SPECIAL REPAIRS TO BLDG NO. P-06 MAIN POWER AT KATARIBAGH, NAVAL BASE KOCHI UNDER AGE E/M NO-II

Amount

Demolition of brick work or stone boulder, precast PCC block masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and as directed.

Material and labour for precast PCC 1:3:6 Type B1 using 20 mm graded aggregate solid block masonry exceeding 10 Cm width, built in cement mortar 1:6 all as specified and as directed.

Taking down cement plaster on brick or stone masonry surfaces etc including racking out joints hacking for keys, scrubbing down wth water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:6, on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for 5 mm thick rendering on concrete ceiling surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for applying 3 coats of white wash to newly plaster surfaces including preparation of ceiling surfaces complete all as specified and as directed.

Material and labour for preparation of old surfaces of ceiling and applying two coats of white wash on old plastered ceiling surfaces complete all as specified and as directed.

Material and labour for preparing newly plastered wall surfaces and applying two coats of Apex ultima/antifungal paint over a coat of exterior primer through authorised company applicator using modern tools and spray technique over a coat of external wall care putty not exceeding 2mm thick complete all as specified and as directed.

Material and labour for preparing newly plastered wall surfaces and applying two coats of acrylic washable distember paint over a coat of primer through authorised company applicator using modern tools and spray technique complete all as specified and as directed.

Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of acrylic washable distember paint over a coat of primer through authorised company applicator using modern tools and spray technique complete all as specified and as directed.

Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of Apex ultima/antifungal paint over a coat of exterior primer through authorised company applicator using modern tools and spray technique over a coat of external wall care putty not exceeding 2mm thick complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on old steel surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and as directed.

Taking down chowkats or frames with shutters not exc 1.5 Sqm each without taking off shutter from the frame & removed to store complete all as specified and as directed.

Taking down chowkats or frames with shutters exc 1.5 Sqm and n. exc 4 Sqm each without taking off shutter from the frame & removed to store complete all as specified and as directed.

Supply and fix powder coated Aluminium frame for windows, doors & ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed

Supply and fix powder coated aluminium door shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed.

Supply and fix powder coated aluminium window and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed. Note: Glass panel and wire mesh shall be measured and paid separately.

Supply & Fix powder coated deco grill of make DG-104 of size (10 x 5.2mm) along with its frame complete all as specified and as directed.

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames wrought framed rebated in the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and as directed.

Material and labour for 40mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and preparation to receive glass gauze etc (with out sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I section and clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix fibre glass reinforced plastic (FRP) door frames of cross section 90mm x 45mm having single rebate 32mm x 15mm to receive shutter of 30mm thickness, 2mm thick lamination filled with suitable wooden block in all three legs, moulded with fire resistant grade unsaturated polyester resin and chopped mat, frame shall be covered with fibre glass from all sides provided with MS stay provided at the bottom to steady the frame complete all as specified by the manufacturer and as directed by Engr-in-charge.

Supply and fixing to existing door frames 30 mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as directed by Engineer- in-charge

Supply and fixing 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

Supply and fixing 100mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed

Supply and fixing 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fix 100mm butt hinges mild steel cold rolled medium weight and fixed complete all as specified and as directed.

Supply and fix 75mm butt hinges mild steel cold rolled medium weight and fixed complete all as specified and as directed.

Supply and fix 150mm aluminium anodised bow handle of extruded section complete all as specified and as directed.

Supply and fix 100mm aluminium anodised bow handle of extruded section complete all as specified and as directed.

Supply and fix glass panels of sheet glass 4 mm thick ordinary quality and glazing with oil putty not exceeding 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness above or below ground level complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/pavement complete all as specified and as directed.

Material and labour 75mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base, sub floors, floors and pavings etc all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing materials and rubbish off the premises complete all as specified and as directed.

Material and labour for joint free non-skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for calibrated prepolished kota stone slab 20-25mm thick as in flooring including 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. Note: Final cutting shall be done at site and surface finished with bee-wax polish.

Material and labour for joint free non-skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 450mm x350mm x 7mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface complete including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fix PVC (SWR) 75 mm dia of outlet, floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including dismantling of old trap complete all as specified and directed.

Supply and fix in repairs vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

Supply & fix in repairs vitreous china premium Ist quality EWC white (closed pattern) including flush pipe and all accessories like rag bolts/gel gasket etc, excluding flushing cistern complete all as specified and as directed

Supply & fix in repairs to 10 litres, PVC, valve less syphonic action type, flushing cistern, low level, with inlet, ball valve, float, handle, and inclusive of brackets and connections to pipes complete all specified and as directed

Supply and fix in repairs bib taps, cast copper alloy, fancy type, chromium plated of size 15mm crutch or butterfly handle, screwed down, screwed for GI/CPVC and fixed complete all as specified and as directed.

Supply and fix in repairs 15mm size, concealed stop cock, regular body, quarter turn with flange, chromium plated, fancy type complete all as specified and as directed.

Supply and fix in repairs 15mm dia pillar tap, chromium plated, fancy type complete all as specified and as directed.

Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia D type, 60cm long, fixed with wood gutty and steel screws complete all as specified and as directed.

Supply and fix 15 mm size PVC connection with PTMT nuts of length 450 mm complete all as specified and as directed

Supply and fix in repairs chromium plated shower rose, fancy type 125mm with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repairs Ball brass valves 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs gun metal globe/gate valve 20mm dia with iron wheel head, screwed both ends on CPVC pipes, ISI marked complete all as specified and as directed.

Supply and fix 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings confirming IS-15778 in trenches including taking down unserviceable GI pipes 15mm dia complete all as specified and as directed.

Supply and fix 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings confirming IS-15778 in trenches including taking down unserviceable GI pipes 20mm dia complete all as specified and as directed.

Supply and fix 500 Ltrs rotational moulded polythylene water storage tank, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I, ISI marked including dismantling unserviceable tank complete all as specified and as directed.

Material & labour for applying oil based bitumen primer @ 0.20 Kg/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with one woven polyester mat weighing not less 160g/Sqm having softening point not less than 140˚C longitudinal tensile strength not less than 650 N/mm, tearing strength of 180 N/torque application including minimum 10 cm side over lap & 15 cm end overlap, applying a coat of blown grade hot bitumen 90/15 over membrane @ 1.2 Kg/Sqm finished with solar reflective/bituminous aluminium paint @ 100gm/Sqm including taking down and renoving existing treatment complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., fair finished surfaces of concrete all as specified and as directed.

Material and labour for TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending, spirally hooping for columns hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and labour for TMT bars, 5 mm to 10 mm dia cut to length bent to shape required including cranking, bending, spirally hooping for columns hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and labour for RCC nominal mix 1:2:4, type B1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Surface dressing not exc 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for Hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface etc complete all as specified and as directed.

Material and labour 100mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish, reflective type, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade including 50mm thick bedding with 6 to 10mm graded coarse aggregate complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey sement and pigment and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified

Material and labour for Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in coping including necessary form work all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipes)set in cement mortar of 150mm dia complete all as specified and directed.

Supply and fix PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches with fittings complete all as specified and as directed.

Supply & laying hume pipe septic tank for 5 User Capacity) designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and as directed by Engr-in-Charge.

Material and labour for soakage wells of size 1.20m x 1.5m effective depth excavation in any type of soil and removal, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of 1:2:4 concrete including interception chamber and screen chamber made of brick masonry in CM 1:4, RCC cover slab in 1:2:4 nominal mix concrete, interconnecting pipes of RCC complete filled with brick bats complete all as per TD drg No. TD/A/161 Sheet No. 1/1 dt 14.06.2003 of CE(NW)Kochi and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as per specified and as directed.

Supply and fix Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing using mild steel section of Fe-410W Gde-E-250 quality A, beam, tee, angles, channels or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Supply and fix mild steel work in framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and as directed,conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) including cover fillets and removal of debris complete as directed.

Fixing only 8mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws of size 600mmx600mmx4mm in ceiling fixed with screw as per manufacturer’s instructions complete as specified. Note: Serviceable materials obtained from item no. 79 shall be reused.

Fixing only Anodised aluminium snap grid frame work for false ceiling of grid size 605mmx605mm as specified in Clause 10.38 of MES Schedule Part I complete all specified and directed.

Supply & fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mm x 36.50mm x 1.50mm, cross Tee of size 23.50mm x 23.50mm x 1.50mm and wall angle of size 36.00mm x 25.00mm x 1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 8mm thick Non asbestos fibre cement building boards fixed in ceiling, flat or sloping complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply & fix in repairs PVC Eaves gutter heavy duty half round 200mm dia including drop end with all necessary flat iron fitting complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipes 110mm dia. single socketed, in any length with rubber ring joints, fixed to walls with fittings complete all as specified and as directed.

Supply & fix in repair PVC (SWR) Bend 110 mm dia complete all as specified and as directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Fixing only roof tiles, Mangalore pattern, interlocking at side joints, laid dry including applying one coat of antifungal paint after cleaning of old tiles complete all as speciified and as directed. Note: Serviceable materials obtained from item no. 87 shall be reused.

Material and labour for roof tiles, Mangalore pattern, interlocking at side joints, laid dry and applying two coats of antifungal paint on new tiles including preperation complete all as speciified and as directed.

Fixing only ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as speciified and as directed. Note: Serviceable materials obtained from item no. 87 shall be reused.

Material & labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as speciified and as directed.

Dismantling of corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as speciified and as directed.

Supply & fix 0.63mm galvanised corrugated steel sheeting class IV, light coating zinc with two corrugation side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts and washers in roof/ wall etc.complete all as speciified and as directed.

Dismantling of Battens for tiles, shingles etc, exceeding 15cm spacing of any size including tilting fillets complete all as specified.

Fixing only for 2nd class hard wood battens, clean sawn at 25cm centres, sectional area exc. 5 & n exc. 25 Sq. cm complete all as speciified and as directed Note: Serviceable materials obtained from item no. 94 shall be reused.

Material & labour for 2nd class hard wood battens, clean sawn at 25cm centres, sectional area exc. 5 & n exc. 25 Sq. cm complete all as speciified and as directed

Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified.

Material & labour for 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exceeding 13 Sqcm & not exceeding 25 Sqcm as in rafter complete all as speciified and as directed

Fixing only 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exceeding 13 Sqcm & not exceeding 25 Sqcm as in rafter complete all as speciified and as directed Note: Serviceable materials obtained from item no. 97 shall be reused.

Supply & fix in repair steel rolling shutters gear operated type with bevel gear box and crank handle having thickness of lath 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete including taking down old shutter of any size with all fitting and fixture complete all as specified and as directed

Supply & fix in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Supply and fix in repair ball bearing for rolling shutters complete all as specified and as directed

Taking down copper/ aluminium point wiring of light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed Note: Credit for above items should be made as per conditions separately

Material & labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 Sqmm nominal cross sectional area, copper conductor sheathed FRLSH cable 1100 Volts grade including PVC conduit not less than 20mm dia surface mounted and connected accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with suitable concealed cast iron boxes with modular cover plate, PVC boxes, hylem sheet, including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire complete all as specified and as directed for the following:

One light point controlled by one switch

One ceiling/exhaust fan point controlled by one switch and regulator

One 5 pin 5/6 Amp socket outlet point controlled by one switch on the same board

One 5 pin 5/6 Amp socket outlet point controlled by one switch on the independent board

Material & labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 2.5 Sqmm nominal cross sectional area, copper conductor sheathed FRLSH cable 1100 Volts grade including PVC conduit not less than 20mm dia surface mounted and connected accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and with suitable concealed cast iron boxes with modular cover plate, PVC boxes, hylem sheet, including 2.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one 6 pin 16 Amp socket outlet point on the independent board complete all as specified and as directed.

Supply and fix in replacement ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix in replacement switch modular, 5/6 Amps, SP, 230 volts, one way complete all as specified and as directed.

Supply and fix in replacement switch socket outlet, 2 module, 6A, 2/3pin, 230 volts complete all as specified and as directed.

Supply and fix in replacement switch socket outlet, 2 module, 6/16A, 2/3pin, 230 volts complete all as specified and as directed.

Supply and fix switch modular, 15/16 Amps, SP, 230 volts, one way complete all as specified and as directed.

Supply & fix regal batten for LED tube lights, both side connection type and with ISI marked, medium grade LED tube rod 1 x 20 Watt, both side connection complete all as specified and as directed.

Supply and fix in replacement ceiling fan 1200 mm sweep 3 star rated, old UNSV ceilling fans to be deposited with MES store yard complete all as specified and as directed. Note: Old fan will be deposited in MES store yard

Supply and fix in replacement 450mm sweep, metal body exhaust fan heavy duty, single phase 230 Volts complete all as specified and as directed. Note: Old fan will be deposited in MES store yard

Supply and fix in replacement MCB distribution board in sheet metal enclosure, powder coated, factory made, IP 43 protection, double door type SPN 8 way with 200 Amps, 240 Volt rated bus bar neutral and earth connected bars using suitable required fixing arrangement complete all as specified and as directed.

Supply and fix in replacement MCB SPN 32 Amps, 240 Volts, 10 KA 'B' series with all incoming/ outgoing connections with proper size of lugs complete all as specified and as directed.

Supply and fix in replacement MCB SP 6 to 32 Amps, 240 Volts, 10 KA 'B' series with all incoming/ outgoing connections with proper size of lugs complete all as specified and as directed.

Material and labour in replacement of sub main wiring with 2 runs of 6 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed PVC conduit pipe of medium duty not less than 25 mm dia including necessary PVC conduit specials and one run of 6 Sqmm cable single core PVC insulated, unsheathed, 1100 Volts grade multistranded copper conductor FRLS cable as earth continuity conductor and connecting with suitable size thimble including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:-Two runs of 6 Sqmm size PVC copper cable, one run of 6 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below ground level connected with galvanised strip of size 25 x 4 mm upto a length of 7.5m by means of nuts, bolts, check nuts and washers including welding of each joints made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore medium grade and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe light grade, wire mesh, charcoal or coke and common salt in alternate layer of 150mm compacted thickness all round the earth electrode, concrete earth pit in PCC 1:3:6 type C-1 with 20mm graded stone aggregate, 50mm thick precast RCC 1:2:4 cover slab re-inforced with 8mm dia TMT bar @ 150mm C/C both ways and suitable handle made of 10mm dia including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 metre etc all as shown on electrical plate No.3 of MES Schedule Part-I 2009 complete including testing on completion all as specified and as directed.

Materials and labour in replacement of building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt including suitable GI bracket of 25 mm dia and fixing arrangement on walls complete all as specified and as directed.

Materials and labour in replacement of flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 120 Watt including fixing arrangement on walls complete all as specified and as directed.

Supply and fixing street light control panel, 3 phase 12 KW load with 24 hour digital timer, contactor rating 65 Amps TP, MCB rating 63 Amps, TPN including taking down old one of any type/size complete all as specified and as directed.

Supply and fixing in replacement flex glow sign board of size 2 x 1 x 0.25m with acrylic sheet at front side and GI sheet of thickness not less than 1mm at all other sides of box with aluminium/ structural steel section as frame complete including necessary lighting arrangment inside the box with 02 Nos LED tube light fittings of 1 x 20/18 watt ( T-8 lamp) at top and bottom portion of sign board and its connection terminals with 1.5 Sq mm, 2 core PVC insulated copper conductor from sign board to terminal box/ceiling rose to connect external power supply, complete assembly to be fixed to wall/ angle iron frame in E/M installation with necessary fixing arrangement, the complete assembly should have water tight seal packing connected with screws complete all as specified and as directed

Note: (i) Rough drawing /details like name of installtion /sign board etc (Hard copy) of sign/ letters/ symbols will be given by Department. The contractor has to develop the same with legends/ signs as per the standards on computer in multicolour and same get it approved from Engineer-in-Charge . (ii) Rate includes the glow sign board of required size with flex, necessary lightning arrangment including connection terninals angle iron frame for fabrication of sign board and supporting clamps. (iii) The contractor has to take prior approval from Engineer in-Charge regarding the specification of sign board like color of acrylic sheet and letters.

Supply and fixing in replacement energy saving, enviorment friendly and robust High bay LED luminaire of 150 watt with efficancy not less than 100Lu/ watt with toughened glass including all fixing arrangement complete all as specified and as directed

Amount of Credit Schedule shall be deducted to arrive the Contract Sum.

JESWIN BUILDERS (BID ID -3131272)

MS BUILDERS (BID ID -3130870)

WELTRONENGINEERINGSERVICES (BID ID -3131650)