bolts pof all angles bracings in roof truss PEB

Structure by fitter/welder up to required torque using necessary T&P

as per direction of Engineer- In - Charge. Work will be carried out by

using existing arrangement of PP spider net with neccessary

scaffolding ladder etc.done during truss painting of same station (No

extra payment will be given for height or any other arrangement, extra

143 NDSR-100 payment will be given for additional MS plate/bolts/etc. if any). Per station ₹

(Remark: If Only Tightening of Roof truss PEB Structure nut bolts is

carried out and painting is not executed, Payment will be made extra

for extra arrangement of PP Spider and necessary scaffolding at rate of

NDSR 104) (To be carried out Annually for Metro stations)

Providing and fixing of Hi-tensile galva lume steel sheets of 0.5mm

thickness for metro stations roof sheeting at all levels and height

including all tools, materials, labours, safety equipments, etc all

complete as per direction of engineer in charge. (make-as per

144 NDSR-101 Sqm ₹

approved list) of requined shape, colur and size rate is also inclusive

dismantling of old hanging/ damaged roof sheets and stacking of the

same at station premises as per directions.

Providing and fixing 10 mm thick poly carbonate sheet make GE or

equivalent and make confirming to IS 14443:1987) of required colour,

145 NDSR-102 fasteners, silicon sealant, EPDM gaskets and shade including self- Sqm ₹

drilling/self-taping screw as per requirement.

"Providing and repairing the damaged concrete portion with single

component, fibre reinforced, dual shrinkage-compensated thixotropic,

cementious patch repair mortar (having the technical parameters

mentioned in material specifications) capable of applying 25 mm thick

in single layer initially by hand and finishing with trowed carefully

compacting the same around the rebars and finishing to bring it in line

146 NDSR-103 with existing concrete surface with an average specified thickness Sqm ₹

inclusive of manpower, material and equivalent Master Emaco 5348 of

BASF renderoc HB-60 of Fosroc/Sikadur 41 of Sika or equivalent.

(a) 25 mm thickness"

Sr No Sub-Schedule - B.10 (Hire Machinary) Unit Rate

GMRC Page 18 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing, hiring, operating and maintaining Telescopic Manlift having

boom length of 25–30 meters on hire basis, complete in all respects

including deployment of skilled operator (driver), helper, fuel (diesel),

lubricants, insurance and all maintenance (routine, preventive and

breakdown), repairs, insurance, statutory approvals, permits and all

operational costs as directed by the Engineer-in-Charge (EIC);

The equipment shall be kept in safe, efficient and fully functional

condition at all times, and in case of breakdown the same shall be

rectified within 12 hours failing which no payment shall be made for

the entire breakdown period and penalty shall be applicable as per

147 SCC, and if the breakdown exceeds 12 hours, an equivalent or higher

capacity standby machine shall be deployed immediately at no extra

cost, failing which penalty shall be imposed on the contractor.

NDSR-104 The contractor shall ensure mobilization/shifting of the Man-lift within Week ₹

the contract Scope area within a maximum time limit of 2 hours per

km or part thereof as per EIC instructions with no extra payment for

transportation, and any delay shall attract proportionate penalty as

per SCC; the rate shall be deemed to include deployment of traffic

marshal(s) and provision of all necessary safety arrangements

including barricades, reflective jackets, baton lights, cones and warning

signage for operation near traffic areas; the contractor shall ensure

availability of the machine for all working days except one (01) weekly

off, and no payment shall be made for idle time, non-availability,

breakdown or any inefficiency; the quoted rate shall be firm, fixed and

inclusive of all taxes, duties, insurance, labour cess, statutory

Providing and Operating Diesel Truck mounted Boom Lift of 15-20

metre reach complete in all respects including deployment of skilled

operator (driver), helper, fuel (diesel), lubricants, insurance and all

maintenance (routine, preventive and breakdown), repairs, insurance,

statutory approvals, permits and all operational costs as directed by

the Engineer-in-Charge (EIC);

The equipment shall be kept in safe, efficient and fully functional

condition at all times, and in case of breakdown the same shall be

rectified within 12 hours failing which no payment shall be made for

the entire breakdown period and penalty shall be applicable as per

SCC, and if the breakdown exceeds 12 hours, an equivalent or higher

capacity standby machine shall be deployed immediately at no extra

cost, failing which penalty shall be imposed on the contractor.

148 NDSR-105 The contractor shall ensure mobilization/shifting of the Man-lift within Week ₹

the contract Scope area within a maximum time limit of 2 hours per

km or part thereof as per EIC instructions with no extra payment for

transportation, and any delay shall attract proportionate penalty as

per SCC; the rate shall be deemed to include deployment of traffic

marshal(s) and provision of all necessary safety arrangements

including barricades, reflective jackets, baton lights, cones and warning

signage for operation near traffic areas; the contractor shall ensure

availability of the machine for all working days except one (01) weekly

off, and no payment shall be made for idle time, non-availability,

breakdown or any inefficiency; the quoted rate shall be firm, fixed and

inclusive of all taxes, duties, insurance, labour cess, statutory

GMRC Page 19 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing services for shifting/transportation of Man Lift (Telescopic

Sky Lift / Hydra Machine) from one work location/section to another,

including movement outside the assigned section, as and when

required, strictly as per the instructions of the Engineer-in-Charge.

The transportation shall be carried out using suitable Truck/Trailer,

including loading, unloading, securing, transit handling, fuel, tolls,

driver charges, and all other incidental expenses, complete in all

149 NDSR-105A respects. Each ₹

The rate shall be applicable for transportation distance up to

(Seventy) kilometers (lead).

The contractor shall ensure timely mobilization and safe delivery of

the equipment without any damage

KSB Three Phase Submersible Pump Set 9.3 kiloWatt Discharge

150 NDSR-106 Each ₹

Capacity 72000, IS:8034:2018 Compliant

Supply of 10KV generator set including the cost of diesel and generator

151 NDSR-107 Each Day ₹

including cost of operator.

Sr No Sub-Schedule - B.11 (Signage/Other Misc) Unit Rate

Reparing Signages :Repair damaged sign without replacing it Preparing

surface by removing all existing letters, symbols, base paint,

lamination if any etc. including required scaffolding etc. Providing and

152 NDSR-108 fixing digital print vinyl (3630 series of 3M or equivalent) to existing

sign board required colour with printing as per signage schedule,

153 NDSR-108.1 300mm X 300mm Nos ₹

154 NDSR-108.2 600mm X 400mm Nos ₹

155 NDSR-108.3 1200mm X 400mm Nos ₹

156 NDSR-108.4 1500mm X 400mm Nos ₹

157 NDSR-108.5 1800mm X 400mm Nos ₹

Manufacturing, supplying and fixing retro reflective signage boards of

3mm ACP with high intensity encapsulated lens retro reflective vinyl

158 NDSR-109 Sqm ₹

Type-III, including all materials, fixing, rounding corners, complete as

per specification.

Steel work in tubular sections with 50 micron pure polyester powder

159 NDSR-110 coating for signage frames, posts, suspenders; cutting, hoisting, Kg ₹

welding/bolting complete as per drawing.

Driver of 60W/100W/220W, IP65, lens option, 1W with 5-year

warranty (Osram/Vin/Samsung).

161 NDSR-111.1 60 watt Nos ₹

162 NDSR-111.2 100 watt Nos ₹

163 NDSR-111.3 200 watt Nos ₹

Site layout/main sign board (3mm ACP with retro reflective vinyl), SS

post 50mm dia, 1.6mm thick, height 1.6m.

165 NDSR-112.1 Size 1500mm X 1200mm Nos ₹

Supplying & installation of ACM material for photo-luminescent fire

167 NDSR-113.1 Size 275mm X 150mm Nos ₹

Directory board – frame of SS pipe 50mm X 50mm X 1.6mm with ACP

169 NDSR-114.1 Size 1500mm X 1350mm Nos ₹

170 NDSR-114.2 Size 750mm X 1350mm Nos ₹

171 NDSR-114.3 Size 600mm X 900mm Nos ₹

GMRC Page 20 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Supply & installation of laminated printed vinyl sheet (3M/LG

172 NDSR-115 sqft ₹

equivalent) on glass.

173 NDSR-116 Supply & installation of flex single side print as per design. sqft ₹

Supply & installation of flex board single-side digital print with

174 NDSR-117 sqft ₹

aluminium stand.

Providing and pasting vinyl digital print signages at all locations

175 NDSR-118 including all T&P, labour etc for cleaning the surface, pasting signages

all complete as per direction of EIC.

176 NDSR-118.1 a) On 3mm Sunboard Base Sqm ₹

177 NDSR-118.2 b) On 3mmAcrylic Base Sqm ₹

178 NDSR-118.3 c) On 3mm ACP base Sqm ₹

Providing, supplying and fixing High Intensity Retro reflective sheet of

approved make on 3mm ACP Sheet. (Cost of ACP Sheet shall be paid

179 NDSR-119 extra) as per direction and satisfaction of Engineer-in-Charge. Sqm ₹

Printing Matter for Signage

Providing and fixing acrylic hanging plate with printing on both sides of

180 NDSR-120 size 1 ft x 0.5 ft all complete in all respect as per direction and Each ₹

satisfaction of Engineer-in-Charge.

Providing and fixing 6mm thick SS Plate matt finish with 4no. of holes

of dia 8mm/10mm and four edge mirror grinding and duly chamfered,

181 NDSR-121 finishing with floor, including drilling holes in floor and fixing with Kg ₹

screws, all complete as per direction and satisfaction of Engineer-in-

Additional wiring for illuminated signage: Supply and wiring for

lighting/Receptacle in the existing conduit for lighting circuits/single

phase sockets from DB to the switch box with P + N _+E copper FRLSZH

1.1 KV grade cable to connect all signage’s, LEDs, Lights, switches

sockets etc. All wires shall be terminated with Pin tyle lugs and

provided with ferrules for identification normally circuit mains start

from DB, MCB and run up to the switch box/MCB controlled lights up

to first point.

Single circuit consisting of 3 Run 2.5 sqmm copper conductor FRL SZH

183 NDSR-122.1 RM ₹

1.1 KV Grade cable

Double circuit consisting of 6 Run 2.5 sqmm copper conductor FRLSZH

184 NDSR-122.2 RM ₹

1.1 KV Grade cable

185 NDSR-122.3 LED Rope light for Glow type signage RM ₹

186 NDSR-122.4 Adapter Nos. ₹

Providing and fixing of Anti Birds Spikes made of high quality of Poly

Carbonate, 5 Row 304mm. Rates are inclusive of screws, cable ties,

187 NDSR-123 Mtr ₹

adhesives, fasteners up to 5 meter Height complete as per direction of

Engineer-in-Charge.

Attending various day to day complaints consisting of repairs to the

doors, windows, tables, chairs, ventilation, leakage of pipe lines, fixing

the fittings using putty, nails, screws, minor paints in parts not

exceeding 0.50 sqm and rectifying the defects, cause of complaints,

with necessary T&P but without changing/replacing the

fittings/fixtures and its internal parts and it shall be treated as one

complaint only. This includes maintenance of all the buildings and

installations, involving repairs & maintenance & attending the

188 NDSR-124 complaints/faults/breakdowns and taking rectification action, within

specified time to ensure the 24 x7 operation of Metro systems and

installation/fixtures etc. [ material like screws/nails for fixing of tower

bolts/door handles etc. and washers/ thread/ sefeda etc. in bib cock

pillar cocks etc. to prevent the leakage is included in the rates.]

GMRC Page 21 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Note:- For one location attending one complete unit (such as one

189 NDSR-124.1 door, one window, one table, one ceiling unit of one room , one

Almirah etc. shall be treated as one complaint.)

190 NDSR-124.1 Cost for Each complaint Each ₹

Fabricating and supply & fixing of stainless steel (conforming to grade

191 NDSR-125 SS 304 stain finish) four seater bench without backrest as per drawing. Each ₹

192 Face (Wall mounted)

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat international

standards. With lifetime warranty under normal working conditions.

Signage depth 25mm and inner thickness 1.5 mm with profile weight

of 0.492 kg per meter. Corners used to create frame.

NDSR-126 4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with

8520 over laminate/IJ480C non pvc vinyl with 8550 non pvc over

laminate/Diamond grade type-11. Retro reflective fixed inside with the

help of double sided tape. Signage will be fixed by passing screws from

star corner which will be fixed by drilling into the wall.

194 NDSR-126.1 Non-Lit Sqm ₹

195 NDSR-126.2 Lit/Illuminated (Less than 0.5 sqm face area) Sqm ₹

196 NDSR-126.3 Lit/Illuminated (Equal to or More than 0.5 sqm face area) Sqm ₹

Modular signage using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat international

standards. With lifetime warranty under normal working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter. Corners

used to create frame. 4mm FR grade ACP AL45 used on both sides with

3M IJ 180C vinyl with 8520 over laminate/IJ480C non pvc vinyl with

198 8550 non pvc over laminate/Diamond grade type-11 Retro

reflective.For a IDDS display box of approx. size 950 x 450 mm: A MS (

mild steel) RHS 50 x 25 x 3 mm horizontal member welded on a 10 mm

thick mounting plate supported by triangular gusset plate of 8 mm

thick. This structural mounting is stable enough for IDDS. A cover plate

of full or half size covers the mounting and gusset plate.

199 NDSR-127.1 Non-Lit (Two sided) Sqm ₹

200 Suspended (At Concourse Level)

GMRC Page 22 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat international

standards. With lifetime warranty under normal working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter. Corners

used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with

201 8520 over laminate/IJ480C non pvc vinyl with 8550 non pvc over

NDSR-128 laminate/Diamond grade type-11. Retro reflective.

The height of the pipe can be as per different locations on site, height

can be maximum up to 1.8 meter.

At Concourse Level - with two nos. SS sections for suspension. SS316

CHS (Circular Hollow Section) of dia 38mm/1.5" to be used to suspend

a Display box of approx. 1220 x 450 mm.

202 NDSR-128.1 Non-Lit (Two sided) Sqm ₹

203 NDSR-128.2 Lit (Two sided) Sqm ₹

204 Suspended (At Platform Level)

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat international

standards. With lifetime warranty under normal working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter. Corners

used to create frame. 4mm FR grade ACP AL45 used on both sides with

NDSR-129 3M IJ 180C vinyl with 8520 over laminate/IJ480C non pvc vinyl with

8550 non pvc over laminate/Diamond grade type-11. Retro reflective.

The height of the pipe can be as per different locations on site, height

can be maximum upto 1.8m. At Platform Level - with MS sections for

suspension. 40x40x3mm MS Pipe box sections to be used to suspend a

Signage box of approx. 1220 x 450 mm.

206 NDSR-129.1 Non-Lit (Two sided) Sqm ₹

207 NDSR-129.2 Lit (Two sided) Sqm ₹

208 Post (Non-lit)

GMRC Page 23 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

(Thickness 20-75 microns). ISO-9001-2008 product with premium

grade anodizing as per qualanod and qualicoat international standards.

With lifetime warranty under normal working conditions. The weight

per meter is 2.148 kgs and profile thickness is 3.2mm.

I sign display frame: modular signages using aluminum extrusions

(Alloy 6060) with anodizing (thickness 20-75 micron).ISO-9001-2008

product with premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal working

Signage depth 50mm. profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter. Corners

NDSR-130 used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with

8520 over laminate/IJ480C non PVC vinyl with 8550 non pvc over

laminate/Diamond grade type-11- Retro reflective fixed inside with the

help of double sided tape.

For mounting the poles MS section fixed inside the octagonal post, top

covered with plastic caps and bottom base plate made out of 10mm

thick MS plate with round edges.

At Ground Level

For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk SHS,

210 NDSR-130.1 fixing with 16mm dia 600mm long J-bolts in Concrete foundations. Sqm ₹

At Platform Level

For mounting the poles MS Hollow Section 80 x 80 x 3.2mm Thk SHS,

211 NDSR-130.2 fixing with 16mm dia 250mm long Threaded Rods/bolts. Sqm ₹

Provding and fixing Modular Totems using aluminum extrusions (Alloy

6060) with anodizing (Thickness 20-75 microns). ISO-9001-2008

product with premium grade anodizing as per qualanod and Qualicoat

international standards. With lifetime warranty under normal working

conditions. Sections can be used to create totems up to 6m with

variable depths as per requirement. Basic profile with thickness 2mm

and 1.525 kg/meter. Round cover profile of thickness 2mm and

213 1.136 kg/meter. Ease of graphic change and maintenance. Sqm ₹

The cost shall include complete foundation works including earthwork,

excavations, centering, shuttering, steel/RCC materials, bolts etc.

Totem size shall be 1000mm breadth x 4000mm height excluding

foundations and base.

214 Channel Letters

Main station identity name shall be illuminated, exterior LED channel

letters, reverse letter made with 3 mm aluminum.

100 mm sides of signage by bendable Aluminum alloy. Both back &

side assemble with by argon welding. Top signage sheet fabricated of

5mm thick, Opal cast A grade PMA sheet 3/4" ring made of 5mm plexi.

NDSR-132 IP-65 high power chips LED modules (CE certified) 12V DC-1-1.4 watt

beam angle 140/160.

Input Voltage 220V AC-input frequency 47Hz Max. Output power

300/200/100W. The sign and the logo shall hallow lit effect by LED's.

GMRC Page 24 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

216 NDSR-132.1 Lit Channel Letters 600mm height Nos ₹

217 NDSR-132.2 Lit GMRCL Logo 1000 x 1000mm Nos ₹

218 Additional Structural steel required for ceiling Suspension

All structural steel shall be of tested quality and shall conform to one

of the following standards

219 IS:226 Structural steel (Standard Quality) Kgs ₹

IS:2062 Structural steel (Fusion welding quality) Grade A (1992) IS:961

High Tensile Structural Steel (Ordinary)

220 Offices / Door signages

Providing and fixing plate signs made in 2mm Aluminum Brush finish

Sheet neatly trimmed and corners rounded and dressed with holes

punched/drilled as per size given in drawing. Graphics to be Plotter cut

over self-adhesive vinyl as per artwork and complete plate covered

with a protective over laminate as specified and duly approved by

NDSR-134 Engineer-in-charge. Cost to include fixing of sign at location on to

221 plastered surface/concrete/Granite cladding etc. including all marking, Sqm ₹

alignment, drilling, and plugs. 4nos. mirror head bolt per signage.

Mirror bolt head stainless steel screws complete as specified in

drawings and at locations approved by the Engineer-in charge.

Providing and fixing graphics printed on Opaque Vinyl directly pasted

on the glass surfaces. Printed over Opaque self-adhesive vinyl as per

artwork and completed and laminated with protective over laminate

as specified and duly approved by Engineer-in charge. Cost to include

fixing of sign at location on to glass surface including its cleaning,

marking, alignment, complete as specified in drawings and at locations

approved by the Engineer-in-charge.Signs including all operations from

printing, fixing graphics with protective laminate, and installation all

complete as per relevant drawings and technical specifications.

223 Providing and fixing non-illuminated Photo-luminescent Safety Way Sqm ₹

Guidance System (SWGS) Signages on rigid sheet with Strong Self

Adhesive and protective laminates, Life: 10 Years and Weather Proof.

The sign should be easily cleanable with a dry cloth or with a cloth

humidified with water, Self-Extinguishing, and should not contain any

radioactive substances in toxic terms.

Photoluminescent

(Glow) Signages

GMRC Page 25 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Signs including all operations from printing, fixing graphics with

protective laminate, and installation all complete as per relevant

drawings and technical specifications.

Providing and fixing non-illuminated Photo-luminescent Safety Way

Guidance System (SWGS) Signages on rigid sheet with Strong Self

Adhesive and protective laminates, Life: 10 Years and Weather Proof.

The sign should be easily cleanable with a dry cloth or with a cloth

humidified with water, Self-Extinguishing, and should not contain any

radioactive substances in toxic terms.

225 NDSR-136 The product should be safe , Non Peelable, Non Scratchable, Non

Breakable, Silk Screen Printed: high quality paint with UV resistance, As

Per PSPA Class - A / DIN 67510 Part 2 / 60 Minutes / > 700 mcdl with

High photo-luminescent luminous intensity Certified By Government

Of India Lab For A Glow Period > 24 Hrs. DRDO & ARAI Certified for All

require QC test to Confirm As per the IS 9457-2005 ,IS 12349 (To be

approved by EIC) the color Should be RED/ GREEN/ BLUE/ YELLOW

with Graphics Symbol in White as approved by GMRCL/ Engineer-in-

226 NDSR-136.1 Exit direction and Emergency Exit signages - 150 x 400mm Nos ₹

227 NDSR-136.2 Escape arrow Path Marking Tape sign - 80mm thk RM ₹

228 Additional Conduiting for Illuminated Signages

Providing conduit embedment or surface laying on the roof slab / wall/

structures including supply of heavy duty GI conduit pipe with

minimum 20 micron thick galvanizing along with all required G.I

conduit accessories like bends elbows, junction boxes square boxes

NDSR-137 etc. With specification as covered under special specifications of

229 electrical works .The conduit shall be installed and GI fish wire shall be

provided a pulling wire. The conduit shall be provided as pulling wire,

surface laying conduit shall be used with spacer type saddle clamps

32mm Dia - GI Conduit pipe for lighting and power circuits including

230 NDSR-137.1 conduit Rm ₹

25mm Dia - GI Conduit pipe for lighting and power circuits including

231 NDSR-137.2 conduit Rm ₹

accessories and all junction as required.

232 Additional Wiring for Illuminated Signages

25mm Dia - GI Conduit pipe for lighting and power circuits including

conduit accessories and all junction as required. Supply and wiring for

lighting/receptacle in the existing conduit for Lighting Circuits / Single

phase sockets from DB to the switch control box (SB) with P+N+E-

NDSR-138 copper FRLSZH 1.1 KV grade cable to connect all signages, LEDs, lights,

233 switches, sockets etc. All wires shall be terminated with pin type lugs

and provided with ferrules for identification normally circuit mains

start from the DB, MCB and run up to the switch box/ MCB Controlled

lights up to first point.

Single circuit consisting of 3 Run 2.5 sq.mm copper conductor FRL SZH

Double circuit consisting of 6 Run 2.5 sq.mm copper conductor

235 NDSR-138.2 FRLSZH 1.1 KV Rm ₹

GMRC Page 26 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Single circuit consisting of 2 Run 4.0 sqmm and 1x2.5 sq.mm copper

236 NDSR-138.3 conductor Rm ₹

FRL SZH ,1.1KV grade cable

Double circuit consisting of 4 Run 4.0 sq.mm and 2x2.5 sq.mm copper

237 NDSR-138.4 conductor Rm ₹

FRLSZH 1.1 KV grade cable

238 Spike for birds

Providing and fixing spikes over suspended/post/projected signage for

birds made with latest technology that do not harm bird but make

signage bird proof. Spikes for birds made in 3 inch Uv stabilized

polycarbonate protecting it from the sun's rays. That will not go brittle

even in direct sunlight. It shall be also temperature resistant tested

from 20 °C to +150 °C. It shall be effective against even the heaviest

239 pigeon infestation. Bird spike shall be designed to protect broad and Rm ₹

narrow ledges. Maximum height shall be 3 Inch. Length shall be as per

signage. Color shall be transparent Cost to include fixing of spike on

signage including all marking & alignment. Locations approved by the

Engineer-in charge.

240 NDSR-140 Installation of Low Height Ticket Counter Sqm ₹

241 NDSR-141 Installation of Drop off Signage Board Sqm ₹

Sr No Sub-Schedule - B.12 (Borewell items) Unit Rate

Supplying and Installation as Specified the following ,as per direction

242 NDSR-142 of engineer-in -charge,including all taxes and duties applicable

Water type check valve 100mm dia of Odco,sant,kirloskar, leader or

243 NDSR-142.1 Each ₹

equivalent make conforming to PN-10

Pressure gauge with isolating valve of 10mm dia confirming to IS:

244 NDSR-142.2 Each ₹

of H-Guru, Dan-Fuss or equivalent make

Supply of submersible pump set with 4 HP, 3 phase, 440 volt, 50 Hz

motor 10 stage pump suitable for 80 feet water level and discharge

245 NDSR-142.3 Each ₹

1800 ltr/hr model no. CORA- 12C/') make - KSB.The rates are inclusive

of all taxes and duties complete.

Supply erection of 2.5 sqmm submersible cable make- Finolex, CCI,

246 NDSR-143 skyone.The rates are inclusive of all taxes and duties complete. Meter ₹

Lowering of pump submwersible pump into the existing bore as per

247 NDSR-144 direction of engineer-in-charge.The rates are inclusive of all taxes and Each Job ₹

duties complete.

Lifting of pump set from the existing bore as per direction of engineer-

248 NDSR-145 in-charge.The rates are inclusive of all taxes and duties complete. Each Job ₹

Providing and fixing ISI mark 4 x 2.5 sqmm. Copper conductor

armoured cable. All work shall be carried out as per direction from

249 NDSR-146 RM ₹

Engineer-in-charge.The rates are inclusive of all taxes and duties

Providing and fixing ISI mark 1' PVC conduit pipe. All work shall be

250 NDSR-147 carried out as per direction from Engineer-in-charge.The rates are RM ₹

inclusive of all taxes and duties complete.

Removal of water and existing filter materials from the structures,

Development and cleaning of bore Cleaning of material and putting

251 NDSR-148 back to the system as required and per direction of engineer-in - Each ₹

charge. The rates are inclusive of all taxes and duties, Nothing shall be

GMRC Page 27 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Miscellanecous civil works like cleaning of ground rain water drain

meshes, minor repairing of drains, meshes, manhole covers etc. The

252 NDSR-149 Each ₹

rates are inclusive of all taxes and duties complete

Cartage of equipment required for maintenance of Borewell as

253 NDSR-150 required as per direction of engineer-in-charge. The rate are inclusive Each job ₹

of all taxes and duties complete.

Sinking bore well of 150mm dia clear, using fast rig in all strata

including I Lot overburden up to 20m, fixing of casing pipes, collars and

cap with necessary cutting and threading Including transportation of

rig and supporting vehicle, crew charges and cost of consumables etc.

254 NDSR-151 Lot ₹

complete including yield test at the final depth with a minimum

working of comeressor for one hour

255 NDSR-151.1 Up to 60 m depth @Rs. 200 perm

256 NDSR-151.2 Above 60m and up to 90m@ Rs. 220 perm

257 NDSR-151.3 Above 90m to 120m @ Rs. 250 per m

Supplying 150mm n.b MS 'C' class bore well casing pipe with collars

conforming to IS Standards

Supply, delivery, Installation, testing and commissioning of vertical

multistage submersible pump of Suitable Capacity (HP) and providing

259 NDSR-152 necessary piping and valves upto ground level comprising of Set ₹

One set vertical multistage suitable submersible pump of 3 Phase

V, 50 Hz AC, pump capable of pumping 600LPM against an

approximate total head of 110m from all causes, Including providing

4C x 4 Sqmm 440 V flat core double sheathed water proof submersible

cable, Star Delta starter, control panel with dry run preventer,

overload protection and backup protection and capacitor as required,

installed Inside a weather proof kiosk with locking arrangement of

approved design near the bore well, including making necessary

electrical connections from mains to the starter panel and from starter

panel to pump. Submersible pumps may be of Atlanta/ KS8 / Klrloskar

Note: The 4C x 4 Sqmm 440 V flat core double sheathed water proof

submersible cable shall be in scope of contractor as e_er site condition.

Providing & fixing gun metal gate valve & non return valve of 50mm

nominal bore on delivel\l_ side

Supply & Fixing 50mm n.b GI Pipe conforming to IS Specifications from

bore well pump up to ground level.

lowering the pump & pipe assembly using tripod & chain pulley block

in a neat workmanship manner with all necessary accessories for

263 NDSR-152.4 supporting the pump, providing & fixing necessary bore well clamps on

the delivery pipe to securely position & retain the pump & pipe in

position etc., come_lete

Supply, delivery, installation, testing and commissioning of vertical

multistage submerslble pump of suitable HP or nearest standard

manufacturing size and providing necessary piping and valves up to

264 NDSR-153 Set ₹

ground level suitable for 601pm at 25 mtr head complete with 4m

delivery pipe, submersible electrical cable, DOt. starter, Level switch

GMRC Page 28 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Providing, erecting approved make horizontal mono submersible

pump set I having flow rate of 60 LPM and 25 m head with suitable

motor working on 3 Phase, 50 Hz, 415 volt+-10% with dual starter,

265 NDSR-154 Set ₹

cables of required size, GI medium delivery pipes, specials, suction

strainers etc. complete including manlfoldL control and measuring

Sr No Sub-Schedule - B.13 (Paver Block Work) Unit Rate

Providing and laying factory made chamfered edge Cement Concrete

paver blocks in footpath, parks, lawns, drive ways or light traffic

parking etc, of required strength, thickness & size/ shape, made by

table vibratory method using PU mould, laid in required colour &

pattern over 50mm thick compacted bed of sand, compacting and

proper embedding/laying of inter locking paver blocks into the sand

bedding layer through vibratory compaction by using plate vibrator,

266 NDSR-155 filling the joints with sand and cutting of paver blocks as per required Sqm ₹

size and pattern, finishing and sweeping extra sand. complete all as per

direction of Engineer-in- Charge.

60mm thick cement concrete paver block of M-35 grade with

approved colour, design & pattern.

Taking out existing CC interlocking paver blocks from footpath/ central

verge, including

removal of rubbish etc., disposal of unserviceable material to the

267 NDSR-156 dumping ground, for which Sqm ₹

payment shall be made separately and stacking of serviceable material

within 50 metre lead

as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/

shape laid in required

line, level, curvature, colour and pattern over and including 50 mm

thick compacted bed of

268 NDSR-157 Sqm ₹

coarse sand, filling the joints with fine sand etc. all complete as per the

direction of Engineerin-

charge. (Old CC paver blocks shall be supplied by the department free

Sr No Sub-Schedule - B.14 (Paint Work) Unit Rate

Finishing with Deluxe Multi surface paint system for interiors and

exteriors using Primer as per manufacturers specifications :

269 NDSR-158 Sqm ₹

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and

including one coat of Special primer applied @ 0.75 ltr /10 sqm

Finishing walls with Acrylic Smooth exterior paint of required shade :

270 NDSR-159 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing Sqm ₹

cement paint surface

Painting with synthetic enamel paint of approved brand and

271 NDSR-160 manufacture of required colour to give an even shade : Sqm ₹

One or more coats on old work

Removing white or colour wash by scrapping and sand papering and

272 NDSR-161 preparing the surface smooth including necessary repairs to scratches Sqm ₹

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound ) content.

273 NDSR-162 With water thinnable cement primer on wall surface having VOC Sqm ₹

content less than 50 grams/litre

GMRC Page 29 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

Annexure – 2, DETAILS OF TAXES AND DUTIES (Tax Bifurcation) INR: Indian Rupees

GST (Goods and Services Tax)

Customs Duty Total

CGST SGST IGST Any other Tax Amount of

t on t on Amount Amount

Amou Amount on Amoun Amoun

which Rate which Rate Amount Rate on which Rate Amount on which Rate (6) = sum

nt which tax/ t t

tax/ (%) tax/ (%) (INR) (%) tax/ duty (%) (INR) tax/ duty (%) of (1) to

(INR) duty levied (INR) (INR)

duty duty levied levied (5)

al Note :1 Contractor at any point of time shall be bound to share the details pertaining to the Input Tax Credit availed or to be availed along with the supporting documents.

Note:2 In the Tax Schedule Contractor shall require to furnish component wise tax details.

Note:4 GST TDS will be deducted from the invoice considering the prevailing rates

Note 5 : It shall be sole responsibility of Contractor to pass all the accrue or to be accrued Input tax credit to GMRC as per Section 171 of CGST Act.

GMRC Page 30 of

Tender No: GMRC/CIVIL MAINTENANCE/NS-4/PH-1/2026

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer C15 & C26 of ITT)

1The following are the particulars of minor deviations from the requirements of the Tender Document:

Sr. No Clause Deviations Price adjustment for each

1 The Tenderer shall indicate price adjustment against each deviation in Annexure 13A of BOQ. This price is the price

which the tenderer shall reduced from this tender price if deviation(s) is/are accepted by the Employer.

2 Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No

Deviations’.In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the

tenderer has not proposed any deviations from tender documents.

3 If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender,

other than in this Annexure, it will have no effect.

Signature of authorized signatory on behalf of tenderers

GMRC Page 31 of