Repairing of damaged wiring of Officer's quarters, staff quarters, service buildings and repairing of Sub-stations, panel & overhead power line over BSP settlement.

1-Repairing of damaged wiring of Officer's quarters, staff quarters, Above/

Electrical point wiring for the 6 Amps light, fan & 5 Amps socket by 1.5 sq mm copper wire and with modular board and casing capping with supply of all materials.

Casing-caping Wiring for 6-16 Amps plug points with PVC casing caping and PVC insulated copper conductor 2.5 sq. mm. size with with modular board and casing capping with supply of all materials.

Re-dressing of surface wiring where ever in opened condition.

Concealed wiring for light fan & 6 Amps plug points with PVC Pipe and PVC insulated copper conductor 1.5 sq. mm. size with modula rboard with supply of all materials.

Concealed Wiring for 6/16 Amps plug points with PVC Pipe and PVC insulated copper conductor 2.5 sq.mm. size with modular board supply of all materials.

Concealed/casing caping Wiring for Sub-circuits.

Supply of SPN Distribution board conforms to IS-13032. DBs are phosphatised and painted with epoxy polyster based powder paint, sheet steel enclosure for flush/surface mounting withneutral link,earth terminal & bus-bar single door 6 way.

Supply of MCB SP 6-32 A capacity.

Fixing , connection & commissioning of DB supplied above.

Erection, painting & commissioning of Two pole structure complete for 11 KV including AB switch, LA, dropout fuse of 2 set each with allied accessories including supply of all material.

Supply & Fabrication of steel structure for different work with painting and welding works.

Supply of Aluminium Conductor Galvanized Steel Wire reinforced size 80 SQ.MM (6/4.09 MMALUM + 1/4.09 MM STEEL)"

Drawl of conductor on rail poles with 3 wire 6/1/4.09 size ACSR conductor after releasing existing conductor.

Supply of Aluminium conductor galvanized steel wire 50 sqmm reinforced size 6/3.35 MM ALUMN +1/3.35 MM STEEL.

Drawl of 5 conductor LT line

"Erection & painting of departmentally supplied rail poles (13-8 Mtrs long)."

Construction of Cement Concrete foundation containing cement concrete on the proportion 1:3:6 of cement, sand & ballast size of 40mm.

Erection of Stays & Guys.

Cutting of Rail poles

Hiring of crane for transportation of Rail pole ot other heavy material from one location to other location/site.

Supply of guarding for conductor made of GI 8 SWG wire with all accessories as details.

fixing of guarding for conductor made of GI 8 SWG wire with all accessories as details.

Supply of 11 KV- V cross arm including back clamp, nut -bolt and washers.

Supply of 11 KV top clamp.

Fixing of 11 KV- V cross arm including back clamp, nut - bolt and washers.

Fixing of 11 KV top clamp

Supply of 11 KV disc insulator with supply of requirednut & bolts.

Fixing of HT disc insulator with hardware.

Supply of 11/33 KV pin insulator with supply of required nut & bolts.

Fixing of HT pin insulator suitable for 11/33 kv.

Supply of Anti climbing Device

Fixing of Anti climbing Device

Laying of earth cone

Supply and fixing of vertical guarding with reel insulator

Supply of G.I . wire 8 SWG size.

Drawing of guard wire after fabrication using GI wire & after release of existing guard wire

Laying of cable in open air/fixed in wall with supply of all material (Except cable & GI Pipe).

Laying of cable of in GI pipe including supply of all materials (Except G.I. Pipe & Cable)

Supply of DP MCB 32 A flush mounting MCB complete with sheet steel enclosure powder painted.

Fixing of DB supplied above

Supply of Digital Timer

Supply of Contactor Block 40 Amps. Capacity with Auxiliary contact.

Painting of rail pole with supply of aluminum paint.

Painting of rail pole with supply of Red oxide (primer).

Supply & fixing of C.I. clamp for top earth wire with all accessories like MS flat iron 50X8" size, nut - bolt, washer, reel insulator etc.

Drawing of earth wire.

Supply of LT 5 pin vertical bracket for single circuit including back clamp, nut-bolt and washer.

Fixing of LT 5 pin vertical bracket including back clamp, nut-bolt and washers.

Supply of LT insulators SHACKLE type 90 x 75 mm.

Fixing of SHACKLE type insulator after release of old insulator.

Supply of class A MS pipe clamp for clamping the street light fitting complete.

Supply of Danger Boards HT/LT.

Laying of Cable Specially Across the road/track by using trench-less construction method (through HDPE Pipe casing of PE 80 grade, 160 mm OD,0.6 MPa working pressure, 9 mm thick or as per site requirement).

Laying of cable of above 4x35 sq.mm in PVC/Polythene pipe without digging of earth, dressing of land including all materials.

Trenching/Digging of earth 1 mtr deep for cable laying

Trimming of big branches above15 cm with disposal.

Trimming of small branches dia.Above 5 CM &less than 15 cm with disposal.

Supply of ballast 40 mm size.

Supply of murrum.

Proper leveling & Dressing of land and there after spreading of ballast in the Sub- station yard.

Laying & spreading of Mooram including ramming rolling, water & consolidation with all contractor'slabour, tools & plants complete.

Supply of Hand gloves suitable for operating voltage 11 KV.

Supply of Hand gloves suitable for operating voltage 33 KV.

Straightining of loose LT/HT overhead Aluminium conductor wire.

Straightining of inclined/bend pole with the help of turpher.

Supply & fixing of 18W LED down light with surface mounted (RecessType) size: 1x1, diffuser material:polycarbonate, IP20 temp.:6000K, rated voltage: 230 V AC50 Hz confirming with relevant IS specifications.

Supply & fixing of LED Recessed Luminaire Round shaped (downlight) wattage: 18W to 24W, colour:6000K/6500K

Supply & fixing of LED Recessed Luminaire (Panel Light) wattage: 30W to 48W, size:2ftx2ft (approx), colour:6000K/6500K