ADEN (Works) BVP Jurisdiction : Accessibility provisions for Divyangjans at various stations against the sanctioned work Bhavnagar Division: Accessibility provisions for Divyangjans at stations.

Item Breakup - 1-DSR-2021

0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 10.0 STEEL WORK 10.2 Structural steel work riveted, bolted or welded Kg 600 111.95 67170 in built up sections, trusses and framed work, 29 including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 11.0 FLOORING 11.16S TILE FLOORING Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed 11.19 with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 30 11.19.3 Dark shade pigment using ordinary cement Sqm 823.1 1240.75 1021261.33 31 11.19.4 Ordinary cement without any pigment Sqm 368.06 1185.3 436261.52 11.41S VITRIFIED FLOOR TILES BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid 11.41 on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 32 11.41.2 Size of Tile 600x600 mm Sqm 17.25 1416.65 24437.21 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 33 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 98.81 294.85 29134.13 34 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 96.12 282 27105.84 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 Sqm 53.48 166.85 8923.14 35 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 50.3 158.95 7995.19 36 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.2 Painting wood work with Deluxe Multi Surface Sqm 1.62 144.9 234.74 Paint of required shade. Two or more coat 37 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture 13.80 Providing and applying white cement based Sqm 43.74 123.85 5417.2 putty of average thickness 1 mm, of approved 38 brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 15.0 DISMANTLING AND DEMOLISHING Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 39 15.7.4 In cement mortar cum 5 1698.45 8492.25 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 40 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 800 60.5 48400 15.25 Dismantling stone slab flooring laid in cement Sqm 1932.42 219.75 424649.3 mortar including stacking of serviceable 41 material and disposal of unserviceable material within 50 metres lead. 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. 42 16.3.10 Moorum cum 80.57 888.3 71570.33 16.49S MISCELLANEOUS BHAVNAGAR DIVISION-ENGG/WESTERN RLY Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D- 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium 16.60 alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 43 16.60.1 Overhead informatory road signage Sqm 100 5609.55 560955 16.62 Providing and applying 2.5 mm thick road Sqm 24 623.8 14971.2 marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater 44 and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 16.90 Providing and laying tactile tile (for vision Sqm 308.88 1719 530964.72 impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, 45 multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 17.0 SANITARY INSTALLATIONS Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 46 17.28.2.2 40 mm dia Each 60 104.35 6261 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making 18.10 good the walls etc.-Internal work - Exposed on wall BHAVNAGAR DIVISION-ENGG/WESTERN RLY 47 18.10.3 25 mm dia nominal bore Metre 120 491.2 58944 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 48 18.13.1 25 to 40 mm nominal bore Each 6 757.1 4542.6 49 18.13.2 50 to 80 mm nominal bore Each 6 1513.7 9082.2 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 50 18.49.1 15 mm nominal bore Each 24 434.2 10420.8 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- 18.90 profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. -Elbow 90 degrees 51 18.90.2 For 22.22 mm outer dia pipe Each 24 93.65 2247.6 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V- 18.92 profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.-Equal Tee 52 18.92.2 For 22.22 mm outer dia pipe Each 24 334.5 8028 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.17 Providing and fixing anodised aluminium grill Kg 5.4 560.85 3028.59 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 53 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.69 grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level BHAVNAGAR DIVISION-ENGG/WESTERN RLY 54 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 18.14 8086.6 146690.92 Total 5612945.33