PROVN OF HARD STANDING WITH PAVER BLOCKS NEAR P 177A ASHOKA BUILDING AND OTHER SANCTIONED WORK IN THE AREA OF AGE B R II UNDER GE NW KOCHI

Amount

M&L Surface dressing n exc 15 cm deep for soft /loose soil complete all as specified and directed by Engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed by Engr-in-charge.

M&L Machine pressed precast concrete interlocking paver blocks of white grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade including necessary polishing complete all as specified and directed by Engr-in-charge.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete block masonry type C1 (1:3:6) (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick on brick surfaces in 1:6 cement mortar complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charge.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters walk ways, railings frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.

M & L for preparation of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed by Engr-in-charge.

M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for oundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed by Engr-in-charge.

M&L PCC 1:4:8 type D-2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L Cement concrete Type B2 1:2:4,40mm graded aggregate in base of boundary pillars complete all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete of type B1, 1:2:4 (20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in 1:4 cement mortar complete all as specified and directed by Engr-in-charge.

Supply only chain link Ms galvanised fencing, including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed by Engr-in-charge.

S&F MS angle iron as in post struts in fencing incl cutting tops to shape as directed ,drilling holes,flat iron fillets,MS bars etc for securing chain link fencing complete all as specified and directed by Engr-in-charge.

M&L rendering 15mm thick on fair faces of brick/concrete surfaces in cm 1:4 finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exc 25cm, in soft/loose soil complete all as specified and directed by Engr-in-charge.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge.

M&L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge.

Preparation of new steel surface of any description or 10cm width or girth and applying 2 coat of aluminium paint over a coat of aluminium primer complete all as specified and directed by Engr-in-charge.

M&L PCC 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor complete all as specified and directed by Engr-in-charge.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and directed by Engr-in-charge.

M&L Providing Cement concrete of type B 1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in complete all as specified and directed by Engr-in-charge.

Excavating over areas, n exc 1.5 m deep and getting out and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

Excavating over areas, exceeding 1.5 m deep and getting out and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.

M&L PCC 1:3:6 type C-1 (20 mm graded aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick on brick surfaces (internal ) in 1:6 cement mortar finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-charge.

LAKSHMI BUILDERS

SUKU CONSTRUCTIONS

ANIE JOHN CONTRACTORS

MS BUILDERS

Albert Rebello and Company

Vidya constructions

K.V.GEORGE AND COMPANY

ST ANTONY CONSTRUCTIONS

M/s ANTONY THOMAS AND CO