Tender for the supply of scuba diving kits

BCD: • Need advanced BCD with Integrated Weight Pockets and Mechanical Weight Release System. • The backpack with built in carrying handle and a traction pad to reduce tank slippage. . • Should have Knife attachment points.

Regulator 1st and 2nd stage: • Need four medium-pressure ports all mounted on a rotating turret. It to be useful for optimal hose routing while eliminating sharp bends in the hose. • Must be with the narrow exhaust tee for the comfortable regulator. • Need braided flexi-hoses with lighter weight, more flexible and more durable. • Suitable for coldwater use (below 10°C / 50°F).

Octopus: • Need the Comfo-bit mouthpiece to virtually eliminate jaw-fatigue. • It should be easy to breath in any position. • It should be yellow hose of atleast 36” length. • Coldwater compatible.

Three Gauge Console: • Need High fidelity depth scale for easier reading even at shallow depths • The Strap must be designed to fit a variety of wrist sizes and wet/dry suit diameters • Maximum depth indicator • Good luminescent gauge face for easy reading at low light (2 feet / 6 meters depth).

Booties: • Minimum 5mm thickness. . • Must be the Flexible vulcanized rubber outsole. • Heavy-duty zipper.

Fins: • Fins made of best materials with engineered side ribs and blade in full pocket. • Bending zone which allow to blade to quickly reach the optimal inclination for propulsion and water channeling. • Quick release buckles and Ergonomic strap. • Anti-slip rubber pads on the foot pocket back. • Deep Color: high visible colors underwater (yellow and orange).

Wetsuit • Made of in 3mm high-quality non-petroleum-based neoprene • The stitching must be comfortable for bare skin. • With comfortable collar and chest panel. . • O-ring seals on the wrist and ankles to limit water entries.

Mask: • Need Masks with the ability to help release the pressure of the mask on long dives. • The lenses must be Clear and with Advanced glass, that should reduce glares and enhances contrast in colors. • Quick Fit Buckles with comfort and feel

Snorkel: • Need snorkel with silicone material. The valve should guarantee sealing as well as ease of purging. • The mouthpiece made of medical silicone for reducing jaw fatigue. • The joint between the mouthpiece/valve box and the corrugate must be swiveling sealed connection that rotates for a better fit.

Weight Belt: • Strong weight belt with a durable stainless steel quick release clip for left or right hand opening. Made from super tough nylon webbing.

Gloves: • Need the Gloves made of Standard Neoprene with glued and blind-stitched seams. • Should have been designed ergonomically to minimize hand fatigue on pre-curved fingers. • Must be Rubberized coating on palm for durability & added gip. • Able to adjust cinch closure at wrist.

Rash guard: • 0.5 mm thickness • The materials should help to keep warmth, activates blood microcirculation and provide a high level of comfort • Zero buoyancy • Breathable PU Membrane.

Dry bag: • Need 0.6mm Tarpaulin material bag with double sided PVC coating. • Waterproof seams to prevent wet gear from leaking. • Drain valve for rinsing gear and draining water. • Pack size : 68.6 x diam. 30.5 cm.

Knife: • Need dive knife with 10.8cm blade, 24.2cm overall length. • It should be made of stainless steel or high grade Beta Alloy Titanium. • Need Nylon with fiberglass fill handle and sheath for superior impact and abrasion resistance.

Hood: The hood should comfortably seal around the face and must have a purge system that allows trapped air to come out and prevents water from entering. It should have reflective prints on top for high visibility during dives.

Bag: • Easy to Transport: With collapsible compartment into a zippered pocket on the back of the regulator compartment . • It should be durable made up of good material. • It should be with atleast Two-years warranty. • Opening size: 34 x 13” diameter (86.5 x 33d cm) , when closed: 5x13” diameter (2.7 x 33d cm)

SCUBA Cylinder: 11.1 lit & 14.3 Kg and with good Valve Gas capacity: 2297 Litres.

Lead weights: Made of non corroded metal 1 K.g weight

Lead weights: Made of non corroded metal 2Kg weight

Underwater Slates: Compatible to write under the water with pencil and eraser.